提交 5b19c908 编写于 作者: P Paul Mundt

sh: Support for SH7770/SH7780 CPU subtypes.

Merge support for SH7770 and SH7780 SH-4A subtypes.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
上级 555ef196
......@@ -72,6 +72,7 @@ ENTRY(interrupt_table)
.long do_IRQ ! 1110
.long exception_error
! Internal hardware
#ifndef CONFIG_CPU_SUBTYPE_SH7780
.long do_IRQ ! TMU0 tuni0 /* 400 */
.long do_IRQ ! TMU1 tuni1
.long do_IRQ ! TMU2 tuni2
......@@ -379,5 +380,168 @@ ENTRY(interrupt_table)
.long exception_error ! 141 0x13a0
.long exception_error ! 142 0x13c0
.long exception_error ! 143 0x13e0
#elif defined(CONFIG_CPU_SUBTYPE_SH7770)
.long do_IRQ ! 50 0x840
.long do_IRQ ! 51 0x860
.long do_IRQ ! 52 0x880
.long do_IRQ ! 53 0x8a0
.long do_IRQ ! 54 0x8c0
.long do_IRQ ! 55 0x8e0
.long do_IRQ ! 56 0x900
.long do_IRQ ! 57 0x920
.long do_IRQ ! 58 0x940
.long do_IRQ ! 59 0x960
.long do_IRQ ! 60 0x980
.long do_IRQ ! 61 0x9a0
.long do_IRQ ! 62 0x9c0
.long do_IRQ ! 63 0x9e0
.long do_IRQ ! 64 0xa00
.long do_IRQ ! 65 0xa20
.long do_IRQ ! 66 0xa4d
.long do_IRQ ! 67 0xa60
.long do_IRQ ! 68 0xa80
.long do_IRQ ! 69 0xaa0
.long do_IRQ ! 70 0xac0
.long do_IRQ ! 71 0xae0
.long do_IRQ ! 72 0xb00
.long do_IRQ ! 73 0xb20
.long do_IRQ ! 74 0xb40
.long do_IRQ ! 75 0xb60
.long do_IRQ ! 76 0xb80
.long do_IRQ ! 77 0xba0
.long do_IRQ ! 78 0xbc0
.long do_IRQ ! 79 0xbe0
.long do_IRQ ! 80 0xc00
.long do_IRQ ! 81 0xc20
.long do_IRQ ! 82 0xc40
.long do_IRQ ! 83 0xc60
.long do_IRQ ! 84 0xc80
.long do_IRQ ! 85 0xca0
.long do_IRQ ! 86 0xcc0
.long do_IRQ ! 87 0xce0
.long do_IRQ ! 88 0xd00
.long do_IRQ ! 89 0xd20
.long do_IRQ ! 90 0xd40
.long do_IRQ ! 91 0xd60
.long do_IRQ ! 92 0xd80
.long do_IRQ ! 93 0xda0
.long do_IRQ ! 94 0xdc0
.long do_IRQ ! 95 0xde0
.long do_IRQ ! 96 0xe00
.long do_IRQ ! 97 0xe20
.long do_IRQ ! 98 0xe40
.long do_IRQ ! 99 0xe60
.long do_IRQ ! 100 0xe80
.long do_IRQ ! 101 0xea0
.long do_IRQ ! 102 0xec0
.long do_IRQ ! 103 0xee0
.long do_IRQ ! 104 0xf00
.long do_IRQ ! 105 0xf20
.long do_IRQ ! 106 0xf40
.long do_IRQ ! 107 0xf60
.long do_IRQ ! 108 0xf80
#endif
#else
.long exception_error /* 400 */
.long exception_error
.long exception_error
.long exception_error
.long do_IRQ ! RTC ati
.long do_IRQ ! pri
.long do_IRQ ! cui
.long exception_error
.long exception_error /* 500 */
.long exception_error
.long exception_error
.long do_IRQ ! WDT iti /* 560 */
.long do_IRQ ! TMU-ch0
.long do_IRQ ! TMU-ch1
.long do_IRQ ! TMU-ch2
.long do_IRQ ! ticpi2 /* 5E0 */
.long do_IRQ ! 32 Hitachi UDI /* 600 */
.long exception_error
.long do_IRQ ! 34 DMAC dmte0
.long do_IRQ ! 35 dmte1
.long do_IRQ ! 36 dmte2
.long do_IRQ ! 37 dmte3
.long do_IRQ ! 38 dmae
.long exception_error ! 39 /* 6E0 */
.long do_IRQ ! 40 SCIF-ch0 eri /* 700 */
.long do_IRQ ! 41 rxi
.long do_IRQ ! 42 bri
.long do_IRQ ! 43 txi
.long do_IRQ ! 44 DMAC dmte4 /* 780 */
.long do_IRQ ! 45 dmte5
.long do_IRQ ! 46 dmte6
.long do_IRQ ! 47 dmte7 /* 7E0 */
#if defined(CONFIG_SH_FPU)
.long do_fpu_state_restore ! 48 /* 800 */
.long do_fpu_state_restore ! 49 /* 820 */
#else
.long exception_error
.long exception_error
#endif
.long exception_error /* 840 */
.long exception_error
.long exception_error
.long exception_error
.long exception_error
.long exception_error
.long do_IRQ ! 56 CMT /* 900 */
.long exception_error
.long exception_error
.long exception_error
.long do_IRQ ! 60 HAC
.long exception_error
.long exception_error
.long exception_error
.long do_IRQ ! PCI serr /* A00 */
.long do_IRQ ! INTA
.long do_IRQ ! INTB
.long do_IRQ ! INTC
.long do_IRQ ! INTD
.long do_IRQ ! err
.long do_IRQ ! pwd3
.long do_IRQ ! pwd2
.long do_IRQ ! pwd1 /* B00 */
.long do_IRQ ! pwd0
.long exception_error
.long exception_error
.long do_IRQ ! SCIF-ch1 eri /* B80 */
.long do_IRQ ! rxi
.long do_IRQ ! bri
.long do_IRQ ! txi
.long do_IRQ ! SIOF /* C00 */
.long exception_error
.long exception_error
.long exception_error
.long do_IRQ ! HSPI /* C80 */
.long exception_error
.long exception_error
.long exception_error
.long do_IRQ ! MMCIF fatat /* D00 */
.long do_IRQ ! tran
.long do_IRQ ! err
.long do_IRQ ! frdy
.long do_IRQ ! DMAC dmint8 /* D80 */
.long do_IRQ ! dmint9
.long do_IRQ ! dmint10
.long do_IRQ ! dmint11
.long do_IRQ ! TMU-ch3 /* E00 */
.long do_IRQ ! TMU-ch4
.long do_IRQ ! TMU-ch5
.long exception_error
.long do_IRQ ! SSI
.long exception_error
.long exception_error
.long exception_error
.long do_IRQ ! FLCTL flste /* F00 */
.long do_IRQ ! fltend
.long do_IRQ ! fltrq0
.long do_IRQ ! fltrq1
.long do_IRQ ! GPIO gpioi0 /* F80 */
.long do_IRQ ! gpioi1
.long do_IRQ ! gpioi2
.long do_IRQ ! gpioi3
#endif
......@@ -78,6 +78,21 @@ int __init detect_cpu_and_cache_system(void)
cpu_data->dcache.ways = 4;
cpu_data->flags &= ~CPU_HAS_FPU;
break;
case 0x2001:
case 0x2004:
cpu_data->type = CPU_SH7770;
cpu_data->icache.ways = 4;
cpu_data->dcache.ways = 4;
break;
case 0x2006:
case 0x200A:
if (prr == 0x61)
cpu_data->type = CPU_SH7781;
else
cpu_data->type = CPU_SH7780;
cpu_data->icache.ways = 4;
cpu_data->dcache.ways = 4;
break;
case 0x8000:
cpu_data->type = CPU_ST40RA;
break;
......
......@@ -166,7 +166,9 @@ static struct sq_mapping *__sq_remap(struct sq_mapping *map)
ctrl_outl((pteh & MMU_VPN_MASK) | get_asid(), MMU_PTEH);
ptel = map->addr & PAGE_MASK;
#ifndef CONFIG_CPU_SUBTYPE_SH7780
ctrl_outl(((ptel >> 28) & 0xe) | (ptel & 0x1), MMU_PTEA);
#endif
pgprot = pgprot_noncached(PAGE_KERNEL);
......
......@@ -36,7 +36,9 @@ void update_mmu_cache(struct vm_area_struct * vma,
unsigned long vpn;
struct page *page;
unsigned long pfn;
#ifndef CONFIG_CPU_SUBTYPE_SH7780
unsigned long ptea;
#endif
/* Ptrace may call this routine. */
if (vma && current->active_mm != vma->vm_mm)
......@@ -59,10 +61,12 @@ void update_mmu_cache(struct vm_area_struct * vma,
ctrl_outl(vpn, MMU_PTEH);
pteval = pte_val(pte);
#ifndef CONFIG_CPU_SUBTYPE_SH7780
/* Set PTEA register */
/* TODO: make this look less hacky */
ptea = ((pteval >> 28) & 0xe) | (pteval & 0x1);
ctrl_outl(ptea, MMU_PTEA);
#endif
/* Set PTEL register */
pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
......
......@@ -32,6 +32,10 @@ static void __init check_bugs(void)
case CPU_SH7750 ... CPU_SH4_501:
*p++ = '4';
break;
case CPU_SH7770 ... CPU_SH7781:
*p++ = '4';
*p++ = 'a';
break;
default:
*p++ = '?';
*p++ = '!';
......
......@@ -22,7 +22,9 @@
#define CCR_CACHE_ICE 0x0100 /* Instruction Cache Enable */
#define CCR_CACHE_ICI 0x0800 /* IC Invalidate */
#define CCR_CACHE_IIX 0x8000 /* IC Index Enable */
#ifndef CONFIG_CPU_SUBTYPE_SH7780
#define CCR_CACHE_EMODE 0x80000000 /* EMODE Enable */
#endif
/* Default CCR setup: 8k+16k-byte cache,P1-wb,enable */
#define CCR_CACHE_ENABLE (CCR_CACHE_OCE|CCR_CACHE_ICE)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册