drm/i915: Add the structure of child_device_config in video BIOS tables.

Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

drivers/gpu/drm/i915/intel_bios.h

@@ -135,6 +135,86 @@ struct bdb_general_features {
 	u8 rsvd11:6; /* finish byte */
 } __attribute__((packed));
 
+/* pre-915 */
+#define GPIO_PIN_DVI_LVDS	0x03 /* "DVI/LVDS DDC GPIO pins" */
+#define GPIO_PIN_ADD_I2C	0x05 /* "ADDCARD I2C GPIO pins" */
+#define GPIO_PIN_ADD_DDC	0x04 /* "ADDCARD DDC GPIO pins" */
+#define GPIO_PIN_ADD_DDC_I2C	0x06 /* "ADDCARD DDC/I2C GPIO pins" */
+
+/* Pre 915 */
+#define DEVICE_TYPE_NONE	0x00
+#define DEVICE_TYPE_CRT		0x01
+#define DEVICE_TYPE_TV		0x09
+#define DEVICE_TYPE_EFP		0x12
+#define DEVICE_TYPE_LFP		0x22
+/* On 915+ */
+#define DEVICE_TYPE_CRT_DPMS		0x6001
+#define DEVICE_TYPE_CRT_DPMS_HOTPLUG	0x4001
+#define DEVICE_TYPE_TV_COMPOSITE	0x0209
+#define DEVICE_TYPE_TV_MACROVISION	0x0289
+#define DEVICE_TYPE_TV_RF_COMPOSITE	0x020c
+#define DEVICE_TYPE_TV_SVIDEO_COMPOSITE	0x0609
+#define DEVICE_TYPE_TV_SCART		0x0209
+#define DEVICE_TYPE_TV_CODEC_HOTPLUG_PWR 0x6009
+#define DEVICE_TYPE_EFP_HOTPLUG_PWR	0x6012
+#define DEVICE_TYPE_EFP_DVI_HOTPLUG_PWR	0x6052
+#define DEVICE_TYPE_EFP_DVI_I		0x6053
+#define DEVICE_TYPE_EFP_DVI_D_DUAL	0x6152
+#define DEVICE_TYPE_EFP_DVI_D_HDCP	0x60d2
+#define DEVICE_TYPE_OPENLDI_HOTPLUG_PWR	0x6062
+#define DEVICE_TYPE_OPENLDI_DUALPIX	0x6162
+#define DEVICE_TYPE_LFP_PANELLINK	0x5012
+#define DEVICE_TYPE_LFP_CMOS_PWR	0x5042
+#define DEVICE_TYPE_LFP_LVDS_PWR	0x5062
+#define DEVICE_TYPE_LFP_LVDS_DUAL	0x5162
+#define DEVICE_TYPE_LFP_LVDS_DUAL_HDCP	0x51e2
+
+#define DEVICE_CFG_NONE		0x00
+#define DEVICE_CFG_12BIT_DVOB	0x01
+#define DEVICE_CFG_12BIT_DVOC	0x02
+#define DEVICE_CFG_24BIT_DVOBC	0x09
+#define DEVICE_CFG_24BIT_DVOCB	0x0a
+#define DEVICE_CFG_DUAL_DVOB	0x11
+#define DEVICE_CFG_DUAL_DVOC	0x12
+#define DEVICE_CFG_DUAL_DVOBC	0x13
+#define DEVICE_CFG_DUAL_LINK_DVOBC	0x19
+#define DEVICE_CFG_DUAL_LINK_DVOCB	0x1a
+
+#define DEVICE_WIRE_NONE	0x00
+#define DEVICE_WIRE_DVOB	0x01
+#define DEVICE_WIRE_DVOC	0x02
+#define DEVICE_WIRE_DVOBC	0x03
+#define DEVICE_WIRE_DVOBB	0x05
+#define DEVICE_WIRE_DVOCC	0x06
+#define DEVICE_WIRE_DVOB_MASTER 0x0d
+#define DEVICE_WIRE_DVOC_MASTER 0x0e
+
+#define DEVICE_PORT_DVOA	0x00 /* none on 845+ */
+#define DEVICE_PORT_DVOB	0x01
+#define DEVICE_PORT_DVOC	0x02
+
+struct child_device_config {
+	u16 handle;
+	u16 device_type;
+	u8  device_id[10]; /* See DEVICE_TYPE_* above */
+	u16 addin_offset;
+	u8  dvo_port; /* See Device_PORT_* above */
+	u8  i2c_pin;
+	u8  slave_addr;
+	u8  ddc_pin;
+	u16 edid_ptr;
+	u8  dvo_cfg; /* See DEVICE_CFG_* above */
+	u8  dvo2_port;
+	u8  i2c2_pin;
+	u8  slave2_addr;
+	u8  ddc2_pin;
+	u8  capabilities;
+	u8  dvo_wiring;/* See DEVICE_WIRE_* above */
+	u8  dvo2_wiring;
+	u16 extended_type;
+	u8  dvo_function;
+} __attribute__((packed));
+
 struct bdb_general_definitions {
 	/* DDC GPIO */
 	u8 crt_ddc_gmbus_pin;
@@ -149,14 +229,19 @@ struct bdb_general_definitions {
 	u8 boot_display[2];
 	u8 child_dev_size;
 
-	/* device info */
-	u8 tv_or_lvds_info[33];
-	u8 dev1[33];
-	u8 dev2[33];
-	u8 dev3[33];
-	u8 dev4[33];
-	/* may be another device block here on some platforms */
-};
+	/*
+	 * Device info:
+	 * If TV is present, it'll be at devices[0].
+	 * LVDS will be next, either devices[0] or [1], if present.
+	 * On some platforms the number of device is 6. But could be as few as
+	 * 4 if both TV and LVDS are missing.
+	 * And the device num is related with the size of general definition
+	 * block. It is obtained by using the following formula:
+	 * number = (block_size - sizeof(bdb_general_definitions))/
+	 * 		sizeof(child_device_config);
+	 */
+	struct child_device_config devices[0];
+} __attribute__((packed));
 
 struct bdb_lvds_options {
 	u8 panel_type;