PCI: Always set prefetchable base/limit upper32 registers

Prior to 1f82de10 we always initialized the upper 32bits of the
prefetchable memory window, regardless of the address range used.
Now we only touch it for a >32bit address, which means the upper32
registers remain whatever the BIOS initialized them too.

It's valid for the BIOS to set the upper32 base/limit to
0xffffffff/0x00000000, which makes us program prefetchable ranges
like 0xffffffffabc00000 - 0x00000000abc00000

Revert the chunk of 1f82de10 that made this conditional so we always
write the upper32 registers and remove now unused pref_mem64 variable.
Signed-off-by: NAlex Williamson <alex.williamson@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

drivers/pci/setup-bus.c

@@ -140,7 +140,6 @@ static void pci_setup_bridge(struct pci_bus *bus)
 	struct resource *res;
 	struct pci_bus_region region;
 	u32 l, bu, lu, io_upper16;
-	int pref_mem64;
 
 	if (pci_is_enabled(bridge))
 		return;
@@ -194,7 +193,6 @@ static void pci_setup_bridge(struct pci_bus *bus)
 	pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, 0);
 
 	/* Set up PREF base/limit. */
-	pref_mem64 = 0;
 	bu = lu = 0;
 	res = bus->resource[2];
 	pcibios_resource_to_bus(bridge, &region, res);
@@ -202,7 +200,6 @@ static void pci_setup_bridge(struct pci_bus *bus)
 		l = (region.start >> 16) & 0xfff0;
 		l |= region.end & 0xfff00000;
 		if (res->flags & IORESOURCE_MEM_64) {
-			pref_mem64 = 1;
 			bu = upper_32_bits(region.start);
 			lu = upper_32_bits(region.end);
 		}
@@ -214,11 +211,9 @@ static void pci_setup_bridge(struct pci_bus *bus)
 	}
 	pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, l);
 
-	if (pref_mem64) {
-		/* Set the upper 32 bits of PREF base & limit. */
-		pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu);
-		pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu);
-	}
+	/* Set the upper 32 bits of PREF base & limit. */
+	pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu);
+	pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu);
 
 	pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, bus->bridge_ctl);
 }