提交 57abad25 编写于 作者: B Bryan O'Sullivan 提交者: Linus Torvalds

[PATCH] IB/ipath: fix lost interrupts on HT-400

Do an extra check to see if in-memory tail changed while processing packets,
and if so, going back through the loop again (but only once per call to
ipath_kreceive()).  In practice, this seems to be enough to guarantee that if
we crossed the clearing of an interrupt at start of ipath_intr with a
scheduled tail register update, that we'll process the "extra" packet that
lost the interrupt because we cleared it just as it was about to arrive.
Signed-off-by: NDave Olson <dave.olson@qlogic.com>
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 f5f99929
......@@ -870,7 +870,7 @@ void ipath_kreceive(struct ipath_devdata *dd)
const u32 maxcnt = dd->ipath_rcvhdrcnt * rsize; /* words */
u32 etail = -1, l, hdrqtail;
struct ips_message_header *hdr;
u32 eflags, i, etype, tlen, pkttot = 0, updegr=0;
u32 eflags, i, etype, tlen, pkttot = 0, updegr=0, reloop=0;
static u64 totcalls; /* stats, may eventually remove */
char emsg[128];
......@@ -885,9 +885,11 @@ void ipath_kreceive(struct ipath_devdata *dd)
goto bail;
l = dd->ipath_port0head;
if (l == (u32)le64_to_cpu(*dd->ipath_hdrqtailptr))
hdrqtail = (u32) le64_to_cpu(*dd->ipath_hdrqtailptr);
if (l == hdrqtail)
goto done;
reloop:
/* read only once at start for performance */
hdrqtail = (u32)le64_to_cpu(*dd->ipath_hdrqtailptr);
......@@ -1011,7 +1013,7 @@ void ipath_kreceive(struct ipath_devdata *dd)
*/
if (l == hdrqtail || (i && !(i&0xf))) {
u64 lval;
if (l == hdrqtail) /* want interrupt only on last */
if (l == hdrqtail) /* PE-800 interrupt only on last */
lval = dd->ipath_rhdrhead_intr_off | l;
else
lval = l;
......@@ -1024,6 +1026,23 @@ void ipath_kreceive(struct ipath_devdata *dd)
}
}
if (!dd->ipath_rhdrhead_intr_off && !reloop) {
/* HT-400 workaround; we can have a race clearing chip
* interrupt with another interrupt about to be delivered,
* and can clear it before it is delivered on the GPIO
* workaround. By doing the extra check here for the
* in-memory tail register updating while we were doing
* earlier packets, we "almost" guarantee we have covered
* that case.
*/
u32 hqtail = (u32)le64_to_cpu(*dd->ipath_hdrqtailptr);
if (hqtail != hdrqtail) {
hdrqtail = hqtail;
reloop = 1; /* loop 1 extra time at most */
goto reloop;
}
}
pkttot += i;
dd->ipath_port0head = l;
......
......@@ -766,7 +766,7 @@ irqreturn_t ipath_intr(int irq, void *data, struct pt_regs *regs)
u32 istat, chk0rcv = 0;
ipath_err_t estat = 0;
irqreturn_t ret;
u32 p0bits, oldhead;
u32 oldhead, curtail;
static unsigned unexpected = 0;
static const u32 port0rbits = (1U<<INFINIPATH_I_RCVAVAIL_SHIFT) |
(1U<<INFINIPATH_I_RCVURG_SHIFT);
......@@ -809,15 +809,16 @@ irqreturn_t ipath_intr(int irq, void *data, struct pt_regs *regs)
* lose intr for later packets that arrive while we are processing.
*/
oldhead = dd->ipath_port0head;
if (oldhead != (u32) le64_to_cpu(*dd->ipath_hdrqtailptr)) {
curtail = (u32)le64_to_cpu(*dd->ipath_hdrqtailptr);
if (oldhead != curtail) {
if (dd->ipath_flags & IPATH_GPIO_INTR) {
ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_clear,
(u64) (1 << 2));
p0bits = port0rbits | INFINIPATH_I_GPIO;
istat = port0rbits | INFINIPATH_I_GPIO;
}
else
p0bits = port0rbits;
ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, p0bits);
istat = port0rbits;
ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, istat);
ipath_kreceive(dd);
if (oldhead != dd->ipath_port0head) {
ipath_stats.sps_fastrcvint++;
......@@ -827,7 +828,6 @@ irqreturn_t ipath_intr(int irq, void *data, struct pt_regs *regs)
}
istat = ipath_read_kreg32(dd, dd->ipath_kregs->kr_intstatus);
p0bits = port0rbits;
if (unlikely(!istat)) {
ipath_stats.sps_nullintr++;
......@@ -890,19 +890,19 @@ irqreturn_t ipath_intr(int irq, void *data, struct pt_regs *regs)
else {
/* Clear GPIO status bit 2 */
ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_clear,
(u64) (1 << 2));
p0bits |= INFINIPATH_I_GPIO;
(u64) (1 << 2));
chk0rcv = 1;
}
}
chk0rcv |= istat & p0bits;
chk0rcv |= istat & port0rbits;
/*
* clear the ones we will deal with on this round
* We clear it early, mostly for receive interrupts, so we
* know the chip will have seen this by the time we process
* the queue, and will re-interrupt if necessary. The processor
* itself won't take the interrupt again until we return.
* Clear the interrupt bits we found set, unless they are receive
* related, in which case we already cleared them above, and don't
* want to clear them again, because we might lose an interrupt.
* Clear it early, so we "know" know the chip will have seen this by
* the time we process the queue, and will re-interrupt if necessary.
* The processor itself won't take the interrupt again until we return.
*/
ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, istat);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册