提交 542f869f 编写于 作者: R Russell King 提交者: Russell King

Merge branch 'for-rmk' of git://gitorious.org/linux-gemini/mainline into devel

Conflicts:
	arch/arm/mm/Kconfig
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
......@@ -502,6 +502,13 @@ P: Richard Purdie
M: rpurdie@rpsys.net
S: Maintained
ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE
P: Paulius Zaleckas
M: paulius.zaleckas@teltonika.lt
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
T: git gitorious.org/linux-gemini/mainline.git
S: Maintained
ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
P: Daniel Ribeiro
M: drwyrm@gmail.com
......@@ -513,6 +520,12 @@ L: openezx-devel@lists.openezx.org (subscribers-only)
W: http://www.openezx.org/
S: Maintained
ARM/FARADAY FA526 PORT
P: Paulius Zaleckas
M: paulius.zaleckas@teltonika.lt
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
P: Sascha Hauer
M: kernel@pengutronix.de
......
......@@ -276,6 +276,14 @@ config ARCH_EP93XX
help
This enables support for the Cirrus EP93xx series of CPUs.
config ARCH_GEMINI
bool "Cortina Systems Gemini"
select CPU_FA526
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
Support for the Cortina Systems Gemini family SoCs
config ARCH_FOOTBRIDGE
bool "FootBridge"
select CPU_SA110
......@@ -616,6 +624,8 @@ source "arch/arm/mach-ep93xx/Kconfig"
source "arch/arm/mach-footbridge/Kconfig"
source "arch/arm/mach-gemini/Kconfig"
source "arch/arm/mach-integrator/Kconfig"
source "arch/arm/mach-iop32x/Kconfig"
......
......@@ -72,6 +72,7 @@ tune-$(CONFIG_CPU_ARM920T) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM922T) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM925T) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM926T) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_FA526) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_SA110) :=-mtune=strongarm110
tune-$(CONFIG_CPU_SA1100) :=-mtune=strongarm1100
tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
......@@ -113,6 +114,7 @@ endif
plat-$(CONFIG_PLAT_PXA) := pxa
machine-$(CONFIG_ARCH_L7200) := l7200
machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
machine-$(CONFIG_ARCH_GEMINI) := gemini
textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
machine-$(CONFIG_ARCH_CLPS711X) := clps711x
machine-$(CONFIG_ARCH_IOP32X) := iop32x
......
......@@ -465,6 +465,20 @@ __armv7_mmu_cache_on:
mcr p15, 0, r0, c7, c5, 4 @ ISB
mov pc, r12
__fa526_cache_on:
mov r12, lr
bl __setup_mmu
mov r0, #0
mcr p15, 0, r0, c7, c7, 0 @ Invalidate whole cache
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
mcr p15, 0, r0, c8, c7, 0 @ flush UTLB
mrc p15, 0, r0, c1, c0, 0 @ read control reg
orr r0, r0, #0x1000 @ I-cache enable
bl __common_mmu_cache_on
mov r0, #0
mcr p15, 0, r0, c8, c7, 0 @ flush UTLB
mov pc, r12
__arm6_mmu_cache_on:
mov r12, lr
bl __setup_mmu
......@@ -654,6 +668,12 @@ proc_types:
b __armv4_mmu_cache_off
b __armv5tej_mmu_cache_flush
.word 0x66015261 @ FA526
.word 0xff01fff1
b __fa526_cache_on
b __armv4_mmu_cache_off
b __fa526_cache_flush
@ These match on the architecture ID
.word 0x00020000 @ ARMv4T
......@@ -793,6 +813,12 @@ __armv4_mpu_cache_flush:
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
__fa526_cache_flush:
mov r1, #0
mcr p15, 0, r1, c7, c14, 0 @ clean and invalidate D cache
mcr p15, 0, r1, c7, c5, 0 @ flush I cache
mcr p15, 0, r1, c7, c10, 4 @ drain WB
mov pc, lr
__armv6_mmu_cache_flush:
mov r1, #0
......
......@@ -46,6 +46,14 @@
# define MULTI_CACHE 1
#endif
#if defined(CONFIG_CPU_FA526)
# ifdef _CACHE
# define MULTI_CACHE 1
# else
# define _CACHE fa
# endif
#endif
#if defined(CONFIG_CPU_ARM926T)
# ifdef _CACHE
# define MULTI_CACHE 1
......
......@@ -76,6 +76,14 @@
# endif
#endif
#ifdef CONFIG_CPU_COPY_FA
# ifdef _USER
# define MULTI_USER 1
# else
# define _USER fa
# endif
#endif
#ifdef CONFIG_CPU_SA1100
# ifdef _USER
# define MULTI_USER 1
......
......@@ -89,6 +89,14 @@
# define CPU_NAME cpu_arm922
# endif
# endif
# ifdef CONFIG_CPU_FA526
# ifdef CPU_NAME
# undef MULTI_CPU
# define MULTI_CPU
# else
# define CPU_NAME cpu_fa526
# endif
# endif
# ifdef CONFIG_CPU_ARM925T
# ifdef CPU_NAME
# undef MULTI_CPU
......
......@@ -125,6 +125,12 @@ extern unsigned int user_debug;
: : "r" (0) : "memory")
#define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
: : "r" (0) : "memory")
#elif defined(CONFIG_CPU_FA526)
#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \
: : "r" (0) : "memory")
#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
: : "r" (0) : "memory")
#define dmb() __asm__ __volatile__ ("" : : : "memory")
#else
#define isb() __asm__ __volatile__ ("" : : : "memory")
#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
......
......@@ -39,6 +39,7 @@
#define TLB_V6_D_ASID (1 << 17)
#define TLB_V6_I_ASID (1 << 18)
#define TLB_BTB (1 << 28)
#define TLB_L2CLEAN_FR (1 << 29) /* Feroceon */
#define TLB_DCLEAN (1 << 30)
#define TLB_WB (1 << 31)
......@@ -53,6 +54,7 @@
* v4wb - ARMv4 with write buffer without I TLB flush entry instruction
* v4wbi - ARMv4 with write buffer with I TLB flush entry instruction
* fr - Feroceon (v4wbi with non-outer-cacheable page table walks)
* fa - Faraday (v4 with write buffer with UTLB and branch target buffer (BTB))
* v6wbi - ARMv6 with write buffer with I TLB flush entry instruction
* v7wbi - identical to v6wbi
*/
......@@ -89,6 +91,22 @@
# define v4_always_flags (-1UL)
#endif
#define fa_tlb_flags (TLB_WB | TLB_BTB | TLB_DCLEAN | \
TLB_V4_U_FULL | TLB_V4_U_PAGE)
#ifdef CONFIG_CPU_TLB_FA
# define fa_possible_flags fa_tlb_flags
# define fa_always_flags fa_tlb_flags
# ifdef _TLB
# define MULTI_TLB 1
# else
# define _TLB fa
# endif
#else
# define fa_possible_flags 0
# define fa_always_flags (-1UL)
#endif
#define v4wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \
TLB_V4_I_FULL | TLB_V4_D_FULL | \
TLB_V4_I_PAGE | TLB_V4_D_PAGE)
......@@ -140,7 +158,7 @@
# define v4wb_always_flags (-1UL)
#endif
#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \
#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
TLB_V6_I_FULL | TLB_V6_D_FULL | \
TLB_V6_I_PAGE | TLB_V6_D_PAGE | \
TLB_V6_I_ASID | TLB_V6_D_ASID)
......@@ -267,6 +285,7 @@ extern struct cpu_tlb_fns cpu_tlb;
v4wbi_possible_flags | \
fr_possible_flags | \
v4wb_possible_flags | \
fa_possible_flags | \
v6wbi_possible_flags | \
v7wbi_possible_flags)
......@@ -275,6 +294,7 @@ extern struct cpu_tlb_fns cpu_tlb;
v4wbi_always_flags & \
fr_always_flags & \
v4wb_always_flags & \
fa_always_flags & \
v6wbi_always_flags & \
v7wbi_always_flags)
......@@ -297,9 +317,7 @@ static inline void local_flush_tlb_all(void)
if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL))
asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
TLB_V6_I_PAGE | TLB_V6_D_PAGE |
TLB_V6_I_ASID | TLB_V6_D_ASID)) {
if (tlb_flag(TLB_BTB)) {
/* flush the branch target cache */
asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
dsb();
......@@ -334,9 +352,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
if (tlb_flag(TLB_V6_I_ASID))
asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc");
if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
TLB_V6_I_PAGE | TLB_V6_D_PAGE |
TLB_V6_I_ASID | TLB_V6_D_ASID)) {
if (tlb_flag(TLB_BTB)) {
/* flush the branch target cache */
asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
dsb();
......@@ -374,9 +390,7 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
if (tlb_flag(TLB_V6_I_PAGE))
asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
TLB_V6_I_PAGE | TLB_V6_D_PAGE |
TLB_V6_I_ASID | TLB_V6_D_ASID)) {
if (tlb_flag(TLB_BTB)) {
/* flush the branch target cache */
asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
dsb();
......@@ -411,9 +425,7 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
if (tlb_flag(TLB_V6_I_PAGE))
asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
TLB_V6_I_PAGE | TLB_V6_D_PAGE |
TLB_V6_I_ASID | TLB_V6_D_ASID)) {
if (tlb_flag(TLB_BTB)) {
/* flush the branch target cache */
asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
dsb();
......
if ARCH_GEMINI
menu "Cortina Systems Gemini Implementations"
config MACH_RUT100
bool "Teltonika RUT100"
select GEMINI_MEM_SWAP
help
Say Y here if you intend to run this kernel on a
Teltonika 3G Router RUT100.
endmenu
config GEMINI_MEM_SWAP
bool "Gemini memory is swapped"
help
Say Y here if Gemini memory is swapped by bootloader.
endif
#
# Makefile for the linux kernel.
#
# Object file lists.
obj-y := irq.o mm.o time.o devices.o gpio.o
# Board-specific support
obj-$(CONFIG_MACH_RUT100) += board-rut1xx.o
ifeq ($(CONFIG_GEMINI_MEM_SWAP),y)
zreladdr-y := 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
else
zreladdr-y := 0x10008000
params_phys-y := 0x10000100
initrd_phys-y := 0x10800000
endif
/*
* Support for Teltonika RUT1xx
*
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "common.h"
static struct gpio_keys_button rut1xx_keys[] = {
{
.code = KEY_SETUP,
.gpio = 60,
.active_low = 1,
.desc = "Reset to defaults",
.type = EV_KEY,
},
};
static struct gpio_keys_platform_data rut1xx_keys_data = {
.buttons = rut1xx_keys,
.nbuttons = ARRAY_SIZE(rut1xx_keys),
};
static struct platform_device rut1xx_keys_device = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &rut1xx_keys_data,
},
};
static struct gpio_led rut100_leds[] = {
{
.name = "Power",
.default_trigger = "heartbeat",
.gpio = 17,
},
{
.name = "GSM",
.default_trigger = "default-on",
.gpio = 7,
.active_low = 1,
},
};
static struct gpio_led_platform_data rut100_leds_data = {
.num_leds = ARRAY_SIZE(rut100_leds),
.leds = rut100_leds,
};
static struct platform_device rut1xx_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &rut100_leds_data,
},
};
static struct sys_timer rut1xx_timer = {
.init = gemini_timer_init,
};
static void __init rut1xx_init(void)
{
gemini_gpio_init();
platform_register_uart();
platform_register_pflash(SZ_8M, NULL, 0);
platform_device_register(&rut1xx_leds);
platform_device_register(&rut1xx_keys_device);
}
MACHINE_START(RUT100, "Teltonika RUT100")
.phys_io = 0x7fffc000,
.io_pg_offst = ((0xffffc000) >> 18) & 0xfffc,
.boot_params = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
.timer = &rut1xx_timer,
.init_machine = rut1xx_init,
MACHINE_END
/*
* Common Gemini architecture functions
*
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __GEMINI_COMMON_H__
#define __GEMINI_COMMON_H__
struct mtd_partition;
extern void gemini_map_io(void);
extern void gemini_init_irq(void);
extern void gemini_timer_init(void);
extern void gemini_gpio_init(void);
/* Common platform devices registration functions */
extern int platform_register_uart(void);
extern int platform_register_pflash(unsigned int size,
struct mtd_partition *parts,
unsigned int nr_parts);
#endif /* __GEMINI_COMMON_H__ */
/*
* Common devices definition for Gemini
*
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/global_reg.h>
static struct plat_serial8250_port serial_platform_data[] = {
{
.membase = (void *)IO_ADDRESS(GEMINI_UART_BASE),
.mapbase = GEMINI_UART_BASE,
.irq = IRQ_UART,
.uartclk = UART_CLK,
.regshift = 2,
.iotype = UPIO_MEM,
.type = PORT_16550A,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_FIXED_TYPE,
},
{},
};
static struct platform_device serial_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = serial_platform_data,
},
};
int platform_register_uart(void)
{
return platform_device_register(&serial_device);
}
static struct resource flash_resource = {
.start = GEMINI_FLASH_BASE,
.flags = IORESOURCE_MEM,
};
static struct physmap_flash_data pflash_platform_data = {};
static struct platform_device pflash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &pflash_platform_data,
},
.resource = &flash_resource,
.num_resources = 1,
};
int platform_register_pflash(unsigned int size, struct mtd_partition *parts,
unsigned int nr_parts)
{
unsigned int reg;
reg = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_STATUS);
if ((reg & FLASH_TYPE_MASK) != FLASH_TYPE_PARALLEL)
return -ENXIO;
if (reg & FLASH_WIDTH_16BIT)
pflash_platform_data.width = 2;
else
pflash_platform_data.width = 1;
/* enable parallel flash pins and disable others */
reg = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_MISC_CTRL);
reg &= ~PFLASH_PADS_DISABLE;
reg |= SFLASH_PADS_DISABLE | NAND_PADS_DISABLE;
__raw_writel(reg, IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_MISC_CTRL);
flash_resource.end = flash_resource.start + size - 1;
pflash_platform_data.parts = parts;
pflash_platform_data.nr_parts = nr_parts;
return platform_device_register(&pflash_device);
}
/*
* Gemini gpiochip and interrupt routines
*
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* Based on plat-mxc/gpio.c:
* MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#define GPIO_BASE(x) IO_ADDRESS(GEMINI_GPIO_BASE(x))
/* GPIO registers definition */
#define GPIO_DATA_OUT 0x0
#define GPIO_DATA_IN 0x4
#define GPIO_DIR 0x8
#define GPIO_DATA_SET 0x10
#define GPIO_DATA_CLR 0x14
#define GPIO_PULL_EN 0x18
#define GPIO_PULL_TYPE 0x1C
#define GPIO_INT_EN 0x20
#define GPIO_INT_STAT 0x24
#define GPIO_INT_MASK 0x2C
#define GPIO_INT_CLR 0x30
#define GPIO_INT_TYPE 0x34
#define GPIO_INT_BOTH_EDGE 0x38
#define GPIO_INT_LEVEL 0x3C
#define GPIO_DEBOUNCE_EN 0x40
#define GPIO_DEBOUNCE_PRESCALE 0x44
#define GPIO_PORT_NUM 3
static void _set_gpio_irqenable(unsigned int base, unsigned int index,
int enable)
{
unsigned int reg;
reg = __raw_readl(base + GPIO_INT_EN);
reg = (reg & (~(1 << index))) | (!!enable << index);
__raw_writel(reg, base + GPIO_INT_EN);
}
static void gpio_ack_irq(unsigned int irq)
{
unsigned int gpio = irq_to_gpio(irq);
unsigned int base = GPIO_BASE(gpio / 32);
__raw_writel(1 << (gpio % 32), base + GPIO_INT_CLR);
}
static void gpio_mask_irq(unsigned int irq)
{
unsigned int gpio = irq_to_gpio(irq);
unsigned int base = GPIO_BASE(gpio / 32);
_set_gpio_irqenable(base, gpio % 32, 0);
}
static void gpio_unmask_irq(unsigned int irq)
{
unsigned int gpio = irq_to_gpio(irq);
unsigned int base = GPIO_BASE(gpio / 32);
_set_gpio_irqenable(base, gpio % 32, 1);
}
static int gpio_set_irq_type(unsigned int irq, unsigned int type)
{
unsigned int gpio = irq_to_gpio(irq);
unsigned int gpio_mask = 1 << (gpio % 32);
unsigned int base = GPIO_BASE(gpio / 32);
unsigned int reg_both, reg_level, reg_type;
reg_type = __raw_readl(base + GPIO_INT_TYPE);
reg_level = __raw_readl(base + GPIO_INT_BOTH_EDGE);
reg_both = __raw_readl(base + GPIO_INT_BOTH_EDGE);
switch (type) {
case IRQ_TYPE_EDGE_BOTH:
reg_type &= ~gpio_mask;
reg_both |= gpio_mask;
break;
case IRQ_TYPE_EDGE_RISING:
reg_type &= ~gpio_mask;
reg_both &= ~gpio_mask;
reg_level &= ~gpio_mask;
break;
case IRQ_TYPE_EDGE_FALLING:
reg_type &= ~gpio_mask;
reg_both &= ~gpio_mask;
reg_level |= gpio_mask;
break;
case IRQ_TYPE_LEVEL_HIGH:
reg_type |= gpio_mask;
reg_level &= ~gpio_mask;
break;
case IRQ_TYPE_LEVEL_LOW:
reg_type |= gpio_mask;
reg_level |= gpio_mask;
break;
default:
return -EINVAL;
}
__raw_writel(reg_type, base + GPIO_INT_TYPE);
__raw_writel(reg_level, base + GPIO_INT_BOTH_EDGE);
__raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE);
gpio_ack_irq(irq);
return 0;
}
static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned int gpio_irq_no, irq_stat;
unsigned int port = (unsigned int)get_irq_data(irq);
irq_stat = __raw_readl(GPIO_BASE(port) + GPIO_INT_STAT);
gpio_irq_no = GPIO_IRQ_BASE + port * 32;
for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
if ((irq_stat & 1) == 0)
continue;
BUG_ON(!(irq_desc[gpio_irq_no].handle_irq));
irq_desc[gpio_irq_no].handle_irq(gpio_irq_no,
&irq_desc[gpio_irq_no]);
}
}
static struct irq_chip gpio_irq_chip = {
.name = "GPIO",
.ack = gpio_ack_irq,
.mask = gpio_mask_irq,
.unmask = gpio_unmask_irq,
.set_type = gpio_set_irq_type,
};
static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
int dir)
{
unsigned int base = GPIO_BASE(offset / 32);
unsigned int reg;
reg = __raw_readl(base + GPIO_DIR);
if (dir)
reg |= 1 << (offset % 32);
else
reg &= ~(1 << (offset % 32));
__raw_writel(reg, base + GPIO_DIR);
}
static void gemini_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
unsigned int base = GPIO_BASE(offset / 32);
if (value)
__raw_writel(1 << (offset % 32), base + GPIO_DATA_SET);
else
__raw_writel(1 << (offset % 32), base + GPIO_DATA_CLR);
}
static int gemini_gpio_get(struct gpio_chip *chip, unsigned offset)
{
unsigned int base = GPIO_BASE(offset / 32);
return (__raw_readl(base + GPIO_DATA_IN) >> (offset % 32)) & 1;
}
static int gemini_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
_set_gpio_direction(chip, offset, 0);
return 0;
}
static int gemini_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
int value)
{
_set_gpio_direction(chip, offset, 1);
gemini_gpio_set(chip, offset, value);
return 0;
}
static struct gpio_chip gemini_gpio_chip = {
.label = "Gemini",
.direction_input = gemini_gpio_direction_input,
.get = gemini_gpio_get,
.direction_output = gemini_gpio_direction_output,
.set = gemini_gpio_set,
.base = 0,
.ngpio = GPIO_PORT_NUM * 32,
};
void __init gemini_gpio_init(void)
{
int i, j;
for (i = 0; i < GPIO_PORT_NUM; i++) {
/* disable, unmask and clear all interrupts */
__raw_writel(0x0, GPIO_BASE(i) + GPIO_INT_EN);
__raw_writel(0x0, GPIO_BASE(i) + GPIO_INT_MASK);
__raw_writel(~0x0, GPIO_BASE(i) + GPIO_INT_CLR);
for (j = GPIO_IRQ_BASE + i * 32;
j < GPIO_IRQ_BASE + (i + 1) * 32; j++) {
set_irq_chip(j, &gpio_irq_chip);
set_irq_handler(j, handle_edge_irq);
set_irq_flags(j, IRQF_VALID);
}
set_irq_chained_handler(IRQ_GPIO(i), gpio_irq_handler);
set_irq_data(IRQ_GPIO(i), (void *)i);
}
BUG_ON(gpiochip_add(&gemini_gpio_chip));
}
/*
* Debugging macro include header
*
* Copyright (C) 1994-1999 Russell King
* Copyright (C) 2001-2006 Storlink, Corp.
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <mach/hardware.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =GEMINI_UART_BASE @ physical
ldrne \rx, =IO_ADDRESS(GEMINI_UART_BASE) @ virtual
.endm
#define UART_SHIFT 2
#define FLOW_CONTROL
#include <asm/hardware/debug-8250.S>
/*
* Low-level IRQ helper macros for Gemini platform.
*
* Copyright (C) 2001-2006 Storlink, Corp.
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <mach/hardware.h>
#define IRQ_STATUS 0x14
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, =IO_ADDRESS(GEMINI_INTERRUPT_BASE + IRQ_STATUS)
ldr \irqnr, [\irqstat]
cmp \irqnr, #0
beq 2313f
mov \tmp, \irqnr
mov \irqnr, #0
2312:
tst \tmp, #1
bne 2313f
add \irqnr, \irqnr, #1
mov \tmp, \tmp, lsr #1
cmp \irqnr, #31
bcc 2312b
2313:
.endm
/*
* This file contains the hardware definitions for Gemini.
*
* Copyright (C) 2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __MACH_GLOBAL_REG_H
#define __MACH_GLOBAL_REG_H
/* Global Word ID Register*/
#define GLOBAL_ID 0x00
#define CHIP_ID(reg) ((reg) >> 8)
#define CHIP_REVISION(reg) ((reg) & 0xFF)
/* Global Status Register */
#define GLOBAL_STATUS 0x04
#define CPU_BIG_ENDIAN (1 << 31)
#define PLL_OSC_30M (1 << 30) /* else 60MHz */
#define OPERATION_MODE_MASK (0xF << 26)
#define OPM_IDDQ (0xF << 26)
#define OPM_NAND (0xE << 26)
#define OPM_RING (0xD << 26)
#define OPM_DIRECT_BOOT (0xC << 26)
#define OPM_USB1_PHY_TEST (0xB << 26)
#define OPM_USB0_PHY_TEST (0xA << 26)
#define OPM_SATA1_PHY_TEST (0x9 << 26)
#define OPM_SATA0_PHY_TEST (0x8 << 26)
#define OPM_ICE_ARM (0x7 << 26)
#define OPM_ICE_FARADAY (0x6 << 26)
#define OPM_PLL_BYPASS (0x5 << 26)
#define OPM_DEBUG (0x4 << 26)
#define OPM_BURN_IN (0x3 << 26)
#define OPM_MBIST (0x2 << 26)
#define OPM_SCAN (0x1 << 26)
#define OPM_REAL (0x0 << 26)
#define FLASH_TYPE_MASK (0x3 << 24)
#define FLASH_TYPE_NAND_2K (0x3 << 24)
#define FLASH_TYPE_NAND_512 (0x2 << 24)
#define FLASH_TYPE_PARALLEL (0x1 << 24)
#define FLASH_TYPE_SERIAL (0x0 << 24)
/* if parallel */
#define FLASH_WIDTH_16BIT (1 << 23) /* else 8 bit */
/* if serial */
#define FLASH_ATMEL (1 << 23) /* else STM */
#define FLASH_SIZE_MASK (0x3 << 21)
#define NAND_256M (0x3 << 21) /* and more */
#define NAND_128M (0x2 << 21)
#define NAND_64M (0x1 << 21)
#define NAND_32M (0x0 << 21)
#define ATMEL_16M (0x3 << 21) /* and more */
#define ATMEL_8M (0x2 << 21)
#define ATMEL_4M_2M (0x1 << 21)
#define ATMEL_1M (0x0 << 21) /* and less */
#define STM_32M (1 << 22) /* and more */
#define STM_16M (0 << 22) /* and less */
#define FLASH_PARALLEL_HIGH_PIN_CNT (1 << 20) /* else low pin cnt */
#define CPU_AHB_RATIO_MASK (0x3 << 18)
#define CPU_AHB_1_1 (0x0 << 18)
#define CPU_AHB_3_2 (0x1 << 18)
#define CPU_AHB_24_13 (0x2 << 18)
#define CPU_AHB_2_1 (0x3 << 18)
#define REG_TO_AHB_SPEED(reg) ((((reg) >> 15) & 0x7) * 10 + 130)
#define AHB_SPEED_TO_REG(x) ((((x - 130)) / 10) << 15)
/* it is posible to override some settings, use >> OVERRIDE_xxxx_SHIFT */
#define OVERRIDE_FLASH_TYPE_SHIFT 16
#define OVERRIDE_FLASH_WIDTH_SHIFT 16
#define OVERRIDE_FLASH_SIZE_SHIFT 16
#define OVERRIDE_CPU_AHB_RATIO_SHIFT 15
#define OVERRIDE_AHB_SPEED_SHIFT 15
/* Global PLL Control Register */
#define GLOBAL_PLL_CTRL 0x08
#define PLL_BYPASS (1 << 31)
#define PLL_POWER_DOWN (1 << 8)
#define PLL_CONTROL_Q (0x1F << 0)
/* Global Soft Reset Control Register */
#define GLOBAL_RESET 0x0C
#define RESET_GLOBAL (1 << 31)
#define RESET_CPU1 (1 << 30)
#define RESET_TVE (1 << 28)
#define RESET_SATA1 (1 << 27)
#define RESET_SATA0 (1 << 26)
#define RESET_CIR (1 << 25)
#define RESET_EXT_DEV (1 << 24)
#define RESET_WD (1 << 23)
#define RESET_GPIO2 (1 << 22)
#define RESET_GPIO1 (1 << 21)
#define RESET_GPIO0 (1 << 20)
#define RESET_SSP (1 << 19)
#define RESET_UART (1 << 18)
#define RESET_TIMER (1 << 17)
#define RESET_RTC (1 << 16)
#define RESET_INT1 (1 << 15)
#define RESET_INT0 (1 << 14)
#define RESET_LCD (1 << 13)
#define RESET_LPC (1 << 12)
#define RESET_APB (1 << 11)
#define RESET_DMA (1 << 10)
#define RESET_USB1 (1 << 9)
#define RESET_USB0 (1 << 8)
#define RESET_PCI (1 << 7)
#define RESET_GMAC1 (1 << 6)
#define RESET_GMAC0 (1 << 5)
#define RESET_SECURITY (1 << 4)
#define RESET_RAID (1 << 3)
#define RESET_IDE (1 << 2)
#define RESET_FLASH (1 << 1)
#define RESET_DRAM (1 << 0)
/* Global IO Pad Driving Capability Control Register */
#define GLOBAL_IO_DRIVING_CTRL 0x10
#define DRIVING_CURRENT_MASK 0x3
/* here 00-4mA, 01-8mA, 10-12mA, 11-16mA */
#define GPIO1_PADS_31_28_SHIFT 28
#define GPIO0_PADS_31_16_SHIFT 26
#define GPIO0_PADS_15_0_SHIFT 24
#define PCI_AND_EXT_RESET_PADS_SHIFT 22
#define IDE_PADS_SHIFT 20
#define GMAC1_PADS_SHIFT 18
#define GMAC0_PADS_SHIFT 16
/* DRAM is not in mA and poorly documented */
#define DRAM_CLOCK_PADS_SHIFT 8
#define DRAM_DATA_PADS_SHIFT 4
#define DRAM_CONTROL_PADS_SHIFT 0
/* Global IO Pad Slew Rate Control Register */
#define GLOBAL_IO_SLEW_RATE_CTRL 0x14
#define GPIO1_PADS_31_28_SLOW (1 << 10)
#define GPIO0_PADS_31_16_SLOW (1 << 9)
#define GPIO0_PADS_15_0_SLOW (1 << 8)
#define PCI_PADS_SLOW (1 << 7)
#define IDE_PADS_SLOW (1 << 6)
#define GMAC1_PADS_SLOW (1 << 5)
#define GMAC0_PADS_SLOW (1 << 4)
#define DRAM_CLOCK_PADS_SLOW (1 << 1)
#define DRAM_IO_PADS_SLOW (1 << 0)
/*
* General skew control defines
* 16 steps, each step is around 0.2ns
*/
#define SKEW_MASK 0xF
/* Global IDE PAD Skew Control Register */
#define GLOBAL_IDE_SKEW_CTRL 0x18
#define IDE1_HOST_STROBE_DELAY_SHIFT 28
#define IDE1_DEVICE_STROBE_DELAY_SHIFT 24
#define IDE1_OUTPUT_IO_SKEW_SHIFT 20
#define IDE1_INPUT_IO_SKEW_SHIFT 16
#define IDE0_HOST_STROBE_DELAY_SHIFT 12
#define IDE0_DEVICE_STROBE_DELAY_SHIFT 8
#define IDE0_OUTPUT_IO_SKEW_SHIFT 4
#define IDE0_INPUT_IO_SKEW_SHIFT 0
/* Global GMAC Control Pad Skew Control Register */
#define GLOBAL_GMAC_CTRL_SKEW_CTRL 0x1C
#define GMAC1_TXC_SKEW_SHIFT 28
#define GMAC1_TXEN_SKEW_SHIFT 24
#define GMAC1_RXC_SKEW_SHIFT 20
#define GMAC1_RXDV_SKEW_SHIFT 16
#define GMAC0_TXC_SKEW_SHIFT 12
#define GMAC0_TXEN_SKEW_SHIFT 8
#define GMAC0_RXC_SKEW_SHIFT 4
#define GMAC0_RXDV_SKEW_SHIFT 0
/* Global GMAC0 Data PAD Skew Control Register */
#define GLOBAL_GMAC0_DATA_SKEW_CTRL 0x20
/* Global GMAC1 Data PAD Skew Control Register */
#define GLOBAL_GMAC1_DATA_SKEW_CTRL 0x24
#define GMAC_TXD_SKEW_SHIFT(x) (((x) * 4) + 16)
#define GMAC_RXD_SKEW_SHIFT(x) ((x) * 4)
/* CPU has two AHB busses. */
/* Global Arbitration0 Control Register */
#define GLOBAL_ARBITRATION0_CTRL 0x28
#define BOOT_CONTROLLER_HIGH_PRIO (1 << 3)
#define DMA_BUS1_HIGH_PRIO (1 << 2)
#define CPU0_HIGH_PRIO (1 << 0)
/* Global Arbitration1 Control Register */
#define GLOBAL_ARBITRATION1_CTRL 0x2C
#define TVE_HIGH_PRIO (1 << 9)
#define PCI_HIGH_PRIO (1 << 8)
#define USB1_HIGH_PRIO (1 << 7)
#define USB0_HIGH_PRIO (1 << 6)
#define GMAC1_HIGH_PRIO (1 << 5)
#define GMAC0_HIGH_PRIO (1 << 4)
#define SECURITY_HIGH_PRIO (1 << 3)
#define RAID_HIGH_PRIO (1 << 2)
#define IDE_HIGH_PRIO (1 << 1)
#define DMA_BUS2_HIGH_PRIO (1 << 0)
/* Common bits for both arbitration registers */
#define BURST_LENGTH_SHIFT 16
#define BURST_LENGTH_MASK (0x3F << 16)
/* Miscellaneous Control Register */
#define GLOBAL_MISC_CTRL 0x30
#define MEMORY_SPACE_SWAP (1 << 31)
#define USB1_PLUG_MINIB (1 << 30) /* else plug is mini-A */
#define USB0_PLUG_MINIB (1 << 29)
#define GMAC_GMII (1 << 28)
#define GMAC_1_ENABLE (1 << 27)
/* TODO: define ATA/SATA bits */
#define USB1_VBUS_ON (1 << 23)
#define USB0_VBUS_ON (1 << 22)
#define APB_CLKOUT_ENABLE (1 << 21)
#define TVC_CLKOUT_ENABLE (1 << 20)
#define EXT_CLKIN_ENABLE (1 << 19)
#define PCI_66MHZ (1 << 18) /* else 33 MHz */
#define PCI_CLKOUT_ENABLE (1 << 17)
#define LPC_CLKOUT_ENABLE (1 << 16)
#define USB1_WAKEUP_ON (1 << 15)
#define USB0_WAKEUP_ON (1 << 14)
/* TODO: define PCI idle detect bits */
#define TVC_PADS_ENABLE (1 << 9)
#define SSP_PADS_ENABLE (1 << 8)
#define LCD_PADS_ENABLE (1 << 7)
#define LPC_PADS_ENABLE (1 << 6)
#define PCI_PADS_ENABLE (1 << 5)
#define IDE_PADS_ENABLE (1 << 4)
#define DRAM_PADS_POWER_DOWN (1 << 3)
#define NAND_PADS_DISABLE (1 << 2)
#define PFLASH_PADS_DISABLE (1 << 1)
#define SFLASH_PADS_DISABLE (1 << 0)
/* Global Clock Control Register */
#define GLOBAL_CLOCK_CTRL 0x34
#define POWER_STATE_G0 (1 << 31)
#define POWER_STATE_S1 (1 << 30) /* else it is S3/S4 state */
#define SECURITY_APB_AHB (1 << 29)
/* else Security APB clk will be 0.75xAHB */
/* TODO: TVC clock divider */
#define PCI_CLKRUN_ENABLE (1 << 16)
#define BOOT_CLK_DISABLE (1 << 13)
#define TVC_CLK_DISABLE (1 << 12)
#define FLASH_CLK_DISABLE (1 << 11)
#define DDR_CLK_DISABLE (1 << 10)
#define PCI_CLK_DISABLE (1 << 9)
#define IDE_CLK_DISABLE (1 << 8)
#define USB1_CLK_DISABLE (1 << 7)
#define USB0_CLK_DISABLE (1 << 6)
#define SATA1_CLK_DISABLE (1 << 5)
#define SATA0_CLK_DISABLE (1 << 4)
#define GMAC1_CLK_DISABLE (1 << 3)
#define GMAC0_CLK_DISABLE (1 << 2)
#define SECURITY_CLK_DISABLE (1 << 1)
/* TODO: other registers definitions if needed */
#endif /* __MACH_GLOBAL_REG_H */
/*
* Gemini gpiolib specific defines
*
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __MACH_GPIO_H__
#define __MACH_GPIO_H__
#include <mach/irqs.h>
#include <asm-generic/gpio.h>
#define gpio_get_value __gpio_get_value
#define gpio_set_value __gpio_set_value
#define gpio_cansleep __gpio_cansleep
#define gpio_to_irq(x) ((x) + GPIO_IRQ_BASE)
#define irq_to_gpio(x) ((x) - GPIO_IRQ_BASE)
#endif /* __MACH_GPIO_H__ */
/*
* This file contains the hardware definitions for Gemini.
*
* Copyright (C) 2001-2006 Storlink, Corp.
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __MACH_HARDWARE_H
#define __MACH_HARDWARE_H
/*
* Memory Map definitions
*/
/* FIXME: Does it really swap SRAM like this? */
#ifdef CONFIG_GEMINI_MEM_SWAP
# define GEMINI_DRAM_BASE 0x00000000
# define GEMINI_SRAM_BASE 0x20000000
#else
# define GEMINI_SRAM_BASE 0x00000000
# define GEMINI_DRAM_BASE 0x10000000
#endif
#define GEMINI_FLASH_BASE 0x30000000
#define GEMINI_GLOBAL_BASE 0x40000000
#define GEMINI_WAQTCHDOG_BASE 0x41000000
#define GEMINI_UART_BASE 0x42000000
#define GEMINI_TIMER_BASE 0x43000000
#define GEMINI_LCD_BASE 0x44000000
#define GEMINI_RTC_BASE 0x45000000
#define GEMINI_SATA_BASE 0x46000000
#define GEMINI_LPC_HOST_BASE 0x47000000
#define GEMINI_LPC_IO_BASE 0x47800000
#define GEMINI_INTERRUPT_BASE 0x48000000
/* TODO: Different interrupt controlers when SMP
* #define GEMINI_INTERRUPT0_BASE 0x48000000
* #define GEMINI_INTERRUPT1_BASE 0x49000000
*/
#define GEMINI_SSP_CTRL_BASE 0x4A000000
#define GEMINI_POWER_CTRL_BASE 0x4B000000
#define GEMINI_CIR_BASE 0x4C000000
#define GEMINI_GPIO_BASE(x) (0x4D000000 + (x) * 0x1000000)
#define GEMINI_PCI_IO_BASE 0x50000000
#define GEMINI_PCI_MEM_BASE 0x58000000
#define GEMINI_TOE_BASE 0x60000000
#define GEMINI_GMAC0_BASE 0x6000A000
#define GEMINI_GMAC1_BASE 0x6000E000
#define GEMINI_SECURITY_BASE 0x62000000
#define GEMINI_IDE0_BASE 0x63000000
#define GEMINI_IDE1_BASE 0x63400000
#define GEMINI_RAID_BASE 0x64000000
#define GEMINI_FLASH_CTRL_BASE 0x65000000
#define GEMINI_DRAM_CTRL_BASE 0x66000000
#define GEMINI_GENERAL_DMA_BASE 0x67000000
#define GEMINI_USB0_BASE 0x68000000
#define GEMINI_USB1_BASE 0x69000000
#define GEMINI_BIG_ENDIAN_BASE 0x80000000
#define GEMINI_TIMER1_BASE GEMINI_TIMER_BASE
#define GEMINI_TIMER2_BASE (GEMINI_TIMER_BASE + 0x10)
#define GEMINI_TIMER3_BASE (GEMINI_TIMER_BASE + 0x20)
/*
* UART Clock when System clk is 150MHz
*/
#define UART_CLK 48000000
/*
* macro to get at IO space when running virtually
*/
#define IO_ADDRESS(x) ((((x) & 0xFFF00000) >> 4) | ((x) & 0x000FFFFF) | 0xF0000000)
#endif
/*
* Copyright (C) 2001-2006 Storlink, Corp.
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __MACH_IO_H
#define __MACH_IO_H
#define IO_SPACE_LIMIT 0xffffffff
#define __io(a) __typesafe_io(a)
#define __mem_pci(a) (a)
#endif /* __MACH_IO_H */
/*
* Copyright (C) 2001-2006 Storlink, Corp.
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __MACH_IRQS_H__
#define __MACH_IRQS_H__
#define IRQ_SERIRQ1 31
#define IRQ_SERIRQ0 30
#define IRQ_PCID 29
#define IRQ_PCIC 28
#define IRQ_PCIB 27
#define IRQ_PWR 26
#define IRQ_CIR 25
#define IRQ_GPIO(x) (22 + (x))
#define IRQ_SSP 21
#define IRQ_LPC 20
#define IRQ_LCD 19
#define IRQ_UART 18
#define IRQ_RTC 17
#define IRQ_TIMER3 16
#define IRQ_TIMER2 15
#define IRQ_TIMER1 14
#define IRQ_FLASH 12
#define IRQ_USB1 11
#define IRQ_USB0 10
#define IRQ_DMA 9
#define IRQ_PCI 8
#define IRQ_IPSEC 7
#define IRQ_RAID 6
#define IRQ_IDE1 5
#define IRQ_IDE0 4
#define IRQ_WATCHDOG 3
#define IRQ_GMAC1 2
#define IRQ_GMAC0 1
#define IRQ_IPI 0
#define NORMAL_IRQ_NUM 32
#define GPIO_IRQ_BASE NORMAL_IRQ_NUM
#define GPIO_IRQ_NUM (3 * 32)
#define ARCH_TIMER_IRQ IRQ_TIMER2
#define NR_IRQS (NORMAL_IRQ_NUM + GPIO_IRQ_NUM)
#endif /* __MACH_IRQS_H__ */
/*
* Copyright (C) 2001-2006 Storlink, Corp.
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __MACH_MEMORY_H
#define __MACH_MEMORY_H
#ifdef CONFIG_GEMINI_MEM_SWAP
# define PHYS_OFFSET UL(0x00000000)
#else
# define PHYS_OFFSET UL(0x10000000)
#endif
#endif /* __MACH_MEMORY_H */
/*
* Copyright (C) 2001-2006 Storlink, Corp.
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __MACH_SYSTEM_H
#define __MACH_SYSTEM_H
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/global_reg.h>
static inline void arch_idle(void)
{
/*
* Because of broken hardware we have to enable interrupts or the CPU
* will never wakeup... Acctualy it is not very good to enable
* interrupts here since scheduler can miss a tick, but there is
* no other way around this. Platforms that needs it for power saving
* should call enable_hlt() in init code, since by default it is
* disabled.
*/
local_irq_enable();
cpu_do_idle();
}
static inline void arch_reset(char mode)
{
__raw_writel(RESET_GLOBAL | RESET_CPU1,
IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_RESET);
}
#endif /* __MACH_SYSTEM_H */
/*
* Gemini timex specifications
*
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
/* When AHB bus frequency is 150MHz */
#define CLOCK_TICK_RATE 38000000
/*
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* Based on mach-pxa/include/mach/uncompress.h:
* Copyright: (C) 2001 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __MACH_UNCOMPRESS_H
#define __MACH_UNCOMPRESS_H
#include <linux/serial_reg.h>
#include <mach/hardware.h>
static volatile unsigned long *UART = (unsigned long *)GEMINI_UART_BASE;
/*
* The following code assumes the serial port has already been
* initialized by the bootloader. If you didn't setup a port in
* your bootloader then nothing will appear (which might be desired).
*/
static inline void putc(char c)
{
while (!(UART[UART_LSR] & UART_LSR_THRE))
barrier();
UART[UART_TX] = c;
}
#define flush() do { } while (0)
/*
* nothing to do
*/
#define arch_decomp_setup()
#define arch_decomp_wdog()
#endif /* __MACH_UNCOMPRESS_H */
/*
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#define VMALLOC_END 0xF0000000
/*
* Interrupt routines for Gemini
*
* Copyright (C) 2001-2006 Storlink, Corp.
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/init.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/stddef.h>
#include <linux/list.h>
#include <linux/sched.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#define IRQ_SOURCE(base_addr) (base_addr + 0x00)
#define IRQ_MASK(base_addr) (base_addr + 0x04)
#define IRQ_CLEAR(base_addr) (base_addr + 0x08)
#define IRQ_TMODE(base_addr) (base_addr + 0x0C)
#define IRQ_TLEVEL(base_addr) (base_addr + 0x10)
#define IRQ_STATUS(base_addr) (base_addr + 0x14)
#define FIQ_SOURCE(base_addr) (base_addr + 0x20)
#define FIQ_MASK(base_addr) (base_addr + 0x24)
#define FIQ_CLEAR(base_addr) (base_addr + 0x28)
#define FIQ_TMODE(base_addr) (base_addr + 0x2C)
#define FIQ_LEVEL(base_addr) (base_addr + 0x30)
#define FIQ_STATUS(base_addr) (base_addr + 0x34)
static void gemini_ack_irq(unsigned int irq)
{
__raw_writel(1 << irq, IRQ_CLEAR(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
}
static void gemini_mask_irq(unsigned int irq)
{
unsigned int mask;
mask = __raw_readl(IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
mask &= ~(1 << irq);
__raw_writel(mask, IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
}
static void gemini_unmask_irq(unsigned int irq)
{
unsigned int mask;
mask = __raw_readl(IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
mask |= (1 << irq);
__raw_writel(mask, IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
}
static struct irq_chip gemini_irq_chip = {
.name = "INTC",
.ack = gemini_ack_irq,
.mask = gemini_mask_irq,
.unmask = gemini_unmask_irq,
};
static struct resource irq_resource = {
.name = "irq_handler",
.start = IO_ADDRESS(GEMINI_INTERRUPT_BASE),
.end = IO_ADDRESS(FIQ_STATUS(GEMINI_INTERRUPT_BASE)) + 4,
};
void __init gemini_init_irq(void)
{
unsigned int i, mode = 0, level = 0;
/*
* Disable arch_idle() by default since it is buggy
* For more info see arch/arm/mach-gemini/include/mach/system.h
*/
disable_hlt();
request_resource(&iomem_resource, &irq_resource);
for (i = 0; i < NR_IRQS; i++) {
set_irq_chip(i, &gemini_irq_chip);
if((i >= IRQ_TIMER1 && i <= IRQ_TIMER3) || (i >= IRQ_SERIRQ0 && i <= IRQ_SERIRQ1)) {
set_irq_handler(i, handle_edge_irq);
mode |= 1 << i;
level |= 1 << i;
} else {
set_irq_handler(i, handle_level_irq);
}
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
/* Disable all interrupts */
__raw_writel(0, IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
__raw_writel(0, FIQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
/* Set interrupt mode */
__raw_writel(mode, IRQ_TMODE(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
__raw_writel(level, IRQ_TLEVEL(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
}
/*
* Static mappings for Gemini
*
* Copyright (C) 2001-2006 Storlink, Corp.
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/mm.h>
#include <linux/init.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
/* Page table mapping for I/O region */
static struct map_desc gemini_io_desc[] __initdata = {
{
.virtual = IO_ADDRESS(GEMINI_GLOBAL_BASE),
.pfn =__phys_to_pfn(GEMINI_GLOBAL_BASE),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(GEMINI_UART_BASE),
.pfn = __phys_to_pfn(GEMINI_UART_BASE),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(GEMINI_TIMER_BASE),
.pfn = __phys_to_pfn(GEMINI_TIMER_BASE),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(GEMINI_INTERRUPT_BASE),
.pfn = __phys_to_pfn(GEMINI_INTERRUPT_BASE),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(GEMINI_POWER_CTRL_BASE),
.pfn = __phys_to_pfn(GEMINI_POWER_CTRL_BASE),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(GEMINI_GPIO_BASE(0)),
.pfn = __phys_to_pfn(GEMINI_GPIO_BASE(0)),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(GEMINI_GPIO_BASE(1)),
.pfn = __phys_to_pfn(GEMINI_GPIO_BASE(1)),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(GEMINI_GPIO_BASE(2)),
.pfn = __phys_to_pfn(GEMINI_GPIO_BASE(2)),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(GEMINI_FLASH_CTRL_BASE),
.pfn = __phys_to_pfn(GEMINI_FLASH_CTRL_BASE),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(GEMINI_DRAM_CTRL_BASE),
.pfn = __phys_to_pfn(GEMINI_DRAM_CTRL_BASE),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(GEMINI_GENERAL_DMA_BASE),
.pfn = __phys_to_pfn(GEMINI_GENERAL_DMA_BASE),
.length = SZ_512K,
.type = MT_DEVICE,
},
};
void __init gemini_map_io(void)
{
iotable_init(gemini_io_desc, ARRAY_SIZE(gemini_io_desc));
}
/*
* Copyright (C) 2001-2006 Storlink, Corp.
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/global_reg.h>
#include <asm/mach/time.h>
/*
* Register definitions for the timers
*/
#define TIMER_COUNT(BASE_ADDR) (BASE_ADDR + 0x00)
#define TIMER_LOAD(BASE_ADDR) (BASE_ADDR + 0x04)
#define TIMER_MATCH1(BASE_ADDR) (BASE_ADDR + 0x08)
#define TIMER_MATCH2(BASE_ADDR) (BASE_ADDR + 0x0C)
#define TIMER_CR(BASE_ADDR) (BASE_ADDR + 0x30)
#define TIMER_1_CR_ENABLE (1 << 0)
#define TIMER_1_CR_CLOCK (1 << 1)
#define TIMER_1_CR_INT (1 << 2)
#define TIMER_2_CR_ENABLE (1 << 3)
#define TIMER_2_CR_CLOCK (1 << 4)
#define TIMER_2_CR_INT (1 << 5)
#define TIMER_3_CR_ENABLE (1 << 6)
#define TIMER_3_CR_CLOCK (1 << 7)
#define TIMER_3_CR_INT (1 << 8)
/*
* IRQ handler for the timer
*/
static irqreturn_t gemini_timer_interrupt(int irq, void *dev_id)
{
timer_tick();
return IRQ_HANDLED;
}
static struct irqaction gemini_timer_irq = {
.name = "Gemini Timer Tick",
.flags = IRQF_DISABLED | IRQF_TIMER,
.handler = gemini_timer_interrupt,
};
/*
* Set up timer interrupt, and return the current time in seconds.
*/
void __init gemini_timer_init(void)
{
unsigned int tick_rate, reg_v;
reg_v = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE + GLOBAL_STATUS));
tick_rate = REG_TO_AHB_SPEED(reg_v) * 1000000;
printk(KERN_INFO "Bus: %dMHz", tick_rate / 1000000);
tick_rate /= 6; /* APB bus run AHB*(1/6) */
switch(reg_v & CPU_AHB_RATIO_MASK) {
case CPU_AHB_1_1:
printk(KERN_CONT "(1/1)\n");
break;
case CPU_AHB_3_2:
printk(KERN_CONT "(3/2)\n");
break;
case CPU_AHB_24_13:
printk(KERN_CONT "(24/13)\n");
break;
case CPU_AHB_2_1:
printk(KERN_CONT "(2/1)\n");
break;
}
/*
* Make irqs happen for the system timer
*/
setup_irq(IRQ_TIMER2, &gemini_timer_irq);
/* Start the timer */
__raw_writel(tick_rate / HZ, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE)));
__raw_writel(tick_rate / HZ, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE)));
__raw_writel(TIMER_2_CR_ENABLE | TIMER_2_CR_INT, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
}
......@@ -186,6 +186,24 @@ config CPU_ARM926T
Say Y if you want support for the ARM926T processor.
Otherwise, say N.
# FA526
config CPU_FA526
bool
select CPU_32v4
select CPU_ABRT_EV4
select CPU_PABRT_NOIFAR
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_CACHE_FA
select CPU_COPY_FA if MMU
select CPU_TLB_FA if MMU
help
The FA526 is a version of the ARMv4 compatible processor with
Branch Target Buffer, Unified TLB and cache line size 16.
Say Y if you want support for the FA526 processor.
Otherwise, say N.
# ARM940T
config CPU_ARM940T
bool "Support ARM940T processor" if ARCH_INTEGRATOR
......@@ -495,6 +513,9 @@ config CPU_CACHE_VIVT
config CPU_CACHE_VIPT
bool
config CPU_CACHE_FA
bool
if MMU
# The copy-page model
config CPU_COPY_V3
......@@ -509,6 +530,9 @@ config CPU_COPY_V4WB
config CPU_COPY_FEROCEON
bool
config CPU_COPY_FA
bool
config CPU_COPY_V6
bool
......@@ -539,6 +563,13 @@ config CPU_TLB_FEROCEON
help
Feroceon TLB (v4wbi with non-outer-cachable page table walks).
config CPU_TLB_FA
bool
help
Faraday ARM FA526 architecture, unified TLB with writeback cache
and invalidate instruction cache entry. Branch target buffer is
also supported.
config CPU_TLB_V6
bool
......@@ -649,7 +680,7 @@ config CPU_DCACHE_SIZE
config CPU_DCACHE_WRITETHROUGH
bool "Force write through D-cache"
depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020) && !CPU_DCACHE_DISABLE
depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_FA526) && !CPU_DCACHE_DISABLE
default y if CPU_ARM925T
help
Say Y here to use the data cache in writethrough mode. Unless you
......@@ -664,7 +695,7 @@ config CPU_CACHE_ROUND_ROBIN
config CPU_BPREDICT_DISABLE
bool "Disable branch prediction"
depends on CPU_ARM1020 || CPU_V6 || CPU_MOHAWK || CPU_XSC3 || CPU_V7
depends on CPU_ARM1020 || CPU_V6 || CPU_MOHAWK || CPU_XSC3 || CPU_V7 || CPU_FA526
help
Say Y here to disable branch prediction. If unsure, say N.
......
......@@ -33,6 +33,7 @@ obj-$(CONFIG_CPU_CACHE_V4WT) += cache-v4wt.o
obj-$(CONFIG_CPU_CACHE_V4WB) += cache-v4wb.o
obj-$(CONFIG_CPU_CACHE_V6) += cache-v6.o
obj-$(CONFIG_CPU_CACHE_V7) += cache-v7.o
obj-$(CONFIG_CPU_CACHE_FA) += cache-fa.o
obj-$(CONFIG_CPU_COPY_V3) += copypage-v3.o
obj-$(CONFIG_CPU_COPY_V4WT) += copypage-v4wt.o
......@@ -42,6 +43,7 @@ obj-$(CONFIG_CPU_COPY_V6) += copypage-v6.o context.o
obj-$(CONFIG_CPU_SA1100) += copypage-v4mc.o
obj-$(CONFIG_CPU_XSCALE) += copypage-xscale.o
obj-$(CONFIG_CPU_XSC3) += copypage-xsc3.o
obj-$(CONFIG_CPU_COPY_FA) += copypage-fa.o
obj-$(CONFIG_CPU_TLB_V3) += tlb-v3.o
obj-$(CONFIG_CPU_TLB_V4WT) += tlb-v4.o
......@@ -50,6 +52,7 @@ obj-$(CONFIG_CPU_TLB_V4WBI) += tlb-v4wbi.o
obj-$(CONFIG_CPU_TLB_FEROCEON) += tlb-v4wbi.o # reuse v4wbi TLB functions
obj-$(CONFIG_CPU_TLB_V6) += tlb-v6.o
obj-$(CONFIG_CPU_TLB_V7) += tlb-v7.o
obj-$(CONFIG_CPU_TLB_FA) += tlb-fa.o
obj-$(CONFIG_CPU_ARM610) += proc-arm6_7.o
obj-$(CONFIG_CPU_ARM710) += proc-arm6_7.o
......@@ -63,6 +66,7 @@ obj-$(CONFIG_CPU_ARM925T) += proc-arm925.o
obj-$(CONFIG_CPU_ARM926T) += proc-arm926.o
obj-$(CONFIG_CPU_ARM940T) += proc-arm940.o
obj-$(CONFIG_CPU_ARM946E) += proc-arm946.o
obj-$(CONFIG_CPU_FA526) += proc-fa526.o
obj-$(CONFIG_CPU_ARM1020) += proc-arm1020.o
obj-$(CONFIG_CPU_ARM1020E) += proc-arm1020e.o
obj-$(CONFIG_CPU_ARM1022) += proc-arm1022.o
......
/*
* linux/arch/arm/mm/cache-fa.S
*
* Copyright (C) 2005 Faraday Corp.
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* Based on cache-v4wb.S:
* Copyright (C) 1997-2002 Russell king
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Processors: FA520 FA526 FA626
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/memory.h>
#include <asm/page.h>
#include "proc-macros.S"
/*
* The size of one data cache line.
*/
#define CACHE_DLINESIZE 16
/*
* The total size of the data cache.
*/
#ifdef CONFIG_ARCH_GEMINI
#define CACHE_DSIZE 8192
#else
#define CACHE_DSIZE 16384
#endif
/* FIXME: put optimal value here. Current one is just estimation */
#define CACHE_DLIMIT (CACHE_DSIZE * 2)
/*
* flush_user_cache_all()
*
* Clean and invalidate all cache entries in a particular address
* space.
*/
ENTRY(fa_flush_user_cache_all)
/* FALLTHROUGH */
/*
* flush_kern_cache_all()
*
* Clean and invalidate the entire cache.
*/
ENTRY(fa_flush_kern_cache_all)
mov ip, #0
mov r2, #VM_EXEC
__flush_whole_cache:
mcr p15, 0, ip, c7, c14, 0 @ clean/invalidate D cache
tst r2, #VM_EXEC
mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcrne p15, 0, ip, c7, c5, 6 @ invalidate BTB
mcrne p15, 0, ip, c7, c10, 4 @ drain write buffer
mcrne p15, 0, ip, c7, c5, 4 @ prefetch flush
mov pc, lr
/*
* flush_user_cache_range(start, end, flags)
*
* Invalidate a range of cache entries in the specified
* address space.
*
* - start - start address (inclusive, page aligned)
* - end - end address (exclusive, page aligned)
* - flags - vma_area_struct flags describing address space
*/
ENTRY(fa_flush_user_cache_range)
mov ip, #0
sub r3, r1, r0 @ calculate total size
cmp r3, #CACHE_DLIMIT @ total size >= limit?
bhs __flush_whole_cache @ flush whole D cache
1: tst r2, #VM_EXEC
mcrne p15, 0, r0, c7, c5, 1 @ invalidate I line
mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
tst r2, #VM_EXEC
mcrne p15, 0, ip, c7, c5, 6 @ invalidate BTB
mcrne p15, 0, ip, c7, c10, 4 @ data write barrier
mcrne p15, 0, ip, c7, c5, 4 @ prefetch flush
mov pc, lr
/*
* coherent_kern_range(start, end)
*
* Ensure coherency between the Icache and the Dcache in the
* region described by start. If you have non-snooping
* Harvard caches, you need to implement this function.
*
* - start - virtual start address
* - end - virtual end address
*/
ENTRY(fa_coherent_kern_range)
/* fall through */
/*
* coherent_user_range(start, end)
*
* Ensure coherency between the Icache and the Dcache in the
* region described by start. If you have non-snooping
* Harvard caches, you need to implement this function.
*
* - start - virtual start address
* - end - virtual end address
*/
ENTRY(fa_coherent_user_range)
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
mov r0, #0
mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
mcr p15, 0, r0, c7, c5, 4 @ prefetch flush
mov pc, lr
/*
* flush_kern_dcache_page(kaddr)
*
* Ensure that the data held in the page kaddr is written back
* to the page in question.
*
* - kaddr - kernel address (guaranteed to be page aligned)
*/
ENTRY(fa_flush_kern_dcache_page)
add r1, r0, #PAGE_SZ
1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
mov r0, #0
mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
mov pc, lr
/*
* dma_inv_range(start, end)
*
* Invalidate (discard) the specified virtual address range.
* May not write back any entries. If 'start' or 'end'
* are not cache line aligned, those lines must be written
* back.
*
* - start - virtual start address
* - end - virtual end address
*/
ENTRY(fa_dma_inv_range)
tst r0, #CACHE_DLINESIZE - 1
bic r0, r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D entry
tst r1, #CACHE_DLINESIZE - 1
bic r1, r1, #CACHE_DLINESIZE - 1
mcrne p15, 0, r1, c7, c14, 1 @ clean & invalidate D entry
1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
mov pc, lr
/*
* dma_clean_range(start, end)
*
* Clean (write back) the specified virtual address range.
*
* - start - virtual start address
* - end - virtual end address
*/
ENTRY(fa_dma_clean_range)
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
mov pc, lr
/*
* dma_flush_range(start,end)
* - start - virtual start address of region
* - end - virtual end address of region
*/
ENTRY(fa_dma_flush_range)
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
mov pc, lr
__INITDATA
.type fa_cache_fns, #object
ENTRY(fa_cache_fns)
.long fa_flush_kern_cache_all
.long fa_flush_user_cache_all
.long fa_flush_user_cache_range
.long fa_coherent_kern_range
.long fa_coherent_user_range
.long fa_flush_kern_dcache_page
.long fa_dma_inv_range
.long fa_dma_clean_range
.long fa_dma_flush_range
.size fa_cache_fns, . - fa_cache_fns
/*
* linux/arch/arm/lib/copypage-fa.S
*
* Copyright (C) 2005 Faraday Corp.
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* Based on copypage-v4wb.S:
* Copyright (C) 1995-1999 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/highmem.h>
/*
* Faraday optimised copy_user_page
*/
static void __naked
fa_copy_user_page(void *kto, const void *kfrom)
{
asm("\
stmfd sp!, {r4, lr} @ 2\n\
mov r2, %0 @ 1\n\
1: ldmia r1!, {r3, r4, ip, lr} @ 4\n\
stmia r0, {r3, r4, ip, lr} @ 4\n\
mcr p15, 0, r0, c7, c14, 1 @ 1 clean and invalidate D line\n\
add r0, r0, #16 @ 1\n\
ldmia r1!, {r3, r4, ip, lr} @ 4\n\
stmia r0, {r3, r4, ip, lr} @ 4\n\
mcr p15, 0, r0, c7, c14, 1 @ 1 clean and invalidate D line\n\
add r0, r0, #16 @ 1\n\
subs r2, r2, #1 @ 1\n\
bne 1b @ 1\n\
mcr p15, 0, r2, c7, c10, 4 @ 1 drain WB\n\
ldmfd sp!, {r4, pc} @ 3"
:
: "I" (PAGE_SIZE / 32));
}
void fa_copy_user_highpage(struct page *to, struct page *from,
unsigned long vaddr)
{
void *kto, *kfrom;
kto = kmap_atomic(to, KM_USER0);
kfrom = kmap_atomic(from, KM_USER1);
fa_copy_user_page(kto, kfrom);
kunmap_atomic(kfrom, KM_USER1);
kunmap_atomic(kto, KM_USER0);
}
/*
* Faraday optimised clear_user_page
*
* Same story as above.
*/
void fa_clear_user_highpage(struct page *page, unsigned long vaddr)
{
void *ptr, *kaddr = kmap_atomic(page, KM_USER0);
asm volatile("\
mov r1, %2 @ 1\n\
mov r2, #0 @ 1\n\
mov r3, #0 @ 1\n\
mov ip, #0 @ 1\n\
mov lr, #0 @ 1\n\
1: stmia %0, {r2, r3, ip, lr} @ 4\n\
mcr p15, 0, %0, c7, c14, 1 @ 1 clean and invalidate D line\n\
add %0, %0, #16 @ 1\n\
stmia %0, {r2, r3, ip, lr} @ 4\n\
mcr p15, 0, %0, c7, c14, 1 @ 1 clean and invalidate D line\n\
add %0, %0, #16 @ 1\n\
subs r1, r1, #1 @ 1\n\
bne 1b @ 1\n\
mcr p15, 0, r1, c7, c10, 4 @ 1 drain WB"
: "=r" (ptr)
: "0" (kaddr), "I" (PAGE_SIZE / 32)
: "r1", "r2", "r3", "ip", "lr");
kunmap_atomic(kaddr, KM_USER0);
}
struct cpu_user_fns fa_user_fns __initdata = {
.cpu_clear_user_highpage = fa_clear_user_highpage,
.cpu_copy_user_highpage = fa_copy_user_highpage,
};
/*
* linux/arch/arm/mm/proc-fa526.S: MMU functions for FA526
*
* Written by : Luke Lee
* Copyright (C) 2005 Faraday Corp.
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* These are the low level assembler for performing cache and TLB
* functions on the fa526.
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include <asm/system.h>
#include "proc-macros.S"
#define CACHE_DLINESIZE 16
.text
/*
* cpu_fa526_proc_init()
*/
ENTRY(cpu_fa526_proc_init)
mov pc, lr
/*
* cpu_fa526_proc_fin()
*/
ENTRY(cpu_fa526_proc_fin)
stmfd sp!, {lr}
mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
msr cpsr_c, ip
bl fa_flush_kern_cache_all
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1000 @ ...i............
bic r0, r0, #0x000e @ ............wca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
nop
nop
ldmfd sp!, {pc}
/*
* cpu_fa526_reset(loc)
*
* Perform a soft reset of the system. Put the CPU into the
* same state as it would be if it had been reset, and branch
* to what would be the reset vector.
*
* loc: location to jump to for soft reset
*/
.align 4
ENTRY(cpu_fa526_reset)
/* TODO: Use CP8 if possible... */
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
#endif
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x1100 @ ...i...s........
bic ip, ip, #0x0800 @ BTB off
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
nop
nop
mov pc, r0
/*
* cpu_fa526_do_idle()
*/
.align 4
ENTRY(cpu_fa526_do_idle)
mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
mov pc, lr
ENTRY(cpu_fa526_dcache_clean_area)
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
subs r1, r1, #CACHE_DLINESIZE
bhi 1b
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
/* =============================== PageTable ============================== */
/*
* cpu_fa526_switch_mm(pgd)
*
* Set the translation base pointer to be as described by pgd.
*
* pgd: new page tables
*/
.align 4
ENTRY(cpu_fa526_switch_mm)
#ifdef CONFIG_MMU
mov ip, #0
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
#else
mcr p15, 0, ip, c7, c14, 0 @ clean and invalidate whole D cache
#endif
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcr p15, 0, ip, c7, c5, 6 @ invalidate BTB since mm changed
mcr p15, 0, ip, c7, c10, 4 @ data write barrier
mcr p15, 0, ip, c7, c5, 4 @ prefetch flush
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate UTLB
#endif
mov pc, lr
/*
* cpu_fa526_set_pte_ext(ptep, pte, ext)
*
* Set a PTE and flush it out
*/
.align 4
ENTRY(cpu_fa526_set_pte_ext)
#ifdef CONFIG_MMU
armv3_set_pte_ext
mov r0, r0
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain WB
#endif
mov pc, lr
__INIT
.type __fa526_setup, #function
__fa526_setup:
/* On return of this routine, r0 must carry correct flags for CFG register */
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
#endif
mcr p15, 0, r0, c7, c5, 5 @ invalidate IScratchpad RAM
mov r0, #1
mcr p15, 0, r0, c1, c1, 0 @ turn-on ECR
mov r0, #0
mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB All
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c5, 4 @ prefetch flush
mov r0, #0x1f @ Domains 0, 1 = manager, 2 = client
mcr p15, 0, r0, c3, c0 @ load domain access register
mrc p15, 0, r0, c1, c0 @ get control register v4
ldr r5, fa526_cr1_clear
bic r0, r0, r5
ldr r5, fa526_cr1_set
orr r0, r0, r5
mov pc, lr
.size __fa526_setup, . - __fa526_setup
/*
* .RVI ZFRS BLDP WCAM
* ..11 1001 .111 1101
*
*/
.type fa526_cr1_clear, #object
.type fa526_cr1_set, #object
fa526_cr1_clear:
.word 0x3f3f
fa526_cr1_set:
.word 0x397D
__INITDATA
/*
* Purpose : Function pointers used to access above functions - all calls
* come through these
*/
.type fa526_processor_functions, #object
fa526_processor_functions:
.word v4_early_abort
.word pabort_noifar
.word cpu_fa526_proc_init
.word cpu_fa526_proc_fin
.word cpu_fa526_reset
.word cpu_fa526_do_idle
.word cpu_fa526_dcache_clean_area
.word cpu_fa526_switch_mm
.word cpu_fa526_set_pte_ext
.size fa526_processor_functions, . - fa526_processor_functions
.section ".rodata"
.type cpu_arch_name, #object
cpu_arch_name:
.asciz "armv4"
.size cpu_arch_name, . - cpu_arch_name
.type cpu_elf_name, #object
cpu_elf_name:
.asciz "v4"
.size cpu_elf_name, . - cpu_elf_name
.type cpu_fa526_name, #object
cpu_fa526_name:
.asciz "FA526"
.size cpu_fa526_name, . - cpu_fa526_name
.align
.section ".proc.info.init", #alloc, #execinstr
.type __fa526_proc_info,#object
__fa526_proc_info:
.long 0x66015261
.long 0xff01fff1
.long PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
.long PMD_TYPE_SECT | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
b __fa526_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_HALF
.long cpu_fa526_name
.long fa526_processor_functions
.long fa_tlb_fns
.long fa_user_fns
.long fa_cache_fns
.size __fa526_proc_info, . - __fa526_proc_info
/*
* linux/arch/arm/mm/tlb-fa.S
*
* Copyright (C) 2005 Faraday Corp.
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* Based on tlb-v4wbi.S:
* Copyright (C) 1997-2002 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* ARM architecture version 4, Faraday variation.
* This assume an unified TLBs, with a write buffer, and branch target buffer (BTB)
*
* Processors: FA520 FA526 FA626
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/asm-offsets.h>
#include <asm/tlbflush.h>
#include "proc-macros.S"
/*
* flush_user_tlb_range(start, end, mm)
*
* Invalidate a range of TLB entries in the specified address space.
*
* - start - range start address
* - end - range end address
* - mm - mm_struct describing address space
*/
.align 4
ENTRY(fa_flush_user_tlb_range)
vma_vm_mm ip, r2
act_mm r3 @ get current->active_mm
eors r3, ip, r3 @ == mm ?
movne pc, lr @ no, we dont do anything
mov r3, #0
mcr p15, 0, r3, c7, c10, 4 @ drain WB
bic r0, r0, #0x0ff
bic r0, r0, #0xf00
1: mcr p15, 0, r0, c8, c7, 1 @ invalidate UTLB entry
add r0, r0, #PAGE_SZ
cmp r0, r1
blo 1b
mcr p15, 0, r3, c7, c5, 6 @ invalidate BTB
mcr p15, 0, r3, c7, c10, 4 @ data write barrier
mov pc, lr
ENTRY(fa_flush_kern_tlb_range)
mov r3, #0
mcr p15, 0, r3, c7, c10, 4 @ drain WB
bic r0, r0, #0x0ff
bic r0, r0, #0xf00
1: mcr p15, 0, r0, c8, c7, 1 @ invalidate UTLB entry
add r0, r0, #PAGE_SZ
cmp r0, r1
blo 1b
mcr p15, 0, r3, c7, c5, 6 @ invalidate BTB
mcr p15, 0, r3, c7, c10, 4 @ data write barrier
mcr p15, 0, r3, c7, c5, 4 @ prefetch flush
mov pc, lr
__INITDATA
.type fa_tlb_fns, #object
ENTRY(fa_tlb_fns)
.long fa_flush_user_tlb_range
.long fa_flush_kern_tlb_range
.long fa_tlb_flags
.size fa_tlb_fns, . - fa_tlb_fns
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册