提交 51b563fc 编写于 作者: S Sam Ravnborg

arm, cris, mips, sparc, powerpc, um, xtensa: fix build with bash 4.0

Albin Tonnerre <albin.tonnerre@free-electrons.com> reported:

    Bash 4 filters out variables which contain a dot in them.
    This happends to be the case of CPPFLAGS_vmlinux.lds.
    This is rather unfortunate, as it now causes
    build failures when using SHELL=/bin/bash to compile,
    or when bash happens to be used by make (eg when it's /bin/sh)

Remove the common definition of CPPFLAGS_vmlinux.lds by
pushing relevant stuff to either Makefile.build or the
arch specific kernel/Makefile where we build the linker script.

This is also nice cleanup as we move the information out where
it is used.

Notes for the different architectures touched:

arm - we use an already exported symbol
cris - we use a config symbol aleady available
       [Not build tested]
mips - the jiffies complexity has moved to vmlinux.lds.S where we need it.
       Added a few variables to CPPFLAGS - they are only used by
       the linker script.
       [Not build tested]
powerpc - removed assignment that is not needed
          [not build tested]
sparc - simplified it using $(BITS)
um - introduced a few new exported variables to deal with this
xtensa - added options to CPP invocation
         [not build tested]

Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
上级 4356f489
......@@ -1027,11 +1027,6 @@ prepare0: archprepare FORCE
# All the preparing..
prepare: prepare0
# Leave this as default for preprocessing vmlinux.lds.S, which is now
# done in arch/$(ARCH)/kernel/Makefile
export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH)
# The asm symlink changes when $(ARCH) changes.
# Detect this and ask user to run make mrproper
# If asm is a stale symlink (point to dir that does not exist) remove it
......
......@@ -14,7 +14,7 @@ LDFLAGS_vmlinux :=-p --no-undefined -X
ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
LDFLAGS_vmlinux += --be8
endif
CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
GZFLAGS :=-9
#KBUILD_CFLAGS +=-pipe
......
......@@ -2,7 +2,8 @@
# Makefile for the linux kernel.
#
AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
CPPFLAGS_vmlinux.lds := -DTEXT_OFFSET=$(TEXT_OFFSET)
AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
ifdef CONFIG_DYNAMIC_FTRACE
CFLAGS_REMOVE_ftrace.o = -pg
......
......@@ -42,8 +42,6 @@ LD = $(CROSS_COMPILE)ld -mcrislinux
OBJCOPYFLAGS := -O binary -R .note -R .comment -S
CPPFLAGS_vmlinux.lds = -DDRAM_VIRTUAL_BASE=0x$(CONFIG_ETRAX_DRAM_VIRTUAL_BASE)
KBUILD_AFLAGS += -mlinux -march=$(arch-y) $(inc)
KBUILD_CFLAGS += -mlinux -march=$(arch-y) -pipe $(inc)
KBUILD_CPPFLAGS += $(inc)
......
......@@ -3,6 +3,7 @@
# Makefile for the linux kernel.
#
CPPFLAGS_vmlinux.lds := -DDRAM_VIRTUAL_BASE=0x$(CONFIG_ETRAX_DRAM_VIRTUAL_BASE)
extra-y := vmlinux.lds
obj-y := process.o traps.o irq.o ptrace.o setup.o time.o sys_cris.o
......
......@@ -627,16 +627,6 @@ endif
cflags-y += -I$(srctree)/arch/mips/include/asm/mach-generic
drivers-$(CONFIG_PCI) += arch/mips/pci/
ifdef CONFIG_32BIT
ifdef CONFIG_CPU_LITTLE_ENDIAN
JIFFIES = jiffies_64
else
JIFFIES = jiffies_64 + 4
endif
else
JIFFIES = jiffies_64
endif
#
# Automatically detect the build format. By default we choose
# the elf format according to the load address.
......@@ -660,8 +650,9 @@ ifdef CONFIG_64BIT
endif
KBUILD_AFLAGS += $(cflags-y)
KBUILD_CFLAGS += $(cflags-y) \
-D"VMLINUX_LOAD_ADDRESS=$(load-y)"
KBUILD_CFLAGS += $(cflags-y)
KBUILD_CPPFLAGS += -D"VMLINUX_LOAD_ADDRESS=$(load-y)"
KBUILD_CPPFLAGS += -D"DATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)"
LDFLAGS += -m $(ld-emul)
......@@ -676,18 +667,6 @@ endif
OBJCOPYFLAGS += --remove-section=.reginfo
#
# Choosing incompatible machines durings configuration will result in
# error messages during linking. Select a default linkscript if
# none has been choosen above.
#
CPPFLAGS_vmlinux.lds := \
$(KBUILD_CFLAGS) \
-D"LOADADDR=$(load-y)" \
-D"JIFFIES=$(JIFFIES)" \
-D"DATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)"
head-y := arch/mips/kernel/head.o arch/mips/kernel/init_task.o
libs-y += arch/mips/lib/
......
......@@ -10,7 +10,16 @@ PHDRS {
text PT_LOAD FLAGS(7); /* RWX */
note PT_NOTE FLAGS(4); /* R__ */
}
jiffies = JIFFIES;
ifdef CONFIG_32BIT
ifdef CONFIG_CPU_LITTLE_ENDIAN
jiffies = jiffies_64;
else
jiffies = jiffies_64 + 4;
endif
else
jiffies = jiffies_64;
endif
SECTIONS
{
......@@ -29,7 +38,7 @@ SECTIONS
/* . = 0xa800000000300000; */
. = 0xffffffff80300000;
#endif
. = LOADADDR;
. = VMLINUX_LOAD_ADDRESS;
/* read-only */
_text = .; /* Text and read-only data */
.text : {
......
......@@ -158,8 +158,6 @@ drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/
# Default to zImage, override when needed
all: zImage
CPPFLAGS_vmlinux.lds := -Upowerpc
BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.% simpleImage.%
PHONY += $(BOOT_TARGETS)
......
......@@ -31,7 +31,6 @@ export BITS := 32
#KBUILD_CFLAGS += -g -pipe -fcall-used-g5 -fcall-used-g7
KBUILD_CFLAGS += -m32 -pipe -mno-fpu -fcall-used-g5 -fcall-used-g7
KBUILD_AFLAGS += -m32
CPPFLAGS_vmlinux.lds += -m32
#LDFLAGS_vmlinux = -N -Ttext 0xf0004000
# Since 2.5.40, the first stage is left not btfix-ed.
......@@ -45,9 +44,6 @@ else
CHECKFLAGS += -D__sparc__ -D__sparc_v9__ -D__arch64__ -m64
# Undefine sparc when processing vmlinux.lds - it is used
# And teach CPP we are doing 64 bit builds (for this case)
CPPFLAGS_vmlinux.lds += -m64 -Usparc
LDFLAGS := -m elf64_sparc
export BITS := 64
......
......@@ -7,7 +7,11 @@ ccflags-y := -Werror
extra-y := head_$(BITS).o
extra-y += init_task.o
extra-y += vmlinux.lds
# Undefine sparc when processing vmlinux.lds - it is used
# And teach CPP we are doing $(BITS) builds (for this case)
CPPFLAGS_vmlinux.lds := -Usparc -m$(BITS)
extra-y += vmlinux.lds
obj-$(CONFIG_SPARC32) += entry.o wof.o wuf.o
obj-$(CONFIG_SPARC32) += etrap_32.o
......
......@@ -96,11 +96,10 @@ CFLAGS_NO_HARDENING := $(call cc-option, -fno-PIC,) $(call cc-option, -fno-pic,)
$(call cc-option, -fno-stack-protector,) \
$(call cc-option, -fno-stack-protector-all,)
CONFIG_KERNEL_STACK_ORDER ?= 2
STACK_SIZE := $(shell echo $$[ 4096 * (1 << $(CONFIG_KERNEL_STACK_ORDER)) ] )
CPPFLAGS_vmlinux.lds = -U$(SUBARCH) -DSTART=$(START) -DELF_ARCH=$(ELF_ARCH) \
-DELF_FORMAT="$(ELF_FORMAT)" -DKERNEL_STACK_SIZE=$(STACK_SIZE)
# Options used by linker script
export LDS_START := $(START)
export LDS_ELF_ARCH := $(ELF_ARCH)
export LDS_ELF_FORMAT := $(ELF_FORMAT)
# The wrappers will select whether using "malloc" or the kernel allocator.
LINK_WRAPS = -Wl,--wrap,malloc -Wl,--wrap,free -Wl,--wrap,calloc
......
......@@ -3,6 +3,9 @@
# Licensed under the GPL
#
CPPFLAGS_vmlinux.lds := -U$(SUBARCH) -DSTART=$(LDS_START) \
-DELF_ARCH=$(LDS_ELF_ARCH) \
-DELF_FORMAT=$(LDS_ELF_FORMAT)
extra-y := vmlinux.lds
clean-files :=
......
KERNEL_STACK_SIZE = 4096 * (1 << CONFIG_KERNEL_STACK_ORDER);
#ifdef CONFIG_LD_SCRIPT_STATIC
#include "uml.lds.S"
#else
......
......@@ -27,7 +27,8 @@ sed-y = -e 's/(\(\.[a-z]*it\|\.ref\|\)\.text)/(\1.literal \1.text)/g' \
-e 's/(\(\.text\.[a-z]*\))/(\1.literal \1)/g'
quiet_cmd__cpp_lds_S = LDS $@
cmd__cpp_lds_S = $(CPP) $(cpp_flags) -D__ASSEMBLY__ $< | sed $(sed-y) >$@
cmd__cpp_lds_S = $(CPP) $(cpp_flags) -P -C -Uxtensa -D__ASSEMBLY__ $< \
| sed $(sed-y) >$@
$(obj)/vmlinux.lds: $(src)/vmlinux.lds.S FORCE
$(call if_changed_dep,_cpp_lds_S)
......@@ -270,7 +270,8 @@ targets += $(extra-y) $(MAKECMDGOALS) $(always)
# Linker scripts preprocessor (.lds.S -> .lds)
# ---------------------------------------------------------------------------
quiet_cmd_cpp_lds_S = LDS $@
cmd_cpp_lds_S = $(CPP) $(cpp_flags) -D__ASSEMBLY__ -o $@ $<
cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -C -U$(ARCH) \
-D__ASSEMBLY__ -o $@ $<
$(obj)/%.lds: $(src)/%.lds.S FORCE
$(call if_changed_dep,cpp_lds_S)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册