提交 508c8d60 编写于 作者: A Alex Deucher 提交者: Dave Airlie

drm/radeon/kms: fix up r1xx-rs4xx i2c buses

Fix the vbios mapping and only add the actual
buses that the cards have.  The existing code was
mostly correct.  Just clean up a few cases on r2xx/r3xx
and document that buses the hw actually has.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>
上级 87d7a1f9
......@@ -505,12 +505,18 @@ static struct radeon_i2c_bus_rec combios_setup_i2c_bus(struct radeon_device *rde
* DDC_VGA = RADEON_GPIO_VGA_DDC
* DDC_LCD = RADEON_GPIOPAD_MASK
* DDC_GPIO = RADEON_MDGPIO_MASK
* r1xx/r2xx
* r1xx
* DDC_MONID = RADEON_GPIO_MONID
* DDC_CRT2 = RADEON_GPIO_CRT2_DDC
* r3xx
* r200
* DDC_MONID = RADEON_GPIO_MONID
* DDC_CRT2 = RADEON_GPIO_DVI_DDC
* r300/r350
* DDC_MONID = RADEON_GPIO_DVI_DDC
* DDC_CRT2 = RADEON_GPIO_DVI_DDC
* rv2xx/rv3xx
* DDC_MONID = RADEON_GPIO_MONID
* DDC_CRT2 = RADEON_GPIO_MONID
* rs3xx/rs4xx
* DDC_MONID = RADEON_GPIOPAD_MASK
* DDC_CRT2 = RADEON_GPIO_MONID
......@@ -537,18 +543,21 @@ static struct radeon_i2c_bus_rec combios_setup_i2c_bus(struct radeon_device *rde
rdev->family == CHIP_RS400 ||
rdev->family == CHIP_RS480)
ddc_line = RADEON_GPIOPAD_MASK;
else if (rdev->family == CHIP_R300 ||
rdev->family == CHIP_R350)
ddc_line = RADEON_GPIO_DVI_DDC;
else
ddc_line = RADEON_GPIO_MONID;
break;
case DDC_CRT2:
if (rdev->family == CHIP_RS300 ||
rdev->family == CHIP_RS400 ||
rdev->family == CHIP_RS480)
ddc_line = RADEON_GPIO_MONID;
else if (rdev->family >= CHIP_R300) {
if (rdev->family == CHIP_R200 ||
rdev->family == CHIP_R300 ||
rdev->family == CHIP_R350)
ddc_line = RADEON_GPIO_DVI_DDC;
ddc = DDC_DVI;
} else
else if (rdev->family == CHIP_RS300 ||
rdev->family >= CHIP_RV350)
ddc_line = RADEON_GPIO_MONID;
else
ddc_line = RADEON_GPIO_CRT2_DDC;
break;
}
......@@ -709,26 +718,42 @@ void radeon_combios_i2c_init(struct radeon_device *rdev)
struct drm_device *dev = rdev->ddev;
struct radeon_i2c_bus_rec i2c;
/* actual hw pads
* r1xx/rs2xx/rs3xx
* 0x60, 0x64, 0x68, 0x6c, gpiopads, mm
* r200
* 0x60, 0x64, 0x68, mm
* r300/r350
* 0x60, 0x64, mm
* rv2xx/rv3xx/rs4xx
* 0x60, 0x64, 0x68, gpiopads, mm
*/
/* 0x60 */
i2c = combios_setup_i2c_bus(rdev, DDC_DVI, 0, 0);
rdev->i2c_bus[0] = radeon_i2c_create(dev, &i2c, "DVI_DDC");
/* 0x64 */
i2c = combios_setup_i2c_bus(rdev, DDC_VGA, 0, 0);
rdev->i2c_bus[1] = radeon_i2c_create(dev, &i2c, "VGA_DDC");
/* mm i2c */
i2c.valid = true;
i2c.hw_capable = true;
i2c.mm_i2c = true;
i2c.i2c_id = 0xa0;
rdev->i2c_bus[2] = radeon_i2c_create(dev, &i2c, "MM_I2C");
if (rdev->family == CHIP_RS300 ||
rdev->family == CHIP_RS400 ||
rdev->family == CHIP_RS480) {
if (rdev->family == CHIP_R300 ||
rdev->family == CHIP_R350) {
/* only 2 sw i2c pads */
} else if (rdev->family == CHIP_RS300 ||
rdev->family == CHIP_RS400 ||
rdev->family == CHIP_RS480) {
u16 offset;
u8 id, blocks, clk, data;
int i;
/* 0x68 */
i2c = combios_setup_i2c_bus(rdev, DDC_CRT2, 0, 0);
rdev->i2c_bus[3] = radeon_i2c_create(dev, &i2c, "MONID");
......@@ -740,6 +765,7 @@ void radeon_combios_i2c_init(struct radeon_device *rdev)
if (id == 136) {
clk = RBIOS8(offset + 3 + (i * 5) + 3);
data = RBIOS8(offset + 3 + (i * 5) + 4);
/* gpiopad */
i2c = combios_setup_i2c_bus(rdev, DDC_MONID,
(1 << clk), (1 << data));
rdev->i2c_bus[4] = radeon_i2c_create(dev, &i2c, "GPIOPAD_MASK");
......@@ -747,14 +773,15 @@ void radeon_combios_i2c_init(struct radeon_device *rdev)
}
}
}
} else if (rdev->family >= CHIP_R300) {
} else if (rdev->family >= CHIP_R200) {
/* 0x68 */
i2c = combios_setup_i2c_bus(rdev, DDC_MONID, 0, 0);
rdev->i2c_bus[3] = radeon_i2c_create(dev, &i2c, "MONID");
} else {
/* 0x68 */
i2c = combios_setup_i2c_bus(rdev, DDC_MONID, 0, 0);
rdev->i2c_bus[3] = radeon_i2c_create(dev, &i2c, "MONID");
/* 0x6c */
i2c = combios_setup_i2c_bus(rdev, DDC_CRT2, 0, 0);
rdev->i2c_bus[4] = radeon_i2c_create(dev, &i2c, "CRT2_DDC");
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册