Revert "Add non-Virtex5 support for LL TEMAC driver"

This reverts commit 45956914.

Uses virt_to_bus() and breaks the build.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

arch/microblaze/include/asm/system.h

@@ -12,7 +12,6 @@
 #include <asm/registers.h>
 #include <asm/setup.h>
 #include <asm/irqflags.h>
-#include <asm/cache.h>
 
 #include <asm-generic/cmpxchg.h>
 #include <asm-generic/cmpxchg-local.h>
@@ -97,14 +96,4 @@ extern struct dentry *of_debugfs_root;
 
 #define arch_align_stack(x) (x)
 
-/*
- * MicroBlaze doesn't handle unaligned accesses in hardware.
- *
- * Based on this we force the IP header alignment in network drivers.
- * We also modify NET_SKB_PAD to be a cacheline in size, thus maintaining
- * cacheline alignment of buffers.
- */
-#define NET_IP_ALIGN	2
-#define NET_SKB_PAD	L1_CACHE_BYTES
-
 #endif /* _ASM_MICROBLAZE_SYSTEM_H */

drivers/net/Kconfig

@@ -2435,8 +2435,8 @@ config MV643XX_ETH
 
 config XILINX_LL_TEMAC
 	tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
-	depends on PPC || MICROBLAZE
 	select PHYLIB
+	depends on PPC_DCR_NATIVE
 	help
 	  This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
 	  core used in Xilinx Spartan and Virtex FPGAs

drivers/net/ll_temac.h

@@ -5,11 +5,8 @@
 #include <linux/netdevice.h>
 #include <linux/of.h>
 #include <linux/spinlock.h>
-
-#ifdef CONFIG_PPC_DCR
 #include <asm/dcr.h>
 #include <asm/dcr-regs.h>
-#endif
 
 /* packet size info */
 #define XTE_HDR_SIZE			14      /* size of Ethernet header */
@@ -293,6 +290,9 @@ This option defaults to enabled (set) */
 
 #define TX_CONTROL_CALC_CSUM_MASK   1
 
+#define XTE_ALIGN       32
+#define BUFFER_ALIGN(adr) ((XTE_ALIGN - ((u32) adr)) % XTE_ALIGN)
+
 #define MULTICAST_CAM_TABLE_NUM 4
 
 /* TX/RX CURDESC_PTR points to first descriptor */
@@ -335,15 +335,9 @@ struct temac_local {
 	struct mii_bus *mii_bus;	/* MII bus reference */
 	int mdio_irqs[PHY_MAX_ADDR];	/* IRQs table for MDIO bus */
 
-	/* IO registers, dma functions and IRQs */
+	/* IO registers and IRQs */
 	void __iomem *regs;
-	void __iomem *sdma_regs;
-#ifdef CONFIG_PPC_DCR
 	dcr_host_t sdma_dcrs;
-#endif
-	u32 (*dma_in)(struct temac_local *, int);
-	void (*dma_out)(struct temac_local *, int, u32);
-
 	int tx_irq;
 	int rx_irq;
 	int emac_num;

drivers/net/ll_temac_main.c

@@ -20,6 +20,9 @@
  *   or rx, so this should be okay.
  *
  * TODO:
+ * - Fix driver to work on more than just Virtex5.  Right now the driver
+ *   assumes that the locallink DMA registers are accessed via DCR
+ *   instructions.
  * - Factor out locallink DMA code into separate driver
  * - Fix multicast assignment.
  * - Fix support for hardware checksumming.
@@ -112,85 +115,16 @@ void temac_indirect_out32(struct temac_local *lp, int reg, u32 value)
 	temac_iow(lp, XTE_CTL0_OFFSET, CNTLREG_WRITE_ENABLE_MASK | reg);
 }
 
-/**
- * temac_dma_in32 - Memory mapped DMA read, this function expects a
- * register input that is based on DCR word addresses which
- * are then converted to memory mapped byte addresses
- */
 static u32 temac_dma_in32(struct temac_local *lp, int reg)
-{
-	return in_be32((u32 *)(lp->sdma_regs + (reg << 2)));
-}
-
-/**
- * temac_dma_out32 - Memory mapped DMA read, this function expects a
- * register input that is based on DCR word addresses which
- * are then converted to memory mapped byte addresses
- */
-static void temac_dma_out32(struct temac_local *lp, int reg, u32 value)
-{
-	out_be32((u32 *)(lp->sdma_regs + (reg << 2)), value);
-}
-
-/* DMA register access functions can be DCR based or memory mapped.
- * The PowerPC 440 is DCR based, the PowerPC 405 and MicroBlaze are both
- * memory mapped.
- */
-#ifdef CONFIG_PPC_DCR
-
-/**
- * temac_dma_dcr_in32 - DCR based DMA read
- */
-static u32 temac_dma_dcr_in(struct temac_local *lp, int reg)
 {
 	return dcr_read(lp->sdma_dcrs, reg);
 }
 
-/**
- * temac_dma_dcr_out32 - DCR based DMA write
- */
-static void temac_dma_dcr_out(struct temac_local *lp, int reg, u32 value)
+static void temac_dma_out32(struct temac_local *lp, int reg, u32 value)
 {
 	dcr_write(lp->sdma_dcrs, reg, value);
 }
 
-/**
- * temac_dcr_setup - If the DMA is DCR based, then setup the address and
- * I/O  functions
- */
-static int temac_dcr_setup(struct temac_local *lp, struct of_device *op,
-				struct device_node *np)
-{
-	unsigned int dcrs;
-
-	/* setup the dcr address mapping if it's in the device tree */
-
-	dcrs = dcr_resource_start(np, 0);
-	if (dcrs != 0) {
-		lp->sdma_dcrs = dcr_map(np, dcrs, dcr_resource_len(np, 0));
-		lp->dma_in = temac_dma_dcr_in;
-		lp->dma_out = temac_dma_dcr_out;
-		dev_dbg(&op->dev, "DCR base: %x\n", dcrs);
-		return 0;
-	}
-	/* no DCR in the device tree, indicate a failure */
-	return -1;
-}
-
-#else
-
-/*
- * temac_dcr_setup - This is a stub for when DCR is not supported,
- * such as with MicroBlaze
- */
-static int temac_dcr_setup(struct temac_local *lp, struct of_device *op,
-				struct device_node *np)
-{
-	return -1;
-}
-
-#endif
-
 /**
  * temac_dma_bd_init - Setup buffer descriptor rings
  */
@@ -221,14 +155,14 @@ static int temac_dma_bd_init(struct net_device *ndev)
 		lp->rx_bd_v[i].next = lp->rx_bd_p +
 				sizeof(*lp->rx_bd_v) * ((i + 1) % RX_BD_NUM);
 
-		skb = netdev_alloc_skb_ip_align(ndev,
-						XTE_MAX_JUMBO_FRAME_SIZE);
-
+		skb = alloc_skb(XTE_MAX_JUMBO_FRAME_SIZE
+				+ XTE_ALIGN, GFP_ATOMIC);
 		if (skb == 0) {
 			dev_err(&ndev->dev, "alloc_skb error %d\n", i);
 			return -1;
 		}
 		lp->rx_skb[i] = skb;
+		skb_reserve(skb,  BUFFER_ALIGN(skb->data));
 		/* returns physical address of skb->data */
 		lp->rx_bd_v[i].phys = dma_map_single(ndev->dev.parent,
 						     skb->data,
@@ -238,23 +172,23 @@ static int temac_dma_bd_init(struct net_device *ndev)
 		lp->rx_bd_v[i].app0 = STS_CTRL_APP0_IRQONEND;
 	}
 
-	lp->dma_out(lp, TX_CHNL_CTRL, 0x10220400 |
+	temac_dma_out32(lp, TX_CHNL_CTRL, 0x10220400 |
 					  CHNL_CTRL_IRQ_EN |
 					  CHNL_CTRL_IRQ_DLY_EN |
 					  CHNL_CTRL_IRQ_COAL_EN);
 	/* 0x10220483 */
 	/* 0x00100483 */
-	lp->dma_out(lp, RX_CHNL_CTRL, 0xff010000 |
+	temac_dma_out32(lp, RX_CHNL_CTRL, 0xff010000 |
 					  CHNL_CTRL_IRQ_EN |
 					  CHNL_CTRL_IRQ_DLY_EN |
 					  CHNL_CTRL_IRQ_COAL_EN |
 					  CHNL_CTRL_IRQ_IOE);
 	/* 0xff010283 */
 
-	lp->dma_out(lp, RX_CURDESC_PTR,  lp->rx_bd_p);
-	lp->dma_out(lp, RX_TAILDESC_PTR,
+	temac_dma_out32(lp, RX_CURDESC_PTR,  lp->rx_bd_p);
+	temac_dma_out32(lp, RX_TAILDESC_PTR,
 		       lp->rx_bd_p + (sizeof(*lp->rx_bd_v) * (RX_BD_NUM - 1)));
-	lp->dma_out(lp, TX_CURDESC_PTR, lp->tx_bd_p);
+	temac_dma_out32(lp, TX_CURDESC_PTR, lp->tx_bd_p);
 
 	return 0;
 }
@@ -492,9 +426,9 @@ static void temac_device_reset(struct net_device *ndev)
 	temac_indirect_out32(lp, XTE_RXC1_OFFSET, val & ~XTE_RXC1_RXEN_MASK);
 
 	/* Reset Local Link (DMA) */
-	lp->dma_out(lp, DMA_CONTROL_REG, DMA_CONTROL_RST);
+	temac_dma_out32(lp, DMA_CONTROL_REG, DMA_CONTROL_RST);
 	timeout = 1000;
-	while (lp->dma_in(lp, DMA_CONTROL_REG) & DMA_CONTROL_RST) {
+	while (temac_dma_in32(lp, DMA_CONTROL_REG) & DMA_CONTROL_RST) {
 		udelay(1);
 		if (--timeout == 0) {
 			dev_err(&ndev->dev,
@@ -502,7 +436,7 @@ static void temac_device_reset(struct net_device *ndev)
 			break;
 		}
 	}
-	lp->dma_out(lp, DMA_CONTROL_REG, DMA_TAIL_ENABLE);
+	temac_dma_out32(lp, DMA_CONTROL_REG, DMA_TAIL_ENABLE);
 
 	temac_dma_bd_init(ndev);
 
@@ -663,7 +597,7 @@ static int temac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 		lp->tx_bd_tail = 0;
 
 	/* Kick off the transfer */
-	lp->dma_out(lp, TX_TAILDESC_PTR, tail_p); /* DMA start */
+	temac_dma_out32(lp, TX_TAILDESC_PTR, tail_p); /* DMA start */
 
 	return NETDEV_TX_OK;
 }
@@ -705,15 +639,16 @@ static void ll_temac_recv(struct net_device *ndev)
 		ndev->stats.rx_packets++;
 		ndev->stats.rx_bytes += length;
 
-		new_skb = netdev_alloc_skb_ip_align(ndev,
-						XTE_MAX_JUMBO_FRAME_SIZE);
-
+		new_skb = alloc_skb(XTE_MAX_JUMBO_FRAME_SIZE + XTE_ALIGN,
+				GFP_ATOMIC);
 		if (new_skb == 0) {
 			dev_err(&ndev->dev, "no memory for new sk_buff\n");
 			spin_unlock_irqrestore(&lp->rx_lock, flags);
 			return;
 		}
 
+		skb_reserve(new_skb, BUFFER_ALIGN(new_skb->data));
+
 		cur_p->app0 = STS_CTRL_APP0_IRQONEND;
 		cur_p->phys = dma_map_single(ndev->dev.parent, new_skb->data,
 					     XTE_MAX_JUMBO_FRAME_SIZE,
@@ -728,7 +663,7 @@ static void ll_temac_recv(struct net_device *ndev)
 		cur_p = &lp->rx_bd_v[lp->rx_bd_ci];
 		bdstat = cur_p->app0;
 	}
-	lp->dma_out(lp, RX_TAILDESC_PTR, tail_p);
+	temac_dma_out32(lp, RX_TAILDESC_PTR, tail_p);
 
 	spin_unlock_irqrestore(&lp->rx_lock, flags);
 }
@@ -739,8 +674,8 @@ static irqreturn_t ll_temac_tx_irq(int irq, void *_ndev)
 	struct temac_local *lp = netdev_priv(ndev);
 	unsigned int status;
 
-	status = lp->dma_in(lp, TX_IRQ_REG);
-	lp->dma_out(lp, TX_IRQ_REG, status);
+	status = temac_dma_in32(lp, TX_IRQ_REG);
+	temac_dma_out32(lp, TX_IRQ_REG, status);
 
 	if (status & (IRQ_COAL | IRQ_DLY))
 		temac_start_xmit_done(lp->ndev);
@@ -757,8 +692,8 @@ static irqreturn_t ll_temac_rx_irq(int irq, void *_ndev)
 	unsigned int status;
 
 	/* Read and clear the status registers */
-	status = lp->dma_in(lp, RX_IRQ_REG);
-	lp->dma_out(lp, RX_IRQ_REG, status);
+	status = temac_dma_in32(lp, RX_IRQ_REG);
+	temac_dma_out32(lp, RX_IRQ_REG, status);
 
 	if (status & (IRQ_COAL | IRQ_DLY))
 		ll_temac_recv(lp->ndev);
@@ -859,7 +794,7 @@ static ssize_t temac_show_llink_regs(struct device *dev,
 	int i, len = 0;
 
 	for (i = 0; i < 0x11; i++)
-		len += sprintf(buf + len, "%.8x%s", lp->dma_in(lp, i),
+		len += sprintf(buf + len, "%.8x%s", temac_dma_in32(lp, i),
 			       (i % 8) == 7 ? "\n" : " ");
 	len += sprintf(buf + len, "\n");
 
@@ -885,6 +820,7 @@ temac_of_probe(struct of_device *op, const struct of_device_id *match)
 	struct net_device *ndev;
 	const void *addr;
 	int size, rc = 0;
+	unsigned int dcrs;
 
 	/* Init network device structure */
 	ndev = alloc_etherdev(sizeof(*lp));
@@ -934,20 +870,13 @@ temac_of_probe(struct of_device *op, const struct of_device_id *match)
 		goto nodev;
 	}
 
-	/* Setup the DMA register accesses, could be DCR or memory mapped */
-	if (temac_dcr_setup(lp, op, np)) {
-
-		/* no DCR in the device tree, try non-DCR */
-		lp->sdma_regs = of_iomap(np, 0);
-		if (lp->sdma_regs) {
-			lp->dma_in = temac_dma_in32;
-			lp->dma_out = temac_dma_out32;
-			dev_dbg(&op->dev, "MEM base: %p\n", lp->sdma_regs);
-		} else {
-			dev_err(&op->dev, "unable to map DMA registers\n");
-			goto nodev;
-		}
+	dcrs = dcr_resource_start(np, 0);
+	if (dcrs == 0) {
+		dev_err(&op->dev, "could not get DMA register address\n");
+		goto nodev;
 	}
+	lp->sdma_dcrs = dcr_map(np, dcrs, dcr_resource_len(np, 0));
+	dev_dbg(&op->dev, "DCR base: %x\n", dcrs);
 
 	lp->rx_irq = irq_of_parse_and_map(np, 0);
 	lp->tx_irq = irq_of_parse_and_map(np, 1);