提交 4bde23f8 编写于 作者: L Linus Torvalds

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc fixes from Olof Johansson:
 "This is a first pass of some of the merge window fallout for ARM
  platforms.

  Nothing controversial:
   - A system.h fallout fix for OMAP
   - PXA fixes for breakage caused by the regulator struct changes
   - GPIO fixes for OMAP to properly deal with dynamic IRQ allocation
   - A mismerge in our arm-soc tree of an lpc32xx change for networking
   - A fix for USB setup on tegra
   - An undo of __init annotation of display mux setup on OMAP that's
     needed at runtime"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: pxa: fix build issue on stargate2
  ARM: pxa: fix build issue on cm-x300
  ARM: pxa: fix build failure for regulator consumer in em-x270.c
  ARM: LPC32xx: clock.c: Fix lpc-eth clock reference
  ARM: OMAP: pm: fix compilation break
  ARM: OMAP: Remove OMAP_GPIO_IRQ macro definition
  drivers: input: Fix OMAP_GPIO_IRQ with gpio_to_irq() in ams_delta_serio_exit()
  ARM: OMAP: boards: Fix OMAP_GPIO_IRQ usage with gpio_to_irq()
  ARM: pxa: fix regulator related build fail in magician_defconfig
  ARM: tegra: Fix device tree AUXDATA for USB/EHCI
  ARM: OMAP2+: Remove __init from DSI mux functions
......@@ -1134,7 +1134,7 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "i2s1_ck", clk_i2s1)
_REGISTER_CLOCK("ts-lpc32xx", NULL, clk_tsc)
_REGISTER_CLOCK("dev:mmc0", NULL, clk_mmc)
_REGISTER_CLOCK("lpc-net.0", NULL, clk_net)
_REGISTER_CLOCK("lpc-eth.0", NULL, clk_net)
_REGISTER_CLOCK("dev:clcd", NULL, clk_lcd)
_REGISTER_CLOCK("lpc32xx_udc", "ck_usbd", clk_usbd)
_REGISTER_CLOCK("lpc32xx_rtc", NULL, clk_rtc)
......
......@@ -245,8 +245,6 @@ static struct resource h2_smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = OMAP_GPIO_IRQ(0),
.end = OMAP_GPIO_IRQ(0),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
......@@ -359,11 +357,9 @@ static struct tps65010_board tps_board = {
static struct i2c_board_info __initdata h2_i2c_board_info[] = {
{
I2C_BOARD_INFO("tps65010", 0x48),
.irq = OMAP_GPIO_IRQ(58),
.platform_data = &tps_board,
}, {
I2C_BOARD_INFO("isp1301_omap", 0x2d),
.irq = OMAP_GPIO_IRQ(2),
},
};
......@@ -428,8 +424,12 @@ static void __init h2_init(void)
omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
h2_smc91x_resources[1].start = gpio_to_irq(0);
h2_smc91x_resources[1].end = gpio_to_irq(0);
platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
omap_serial_init();
h2_i2c_board_info[0].irq = gpio_to_irq(58);
h2_i2c_board_info[1].irq = gpio_to_irq(2);
omap_register_i2c_bus(1, 100, h2_i2c_board_info,
ARRAY_SIZE(h2_i2c_board_info));
omap1_usb_init(&h2_usb_config);
......
......@@ -247,8 +247,6 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = OMAP_GPIO_IRQ(40),
.end = OMAP_GPIO_IRQ(40),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
......@@ -338,7 +336,6 @@ static struct spi_board_info h3_spi_board_info[] __initdata = {
.modalias = "tsc2101",
.bus_num = 2,
.chip_select = 0,
.irq = OMAP_GPIO_IRQ(H3_TS_GPIO),
.max_speed_hz = 16000000,
/* .platform_data = &tsc_platform_data, */
},
......@@ -374,11 +371,9 @@ static struct omap_lcd_config h3_lcd_config __initdata = {
static struct i2c_board_info __initdata h3_i2c_board_info[] = {
{
I2C_BOARD_INFO("tps65013", 0x48),
/* .irq = OMAP_GPIO_IRQ(??), */
},
{
I2C_BOARD_INFO("isp1301_omap", 0x2d),
.irq = OMAP_GPIO_IRQ(14),
},
};
......@@ -420,10 +415,14 @@ static void __init h3_init(void)
omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
smc91x_resources[1].start = gpio_to_irq(40);
smc91x_resources[1].end = gpio_to_irq(40);
platform_add_devices(devices, ARRAY_SIZE(devices));
h3_spi_board_info[0].irq = gpio_to_irq(H3_TS_GPIO);
spi_register_board_info(h3_spi_board_info,
ARRAY_SIZE(h3_spi_board_info));
omap_serial_init();
h3_i2c_board_info[1].irq = gpio_to_irq(14);
omap_register_i2c_bus(1, 100, h3_i2c_board_info,
ARRAY_SIZE(h3_i2c_board_info));
omap1_usb_init(&h3_usb_config);
......
......@@ -324,8 +324,6 @@ static struct platform_device gpio_leds_device = {
static struct resource htcpld_resources[] = {
[0] = {
.start = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS),
.end = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS),
.flags = IORESOURCE_IRQ,
},
};
......@@ -450,7 +448,6 @@ static struct spi_board_info __initdata htcherald_spi_board_info[] = {
{
.modalias = "ads7846",
.platform_data = &htcherald_ts_platform_data,
.irq = OMAP_GPIO_IRQ(HTCHERALD_GPIO_TS),
.max_speed_hz = 2500000,
.bus_num = 2,
.chip_select = 1,
......@@ -576,6 +573,8 @@ static void __init htcherald_init(void)
printk(KERN_INFO "HTC Herald init.\n");
/* Do board initialization before we register all the devices */
htcpld_resources[0].start = gpio_to_irq(HTCHERALD_GIRQ_BTNS);
htcpld_resources[0].end = gpio_to_irq(HTCHERALD_GIRQ_BTNS);
platform_add_devices(devices, ARRAY_SIZE(devices));
htcherald_disable_watchdog();
......@@ -583,6 +582,7 @@ static void __init htcherald_init(void)
htcherald_usb_enable();
omap1_usb_init(&htcherald_usb_config);
htcherald_spi_board_info[0].irq = gpio_to_irq(HTCHERALD_GPIO_TS);
spi_register_board_info(htcherald_spi_board_info,
ARRAY_SIZE(htcherald_spi_board_info));
......
......@@ -248,8 +248,6 @@ static struct resource innovator1610_smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = OMAP_GPIO_IRQ(0),
.end = OMAP_GPIO_IRQ(0),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
......@@ -409,6 +407,8 @@ static void __init innovator_init(void)
#endif
#ifdef CONFIG_ARCH_OMAP16XX
if (!cpu_is_omap1510()) {
innovator1610_smc91x_resources[1].start = gpio_to_irq(0);
innovator1610_smc91x_resources[1].end = gpio_to_irq(0);
platform_add_devices(innovator1610_devices, ARRAY_SIZE(innovator1610_devices));
}
#endif
......
......@@ -147,7 +147,6 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = {
.bus_num = 2,
.chip_select = 0,
.max_speed_hz = 2500000,
.irq = OMAP_GPIO_IRQ(15),
.platform_data = &nokia770_ads7846_platform_data,
},
};
......@@ -237,6 +236,7 @@ static void __init omap_nokia770_init(void)
omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
nokia770_spi_board_info[1].irq = gpio_to_irq(15);
spi_register_board_info(nokia770_spi_board_info,
ARRAY_SIZE(nokia770_spi_board_info));
omap_serial_init();
......
......@@ -129,8 +129,6 @@ static struct resource osk5912_smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = OMAP_GPIO_IRQ(0),
.end = OMAP_GPIO_IRQ(0),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
......@@ -147,8 +145,6 @@ static struct platform_device osk5912_smc91x_device = {
static struct resource osk5912_cf_resources[] = {
[0] = {
.start = OMAP_GPIO_IRQ(62),
.end = OMAP_GPIO_IRQ(62),
.flags = IORESOURCE_IRQ,
},
};
......@@ -240,7 +236,6 @@ static struct tps65010_board tps_board = {
static struct i2c_board_info __initdata osk_i2c_board_info[] = {
{
I2C_BOARD_INFO("tps65010", 0x48),
.irq = OMAP_GPIO_IRQ(OMAP_MPUIO(1)),
.platform_data = &tps_board,
},
......@@ -408,7 +403,6 @@ static struct spi_board_info __initdata mistral_boardinfo[] = { {
/* MicroWire (bus 2) CS0 has an ads7846e */
.modalias = "ads7846",
.platform_data = &mistral_ts_info,
.irq = OMAP_GPIO_IRQ(4),
.max_speed_hz = 120000 /* max sample rate at 3V */
* 26 /* command + data + overhead */,
.bus_num = 2,
......@@ -471,6 +465,7 @@ static void __init osk_mistral_init(void)
gpio_direction_input(4);
irq_set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING);
mistral_boardinfo[0].irq = gpio_to_irq(4);
spi_register_board_info(mistral_boardinfo,
ARRAY_SIZE(mistral_boardinfo));
......@@ -542,6 +537,10 @@ static void __init osk_init(void)
osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
osk_flash_resource.end += SZ_32M - 1;
osk5912_smc91x_resources[1].start = gpio_to_irq(0);
osk5912_smc91x_resources[1].end = gpio_to_irq(0);
osk5912_cf_resources[0].start = gpio_to_irq(62);
osk5912_cf_resources[0].end = gpio_to_irq(62);
platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
l = omap_readl(USB_TRANSCEIVER_CTRL);
......@@ -556,6 +555,7 @@ static void __init osk_init(void)
gpio_direction_input(OMAP_MPUIO(1));
omap_serial_init();
osk_i2c_board_info[0].irq = gpio_to_irq(OMAP_MPUIO(1));
omap_register_i2c_bus(1, 400, osk_i2c_board_info,
ARRAY_SIZE(osk_i2c_board_info));
osk_mistral_init();
......
......@@ -217,7 +217,6 @@ static struct spi_board_info palmte_spi_info[] __initdata = {
.modalias = "tsc2102",
.bus_num = 2, /* uWire (officially) */
.chip_select = 0, /* As opposed to 3 */
.irq = OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO),
.max_speed_hz = 8000000,
},
};
......@@ -251,6 +250,7 @@ static void __init omap_palmte_init(void)
platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices));
palmte_spi_info[0].irq = gpio_to_irq(PALMTE_PINTDAV_GPIO);
spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
palmte_misc_gpio_setup();
omap_serial_init();
......
......@@ -257,7 +257,6 @@ static struct spi_board_info __initdata palmtt_boardinfo[] = {
/* MicroWire (bus 2) CS0 has an ads7846e */
.modalias = "ads7846",
.platform_data = &palmtt_ts_info,
.irq = OMAP_GPIO_IRQ(6),
.max_speed_hz = 120000 /* max sample rate at 3V */
* 26 /* command + data + overhead */,
.bus_num = 2,
......@@ -298,6 +297,7 @@ static void __init omap_palmtt_init(void)
platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices));
palmtt_boardinfo[0].irq = gpio_to_irq(6);
spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
omap_serial_init();
omap1_usb_init(&palmtt_usb_config);
......
......@@ -224,7 +224,6 @@ static struct spi_board_info __initdata palmz71_boardinfo[] = { {
/* MicroWire (bus 2) CS0 has an ads7846e */
.modalias = "ads7846",
.platform_data = &palmz71_ts_info,
.irq = OMAP_GPIO_IRQ(PALMZ71_PENIRQ_GPIO),
.max_speed_hz = 120000 /* max sample rate at 3V */
* 26 /* command + data + overhead */,
.bus_num = 2,
......@@ -313,6 +312,7 @@ omap_palmz71_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
palmz71_boardinfo[0].irq = gpio_to_irq(PALMZ71_PENIRQ_GPIO);
spi_register_board_info(palmz71_boardinfo,
ARRAY_SIZE(palmz71_boardinfo));
omap1_usb_init(&palmz71_usb_config);
......
......@@ -44,7 +44,6 @@
static struct plat_serial8250_port voiceblue_ports[] = {
{
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000),
.irq = OMAP_GPIO_IRQ(12),
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 1,
......@@ -52,7 +51,6 @@ static struct plat_serial8250_port voiceblue_ports[] = {
},
{
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x50000),
.irq = OMAP_GPIO_IRQ(13),
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 1,
......@@ -60,7 +58,6 @@ static struct plat_serial8250_port voiceblue_ports[] = {
},
{
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x60000),
.irq = OMAP_GPIO_IRQ(14),
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 1,
......@@ -68,7 +65,6 @@ static struct plat_serial8250_port voiceblue_ports[] = {
},
{
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x70000),
.irq = OMAP_GPIO_IRQ(15),
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 1,
......@@ -80,9 +76,6 @@ static struct plat_serial8250_port voiceblue_ports[] = {
static struct platform_device serial_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM1,
.dev = {
.platform_data = voiceblue_ports,
},
};
static int __init ext_uart_init(void)
......@@ -90,6 +83,11 @@ static int __init ext_uart_init(void)
if (!machine_is_voiceblue())
return -ENODEV;
voiceblue_ports[0].irq = gpio_to_irq(12);
voiceblue_ports[1].irq = gpio_to_irq(13);
voiceblue_ports[2].irq = gpio_to_irq(14);
voiceblue_ports[3].irq = gpio_to_irq(15);
serial_device.dev.platform_data = voiceblue_ports;
return platform_device_register(&serial_device);
}
arch_initcall(ext_uart_init);
......@@ -128,8 +126,6 @@ static struct resource voiceblue_smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = OMAP_GPIO_IRQ(8),
.end = OMAP_GPIO_IRQ(8),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
......@@ -275,6 +271,8 @@ static void __init voiceblue_init(void)
irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
voiceblue_smc91x_resources[1].start = gpio_to_irq(8);
voiceblue_smc91x_resources[1].end = gpio_to_irq(8);
platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
omap_board_config = voiceblue_config;
omap_board_config_size = ARRAY_SIZE(voiceblue_config);
......
......@@ -44,6 +44,7 @@
#include <linux/io.h>
#include <linux/atomic.h>
#include <asm/system_misc.h>
#include <asm/irq.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
......
......@@ -230,12 +230,12 @@ static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = {
{
I2C_BOARD_INFO("isp1301_omap", 0x2D),
.flags = I2C_CLIENT_WAKE,
.irq = OMAP_GPIO_IRQ(78),
},
};
static int __init omap2430_i2c_init(void)
{
sdp2430_i2c1_boardinfo[0].irq = gpio_to_irq(78);
omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
ARRAY_SIZE(sdp2430_i2c1_boardinfo));
omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ,
......
......@@ -907,7 +907,6 @@ static void __init omap4_sdp4430_wifi_mux_init(void)
}
static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = {
.irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
.board_ref_clock = WL12XX_REFCLOCK_26,
.board_tcxo_clock = WL12XX_TCXOCLOCK_26,
};
......@@ -917,6 +916,7 @@ static void __init omap4_sdp4430_wifi_init(void)
int ret;
omap4_sdp4430_wifi_mux_init();
omap4_sdp4430_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ);
ret = wl12xx_set_platform_data(&omap4_sdp4430_wlan_data);
if (ret)
pr_err("Error setting wl12xx data: %d\n", ret);
......
......@@ -136,8 +136,6 @@ static struct resource apollon_smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
.end = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
......@@ -341,6 +339,8 @@ static void __init omap_apollon_init(void)
* You have to mux them off in device drivers later on
* if not needed.
*/
apollon_smc91x_resources[1].start = gpio_to_irq(APOLLON_ETHR_GPIO_IRQ);
apollon_smc91x_resources[1].end = gpio_to_irq(APOLLON_ETHR_GPIO_IRQ);
platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
omap_serial_init();
omap_sdrc_init(NULL, NULL);
......
......@@ -411,7 +411,6 @@ static struct resource omap_dm9000_resources[] = {
.flags = IORESOURCE_MEM,
},
[2] = {
.start = OMAP_GPIO_IRQ(OMAP_DM9000_GPIO_IRQ),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
},
};
......@@ -639,6 +638,7 @@ static void __init devkit8000_init(void)
omap_hsmmc_init(mmc);
devkit8000_i2c_init();
omap_dm9000_resources[2].start = gpio_to_irq(OMAP_DM9000_GPIO_IRQ);
platform_add_devices(devkit8000_devices,
ARRAY_SIZE(devkit8000_devices));
......
......@@ -348,7 +348,6 @@ static struct at24_platform_data m24c01 = {
static struct i2c_board_info __initdata h4_i2c_board_info[] = {
{
I2C_BOARD_INFO("isp1301_omap", 0x2d),
.irq = OMAP_GPIO_IRQ(125),
},
{ /* EEPROM on mainboard */
I2C_BOARD_INFO("24c01", 0x52),
......@@ -377,6 +376,7 @@ static void __init omap_h4_init(void)
*/
board_mkp_init();
h4_i2c_board_info[0].irq = gpio_to_irq(125);
i2c_register_board_info(1, h4_i2c_board_info,
ARRAY_SIZE(h4_i2c_board_info));
......
......@@ -487,7 +487,6 @@ static struct platform_device omap3evm_wlan_regulator = {
};
struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
.irq = OMAP_GPIO_IRQ(OMAP3EVM_WLAN_IRQ_GPIO),
.board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
};
#endif
......@@ -623,6 +622,7 @@ static void __init omap3_evm_wl12xx_init(void)
int ret;
/* WL12xx WLAN Init */
omap3evm_wlan_data.irq = gpio_to_irq(OMAP3EVM_WLAN_IRQ_GPIO);
ret = wl12xx_set_platform_data(&omap3evm_wlan_data);
if (ret)
pr_err("error setting wl12xx data: %d\n", ret);
......
......@@ -231,7 +231,6 @@ static struct platform_device omap_vwlan_device = {
};
struct wl12xx_platform_data omap_panda_wlan_data __initdata = {
.irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
/* PANDA ref clock is 38.4 MHz */
.board_ref_clock = 2,
};
......@@ -558,6 +557,7 @@ static void __init omap4_panda_init(void)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, NULL, package);
omap_panda_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ);
ret = wl12xx_set_platform_data(&omap_panda_wlan_data);
if (ret)
pr_err("error setting wl12xx data: %d\n", ret);
......
......@@ -170,7 +170,6 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
.modalias = "tsc2005",
.bus_num = 1,
.chip_select = 0,
.irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),
.max_speed_hz = 6000000,
.controller_data = &tsc2005_mcspi_config,
.platform_data = &tsc2005_pdata,
......@@ -1129,6 +1128,8 @@ static void __init rx51_init_tsc2005(void)
}
tsc2005_pdata.set_reset = rx51_tsc2005_set_reset;
rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq =
gpio_to_irq(RX51_TSC2005_IRQ_GPIO);
}
void __init rx51_peripherals_init(void)
......
......@@ -43,7 +43,6 @@ static inline void __init zoom_init_smsc911x(void)
static struct plat_serial8250_port serial_platform_data[] = {
{
.mapbase = ZOOM_UART_BASE,
.irq = OMAP_GPIO_IRQ(102),
.flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
.irqflags = IRQF_SHARED | IRQF_TRIGGER_RISING,
.iotype = UPIO_MEM,
......@@ -89,6 +88,8 @@ static inline void __init zoom_init_quaduart(void)
if (gpio_request_one(quart_gpio, GPIOF_IN, "TL16CP754C GPIO") < 0)
printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n",
quart_gpio);
serial_platform_data[0].irq = gpio_to_irq(102);
}
static inline int omap_zoom_debugboard_detect(void)
......
......@@ -193,7 +193,6 @@ static struct platform_device omap_vwlan_device = {
};
static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
.irq = OMAP_GPIO_IRQ(OMAP_ZOOM_WLAN_IRQ_GPIO),
/* ZOOM ref clock is 26 MHz */
.board_ref_clock = 1,
};
......@@ -297,7 +296,10 @@ static void enable_board_wakeup_source(void)
void __init zoom_peripherals_init(void)
{
int ret = wl12xx_set_platform_data(&omap_zoom_wlan_data);
int ret;
omap_zoom_wlan_data.irq = gpio_to_irq(OMAP_ZOOM_WLAN_IRQ_GPIO);
ret = wl12xx_set_platform_data(&omap_zoom_wlan_data);
if (ret)
pr_err("error setting wl12xx data: %d\n", ret);
......
......@@ -76,7 +76,7 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
}
spi_bi->bus_num = bus_num;
spi_bi->irq = OMAP_GPIO_IRQ(gpio_pendown);
spi_bi->irq = gpio_to_irq(gpio_pendown);
if (board_pdata) {
board_pdata->gpio_pendown = gpio_pendown;
......
......@@ -99,7 +99,7 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initdata = {
{ "dss_hdmi", "omapdss_hdmi", -1 },
};
static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags)
static void __init omap4_hdmi_mux_pads(enum omap_hdmi_flags flags)
{
u32 reg;
u16 control_i2c_1;
......@@ -125,7 +125,7 @@ static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags)
}
}
static int __init omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
{
u32 enable_mask, enable_shift;
u32 pipd_mask, pipd_shift;
......@@ -166,7 +166,7 @@ int __init omap_hdmi_init(enum omap_hdmi_flags flags)
return 0;
}
static int __init omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
{
if (cpu_is_omap44xx())
return omap4_dsi_mux_pads(dsi_id, lane_mask);
......@@ -174,7 +174,7 @@ static int __init omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
return 0;
}
static void __init omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
{
if (cpu_is_omap44xx())
omap4_dsi_mux_pads(dsi_id, 0);
......
......@@ -17,6 +17,8 @@
#include <linux/export.h>
#include <linux/suspend.h>
#include <asm/system_misc.h>
#include <plat/omap-pm.h>
#include <plat/omap_device.h>
#include "common.h"
......
......@@ -714,7 +714,6 @@ struct da9030_battery_info cm_x300_battery_info = {
static struct regulator_consumer_supply buck2_consumers[] = {
{
.dev = NULL,
.supply = "vcc_core",
},
};
......
......@@ -1083,19 +1083,19 @@ static void __init em_x270_userspace_consumers_init(void)
}
/* DA9030 related initializations */
#define REGULATOR_CONSUMER(_name, _dev, _supply) \
#define REGULATOR_CONSUMER(_name, _dev_name, _supply) \
static struct regulator_consumer_supply _name##_consumers[] = { \
{ \
.dev = _dev, \
.dev_name = _dev_name, \
.supply = _supply, \
}, \
}
REGULATOR_CONSUMER(ldo3, &em_x270_gps_userspace_consumer.dev, "vcc gps");
REGULATOR_CONSUMER(ldo3, "reg-userspace-consumer.0", "vcc gps");
REGULATOR_CONSUMER(ldo5, NULL, "vcc cam");
REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio");
REGULATOR_CONSUMER(ldo10, "pxa2xx-mci", "vcc sdio");
REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
REGULATOR_CONSUMER(ldo19, &em_x270_gprs_userspace_consumer.dev, "vcc gprs");
REGULATOR_CONSUMER(ldo19, "reg-userspace-consumer.1", "vcc gprs");
REGULATOR_CONSUMER(buck2, NULL, "vcc_core");
#define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask) \
......
......@@ -681,11 +681,9 @@ static struct platform_device power_supply = {
static struct regulator_consumer_supply bq24022_consumers[] = {
{
.dev = &gpio_vbus.dev,
.supply = "vbus_draw",
},
{
.dev = &power_supply.dev,
.supply = "ac_draw",
},
};
......
......@@ -580,11 +580,9 @@ static struct platform_device power_supply = {
static struct regulator_consumer_supply bq24022_consumers[] = {
{
.dev = &gpio_vbus.dev,
.supply = "vbus_draw",
},
{
.dev = &power_supply.dev,
.supply = "ac_draw",
},
};
......
......@@ -152,7 +152,7 @@ static struct platform_device sht15 = {
static struct regulator_consumer_supply stargate2_sensor_3_con[] = {
{
.dev = &sht15.dev,
.dev_name = "sht15",
.supply = "vcc",
},
};
......
......@@ -68,11 +68,11 @@ struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S2_BASE, "tegra-i2s.1", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-das", TEGRA_APB_MISC_DAS_BASE, "tegra-das", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB_BASE, "tegra-ehci.0",
&tegra_ehci1_device.dev.platform_data),
&tegra_ehci1_pdata),
OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB2_BASE, "tegra-ehci.1",
&tegra_ehci2_device.dev.platform_data),
&tegra_ehci2_pdata),
OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB3_BASE, "tegra-ehci.2",
&tegra_ehci3_device.dev.platform_data),
&tegra_ehci3_pdata),
{}
};
......
......@@ -23,7 +23,6 @@
#include <linux/fsl_devices.h>
#include <linux/serial_8250.h>
#include <linux/i2c-tegra.h>
#include <linux/platform_data/tegra_usb.h>
#include <asm/pmu.h>
#include <mach/irqs.h>
#include <mach/iomap.h>
......@@ -446,18 +445,18 @@ static struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
.clk = "cdev2",
};
static struct tegra_ehci_platform_data tegra_ehci1_pdata = {
struct tegra_ehci_platform_data tegra_ehci1_pdata = {
.operating_mode = TEGRA_USB_OTG,
.power_down_on_bus_suspend = 1,
};
static struct tegra_ehci_platform_data tegra_ehci2_pdata = {
struct tegra_ehci_platform_data tegra_ehci2_pdata = {
.phy_config = &tegra_ehci2_ulpi_phy_config,
.operating_mode = TEGRA_USB_HOST,
.power_down_on_bus_suspend = 1,
};
static struct tegra_ehci_platform_data tegra_ehci3_pdata = {
struct tegra_ehci_platform_data tegra_ehci3_pdata = {
.operating_mode = TEGRA_USB_HOST,
.power_down_on_bus_suspend = 1,
};
......
......@@ -20,6 +20,11 @@
#define __MACH_TEGRA_DEVICES_H
#include <linux/platform_device.h>
#include <linux/platform_data/tegra_usb.h>
extern struct tegra_ehci_platform_data tegra_ehci1_pdata;
extern struct tegra_ehci_platform_data tegra_ehci2_pdata;
extern struct tegra_ehci_platform_data tegra_ehci3_pdata;
extern struct platform_device tegra_gpio_device;
extern struct platform_device tegra_pinmux_device;
......
......@@ -158,10 +158,6 @@
#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr))
#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES)
#define OMAP_GPIO_IRQ(nr) (OMAP_GPIO_IS_MPUIO(nr) ? \
IH_MPUIO_BASE + ((nr) & 0x0f) : \
IH_GPIO_BASE + (nr))
struct omap_gpio_dev_attr {
int bank_width; /* GPIO bank width */
bool dbck_flag; /* dbck required or not - True for OMAP3&4 */
......
......@@ -184,7 +184,7 @@ module_init(ams_delta_serio_init);
static void __exit ams_delta_serio_exit(void)
{
serio_unregister_port(ams_delta_serio);
free_irq(OMAP_GPIO_IRQ(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), 0);
free_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), 0);
gpio_free_array(ams_delta_gpios,
ARRAY_SIZE(ams_delta_gpios));
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册