提交 47b01b3a 编写于 作者: A Alan Cox 提交者: Linus Torvalds

tty: kref the rocket driver

We will need this kref fitted to make full use of the port operations.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 21bed701
......@@ -436,15 +436,15 @@ static void rp_do_transmit(struct r_port *info)
#endif
if (!info)
return;
if (!info->port.tty) {
printk(KERN_WARNING "rp: WARNING %s called with "
"info->port.tty==NULL\n", __func__);
tty = tty_port_tty_get(&info->port);
if (tty == NULL) {
printk(KERN_WARNING "rp: WARNING %s called with tty==NULL\n", __func__);
clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
return;
}
spin_lock_irqsave(&info->slock, flags);
tty = info->port.tty;
info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
/* Loop sending data to FIFO until done or FIFO full */
......@@ -478,6 +478,7 @@ static void rp_do_transmit(struct r_port *info)
}
spin_unlock_irqrestore(&info->slock, flags);
tty_kref_put(tty);
#ifdef ROCKET_DEBUG_INTR
printk(KERN_DEBUG "(%d,%d,%d,%d)...\n", info->xmit_cnt, info->xmit_head,
......@@ -504,13 +505,13 @@ static void rp_handle_port(struct r_port *info)
"info->flags & NOT_INIT\n");
return;
}
if (!info->port.tty) {
tty = tty_port_tty_get(&info->port);
if (!tty) {
printk(KERN_WARNING "rp: WARNING: rp_handle_port called with "
"info->port.tty==NULL\n");
"tty==NULL\n");
return;
}
cp = &info->channel;
tty = info->port.tty;
IntMask = sGetChanIntID(cp) & info->intmask;
#ifdef ROCKET_DEBUG_INTR
......@@ -542,6 +543,7 @@ static void rp_handle_port(struct r_port *info)
printk(KERN_INFO "DSR change...\n");
}
#endif
tty_kref_put(tty);
}
/*
......@@ -710,7 +712,7 @@ static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev)
* Configures a rocketport port according to its termio settings. Called from
* user mode into the driver (exception handler). *info CD manipulation is spinlock protected.
*/
static void configure_r_port(struct r_port *info,
static void configure_r_port(struct tty_struct *tty, struct r_port *info,
struct ktermios *old_termios)
{
unsigned cflag;
......@@ -718,7 +720,7 @@ static void configure_r_port(struct r_port *info,
unsigned rocketMode;
int bits, baud, divisor;
CHANNEL_t *cp;
struct ktermios *t = info->port.tty->termios;
struct ktermios *t = tty->termios;
cp = &info->channel;
cflag = t->c_cflag;
......@@ -751,7 +753,7 @@ static void configure_r_port(struct r_port *info,
}
/* baud rate */
baud = tty_get_baud_rate(info->port.tty);
baud = tty_get_baud_rate(tty);
if (!baud)
baud = 9600;
divisor = ((rp_baud_base[info->board] + (baud >> 1)) / baud) - 1;
......@@ -769,7 +771,7 @@ static void configure_r_port(struct r_port *info,
sSetBaud(cp, divisor);
/* FIXME: Should really back compute a baud rate from the divisor */
tty_encode_baud_rate(info->port.tty, baud, baud);
tty_encode_baud_rate(tty, baud, baud);
if (cflag & CRTSCTS) {
info->intmask |= DELTA_CTS;
......@@ -794,15 +796,15 @@ static void configure_r_port(struct r_port *info,
* Handle software flow control in the board
*/
#ifdef ROCKET_SOFT_FLOW
if (I_IXON(info->port.tty)) {
if (I_IXON(tty)) {
sEnTxSoftFlowCtl(cp);
if (I_IXANY(info->port.tty)) {
if (I_IXANY(tty)) {
sEnIXANY(cp);
} else {
sDisIXANY(cp);
}
sSetTxXONChar(cp, START_CHAR(info->port.tty));
sSetTxXOFFChar(cp, STOP_CHAR(info->port.tty));
sSetTxXONChar(cp, START_CHAR(tty));
sSetTxXOFFChar(cp, STOP_CHAR(tty));
} else {
sDisTxSoftFlowCtl(cp);
sDisIXANY(cp);
......@@ -814,24 +816,24 @@ static void configure_r_port(struct r_port *info,
* Set up ignore/read mask words
*/
info->read_status_mask = STMRCVROVRH | 0xFF;
if (I_INPCK(info->port.tty))
if (I_INPCK(tty))
info->read_status_mask |= STMFRAMEH | STMPARITYH;
if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
if (I_BRKINT(tty) || I_PARMRK(tty))
info->read_status_mask |= STMBREAKH;
/*
* Characters to ignore
*/
info->ignore_status_mask = 0;
if (I_IGNPAR(info->port.tty))
if (I_IGNPAR(tty))
info->ignore_status_mask |= STMFRAMEH | STMPARITYH;
if (I_IGNBRK(info->port.tty)) {
if (I_IGNBRK(tty)) {
info->ignore_status_mask |= STMBREAKH;
/*
* If we're ignoring parity and break indicators,
* ignore overruns too. (For real raw support).
*/
if (I_IGNPAR(info->port.tty))
if (I_IGNPAR(tty))
info->ignore_status_mask |= STMRCVROVRH;
}
......@@ -1015,7 +1017,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp)
info->xmit_buf = (unsigned char *) page;
tty->driver_data = info;
info->port.tty = tty;
tty_port_tty_set(&info->port, tty);
if (info->port.count++ == 0) {
atomic_inc(&rp_num_ports_open);
......@@ -1062,15 +1064,15 @@ static int rp_open(struct tty_struct *tty, struct file *filp)
* Set up the tty->alt_speed kludge
*/
if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI)
info->port.tty->alt_speed = 57600;
tty->alt_speed = 57600;
if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI)
info->port.tty->alt_speed = 115200;
tty->alt_speed = 115200;
if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI)
info->port.tty->alt_speed = 230400;
tty->alt_speed = 230400;
if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP)
info->port.tty->alt_speed = 460800;
tty->alt_speed = 460800;
configure_r_port(info, NULL);
configure_r_port(tty, info, NULL);
if (tty->termios->c_cflag & CBAUD) {
sSetDTR(cp);
sSetRTS(cp);
......@@ -1227,7 +1229,7 @@ static void rp_set_termios(struct tty_struct *tty,
/* Or CMSPAR */
tty->termios->c_cflag &= ~CMSPAR;
configure_r_port(info, old_termios);
configure_r_port(tty, info, old_termios);
cp = &info->channel;
......@@ -1352,7 +1354,8 @@ static int get_config(struct r_port *info, struct rocket_config __user *retinfo)
return 0;
}
static int set_config(struct r_port *info, struct rocket_config __user *new_info)
static int set_config(struct tty_struct *tty, struct r_port *info,
struct rocket_config __user *new_info)
{
struct rocket_config new_serial;
......@@ -1364,7 +1367,7 @@ static int set_config(struct r_port *info, struct rocket_config __user *new_info
if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK))
return -EPERM;
info->flags = ((info->flags & ~ROCKET_USR_MASK) | (new_serial.flags & ROCKET_USR_MASK));
configure_r_port(info, NULL);
configure_r_port(tty, info, NULL);
return 0;
}
......@@ -1373,15 +1376,15 @@ static int set_config(struct r_port *info, struct rocket_config __user *new_info
info->port.closing_wait = new_serial.closing_wait;
if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI)
info->port.tty->alt_speed = 57600;
tty->alt_speed = 57600;
if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI)
info->port.tty->alt_speed = 115200;
tty->alt_speed = 115200;
if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI)
info->port.tty->alt_speed = 230400;
tty->alt_speed = 230400;
if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP)
info->port.tty->alt_speed = 460800;
tty->alt_speed = 460800;
configure_r_port(info, NULL);
configure_r_port(tty, info, NULL);
return 0;
}
......@@ -1466,7 +1469,7 @@ static int rp_ioctl(struct tty_struct *tty, struct file *file,
ret = get_config(info, argp);
break;
case RCKP_SET_CONFIG:
ret = set_config(info, argp);
ret = set_config(tty, info, argp);
break;
case RCKP_GET_PORTS:
ret = get_ports(info, argp);
......@@ -1658,7 +1661,7 @@ static void rp_hangup(struct tty_struct *tty)
info->port.count = 0;
info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
info->port.tty = NULL;
tty_port_tty_set(&info->port, NULL);
cp = &info->channel;
sDisRxFIFO(cp);
......@@ -1778,7 +1781,8 @@ static int rp_write(struct tty_struct *tty,
/* Write remaining data into the port's xmit_buf */
while (1) {
if (!info->port.tty) /* Seemingly obligatory check... */
/* Hung up ? */
if (!test_bit(ASYNC_NORMAL_ACTIVE, &info->port.flags))
goto end;
c = min(count, XMIT_BUF_SIZE - info->xmit_cnt - 1);
c = min(c, XMIT_BUF_SIZE - info->xmit_head);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册