提交 45e829ea 编写于 作者: S Stefan Assmann 提交者: Jesse Barnes

PCI: change PCI nomenclature in drivers/pci/ (comment changes)

Changing occurrences of variants of PCI-X and PCIe to the PCI-SIG
terms listed in the "Trademark and Logo Usage Guidelines".
http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf

Patch is limited to drivers/pci/ and changes concern comments only.
Signed-off-by: NStefan Assmann <sassmann@redhat.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
上级 57148688
......@@ -121,7 +121,7 @@ struct controller {
#define PCI_DEVICE_ID_AMD_GOLAM_7450 0x7450
#define PCI_DEVICE_ID_AMD_POGO_7458 0x7458
/* AMD PCIX bridge registers */
/* AMD PCI-X bridge registers */
#define PCIX_MEM_BASE_LIMIT_OFFSET 0x1C
#define PCIX_MISCII_OFFSET 0x48
#define PCIX_MISC_BRIDGE_ERRORS_OFFSET 0x80
......
......@@ -304,7 +304,7 @@ struct device_domain_info {
int segment; /* PCI domain */
u8 bus; /* PCI bus number */
u8 devfn; /* PCI devfn number */
struct pci_dev *dev; /* it's NULL for PCIE-to-PCI bridge */
struct pci_dev *dev; /* it's NULL for PCIe-to-PCI bridge */
struct intel_iommu *iommu; /* IOMMU used by this device */
struct dmar_domain *domain; /* pointer to domain */
};
......@@ -1611,7 +1611,7 @@ domain_context_mapping(struct dmar_domain *domain, struct pci_dev *pdev,
return ret;
parent = parent->bus->self;
}
if (pci_is_pcie(tmp)) /* this is a PCIE-to-PCI bridge */
if (pci_is_pcie(tmp)) /* this is a PCIe-to-PCI bridge */
return domain_context_mapping_one(domain,
pci_domain_nr(tmp->subordinate),
tmp->subordinate->number, 0,
......@@ -3319,7 +3319,7 @@ static void iommu_detach_dependent_devices(struct intel_iommu *iommu,
parent->devfn);
parent = parent->bus->self;
}
if (pci_is_pcie(tmp)) /* this is a PCIE-to-PCI bridge */
if (pci_is_pcie(tmp)) /* this is a PCIe-to-PCI bridge */
iommu_detach_dev(iommu,
tmp->subordinate->number, 0);
else /* this is a legacy PCI bridge */
......
......@@ -528,7 +528,7 @@ int set_msi_sid(struct irte *irte, struct pci_dev *dev)
bridge = pci_find_upstream_pcie_bridge(dev);
if (bridge) {
if (pci_is_pcie(bridge))/* this is a PCIE-to-PCI/PCIX bridge */
if (pci_is_pcie(bridge))/* this is a PCIe-to-PCI/PCIX bridge */
set_irte_sid(irte, SVT_VERIFY_BUS, SQ_ALL_16,
(bridge->bus->number << 8) | dev->bus->number);
else /* this is a legacy PCI bridge */
......
......@@ -1153,11 +1153,11 @@ pci_disable_device(struct pci_dev *dev)
/**
* pcibios_set_pcie_reset_state - set reset state for device dev
* @dev: the PCI-E device reset
* @dev: the PCIe device reset
* @state: Reset state to enter into
*
*
* Sets the PCI-E reset state for the device. This is the default
* Sets the PCIe reset state for the device. This is the default
* implementation. Architecture implementations can override this.
*/
int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev,
......@@ -1168,7 +1168,7 @@ int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev,
/**
* pci_set_pcie_reset_state - set reset state for device dev
* @dev: the PCI-E device reset
* @dev: the PCIe device reset
* @state: Reset state to enter into
*
*
......
/*
* PCIE AER software error injection support.
* PCIe AER software error injection support.
*
* Debuging PCIE AER code is quite difficult because it is hard to
* Debuging PCIe AER code is quite difficult because it is hard to
* trigger various real hardware errors. Software based error
* injection can fake almost all kinds of errors with the help of a
* user space helper tool aer-inject, which can be gotten from:
......
......@@ -155,7 +155,7 @@ static struct aer_rpc *aer_alloc_rpc(struct pcie_device *dev)
mutex_init(&rpc->rpc_mutex);
init_waitqueue_head(&rpc->wait_release);
/* Use PCIE bus function to store rpc into PCIE device */
/* Use PCIe bus function to store rpc into PCIe device */
set_service_data(dev, rpc);
return rpc;
......
......@@ -24,7 +24,7 @@
*
* @return: Zero on success. Nonzero otherwise.
*
* Invoked when PCIE bus loads AER service driver. To avoid conflict with
* Invoked when PCIe bus loads AER service driver. To avoid conflict with
* BIOS AER support requires BIOS to yield AER control to OS native driver.
**/
int aer_osc_setup(struct pcie_device *pciedev)
......
......@@ -587,7 +587,7 @@ static void handle_error_source(struct pcie_device *aerdev,
* aer_enable_rootport - enable Root Port's interrupts when receiving messages
* @rpc: pointer to a Root Port data structure
*
* Invoked when PCIE bus loads AER service driver.
* Invoked when PCIe bus loads AER service driver.
*/
void aer_enable_rootport(struct aer_rpc *rpc)
{
......@@ -597,7 +597,7 @@ void aer_enable_rootport(struct aer_rpc *rpc)
u32 reg32;
pos = pci_pcie_cap(pdev);
/* Clear PCIE Capability's Device Status */
/* Clear PCIe Capability's Device Status */
pci_read_config_word(pdev, pos+PCI_EXP_DEVSTA, &reg16);
pci_write_config_word(pdev, pos+PCI_EXP_DEVSTA, reg16);
......@@ -631,7 +631,7 @@ void aer_enable_rootport(struct aer_rpc *rpc)
* disable_root_aer - disable Root Port's interrupts when receiving messages
* @rpc: pointer to a Root Port data structure
*
* Invoked when PCIE bus unloads AER service driver.
* Invoked when PCIe bus unloads AER service driver.
*/
static void disable_root_aer(struct aer_rpc *rpc)
{
......
/*
* File: drivers/pci/pcie/aspm.c
* Enabling PCIE link L0s/L1 state and Clock Power Management
* Enabling PCIe link L0s/L1 state and Clock Power Management
*
* Copyright (C) 2007 Intel
* Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com)
......@@ -499,7 +499,7 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev)
int pos;
u32 reg32;
/*
* Some functions in a slot might not all be PCIE functions,
* Some functions in a slot might not all be PCIe functions,
* very strange. Disable ASPM for the whole slot
*/
list_for_each_entry(child, &pdev->subordinate->devices, bus_list) {
......
......@@ -15,9 +15,9 @@
DECLARE_RWSEM(pci_bus_sem);
/*
* find the upstream PCIE-to-PCI bridge of a PCI device
* find the upstream PCIe-to-PCI bridge of a PCI device
* if the device is PCIE, return NULL
* if the device isn't connected to a PCIE bridge (that is its parent is a
* if the device isn't connected to a PCIe bridge (that is its parent is a
* legacy PCI bridge and the bridge is directly connected to bus 0), return its
* parent
*/
......@@ -37,7 +37,7 @@ pci_find_upstream_pcie_bridge(struct pci_dev *pdev)
tmp = pdev;
continue;
}
/* PCI device should connect to a PCIE bridge */
/* PCI device should connect to a PCIe bridge */
if (pdev->pcie_type != PCI_EXP_TYPE_PCI_BRIDGE) {
/* Busted hardware? */
WARN_ON_ONCE(1);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册