mfd: Push byte swap out of WM8994 bulk I/O

For bulk I/O it is both convenient and more sensible to pre-swap the data
rather than doing the swap as part of the I/O operation so move the byte
swaps we're currently doing into the core write function into the register
based functions, giving the bulk write function a straight pass through
to the chip.

This leaves reads inconsistent, this will be addressed as a followup patch.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

drivers/mfd/wm8994-core.c

@@ -107,9 +107,7 @@ static int wm8994_write(struct wm8994 *wm8994, unsigned short reg,
 
 	for (i = 0; i < bytes / 2; i++) {
 		dev_vdbg(wm8994->dev, "Write %04x to R%d(0x%x)\n",
-			 buf[i], reg + i, reg + i);
-
-		buf[i] = cpu_to_be16(buf[i]);
+			 be16_to_cpu(buf[i]), reg + i, reg + i);
 	}
 
 	return wm8994->write_dev(wm8994, reg, bytes, src);
@@ -127,6 +125,8 @@ int wm8994_reg_write(struct wm8994 *wm8994, unsigned short reg,
 {
 	int ret;
 
+	val = cpu_to_be16(val);
+
 	mutex_lock(&wm8994->io_lock);
 
 	ret = wm8994_write(wm8994, reg, 2, &val);
@@ -143,7 +143,7 @@ EXPORT_SYMBOL_GPL(wm8994_reg_write);
  * @wm8994: Device to write to
  * @reg: First register
  * @count: Number of registers
- * @buf: Buffer to write from.
+ * @buf: Buffer to write from.  Data must be big-endian formatted.
  */
 int wm8994_bulk_write(struct wm8994 *wm8994, unsigned short reg,
 		      int count, u16 *buf)
@@ -183,6 +183,8 @@ int wm8994_set_bits(struct wm8994 *wm8994, unsigned short reg,
 	r &= ~mask;
 	r |= val;
 
+	r = cpu_to_be16(r);
+
 	ret = wm8994_write(wm8994, reg, 2, &r);
 
 out: