提交 3fa63c7d 编写于 作者: J Jean Delvare 提交者: Linus Torvalds

[PATCH] Typo fix: dot after newline in printk strings

Typo fix: dots appearing after a newline in printk strings.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 dfb7dac3
...@@ -790,7 +790,7 @@ static int __init a2232board_init(void) ...@@ -790,7 +790,7 @@ static int __init a2232board_init(void)
} }
printk("Total: %d A2232 boards initialized.\n.", nr_a2232); /* Some status report if no card was found */ printk("Total: %d A2232 boards initialized.\n", nr_a2232); /* Some status report if no card was found */
a2232_init_portstructs(); a2232_init_portstructs();
......
...@@ -90,7 +90,7 @@ static void i2o_report_fail_status(u8 req_status, u32 * msg) ...@@ -90,7 +90,7 @@ static void i2o_report_fail_status(u8 req_status, u32 * msg)
}; };
if (req_status == I2O_FSC_TRANSPORT_UNKNOWN_FAILURE) if (req_status == I2O_FSC_TRANSPORT_UNKNOWN_FAILURE)
printk(KERN_DEBUG "TRANSPORT_UNKNOWN_FAILURE (%0#2x)\n.", printk(KERN_DEBUG "TRANSPORT_UNKNOWN_FAILURE (%0#2x).\n",
req_status); req_status);
else else
printk(KERN_DEBUG "TRANSPORT_%s.\n", printk(KERN_DEBUG "TRANSPORT_%s.\n",
......
...@@ -137,7 +137,7 @@ islpci_mgmt_rx_fill(struct net_device *ndev) ...@@ -137,7 +137,7 @@ islpci_mgmt_rx_fill(struct net_device *ndev)
PCI_DMA_FROMDEVICE); PCI_DMA_FROMDEVICE);
if (!buf->pci_addr) { if (!buf->pci_addr) {
printk(KERN_WARNING printk(KERN_WARNING
"Failed to make memory DMA'able\n."); "Failed to make memory DMA'able.\n");
return -ENOMEM; return -ENOMEM;
} }
} }
......
...@@ -1077,7 +1077,7 @@ static int enable_slot(struct hotplug_slot *hs) ...@@ -1077,7 +1077,7 @@ static int enable_slot(struct hotplug_slot *hs)
if (rc) { if (rc) {
err("Adding this card exceeds the limitations of this bus.\n"); err("Adding this card exceeds the limitations of this bus.\n");
err("(i.e., >1 133MHz cards running on same bus, or " err("(i.e., >1 133MHz cards running on same bus, or "
">2 66 PCI cards running on same bus\n."); ">2 66 PCI cards running on same bus.\n");
err("Try hot-adding into another bus\n"); err("Try hot-adding into another bus\n");
rc = -EINVAL; rc = -EINVAL;
goto error_nopower; goto error_nopower;
......
...@@ -198,7 +198,7 @@ static int hid_pid_upload_effect(struct input_dev *dev, ...@@ -198,7 +198,7 @@ static int hid_pid_upload_effect(struct input_dev *dev,
} }
effect->id = id; effect->id = id;
dev_dbg(&pid_private->hid->dev->dev, "effect ID is %d\n.", id); dev_dbg(&pid_private->hid->dev->dev, "effect ID is %d.\n", id);
pid_private->effects[id].owner = current->pid; pid_private->effects[id].owner = current->pid;
pid_private->effects[id].flags = (1 << FF_PID_FLAGS_USED); pid_private->effects[id].flags = (1 << FF_PID_FLAGS_USED);
spin_unlock_irqrestore(&pid_private->lock, flags); spin_unlock_irqrestore(&pid_private->lock, flags);
......
...@@ -48,7 +48,7 @@ static int checkentry(const char *tablename, const struct ipt_ip *ip, ...@@ -48,7 +48,7 @@ static int checkentry(const char *tablename, const struct ipt_ip *ip,
unsigned int hook_mask) unsigned int hook_mask)
{ {
if (matchsize != IPT_ALIGN(sizeof(struct ipt_addrtype_info))) { if (matchsize != IPT_ALIGN(sizeof(struct ipt_addrtype_info))) {
printk(KERN_ERR "ipt_addrtype: invalid size (%u != %Zu)\n.", printk(KERN_ERR "ipt_addrtype: invalid size (%u != %Zu)\n",
matchsize, IPT_ALIGN(sizeof(struct ipt_addrtype_info))); matchsize, IPT_ALIGN(sizeof(struct ipt_addrtype_info)));
return 0; return 0;
} }
......
...@@ -6062,7 +6062,7 @@ static int awe_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id ...@@ -6062,7 +6062,7 @@ static int awe_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id
io1 = pnp_port_start(dev,0); io1 = pnp_port_start(dev,0);
io2 = pnp_port_start(dev,1); io2 = pnp_port_start(dev,1);
io3 = pnp_port_start(dev,2); io3 = pnp_port_start(dev,2);
printk(KERN_INFO "AWE32: A PnP Wave Table was detected at IO's %#x,%#x,%#x\n.", printk(KERN_INFO "AWE32: A PnP Wave Table was detected at IO's %#x,%#x,%#x.\n",
io1, io2, io3); io1, io2, io3);
setup_ports(io1, io2, io3); setup_ports(io1, io2, io3);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册