sh: Add SH7720 CPU support.

This adds support for the SH7720 (SH3-DSP) CPU.

Signed-off by: Markus Brunner <super.firetwister@gmail.com>
Signed-off by: Mark Jonas <toertel@gmail.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

arch/sh/Kconfig.debug

@@ -34,6 +34,7 @@ config EARLY_SCIF_CONSOLE_PORT
 	default "0xfffe9800" if CPU_SUBTYPE_SH7206
 	default "0xf8420000" if CPU_SUBTYPE_SH7619
 	default "0xa4400000" if CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7705
+	default "0xa4430000" if CPU_SUBTYPE_SH7720
 	default "0xffc30000" if CPU_SUBTYPE_SHX3
 	default "0xffe80000" if CPU_SH4
 	default "0x00000000"

arch/sh/drivers/dma/Kconfig

@@ -12,6 +12,7 @@ config SH_DMA
 config NR_ONCHIP_DMA_CHANNELS
 	int
 	depends on SH_DMA
+	default "6" if CPU_SUBTYPE_SH7720
 	default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R
 	default "12" if CPU_SUBTYPE_SH7780
 	default "4"

arch/sh/drivers/dma/dma-sh.c

@@ -24,13 +24,18 @@ static int dmte_irq_map[] = {
 	DMTE1_IRQ,
 	DMTE2_IRQ,
 	DMTE3_IRQ,
-#if defined(CONFIG_CPU_SUBTYPE_SH7751R) ||	\
+#if defined(CONFIG_CPU_SUBTYPE_SH7720)  ||	\
+    defined(CONFIG_CPU_SUBTYPE_SH7751R) ||	\
     defined(CONFIG_CPU_SUBTYPE_SH7760)  ||	\
     defined(CONFIG_CPU_SUBTYPE_SH7780)
 	DMTE4_IRQ,
 	DMTE5_IRQ,
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7751R) ||	\
+    defined(CONFIG_CPU_SUBTYPE_SH7760)  ||	\
+    defined(CONFIG_CPU_SUBTYPE_SH7780)
 	DMTE6_IRQ,
-	DMTE7_IRQ,    
+	DMTE7_IRQ,
 #endif
 };
 
@@ -196,7 +201,8 @@ static int sh_dmac_get_dma_residue(struct dma_channel *chan)
 	return ctrl_inl(DMATCR[chan->chan]) << calc_xmit_shift(chan);
 }
 
-#ifdef CONFIG_CPU_SUBTYPE_SH7780
+#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7780)
 #define dmaor_read_reg()	ctrl_inw(DMAOR)
 #define dmaor_write_reg(data)	ctrl_outw(data, DMAOR)
 #else

arch/sh/kernel/cpu/sh3/Makefile

@@ -12,6 +12,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7708)	+= setup-sh770x.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7709)	+= setup-sh770x.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7710)	+= setup-sh7710.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7712)	+= setup-sh7710.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7720)	+= setup-sh7720.o
 
 # Primary on-chip clocks (common)
 clock-$(CONFIG_CPU_SH3)			:= clock-sh3.o
@@ -19,5 +20,6 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7705)	:= clock-sh7705.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7706)	:= clock-sh7706.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7709)	:= clock-sh7709.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7710)	:= clock-sh7710.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7720)	:= clock-sh7710.o
 
 obj-y	+= $(clock-y)

arch/sh/kernel/cpu/sh3/probe.c

@@ -81,6 +81,9 @@ int __init detect_cpu_and_cache_system(void)
 #if defined(CONFIG_CPU_SUBTYPE_SH7712)
 		current_cpu_data.type = CPU_SH7712;
 #endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7720)
+		current_cpu_data.type = CPU_SH7720;
+#endif
 #if defined(CONFIG_CPU_SUBTYPE_SH7705)
 		current_cpu_data.type = CPU_SH7705;
 

arch/sh/kernel/cpu/sh3/setup-sh7720.c

+/*
+ * SH7720 Setup
+ *
+ *  Copyright (C) 2007  Markus Brunner, Mark Jonas
+ *
+ *  Based on arch/sh/kernel/cpu/sh4/setup-sh7750.c:
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *  Copyright (C) 2006  Jamie Lenehan
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/io.h>
+#include <asm/sci.h>
+#include <asm/rtc.h>
+
+#define INTC_ICR1	0xA4140010UL
+#define INTC_ICR_IRLM   0x4000
+#define INTC_ICR_IRQ	(~INTC_ICR_IRLM)
+
+static struct resource rtc_resources[] = {
+	[0] = {
+		.start	= 0xa413fec0,
+		.end	= 0xa413fec0 + 0x28 - 1,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		/* Period IRQ */
+		.start	= 21,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* Carry IRQ */
+		.start	= 22,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		/* Alarm IRQ */
+		.start	= 20,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_rtc_platform_info rtc_info = {
+	.capabilities	= RTC_CAP_4_DIGIT_YEAR,
+};
+
+static struct platform_device rtc_device = {
+	.name		= "sh-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+	.dev		= {
+		.platform_data = &rtc_info,
+	},
+};
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xa4430000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 80, 80, 80, 80 },
+	}, {
+		.mapbase	= 0xa4438000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs           = { 81, 81, 81, 81 },
+	}, {
+
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct platform_device *sh7720_devices[] __initdata = {
+	&rtc_device,
+	&sci_device,
+};
+
+static int __init sh7720_devices_setup(void)
+{
+	return platform_add_devices(sh7720_devices,
+				    ARRAY_SIZE(sh7720_devices));
+}
+__initcall(sh7720_devices_setup);
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	TMU0, TMU1, TMU2, RTC_ATI, RTC_PRI, RTC_CUI,
+	WDT, REF_RCMI, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND,
+	IRQ0, IRQ1, IRQ2, IRQ3,
+	USBF_SPD, TMU_SUNI, IRQ5, IRQ4,
+	DMAC1_DEI0, DMAC1_DEI1, DMAC1_DEI2, DMAC1_DEI3, LCDC, SSL,
+	ADC, DMAC2_DEI4, DMAC2_DEI5, USBFI0, USBFI1, CMT,
+	SCIF0, SCIF1,
+	PINT07, PINT815, TPU0, TPU1, TPU2, TPU3, IIC,
+	SIOF0, SIOF1, MMCI0, MMCI1, MMCI2, MMCI3, PCC,
+	USBHI, AFEIF,
+	H_UDI,
+	/* interrupt groups */
+	TMU, RTC, SIM, DMAC1, USBFI, DMAC2, USB, TPU, MMC,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(TMU0, 0x400),       INTC_VECT(TMU1, 0x420),
+	INTC_VECT(TMU2, 0x440),       INTC_VECT(RTC_ATI, 0x480),
+	INTC_VECT(RTC_PRI, 0x4a0),    INTC_VECT(RTC_CUI, 0x4c0),
+	INTC_VECT(SIM_ERI, 0x4e0),    INTC_VECT(SIM_RXI, 0x500),
+	INTC_VECT(SIM_TXI, 0x520),    INTC_VECT(SIM_TEND, 0x540),
+	INTC_VECT(WDT, 0x560),        INTC_VECT(REF_RCMI, 0x580),
+	/* H_UDI cannot be masked */  INTC_VECT(TMU_SUNI, 0x6c0),
+	INTC_VECT(USBF_SPD, 0x6e0),   INTC_VECT(DMAC1_DEI0, 0x800),
+	INTC_VECT(DMAC1_DEI1, 0x820), INTC_VECT(DMAC1_DEI2, 0x840),
+	INTC_VECT(DMAC1_DEI3, 0x860), INTC_VECT(LCDC, 0x900),
+	INTC_VECT(SSL, 0x980),        INTC_VECT(USBFI0, 0xa20),
+	INTC_VECT(USBFI1, 0xa40),     INTC_VECT(USBHI, 0xa60),
+	INTC_VECT(DMAC2_DEI4, 0xb80), INTC_VECT(DMAC2_DEI5, 0xba0),
+	INTC_VECT(ADC, 0xbe0),        INTC_VECT(SCIF0, 0xc00),
+	INTC_VECT(SCIF1, 0xc20),      INTC_VECT(PINT07, 0xc80),
+	INTC_VECT(PINT815, 0xca0),    INTC_VECT(SIOF0, 0xd00),
+	INTC_VECT(SIOF1, 0xd20),      INTC_VECT(TPU0, 0xd80),
+	INTC_VECT(TPU1, 0xda0),       INTC_VECT(TPU2, 0xdc0),
+	INTC_VECT(TPU3, 0xde0),       INTC_VECT(IIC, 0xe00),
+	INTC_VECT(MMCI0, 0xe80),      INTC_VECT(MMCI1, 0xea0),
+	INTC_VECT(MMCI2, 0xec0),      INTC_VECT(MMCI3, 0xee0),
+	INTC_VECT(CMT, 0xf00),        INTC_VECT(PCC, 0xf60),
+	INTC_VECT(AFEIF, 0xfe0),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(TMU, TMU0, TMU1, TMU2),
+	INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
+	INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND),
+	INTC_GROUP(DMAC1, DMAC1_DEI0, DMAC1_DEI1, DMAC1_DEI2, DMAC1_DEI3),
+	INTC_GROUP(USBFI, USBFI0, USBFI1),
+	INTC_GROUP(DMAC2, DMAC2_DEI4, DMAC2_DEI5),
+	INTC_GROUP(TPU, TPU0, TPU1, TPU2, TPU3),
+	INTC_GROUP(MMC, MMCI0, MMCI1, MMCI2, MMCI3),
+};
+
+static struct intc_prio priorities[] __initdata = {
+	INTC_PRIO(SCIF0, 2),
+	INTC_PRIO(SCIF1, 2),
+	INTC_PRIO(DMAC1, 1),
+	INTC_PRIO(DMAC2, 1),
+	INTC_PRIO(RTC, 2),
+	INTC_PRIO(TMU, 2),
+	INTC_PRIO(TPU, 2),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xA414FEE2UL, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
+	{ 0xA414FEE4UL, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, SIM, 0 } },
+	{ 0xA4140016UL, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
+	{ 0xA4140018UL, 0, 16, 4, /* IPRD */ { USBF_SPD, TMU_SUNI, IRQ5, IRQ4 } },
+	{ 0xA414001AUL, 0, 16, 4, /* IPRE */ { DMAC1, 0, LCDC, SSL } },
+	{ 0xA4080000UL, 0, 16, 4, /* IPRF */ { ADC, DMAC2, USBFI, CMT } },
+	{ 0xA4080002UL, 0, 16, 4, /* IPRG */ { SCIF0, SCIF1, 0, 0 } },
+	{ 0xA4080004UL, 0, 16, 4, /* IPRH */ { PINT07, PINT815, TPU, IIC } },
+	{ 0xA4080006UL, 0, 16, 4, /* IPRI */ { SIOF0, SIOF1, MMC, PCC } },
+	{ 0xA4080008UL, 0, 16, 4, /* IPRJ */ { 0, USBHI, 0, AFEIF } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7720", vectors, groups,
+		priorities, NULL, prio_registers, NULL);
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+	{ INTC_ICR1, 16, 2, { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } },
+};
+
+static struct intc_vect vectors_irq[] __initdata = {
+	INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
+	INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
+	INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+};
+
+static DECLARE_INTC_DESC(intc_irq_desc, "sh7720-irq", vectors_irq,
+		NULL, priorities, NULL, prio_registers, sense_registers);
+
+void __init plat_irq_setup_pins(int mode)
+{
+	switch (mode) {
+	case IRQ_MODE_IRQ:
+		ctrl_outw(ctrl_inw(INTC_ICR1) & INTC_ICR_IRQ, INTC_ICR1);
+		register_intc_controller(&intc_irq_desc);
+		break;
+	default:
+		BUG();
+	}
+}
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+}

arch/sh/kernel/early_printk.c

@@ -13,6 +13,7 @@
 #include <linux/tty.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/delay.h>
 
 #ifdef CONFIG_SH_STANDARD_BIOS
 #include <asm/sh_bios.h>
@@ -62,6 +63,18 @@ static struct console bios_console = {
 #include <linux/serial_core.h>
 #include "../../../drivers/serial/sh-sci.h"
 
+#if defined(CONFIG_CPU_SUBTYPE_SH7720)
+#define EPK_SCSMR_VALUE 0x000
+#define EPK_SCBRR_VALUE 0x00C
+#define EPK_FIFO_SIZE 64
+#define EPK_FIFO_BITS (0x7f00 >> 8)
+#else
+#define EPK_FIFO_SIZE 16
+#define EPK_FIFO_BITS (0x1f00 >> 8)
+#endif
+
+
+
 static struct uart_port scif_port = {
 	.mapbase	= CONFIG_EARLY_SCIF_CONSOLE_PORT,
 	.membase	= (char __iomem *)CONFIG_EARLY_SCIF_CONSOLE_PORT,
@@ -69,7 +82,7 @@ static struct uart_port scif_port = {
 
 static void scif_sercon_putc(int c)
 {
-	while (((sci_in(&scif_port, SCFDR) & 0x1f00 >> 8) == 16))
+	while (((sci_in(&scif_port, SCFDR) & EPK_FIFO_BITS) >= EPK_FIFO_SIZE))
 		;
 
 	sci_out(&scif_port, SCxTDR, c);
@@ -105,7 +118,22 @@ static struct console scif_console = {
 	.index		= -1,
 };
 
-#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS)
+#if !defined(CONFIG_SH_STANDARD_BIOS)
+#if defined(CONFIG_CPU_SUBTYPE_SH7720)
+static void scif_sercon_init(char *s)
+{
+	sci_out(&scif_port, SCSCR, 0x0000);	/* clear TE and RE */
+	sci_out(&scif_port, SCFCR, 0x4006);	/* reset */
+	sci_out(&scif_port, SCSCR, 0x0000);	/* select internal clock */
+	sci_out(&scif_port, SCSMR, EPK_SCSMR_VALUE);
+	sci_out(&scif_port, SCBRR, EPK_SCBRR_VALUE);
+
+	mdelay(1);	/* wait 1-bit time */
+
+	sci_out(&scif_port, SCFCR, 0x0030);	/* TTRG=b'11 */
+	sci_out(&scif_port, SCSCR, 0x0030);	/* TE, RE */
+}
+#elif defined(CONFIG_CPU_SH4)
 #define DEFAULT_BAUD 115200
 /*
  * Simple SCIF init, primarily aimed at SH7750 and other similar SH-4
@@ -146,7 +174,8 @@ static void scif_sercon_init(char *s)
 	ctrl_outw(0, scif_port.mapbase + 36);
 	ctrl_outw(0x30, scif_port.mapbase + 8);
 }
-#endif /* CONFIG_CPU_SH4 && !CONFIG_SH_STANDARD_BIOS */
+#endif /* defined(CONFIG_CPU_SUBTYPE_SH7720) */
+#endif /* !defined(CONFIG_SH_STANDARD_BIOS) */
 #endif /* CONFIG_EARLY_SCIF_CONSOLE */
 
 /*
@@ -186,7 +215,8 @@ int __init setup_early_printk(char *buf)
 	if (!strncmp(buf, "serial", 6)) {
 		early_console = &scif_console;
 
-#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS)
+#if (defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SUBTYPE_SH7720)) && \
+    !defined(CONFIG_SH_STANDARD_BIOS)
 		scif_sercon_init(buf + 6);
 #endif
 	}

arch/sh/kernel/setup.c

@@ -279,7 +279,7 @@ static const char *cpu_name[] = {
 	[CPU_SH7705]	= "SH7705",	[CPU_SH7706]	= "SH7706",
 	[CPU_SH7707]	= "SH7707",	[CPU_SH7708]	= "SH7708",
 	[CPU_SH7709]	= "SH7709",	[CPU_SH7710]	= "SH7710",
-	[CPU_SH7712]	= "SH7712",
+	[CPU_SH7712]	= "SH7712",	[CPU_SH7720]	= "SH7720",
 	[CPU_SH7729]	= "SH7729",	[CPU_SH7750]	= "SH7750",
 	[CPU_SH7750S]	= "SH7750S",	[CPU_SH7750R]	= "SH7750R",
 	[CPU_SH7751]	= "SH7751",	[CPU_SH7751R]	= "SH7751R",

arch/sh/kernel/timers/timer-tmu.c

@@ -173,7 +173,8 @@ static int tmu_timer_init(void)
 
 	tmu_timer_stop();
 
-#if !defined(CONFIG_CPU_SUBTYPE_SH7760) && \
+#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && \
+    !defined(CONFIG_CPU_SUBTYPE_SH7760) && \
     !defined(CONFIG_CPU_SUBTYPE_SH7785) && \
     !defined(CONFIG_CPU_SUBTYPE_SHX3)
 	ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);

arch/sh/mm/Kconfig

@@ -111,6 +111,14 @@ config CPU_SUBTYPE_SH7712
 	help
 	  Select SH7712 if you have a SH3-DSP SH7712 CPU.
 
+config CPU_SUBTYPE_SH7720
+	bool "Support SH7720 processor"
+	select CPU_SH3
+	select CPU_HAS_INTC_IRQ
+	select CPU_HAS_DSP
+	help
+	  Select SH7720 if you have a SH3-DSP SH7720 CPU.
+
 # SH-4 Processor Support
 
 config CPU_SUBTYPE_SH7750

drivers/serial/sh-sci.c

@@ -4,6 +4,7 @@
  * SuperH on-chip serial module support.  (SCI with no FIFO / with FIFO)
  *
  *  Copyright (C) 2002 - 2006  Paul Mundt
+ *  Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007).
  *
  * based off of the old drivers/char/sh-sci.c by:
  *
@@ -301,6 +302,38 @@ static void sci_init_pins_scif(struct uart_port* port, unsigned int cflag)
 	}
 	sci_out(port, SCFCR, fcr_val);
 }
+#elif defined(CONFIG_CPU_SUBTYPE_SH7720)
+static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+{
+	unsigned int fcr_val = 0;
+	unsigned short data;
+
+	if (cflag & CRTSCTS) {
+		/* enable RTS/CTS */
+		if (port->mapbase == 0xa4430000) { /* SCIF0 */
+			/* Clear PTCR bit 9-2; enable all scif pins but sck */
+			data = ctrl_inw(PORT_PTCR);
+			ctrl_outw((data & 0xfc03), PORT_PTCR);
+		} else if (port->mapbase == 0xa4438000) { /* SCIF1 */
+			/* Clear PVCR bit 9-2 */
+			data = ctrl_inw(PORT_PVCR);
+			ctrl_outw((data & 0xfc03), PORT_PVCR);
+		}
+		fcr_val |= SCFCR_MCE;
+	} else {
+		if (port->mapbase == 0xa4430000) { /* SCIF0 */
+			/* Clear PTCR bit 5-2; enable only tx and rx  */
+			data = ctrl_inw(PORT_PTCR);
+			ctrl_outw((data & 0xffc3), PORT_PTCR);
+		} else if (port->mapbase == 0xa4438000) { /* SCIF1 */
+			/* Clear PVCR bit 5-2 */
+			data = ctrl_inw(PORT_PVCR);
+			ctrl_outw((data & 0xffc3), PORT_PVCR);
+		}
+	}
+	sci_out(port, SCFCR, fcr_val);
+}
+
 #elif defined(CONFIG_CPU_SH3)
 /* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */
 static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)

drivers/serial/sh-sci.h

@@ -10,19 +10,19 @@
  *  Modified to support SH7300(SH-Mobile) SCIF. Takashi Kusuda (Jun 2003).
  *  Modified to support H8/300 Series Yoshinori Sato (Feb 2004).
  *  Removed SH7300 support (Jul 2007).
+ *  Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Aug 2007).
  */
 #include <linux/serial_core.h>
 #include <asm/io.h>
 
-#if defined(__H8300H__) || defined(__H8300S__)
 #include <asm/gpio.h>
+
 #if defined(CONFIG_H83007) || defined(CONFIG_H83068)
 #include <asm/regs306x.h>
 #endif
 #if defined(CONFIG_H8S2678)
 #include <asm/regs267x.h>
 #endif
-#endif
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
     defined(CONFIG_CPU_SUBTYPE_SH7707) || \
@@ -46,6 +46,10 @@
  */
 # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
 # define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH7720)
+# define SCSCR_INIT(port)  0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
+# define SCIF_ONLY
+#define SCIF_ORER    0x0200   /* overrun error bit */
 #elif defined(CONFIG_SH_RTS7751R2D)
 # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
@@ -217,7 +221,8 @@
 #define SCIF_RDF   0x0002 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
 #define SCIF_DR    0x0001 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7720)
 #define SCIF_ORER    0x0200
 #define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
 #define SCIF_RFDC_MASK 0x007f
@@ -254,7 +259,8 @@
 # define SCxSR_FER(port)		SCIF_FER
 # define SCxSR_PER(port)		SCIF_PER
 # define SCxSR_BRK(port)		SCIF_BRK
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7720)
 # define SCxSR_RDxF_CLEAR(port)         (sci_in(port,SCxSR)&0xfffc)
 # define SCxSR_ERROR_CLEAR(port)        (sci_in(port,SCxSR)&0xfd73)
 # define SCxSR_TDxE_CLEAR(port)         (sci_in(port,SCxSR)&0xffdf)
@@ -362,7 +368,8 @@
   CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size)
 #define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \
 	  CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7720)
 #define SCIF_FNS(name, scif_offset, scif_size) \
   CPU_SCIF_FNS(name, scif_offset, scif_size)
 #else
@@ -388,7 +395,8 @@
   CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
 #endif
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7720)
 
 SCIF_FNS(SCSMR,  0x00, 16)
 SCIF_FNS(SCBRR,  0x04,  8)
@@ -510,7 +518,15 @@ static inline void set_sh771x_scif_pfc(struct uart_port *port)
 		return;
 	}
 }
-
+#elif defined(CONFIG_CPU_SUBTYPE_SH7720)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+	if (port->mapbase == 0xa4430000)
+		return sci_in(port, SCxSR) & 0x0003 ? 1 : 0;
+	else if (port->mapbase == 0xa4438000)
+		return sci_in(port, SCxSR) & 0x0003 ? 1 : 0;
+	return 1;
+}
 #elif defined(CONFIG_CPU_SUBTYPE_SH7750)  || \
       defined(CONFIG_CPU_SUBTYPE_SH7751)  || \
       defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
@@ -692,7 +708,8 @@ static inline int sci_rxd_in(struct uart_port *port)
 #if defined(CONFIG_CPU_SUBTYPE_SH7780) || \
     defined(CONFIG_CPU_SUBTYPE_SH7785)
 #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7720)
 #define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
 #elif defined(__H8300H__) || defined(__H8300S__)
 #define SCBRR_VALUE(bps) (((CONFIG_CPU_CLOCK*1000/32)/bps)-1)

include/asm-sh/cpu-sh3/cache.h

@@ -26,7 +26,9 @@
 #define CCR_CACHE_ENABLE	CCR_CACHE_CE
 #define CCR_CACHE_INVALIDATE	CCR_CACHE_CF
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7705) || defined(CONFIG_CPU_SUBTYPE_SH7710)
+#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7710) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7720)
 #define CCR3	0xa40000b4
 #define CCR_CACHE_16KB  0x00010000
 #define CCR_CACHE_32KB	0x00020000

include/asm-sh/cpu-sh3/dma.h

 #ifndef __ASM_CPU_SH3_DMA_H
 #define __ASM_CPU_SH3_DMA_H
 
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7720)
+#define SH_DMAC_BASE	0xa4010020
+
+#define DMTE0_IRQ	48
+#define DMTE1_IRQ	49
+#define DMTE2_IRQ	50
+#define DMTE3_IRQ	51
+#define DMTE4_IRQ	76
+#define DMTE5_IRQ	77
+
+#else
 #define SH_DMAC_BASE	0xa4000020
+#endif
 
 /* Definitions for the SuperH DMAC */
 #define TM_BURST	0x00000020

include/asm-sh/cpu-sh3/mmu_context.h

@@ -27,12 +27,13 @@
 #define TRA	0xffffffd0
 #define EXPEVT	0xffffffd4
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7706) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7710) || \
     defined(CONFIG_CPU_SUBTYPE_SH7712) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7710)
+    defined(CONFIG_CPU_SUBTYPE_SH7720)
 #define INTEVT	0xa4000000	/* INTEVTE2(0xa4000000) */
 #else
 #define INTEVT	0xffffffd8

include/asm-sh/cpu-sh3/timer.h

@@ -23,11 +23,13 @@
  * ---------------------------------------------------------------------------
  */
 
-#if !defined(CONFIG_CPU_SUBTYPE_SH7727)
+#if  !defined(CONFIG_CPU_SUBTYPE_SH7720) && \
+     !defined(CONFIG_CPU_SUBTYPE_SH7727)
 #define TMU_TOCR	0xfffffe90	/* Byte access */
 #endif
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7710)
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7720)
 #define TMU_012_TSTR	0xa412fe92	/* Byte access */
 
 #define TMU0_TCOR	0xa412fe94	/* Long access */
@@ -56,7 +58,8 @@
 #define TMU2_TCOR	0xfffffeac	/* Long access */
 #define TMU2_TCNT	0xfffffeb0	/* Long access */
 #define TMU2_TCR	0xfffffeb4	/* Word access */
-#if !defined(CONFIG_CPU_SUBTYPE_SH7727)
+#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && \
+    !defined(CONFIG_CPU_SUBTYPE_SH7727)
 #define TMU2_TCPR2	0xfffffeb8	/* Long access */
 #endif
 #endif

include/asm-sh/cpu-sh3/ubc.h

@@ -11,7 +11,8 @@
 #ifndef __ASM_CPU_SH3_UBC_H
 #define __ASM_CPU_SH3_UBC_H
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7710)
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7720)
 #define UBC_BARA		0xa4ffffb0
 #define UBC_BAMRA		0xa4ffffb4
 #define UBC_BBRA		0xa4ffffb8

include/asm-sh/processor.h

@@ -45,7 +45,7 @@ enum cpu_type {
 	CPU_SH7705, CPU_SH7706, CPU_SH7707,
 	CPU_SH7708, CPU_SH7708S, CPU_SH7708R,
 	CPU_SH7709, CPU_SH7709A, CPU_SH7710, CPU_SH7712,
-	CPU_SH7729,
+	CPU_SH7720, CPU_SH7729,
 
 	/* SH-4 types */
 	CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R,