提交 3d6437b3 编写于 作者: M Mike Frysinger

Blackfin: punt short SPI MMR bit names

Now that the common header defines everything and the SPI drivers are
using it, we can drop these duplicated global namespace polluters.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
上级 d4429f60
......@@ -748,51 +748,6 @@
#define FFE 0x20 /* Force Framing Error On Transmit */
/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS ****************************/
/* SPI_CTL Masks */
#define TIMOD 0x0003 /* Transfer Initiate Mode */
#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */
#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */
#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */
#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */
#define SZ 0x0004 /* Send Zero (When TDBR Empty, Send Zero/Last*) */
#define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard*) */
#define PSSE 0x0010 /* Slave-Select Input Enable */
#define EMISO 0x0020 /* Enable MISO As Output */
#define SIZE 0x0100 /* Size of Words (16/8* Bits) */
#define LSBF 0x0200 /* LSB First */
#define CPHA 0x0400 /* Clock Phase */
#define CPOL 0x0800 /* Clock Polarity */
#define MSTR 0x1000 /* Master/Slave* */
#define WOM 0x2000 /* Write Open Drain Master */
#define SPE 0x4000 /* SPI Enable */
/* SPI_FLG Masks */
#define FLS1 0x0002 /* Enables SPI_FLOUT1 as SPI Slave-Select Output */
#define FLS2 0x0004 /* Enables SPI_FLOUT2 as SPI Slave-Select Output */
#define FLS3 0x0008 /* Enables SPI_FLOUT3 as SPI Slave-Select Output */
#define FLS4 0x0010 /* Enables SPI_FLOUT4 as SPI Slave-Select Output */
#define FLS5 0x0020 /* Enables SPI_FLOUT5 as SPI Slave-Select Output */
#define FLS6 0x0040 /* Enables SPI_FLOUT6 as SPI Slave-Select Output */
#define FLS7 0x0080 /* Enables SPI_FLOUT7 as SPI Slave-Select Output */
#define FLG1 0xFDFF /* Activates SPI_FLOUT1 */
#define FLG2 0xFBFF /* Activates SPI_FLOUT2 */
#define FLG3 0xF7FF /* Activates SPI_FLOUT3 */
#define FLG4 0xEFFF /* Activates SPI_FLOUT4 */
#define FLG5 0xDFFF /* Activates SPI_FLOUT5 */
#define FLG6 0xBFFF /* Activates SPI_FLOUT6 */
#define FLG7 0x7FFF /* Activates SPI_FLOUT7 */
/* SPI_STAT Masks */
#define SPIF 0x0001 /* SPI Finished (Single-Word Transfer Complete) */
#define MODF 0x0002 /* Mode Fault Error (Another Device Tried To Become Master) */
#define TXE 0x0004 /* Transmission Error (Data Sent With No New Data In TDBR) */
#define TXS 0x0008 /* SPI_TDBR Data Buffer Status (Full/Empty*) */
#define RBSY 0x0010 /* Receive Error (Data Received With RDBR Full) */
#define RXS 0x0020 /* SPI_RDBR Data Buffer Status (Full/Empty*) */
#define TXCOL 0x0040 /* Transmit Collision Error (Corrupt Data May Have Been Sent) */
/* **************** GENERAL PURPOSE TIMER MASKS **********************/
/* TIMER_ENABLE Masks */
#define TIMEN0 0x0001 /* Enable Timer 0 */
......
......@@ -749,51 +749,6 @@
#define FFE 0x20 /* Force Framing Error On Transmit */
/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS ****************************/
/* SPI_CTL Masks */
#define TIMOD 0x0003 /* Transfer Initiate Mode */
#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */
#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */
#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */
#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */
#define SZ 0x0004 /* Send Zero (When TDBR Empty, Send Zero/Last*) */
#define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard*) */
#define PSSE 0x0010 /* Slave-Select Input Enable */
#define EMISO 0x0020 /* Enable MISO As Output */
#define SIZE 0x0100 /* Size of Words (16/8* Bits) */
#define LSBF 0x0200 /* LSB First */
#define CPHA 0x0400 /* Clock Phase */
#define CPOL 0x0800 /* Clock Polarity */
#define MSTR 0x1000 /* Master/Slave* */
#define WOM 0x2000 /* Write Open Drain Master */
#define SPE 0x4000 /* SPI Enable */
/* SPI_FLG Masks */
#define FLS1 0x0002 /* Enables SPI_FLOUT1 as SPI Slave-Select Output */
#define FLS2 0x0004 /* Enables SPI_FLOUT2 as SPI Slave-Select Output */
#define FLS3 0x0008 /* Enables SPI_FLOUT3 as SPI Slave-Select Output */
#define FLS4 0x0010 /* Enables SPI_FLOUT4 as SPI Slave-Select Output */
#define FLS5 0x0020 /* Enables SPI_FLOUT5 as SPI Slave-Select Output */
#define FLS6 0x0040 /* Enables SPI_FLOUT6 as SPI Slave-Select Output */
#define FLS7 0x0080 /* Enables SPI_FLOUT7 as SPI Slave-Select Output */
#define FLG1 0xFDFF /* Activates SPI_FLOUT1 */
#define FLG2 0xFBFF /* Activates SPI_FLOUT2 */
#define FLG3 0xF7FF /* Activates SPI_FLOUT3 */
#define FLG4 0xEFFF /* Activates SPI_FLOUT4 */
#define FLG5 0xDFFF /* Activates SPI_FLOUT5 */
#define FLG6 0xBFFF /* Activates SPI_FLOUT6 */
#define FLG7 0x7FFF /* Activates SPI_FLOUT7 */
/* SPI_STAT Masks */
#define SPIF 0x0001 /* SPI Finished (Single-Word Transfer Complete) */
#define MODF 0x0002 /* Mode Fault Error (Another Device Tried To Become Master) */
#define TXE 0x0004 /* Transmission Error (Data Sent With No New Data In TDBR) */
#define TXS 0x0008 /* SPI_TDBR Data Buffer Status (Full/Empty*) */
#define RBSY 0x0010 /* Receive Error (Data Received With RDBR Full) */
#define RXS 0x0020 /* SPI_RDBR Data Buffer Status (Full/Empty*) */
#define TXCOL 0x0040 /* Transmit Collision Error (Corrupt Data May Have Been Sent) */
/* **************** GENERAL PURPOSE TIMER MASKS **********************/
/* TIMER_ENABLE Masks */
#define TIMEN0 0x0001 /* Enable Timer 0 */
......
......@@ -681,76 +681,6 @@
#define PF14_P 14
#define PF15_P 15
/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS **************** */
/* SPI_CTL Masks */
#define TIMOD 0x00000003 /* Transfer initiation mode and interrupt generation */
#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */
#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */
#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */
#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */
#define SZ 0x00000004 /* Send Zero (=0) or last (=1) word when TDBR empty. */
#define GM 0x00000008 /* When RDBR full, get more (=1) data or discard (=0) incoming Data */
#define PSSE 0x00000010 /* Enable (=1) Slave-Select input for Master. */
#define EMISO 0x00000020 /* Enable (=1) MISO pin as an output. */
#define SIZE 0x00000100 /* Word length (0 => 8 bits, 1 => 16 bits) */
#define LSBF 0x00000200 /* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */
#define CPHA 0x00000400 /* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */
#define CPOL 0x00000800 /* Clock polarity (0 => active-high, 1 => active-low) */
#define MSTR 0x00001000 /* Configures SPI as master (=1) or slave (=0) */
#define WOM 0x00002000 /* Open drain (=1) data output enable (for MOSI and MISO) */
#define SPE 0x00004000 /* SPI module enable (=1), disable (=0) */
/* SPI_FLG Masks */
#define FLS1 0x00000002 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
#define FLS2 0x00000004 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLS3 0x00000008 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
#define FLS4 0x00000010 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
#define FLS5 0x00000020 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
#define FLS6 0x00000040 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
#define FLS7 0x00000080 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
#define FLG1 0x00000200 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */
#define FLG2 0x00000400 /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLG3 0x00000800 /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */
#define FLG4 0x00001000 /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */
#define FLG5 0x00002000 /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */
#define FLG6 0x00004000 /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */
#define FLG7 0x00008000 /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
/* SPI_FLG Bit Positions */
#define FLS1_P 0x00000001 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
#define FLS2_P 0x00000002 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLS3_P 0x00000003 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
#define FLS4_P 0x00000004 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
#define FLS5_P 0x00000005 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
#define FLS6_P 0x00000006 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
#define FLS7_P 0x00000007 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
#define FLG1_P 0x00000009 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */
#define FLG2_P 0x0000000A /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLG3_P 0x0000000B /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */
#define FLG4_P 0x0000000C /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */
#define FLG5_P 0x0000000D /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */
#define FLG6_P 0x0000000E /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */
#define FLG7_P 0x0000000F /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
/* SPI_STAT Masks */
#define SPIF 0x00000001 /* Set (=1) when SPI single-word transfer complete */
#define MODF 0x00000002 /* Set (=1) in a master device when some other device tries to become master */
#define TXE 0x00000004 /* Set (=1) when transmission occurs with no new data in SPI_TDBR */
#define TXS 0x00000008 /* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */
#define RBSY 0x00000010 /* Set (=1) when data is received with RDBR full */
#define RXS 0x00000020 /* SPI_RDBR Data Buffer Status (0=Empty, 1=Full) */
#define TXCOL 0x00000040 /* When set (=1), corrupt data may have been transmitted */
/* SPIx_FLG Masks */
#define FLG1E 0xFDFF /* Activates SPI_FLOUT1 */
#define FLG2E 0xFBFF /* Activates SPI_FLOUT2 */
#define FLG3E 0xF7FF /* Activates SPI_FLOUT3 */
#define FLG4E 0xEFFF /* Activates SPI_FLOUT4 */
#define FLG5E 0xDFFF /* Activates SPI_FLOUT5 */
#define FLG6E 0xBFFF /* Activates SPI_FLOUT6 */
#define FLG7E 0x7FFF /* Activates SPI_FLOUT7 */
/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS ************* */
/* AMGCTL Masks */
......
......@@ -1071,50 +1071,6 @@
#define FPE 0x10 /* Force Parity Error On Transmit */
#define FFE 0x20 /* Force Framing Error On Transmit */
/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS ****************************/
/* SPI_CTL Masks */
#define TIMOD 0x0003 /* Transfer Initiate Mode */
#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */
#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */
#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */
#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */
#define SZ 0x0004 /* Send Zero (When TDBR Empty, Send Zero/Last*) */
#define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard*) */
#define PSSE 0x0010 /* Slave-Select Input Enable */
#define EMISO 0x0020 /* Enable MISO As Output */
#define SIZE 0x0100 /* Size of Words (16/8* Bits) */
#define LSBF 0x0200 /* LSB First */
#define CPHA 0x0400 /* Clock Phase */
#define CPOL 0x0800 /* Clock Polarity */
#define MSTR 0x1000 /* Master/Slave* */
#define WOM 0x2000 /* Write Open Drain Master */
#define SPE 0x4000 /* SPI Enable */
/* SPI_FLG Masks */
#define FLS1 0x0002 /* Enables SPI_FLOUT1 as SPI Slave-Select Output */
#define FLS2 0x0004 /* Enables SPI_FLOUT2 as SPI Slave-Select Output */
#define FLS3 0x0008 /* Enables SPI_FLOUT3 as SPI Slave-Select Output */
#define FLS4 0x0010 /* Enables SPI_FLOUT4 as SPI Slave-Select Output */
#define FLS5 0x0020 /* Enables SPI_FLOUT5 as SPI Slave-Select Output */
#define FLS6 0x0040 /* Enables SPI_FLOUT6 as SPI Slave-Select Output */
#define FLS7 0x0080 /* Enables SPI_FLOUT7 as SPI Slave-Select Output */
#define FLG1 0xFDFF /* Activates SPI_FLOUT1 */
#define FLG2 0xFBFF /* Activates SPI_FLOUT2 */
#define FLG3 0xF7FF /* Activates SPI_FLOUT3 */
#define FLG4 0xEFFF /* Activates SPI_FLOUT4 */
#define FLG5 0xDFFF /* Activates SPI_FLOUT5 */
#define FLG6 0xBFFF /* Activates SPI_FLOUT6 */
#define FLG7 0x7FFF /* Activates SPI_FLOUT7 */
/* SPI_STAT Masks */
#define SPIF 0x0001 /* SPI Finished (Single-Word Transfer Complete) */
#define MODF 0x0002 /* Mode Fault Error (Another Device Tried To Become Master) */
#define TXE 0x0004 /* Transmission Error (Data Sent With No New Data In TDBR) */
#define TXS 0x0008 /* SPI_TDBR Data Buffer Status (Full/Empty*) */
#define RBSY 0x0010 /* Receive Error (Data Received With RDBR Full) */
#define RXS 0x0020 /* SPI_RDBR Data Buffer Status (Full/Empty*) */
#define TXCOL 0x0040 /* Transmit Collision Error (Corrupt Data May Have Been Sent) */
/* **************** GENERAL PURPOSE TIMER MASKS **********************/
/* TIMER_ENABLE Masks */
#define TIMEN0 0x0001 /* Enable Timer 0 */
......
......@@ -1894,78 +1894,6 @@
#define PE14_P 0xE
#define PE15_P 0xF
/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS **************** */
/* SPIx_CTL Masks */
#define TIMOD 0x0003 /* Transfer Initiate Mode */
#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */
#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */
#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */
#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */
#define SZ 0x0004 /* Send Zero (When TDBR Empty, Send Zero/Last*) */
#define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard*) */
#define PSSE 0x0010 /* Slave-Select Input Enable */
#define EMISO 0x0020 /* Enable MISO As Output */
#define SIZE 0x0100 /* Size of Words (16/8* Bits) */
#define LSBF 0x0200 /* LSB First */
#define CPHA 0x0400 /* Clock Phase */
#define CPOL 0x0800 /* Clock Polarity */
#define MSTR 0x1000 /* Master/Slave* */
#define WOM 0x2000 /* Write Open Drain Master */
#define SPE 0x4000 /* SPI Enable */
/* SPIx_FLG Masks */
#define FLS1 0x0002 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
#define FLS2 0x0004 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLS3 0x0008 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
#define FLS4 0x0010 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
#define FLS5 0x0020 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
#define FLS6 0x0040 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
#define FLS7 0x0080 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
#define FLG1 0x0200 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */
#define FLG2 0x0400 /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLG3 0x0800 /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */
#define FLG4 0x1000 /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */
#define FLG5 0x2000 /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */
#define FLG6 0x4000 /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */
#define FLG7 0x8000 /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
/* SPIx_FLG Bit Positions */
#define FLS1_P 0x0001 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
#define FLS2_P 0x0002 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLS3_P 0x0003 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
#define FLS4_P 0x0004 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
#define FLS5_P 0x0005 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
#define FLS6_P 0x0006 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
#define FLS7_P 0x0007 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
#define FLG1_P 0x0009 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */
#define FLG2_P 0x000A /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLG3_P 0x000B /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */
#define FLG4_P 0x000C /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */
#define FLG5_P 0x000D /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */
#define FLG6_P 0x000E /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */
#define FLG7_P 0x000F /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
/* SPIx_STAT Masks */
#define SPIF 0x0001 /* Set (=1) when SPI single-word transfer complete */
#define MODF 0x0002 /* Set (=1) in a master device when some other device tries to become master */
#define TXE 0x0004 /* Set (=1) when transmission occurs with no new data in SPI_TDBR */
#define TXS 0x0008 /* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */
#define RBSY 0x0010 /* Set (=1) when data is received with RDBR full */
#define RXS 0x0020 /* SPI_RDBR Data Buffer Status (0=Empty, 1=Full) */
#define TXCOL 0x0040 /* When set (=1), corrupt data may have been transmitted */
/* SPIx_FLG Masks */
#define FLG1E 0xFDFF /* Activates SPI_FLOUT1 */
#define FLG2E 0xFBFF /* Activates SPI_FLOUT2 */
#define FLG3E 0xF7FF /* Activates SPI_FLOUT3 */
#define FLG4E 0xEFFF /* Activates SPI_FLOUT4 */
#define FLG5E 0xDFFF /* Activates SPI_FLOUT5 */
#define FLG6E 0xBFFF /* Activates SPI_FLOUT6 */
#define FLG7E 0x7FFF /* Activates SPI_FLOUT7 */
/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS ************* */
/* EBIU_AMGCTL Masks */
#define AMCKEN 0x0001 /* Enable CLKOUT */
......
......@@ -2061,56 +2061,6 @@
#define LOW_EVEN 0xff0000 /* Lower Limit for Even Bytes (Luma) */
#define HIGH_EVEN 0xff000000 /* Upper Limit for Even Bytes (Luma) */
/* Bit masks for SPIx_BAUD */
#define SPI_BAUD 0xffff /* Baud Rate */
/* Bit masks for SPIx_CTL */
#define SPE 0x4000 /* SPI Enable */
#define WOM 0x2000 /* Write Open Drain Master */
#define MSTR 0x1000 /* Master Mode */
#define CPOL 0x800 /* Clock Polarity */
#define CPHA 0x400 /* Clock Phase */
#define LSBF 0x200 /* LSB First */
#define SIZE 0x100 /* Size of Words */
#define EMISO 0x20 /* Enable MISO Output */
#define PSSE 0x10 /* Slave-Select Enable */
#define GM 0x8 /* Get More Data */
#define SZ 0x4 /* Send Zero */
#define TIMOD 0x3 /* Transfer Initiation Mode */
/* Bit masks for SPIx_FLG */
#define FLS1 0x2 /* Slave Select Enable 1 */
#define FLS2 0x4 /* Slave Select Enable 2 */
#define FLS3 0x8 /* Slave Select Enable 3 */
#define FLG1 0x200 /* Slave Select Value 1 */
#define FLG2 0x400 /* Slave Select Value 2 */
#define FLG3 0x800 /* Slave Select Value 3 */
/* Bit masks for SPIx_STAT */
#define TXCOL 0x40 /* Transmit Collision Error */
#define RXS 0x20 /* RDBR Data Buffer Status */
#define RBSY 0x10 /* Receive Error */
#define TXS 0x8 /* TDBR Data Buffer Status */
#define TXE 0x4 /* Transmission Error */
#define MODF 0x2 /* Mode Fault Error */
#define SPIF 0x1 /* SPI Finished */
/* Bit masks for SPIx_TDBR */
#define TDBR 0xffff /* Transmit Data Buffer */
/* Bit masks for SPIx_RDBR */
#define RDBR 0xffff /* Receive Data Buffer */
/* Bit masks for SPIx_SHADOW */
#define SHADOW 0xffff /* RDBR Shadow */
/* ************************************************ */
/* The TWI bit masks fields are from the ADSP-BF538 */
/* and they have not been verified as the final */
......
......@@ -1271,63 +1271,6 @@
#define PF14_P 14
#define PF15_P 15
/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS **************** */
/* SPI_CTL Masks */
#define TIMOD 0x00000003 /* Transfer initiation mode and interrupt generation */
#define SZ 0x00000004 /* Send Zero (=0) or last (=1) word when TDBR empty. */
#define GM 0x00000008 /* When RDBR full, get more (=1) data or discard (=0) incoming Data */
#define PSSE 0x00000010 /* Enable (=1) Slave-Select input for Master. */
#define EMISO 0x00000020 /* Enable (=1) MISO pin as an output. */
#define SIZE 0x00000100 /* Word length (0 => 8 bits, 1 => 16 bits) */
#define LSBF 0x00000200 /* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */
#define CPHA 0x00000400 /* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */
#define CPOL 0x00000800 /* Clock polarity (0 => active-high, 1 => active-low) */
#define MSTR 0x00001000 /* Configures SPI as master (=1) or slave (=0) */
#define WOM 0x00002000 /* Open drain (=1) data output enable (for MOSI and MISO) */
#define SPE 0x00004000 /* SPI module enable (=1), disable (=0) */
/* SPI_FLG Masks */
#define FLS1 0x00000002 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
#define FLS2 0x00000004 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLS3 0x00000008 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
#define FLS4 0x00000010 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
#define FLS5 0x00000020 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
#define FLS6 0x00000040 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
#define FLS7 0x00000080 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
#define FLG1 0x00000200 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */
#define FLG2 0x00000400 /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLG3 0x00000800 /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */
#define FLG4 0x00001000 /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */
#define FLG5 0x00002000 /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */
#define FLG6 0x00004000 /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */
#define FLG7 0x00008000 /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
/* SPI_FLG Bit Positions */
#define FLS1_P 0x00000001 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
#define FLS2_P 0x00000002 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLS3_P 0x00000003 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
#define FLS4_P 0x00000004 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
#define FLS5_P 0x00000005 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
#define FLS6_P 0x00000006 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
#define FLS7_P 0x00000007 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
#define FLG1_P 0x00000009 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */
#define FLG2_P 0x0000000A /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLG3_P 0x0000000B /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */
#define FLG4_P 0x0000000C /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */
#define FLG5_P 0x0000000D /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */
#define FLG6_P 0x0000000E /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */
#define FLG7_P 0x0000000F /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
/* SPI_STAT Masks */
#define SPIF 0x00000001 /* Set (=1) when SPI single-word transfer complete */
#define MODF 0x00000002 /* Set (=1) in a master device when some other device tries to become master */
#define TXE 0x00000004 /* Set (=1) when transmission occurs with no new data in SPI_TDBR */
#define TXS 0x00000008 /* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */
#define RBSY 0x00000010 /* Set (=1) when data is received with RDBR full */
#define RXS 0x00000020 /* SPI_RDBR Data Buffer Status (0=Empty, 1=Full) */
#define TXCOL 0x00000040 /* When set (=1), corrupt data may have been transmitted */
/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS ************* */
/* AMGCTL Masks */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册