提交 364fdbc0 编写于 作者: A Anton Vorontsov 提交者: Linus Torvalds

spi_mpc83xx: rework chip selects handling

The main purpose of this patch is to pass 'struct spi_device' to the chip
select handling routines.  This is needed so that we could implement
full-fledged OpenFirmware support for this driver.

While at it, also:
- Replace two {de,activate}_cs routines by single cs_contol().
- Don't duplicate platform data callbacks in mpc83xx_spi struct.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 34c8a20c
......@@ -39,16 +39,10 @@
#endif
#ifdef CONFIG_QUICC_ENGINE
static void mpc83xx_spi_activate_cs(u8 cs, u8 polarity)
static void mpc83xx_spi_cs_control(struct spi_device *spi, bool on)
{
pr_debug("%s %d %d\n", __func__, cs, polarity);
par_io_data_set(3, 13, polarity);
}
static void mpc83xx_spi_deactivate_cs(u8 cs, u8 polarity)
{
pr_debug("%s %d %d\n", __func__, cs, polarity);
par_io_data_set(3, 13, !polarity);
pr_debug("%s %d %d\n", __func__, spi->chip_select, on);
par_io_data_set(3, 13, on);
}
static struct mmc_spi_platform_data mpc832x_mmc_pdata = {
......@@ -74,9 +68,7 @@ static int __init mpc832x_spi_init(void)
par_io_config_pin(3, 14, 2, 0, 0, 0); /* SD_INSERT, I */
par_io_config_pin(3, 15, 2, 0, 0, 0); /* SD_PROTECT,I */
return fsl_spi_init(&mpc832x_spi_boardinfo, 1,
mpc83xx_spi_activate_cs,
mpc83xx_spi_deactivate_cs);
return fsl_spi_init(&mpc832x_spi_boardinfo, 1, mpc83xx_spi_cs_control);
}
machine_device_initcall(mpc832x_rdb, mpc832x_spi_init);
#endif /* CONFIG_QUICC_ENGINE */
......
......@@ -420,8 +420,8 @@ arch_initcall(fsl_usb_of_init);
static int __init of_fsl_spi_probe(char *type, char *compatible, u32 sysclk,
struct spi_board_info *board_infos,
unsigned int num_board_infos,
void (*activate_cs)(u8 cs, u8 polarity),
void (*deactivate_cs)(u8 cs, u8 polarity))
void (*cs_control)(struct spi_device *dev,
bool on))
{
struct device_node *np;
unsigned int i = 0;
......@@ -433,8 +433,7 @@ static int __init of_fsl_spi_probe(char *type, char *compatible, u32 sysclk,
struct resource res[2];
struct platform_device *pdev;
struct fsl_spi_platform_data pdata = {
.activate_cs = activate_cs,
.deactivate_cs = deactivate_cs,
.cs_control = cs_control,
};
memset(res, 0, sizeof(res));
......@@ -501,8 +500,7 @@ static int __init of_fsl_spi_probe(char *type, char *compatible, u32 sysclk,
int __init fsl_spi_init(struct spi_board_info *board_infos,
unsigned int num_board_infos,
void (*activate_cs)(u8 cs, u8 polarity),
void (*deactivate_cs)(u8 cs, u8 polarity))
void (*cs_control)(struct spi_device *spi, bool on))
{
u32 sysclk = -1;
int ret;
......@@ -518,10 +516,10 @@ int __init fsl_spi_init(struct spi_board_info *board_infos,
}
ret = of_fsl_spi_probe(NULL, "fsl,spi", sysclk, board_infos,
num_board_infos, activate_cs, deactivate_cs);
num_board_infos, cs_control);
if (!ret)
of_fsl_spi_probe("spi", "fsl_spi", sysclk, board_infos,
num_board_infos, activate_cs, deactivate_cs);
num_board_infos, cs_control);
return spi_register_board_info(board_infos, num_board_infos);
}
......
......@@ -4,6 +4,8 @@
#include <asm/mmu.h>
struct spi_device;
extern phys_addr_t get_immrbase(void);
#if defined(CONFIG_CPM2) || defined(CONFIG_QUICC_ENGINE) || defined(CONFIG_8xx)
extern u32 get_brgfreq(void);
......@@ -19,8 +21,7 @@ struct device_node;
extern int fsl_spi_init(struct spi_board_info *board_infos,
unsigned int num_board_infos,
void (*activate_cs)(u8 cs, u8 polarity),
void (*deactivate_cs)(u8 cs, u8 polarity));
void (*cs_control)(struct spi_device *spi, bool on));
extern void fsl_rstcr_restart(char *cmd);
......
......@@ -89,9 +89,6 @@ struct mpc83xx_spi {
bool qe_mode;
void (*activate_cs) (u8 cs, u8 polarity);
void (*deactivate_cs) (u8 cs, u8 polarity);
u8 busy;
struct workqueue_struct *workqueue;
......@@ -153,15 +150,14 @@ MPC83XX_SPI_TX_BUF(u32)
static void mpc83xx_spi_chipselect(struct spi_device *spi, int value)
{
struct mpc83xx_spi *mpc83xx_spi;
u8 pol = spi->mode & SPI_CS_HIGH ? 1 : 0;
struct mpc83xx_spi *mpc83xx_spi = spi_master_get_devdata(spi->master);
struct fsl_spi_platform_data *pdata = spi->dev.parent->platform_data;
bool pol = spi->mode & SPI_CS_HIGH;
struct spi_mpc83xx_cs *cs = spi->controller_state;
mpc83xx_spi = spi_master_get_devdata(spi->master);
if (value == BITBANG_CS_INACTIVE) {
if (mpc83xx_spi->deactivate_cs)
mpc83xx_spi->deactivate_cs(spi->chip_select, pol);
if (pdata->cs_control)
pdata->cs_control(spi, !pol);
}
if (value == BITBANG_CS_ACTIVE) {
......@@ -186,8 +182,8 @@ static void mpc83xx_spi_chipselect(struct spi_device *spi, int value)
mpc83xx_spi_write_reg(mode, regval);
local_irq_restore(flags);
}
if (mpc83xx_spi->activate_cs)
mpc83xx_spi->activate_cs(spi->chip_select, pol);
if (pdata->cs_control)
pdata->cs_control(spi, pol);
}
}
......@@ -582,8 +578,6 @@ static int __init mpc83xx_spi_probe(struct platform_device *dev)
master->cleanup = mpc83xx_spi_cleanup;
mpc83xx_spi = spi_master_get_devdata(master);
mpc83xx_spi->activate_cs = pdata->activate_cs;
mpc83xx_spi->deactivate_cs = pdata->deactivate_cs;
mpc83xx_spi->qe_mode = pdata->qe_mode;
mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u8;
mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u8;
......
......@@ -95,14 +95,15 @@ struct fsl_usb2_platform_data {
#define FSL_USB2_PORT0_ENABLED 0x00000001
#define FSL_USB2_PORT1_ENABLED 0x00000002
struct spi_device;
struct fsl_spi_platform_data {
u32 initial_spmode; /* initial SPMODE value */
u16 bus_num;
bool qe_mode;
/* board specific information */
u16 max_chipselect;
void (*activate_cs)(u8 cs, u8 polarity);
void (*deactivate_cs)(u8 cs, u8 polarity);
void (*cs_control)(struct spi_device *spi, bool on);
u32 sysclk;
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册