提交 3134d04b 编写于 作者: S Sergio Luis 提交者: Rafael J. Wysocki

x86: unify power/cpu_(32|64) regarding restoring processor state

In this step we do unify cpu_32.c and cpu_64.c functions that
work on restoring the saved processor state. Also, we do
eliminate the forward declaration of fix_processor_context()
for X86_64, as it's not needed anymore.
Signed-off-by: NSergio Luis <sergio@larces.uece.br>
Signed-off-by: NLauro Salmito <laurosalmito@gmail.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
上级 f9ebbe53
......@@ -27,8 +27,6 @@ unsigned long saved_context_esi, saved_context_edi;
unsigned long saved_context_eflags;
#else
/* CONFIG_X86_64 */
static void fix_processor_context(void);
struct saved_context saved_context;
#endif
......@@ -136,6 +134,11 @@ static void fix_processor_context(void)
* similar stupidity.
*/
#ifdef CONFIG_X86_64
get_cpu_gdt_table(cpu)[GDT_ENTRY_TSS].type = 9;
syscall_init(); /* This sets MSR_*STAR and related */
#endif
load_TR_desc(); /* This does ltr */
load_LDT(&current->active_mm->context); /* This does lldt */
......@@ -143,6 +146,7 @@ static void fix_processor_context(void)
* Now maybe reload the debug registers
*/
if (current->thread.debugreg7) {
#ifdef CONFIG_X86_32
set_debugreg(current->thread.debugreg0, 0);
set_debugreg(current->thread.debugreg1, 1);
set_debugreg(current->thread.debugreg2, 2);
......@@ -150,18 +154,40 @@ static void fix_processor_context(void)
/* no 4 and 5 */
set_debugreg(current->thread.debugreg6, 6);
set_debugreg(current->thread.debugreg7, 7);
#else
/* CONFIG_X86_64 */
loaddebug(&current->thread, 0);
loaddebug(&current->thread, 1);
loaddebug(&current->thread, 2);
loaddebug(&current->thread, 3);
/* no 4 and 5 */
loaddebug(&current->thread, 6);
loaddebug(&current->thread, 7);
#endif
}
}
/**
* __restore_processor_state - restore the contents of CPU registers saved
* by __save_processor_state()
* @ctxt - structure to load the registers contents from
*/
static void __restore_processor_state(struct saved_context *ctxt)
{
/*
* control registers
*/
/* cr4 was introduced in the Pentium CPU */
#ifdef CONFIG_X86_32
if (ctxt->cr4)
write_cr4(ctxt->cr4);
#else
/* CONFIG X86_64 */
wrmsrl(MSR_EFER, ctxt->efer);
write_cr8(ctxt->cr8);
write_cr4(ctxt->cr4);
#endif
write_cr3(ctxt->cr3);
write_cr2(ctxt->cr2);
write_cr0(ctxt->cr0);
......@@ -170,12 +196,19 @@ static void __restore_processor_state(struct saved_context *ctxt)
* now restore the descriptor tables to their proper values
* ltr is done i fix_processor_context().
*/
#ifdef CONFIG_X86_32
load_gdt(&ctxt->gdt);
load_idt(&ctxt->idt);
#else
/* CONFIG_X86_64 */
load_gdt((const struct desc_ptr *)&ctxt->gdt_limit);
load_idt((const struct desc_ptr *)&ctxt->idt_limit);
#endif
/*
* segment registers
*/
#ifdef CONFIG_X86_32
loadsegment(es, ctxt->es);
loadsegment(fs, ctxt->fs);
loadsegment(gs, ctxt->gs);
......@@ -186,6 +219,18 @@ static void __restore_processor_state(struct saved_context *ctxt)
*/
if (boot_cpu_has(X86_FEATURE_SEP))
enable_sep_cpu();
#else
/* CONFIG_X86_64 */
asm volatile ("movw %0, %%ds" :: "r" (ctxt->ds));
asm volatile ("movw %0, %%es" :: "r" (ctxt->es));
asm volatile ("movw %0, %%fs" :: "r" (ctxt->fs));
load_gs_index(ctxt->gs);
asm volatile ("movw %0, %%ss" :: "r" (ctxt->ss));
wrmsrl(MSR_FS_BASE, ctxt->fs_base);
wrmsrl(MSR_GS_BASE, ctxt->gs_base);
wrmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base);
#endif
/*
* restore XCR0 for xsave capable cpu's.
......@@ -194,9 +239,13 @@ static void __restore_processor_state(struct saved_context *ctxt)
xsetbv(XCR_XFEATURE_ENABLED_MASK, pcntxt_mask);
fix_processor_context();
do_fpu_end();
mtrr_ap_init();
#ifdef CONFIG_X86_32
mcheck_init(&boot_cpu_data);
#endif
}
/* Needed by apm.c */
......@@ -204,4 +253,6 @@ void restore_processor_state(void)
{
__restore_processor_state(&saved_context);
}
#ifdef CONFIG_X86_32
EXPORT_SYMBOL(restore_processor_state);
#endif
......@@ -28,8 +28,6 @@ unsigned long saved_context_esi, saved_context_edi;
unsigned long saved_context_eflags;
#else
/* CONFIG_X86_64 */
static void fix_processor_context(void);
struct saved_context saved_context;
#endif
......@@ -120,11 +118,57 @@ EXPORT_SYMBOL(save_processor_state);
static void do_fpu_end(void)
{
/*
* Restore FPU regs if necessary
* Restore FPU regs if necessary.
*/
kernel_fpu_end();
}
static void fix_processor_context(void)
{
int cpu = smp_processor_id();
struct tss_struct *t = &per_cpu(init_tss, cpu);
set_tss_desc(cpu, t); /*
* This just modifies memory; should not be
* necessary. But... This is necessary, because
* 386 hardware has concept of busy TSS or some
* similar stupidity.
*/
#ifdef CONFIG_X86_64
get_cpu_gdt_table(cpu)[GDT_ENTRY_TSS].type = 9;
syscall_init(); /* This sets MSR_*STAR and related */
#endif
load_TR_desc(); /* This does ltr */
load_LDT(&current->active_mm->context); /* This does lldt */
/*
* Now maybe reload the debug registers
*/
if (current->thread.debugreg7) {
#ifdef CONFIG_X86_32
set_debugreg(current->thread.debugreg0, 0);
set_debugreg(current->thread.debugreg1, 1);
set_debugreg(current->thread.debugreg2, 2);
set_debugreg(current->thread.debugreg3, 3);
/* no 4 and 5 */
set_debugreg(current->thread.debugreg6, 6);
set_debugreg(current->thread.debugreg7, 7);
#else
/* CONFIG_X86_64 */
loaddebug(&current->thread, 0);
loaddebug(&current->thread, 1);
loaddebug(&current->thread, 2);
loaddebug(&current->thread, 3);
/* no 4 and 5 */
loaddebug(&current->thread, 6);
loaddebug(&current->thread, 7);
#endif
}
}
/**
* __restore_processor_state - restore the contents of CPU registers saved
* by __save_processor_state()
......@@ -135,9 +179,16 @@ static void __restore_processor_state(struct saved_context *ctxt)
/*
* control registers
*/
/* cr4 was introduced in the Pentium CPU */
#ifdef CONFIG_X86_32
if (ctxt->cr4)
write_cr4(ctxt->cr4);
#else
/* CONFIG X86_64 */
wrmsrl(MSR_EFER, ctxt->efer);
write_cr8(ctxt->cr8);
write_cr4(ctxt->cr4);
#endif
write_cr3(ctxt->cr3);
write_cr2(ctxt->cr2);
write_cr0(ctxt->cr0);
......@@ -146,13 +197,31 @@ static void __restore_processor_state(struct saved_context *ctxt)
* now restore the descriptor tables to their proper values
* ltr is done i fix_processor_context().
*/
#ifdef CONFIG_X86_32
load_gdt(&ctxt->gdt);
load_idt(&ctxt->idt);
#else
/* CONFIG_X86_64 */
load_gdt((const struct desc_ptr *)&ctxt->gdt_limit);
load_idt((const struct desc_ptr *)&ctxt->idt_limit);
#endif
/*
* segment registers
*/
#ifdef CONFIG_X86_32
loadsegment(es, ctxt->es);
loadsegment(fs, ctxt->fs);
loadsegment(gs, ctxt->gs);
loadsegment(ss, ctxt->ss);
/*
* sysenter MSRs
*/
if (boot_cpu_has(X86_FEATURE_SEP))
enable_sep_cpu();
#else
/* CONFIG_X86_64 */
asm volatile ("movw %0, %%ds" :: "r" (ctxt->ds));
asm volatile ("movw %0, %%es" :: "r" (ctxt->es));
asm volatile ("movw %0, %%fs" :: "r" (ctxt->fs));
......@@ -162,6 +231,7 @@ static void __restore_processor_state(struct saved_context *ctxt)
wrmsrl(MSR_FS_BASE, ctxt->fs_base);
wrmsrl(MSR_GS_BASE, ctxt->gs_base);
wrmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base);
#endif
/*
* restore XCR0 for xsave capable cpu's.
......@@ -173,41 +243,17 @@ static void __restore_processor_state(struct saved_context *ctxt)
do_fpu_end();
mtrr_ap_init();
#ifdef CONFIG_X86_32
mcheck_init(&boot_cpu_data);
#endif
}
/* Needed by apm.c */
void restore_processor_state(void)
{
__restore_processor_state(&saved_context);
}
static void fix_processor_context(void)
{
int cpu = smp_processor_id();
struct tss_struct *t = &per_cpu(init_tss, cpu);
/*
* This just modifies memory; should not be necessary. But... This
* is necessary, because 386 hardware has concept of busy TSS or some
* similar stupidity.
*/
set_tss_desc(cpu, t);
get_cpu_gdt_table(cpu)[GDT_ENTRY_TSS].type = 9;
syscall_init(); /* This sets MSR_*STAR and related */
load_TR_desc(); /* This does ltr */
load_LDT(&current->active_mm->context); /* This does lldt */
/*
* Now maybe reload the debug registers
*/
if (current->thread.debugreg7){
loaddebug(&current->thread, 0);
loaddebug(&current->thread, 1);
loaddebug(&current->thread, 2);
loaddebug(&current->thread, 3);
/* no 4 and 5 */
loaddebug(&current->thread, 6);
loaddebug(&current->thread, 7);
}
}
#ifdef CONFIG_X86_32
EXPORT_SYMBOL(restore_processor_state);
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册