提交 30cd324e 编写于 作者: I Ingo Molnar

Merge branches 'tracing/ftrace', 'tracing/ring-buffer' and 'tracing/urgent' into tracing/core

Conflicts:
	include/linux/ftrace.h
......@@ -24,7 +24,7 @@ real bad - it changes the behaviour of all unaligned instructions in user
space, and might cause programs to fail unexpectedly.
To change the alignment trap behavior, simply echo a number into
/proc/sys/debug/alignment. The number is made up from various bits:
/proc/cpu/alignment. The number is made up from various bits:
bit behavior when set
--- -----------------
......
......@@ -149,7 +149,7 @@ static void do_test_timer(unsigned long data)
int cpu;
/* Increment the counters */
on_each_cpu(test_each, NULL, 0, 1);
on_each_cpu(test_each, NULL, 1);
/* Read all the counters */
printk("Counters read from CPU %d\n", smp_processor_id());
for_each_online_cpu(cpu) {
......
......@@ -114,11 +114,11 @@ modules.
Then you must load the gadget serial driver. To load it as an
ACM device (recommended for interoperability), do this:
modprobe g_serial use_acm=1
modprobe g_serial
To load it as a vendor specific bulk in/out device, do this:
modprobe g_serial
modprobe g_serial use_acm=0
This will also automatically load the underlying gadget peripheral
controller driver. This must be done each time you reboot the gadget
......
......@@ -49,8 +49,10 @@ it and 002/048 sometime later.
These files can be read as binary data. The binary data consists
of first the device descriptor, then the descriptors for each
configuration of the device. That information is also shown in
text form by the /proc/bus/usb/devices file, described later.
configuration of the device. Multi-byte fields in the device and
configuration descriptors, but not other descriptors, are converted
to host endianness by the kernel. This information is also shown
in text form by the /proc/bus/usb/devices file, described later.
These files may also be used to write user-level drivers for the USB
devices. You would open the /proc/bus/usb/BBB/DDD file read/write,
......
......@@ -34,11 +34,12 @@ if usbmon is built into the kernel.
Verify that bus sockets are present.
# ls /sys/kernel/debug/usbmon
0s 0t 0u 1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u
0s 0u 1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u
#
Now you can choose to either use the sockets numbered '0' (to capture packets on
all buses), and skip to step #3, or find the bus used by your device with step #2.
Now you can choose to either use the socket '0u' (to capture packets on all
buses), and skip to step #3, or find the bus used by your device with step #2.
This allows to filter away annoying devices that talk continuously.
2. Find which bus connects to the desired device
......@@ -99,8 +100,9 @@ on the event type, but there is a set of words, common for all types.
Here is the list of words, from left to right:
- URB Tag. This is used to identify URBs is normally a kernel mode address
of the URB structure in hexadecimal.
- URB Tag. This is used to identify URBs, and is normally an in-kernel address
of the URB structure in hexadecimal, but can be a sequence number or any
other unique string, within reason.
- Timestamp in microseconds, a decimal number. The timestamp's resolution
depends on available clock, and so it can be much worse than a microsecond
......
......@@ -1527,10 +1527,10 @@ W: http://ebtables.sourceforge.net/
S: Maintained
ECRYPT FILE SYSTEM
P: Mike Halcrow, Phillip Hellewell
M: mhalcrow@us.ibm.com, phillip@hellewell.homeip.net
L: ecryptfs-devel@lists.sourceforge.net
W: http://ecryptfs.sourceforge.net/
P: Tyler Hicks, Dustin Kirkland
M: tyhicks@linux.vnet.ibm.com, kirkland@canonical.com
L: ecryptfs-devel@lists.launchpad.net
W: https://launchpad.net/ecryptfs
S: Supported
EDAC-CORE
......@@ -3759,6 +3759,15 @@ M: drzeus-sdhci@drzeus.cx
L: sdhci-devel@list.drzeus.cx
S: Maintained
SECURITY SUBSYSTEM
F: security/
P: James Morris
M: jmorris@namei.org
L: linux-kernel@vger.kernel.org
L: linux-security-module@vger.kernel.org (suggested Cc:)
T: git kernel.org:pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
S: Supported
SECURITY CONTACT
P: Security Officers
M: security@kernel.org
......
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 28
EXTRAVERSION = -rc7
EXTRAVERSION = -rc8
NAME = Erotic Pickled Herring
# *DOCUMENTATION*
......
......@@ -630,7 +630,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
return -ENOMEM;
sachip->clk = clk_get(me, "SA1111_CLK");
if (!sachip->clk) {
if (IS_ERR(sachip->clk)) {
ret = PTR_ERR(sachip->clk);
goto err_free;
}
......
......@@ -237,6 +237,7 @@ extern int _find_next_bit_be(const unsigned long *p, int size, int offset);
#if __LINUX_ARM_ARCH__ < 5
#include <asm-generic/bitops/ffz.h>
#include <asm-generic/bitops/__fls.h>
#include <asm-generic/bitops/__ffs.h>
#include <asm-generic/bitops/fls.h>
#include <asm-generic/bitops/ffs.h>
......@@ -277,16 +278,19 @@ static inline int constant_fls(int x)
* the clz instruction for much better code efficiency.
*/
#define __fls(x) \
( __builtin_constant_p(x) ? constant_fls(x) : \
({ int __r; asm("clz\t%0, %1" : "=r"(__r) : "r"(x) : "cc"); 32-__r; }) )
/* Implement fls() in C so that 64-bit args are suitably truncated */
static inline int fls(int x)
{
return __fls(x);
int ret;
if (__builtin_constant_p(x))
return constant_fls(x);
asm("clz\t%0, %1" : "=r" (ret) : "r" (x) : "cc");
ret = 32 - ret;
return ret;
}
#define __fls(x) (fls(x) - 1)
#define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); })
#define __ffs(x) (ffs(x) - 1)
#define ffz(x) __ffs( ~(x) )
......
......@@ -23,7 +23,7 @@
#include <asm/types.h>
#ifdef __KERNEL__
#define STACK_TOP ((current->personality == PER_LINUX_32BIT) ? \
#define STACK_TOP ((current->personality & ADDR_LIMIT_32BIT) ? \
TASK_SIZE : TASK_SIZE_26)
#define STACK_TOP_MAX TASK_SIZE
#endif
......
......@@ -115,6 +115,8 @@ EXPORT_SYMBOL(__strnlen_user);
EXPORT_SYMBOL(__strncpy_from_user);
#ifdef CONFIG_MMU
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(__copy_from_user);
EXPORT_SYMBOL(__copy_to_user);
EXPORT_SYMBOL(__clear_user);
......@@ -181,8 +183,6 @@ EXPORT_SYMBOL(_find_first_bit_be);
EXPORT_SYMBOL(_find_next_bit_be);
#endif
EXPORT_SYMBOL(copy_page);
#ifdef CONFIG_FUNCTION_TRACER
EXPORT_SYMBOL(mcount);
#endif
......@@ -18,6 +18,7 @@
#include <linux/personality.h>
#include <linux/kallsyms.h>
#include <linux/delay.h>
#include <linux/hardirq.h>
#include <linux/init.h>
#include <linux/uaccess.h>
......
......@@ -128,7 +128,7 @@ void __init omap1_map_common_io(void)
* Common low-level hardware init for omap1. This should only get called from
* board specific init.
*/
void __init omap1_init_common_hw()
void __init omap1_init_common_hw(void)
{
/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
* on a Posted Write in the TIPB Bridge".
......
......@@ -12,9 +12,8 @@ extern void clear_reset_status(unsigned int mask);
/**
* init_gpio_reset() - register GPIO as reset generator
*
* @gpio - gpio nr
* @output - set gpio as out/low instead of input during normal work
* @gpio: gpio nr
* @output: set gpio as out/low instead of input during normal work
*/
extern int init_gpio_reset(int gpio, int output);
......
......@@ -70,6 +70,10 @@ static unsigned long ai_dword;
static unsigned long ai_multi;
static int ai_usermode;
#define UM_WARN (1 << 0)
#define UM_FIXUP (1 << 1)
#define UM_SIGNAL (1 << 2)
#ifdef CONFIG_PROC_FS
static const char *usermode_action[] = {
"ignored",
......@@ -754,7 +758,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
user:
ai_user += 1;
if (ai_usermode & 1)
if (ai_usermode & UM_WARN)
printk("Alignment trap: %s (%d) PC=0x%08lx Instr=0x%0*lx "
"Address=0x%08lx FSR 0x%03x\n", current->comm,
task_pid_nr(current), instrptr,
......@@ -762,10 +766,10 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
thumb_mode(regs) ? tinstr : instr,
addr, fsr);
if (ai_usermode & 2)
if (ai_usermode & UM_FIXUP)
goto fixup;
if (ai_usermode & 4)
if (ai_usermode & UM_SIGNAL)
force_sig(SIGBUS, current);
else
set_cr(cr_no_alignment);
......@@ -796,6 +800,22 @@ static int __init alignment_init(void)
res->write_proc = proc_alignment_write;
#endif
/*
* ARMv6 and later CPUs can perform unaligned accesses for
* most single load and store instructions up to word size.
* LDM, STM, LDRD and STRD still need to be handled.
*
* Ignoring the alignment fault is not an option on these
* CPUs since we spin re-faulting the instruction without
* making any progress.
*/
if (cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U)) {
cr_alignment &= ~CR_A;
cr_no_alignment &= ~CR_A;
set_cr(cr_alignment);
ai_usermode = UM_FIXUP;
}
hook_fault_code(1, do_alignment, SIGILL, "alignment exception");
hook_fault_code(3, do_alignment, SIGILL, "alignment exception");
......
......@@ -11,6 +11,7 @@
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/mm.h>
#include <linux/hardirq.h>
#include <linux/init.h>
#include <linux/kprobes.h>
#include <linux/uaccess.h>
......
......@@ -353,8 +353,8 @@ struct omapfb_device {
u32 pseudo_palette[17];
struct lcd_panel *panel; /* LCD panel */
struct lcd_ctrl *ctrl; /* LCD controller */
struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */
const struct lcd_ctrl *ctrl; /* LCD controller */
const struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */
struct lcd_ctrl_extif *ext_if; /* LCD ctrl external
interface */
struct device *dev;
......
......@@ -255,7 +255,7 @@ void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
if (!_omap_sram_reprogram_clock)
omap_sram_error();
return _omap_sram_reprogram_clock(dpllctl, ckctl);
_omap_sram_reprogram_clock(dpllctl, ckctl);
}
int __init omap1_sram_init(void)
......@@ -282,8 +282,8 @@ void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
if (!_omap2_sram_ddr_init)
omap_sram_error();
return _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
base_cs, force_unlock);
_omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
base_cs, force_unlock);
}
static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
......@@ -294,7 +294,7 @@ void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
if (!_omap2_sram_reprogram_sdrc)
omap_sram_error();
return _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
_omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
}
static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
......
......@@ -35,7 +35,7 @@
#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc))
#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16)
#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11)
#define PCIE_CONF_FUNC(f) (((f) & 0x3) << 8)
#define PCIE_CONF_FUNC(f) (((f) & 0x7) << 8)
#define PCIE_CONF_DATA_OFF 0x18fc
#define PCIE_MASK_OFF 0x1910
#define PCIE_CTRL_OFF 0x1a00
......
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.27-rc1
# Mon Aug 4 15:38:01 2008
# Linux kernel version: 2.6.28-rc7
# Mon Dec 8 08:12:07 2008
#
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
......@@ -26,6 +26,7 @@ CONFIG_LOG_BUF_SHIFT=20
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
# CONFIG_GROUP_SCHED is not set
......@@ -46,7 +47,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
......@@ -63,7 +63,9 @@ CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
......@@ -72,15 +74,11 @@ CONFIG_SLUB=y
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
# CONFIG_HAVE_ARCH_TRACEHOOK is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
......@@ -113,6 +111,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
# Processor type and features
......@@ -125,8 +124,6 @@ CONFIG_MMU=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
......@@ -139,13 +136,16 @@ CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_IA64_UNCACHED_ALLOCATOR=y
CONFIG_AUDIT_ARCH=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_DIG_VTD is not set
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_SGI_UV is not set
# CONFIG_IA64_HP_SIM is not set
# CONFIG_IA64_XEN_GUEST is not set
# CONFIG_ITANIUM is not set
CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_4KB is not set
......@@ -182,16 +182,17 @@ CONFIG_DISCONTIGMEM_MANUAL=y
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_MMU_NOTIFIER=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
......@@ -231,12 +232,12 @@ CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
CONFIG_DMIID=y
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
# CONFIG_DMAR is not set
#
# Power management and ACPI
# Power management and ACPI options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
......@@ -248,7 +249,6 @@ CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
# CONFIG_ACPI_BAY is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
......@@ -256,9 +256,7 @@ CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m
......@@ -275,7 +273,7 @@ CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HOTPLUG_PCI=m
......@@ -286,6 +284,7 @@ CONFIG_HOTPLUG_PCI_ACPI=m
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_HOTPLUG_PCI_SGI is not set
# CONFIG_PCCARD is not set
CONFIG_DMAR=y
CONFIG_NET=y
#
......@@ -333,6 +332,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
......@@ -353,11 +353,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
......@@ -385,7 +384,7 @@ CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
......@@ -419,10 +418,9 @@ CONFIG_SGI_XP=m
# CONFIG_HP_ILO is not set
CONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not set
# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
......@@ -430,12 +428,12 @@ CONFIG_BLK_DEV_IDE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
......@@ -705,6 +703,9 @@ CONFIG_TULIP=m
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
......@@ -725,11 +726,11 @@ CONFIG_E100=m
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
CONFIG_IGB=y
......@@ -747,18 +748,22 @@ CONFIG_TIGON3=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_TR is not set
......@@ -826,9 +831,11 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
......@@ -942,15 +949,16 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=m
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
......@@ -959,6 +967,8 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
......@@ -1009,6 +1019,7 @@ CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
......@@ -1113,8 +1124,7 @@ CONFIG_HID=y
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
......@@ -1122,6 +1132,34 @@ CONFIG_USB_HID=m
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_BRIGHT=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DELL=m
CONFIG_HID_EZKEY=m
CONFIG_HID_GYRATION=m
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
......@@ -1138,6 +1176,9 @@ CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
......@@ -1155,6 +1196,12 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# Enable Host or Gadget support to see Inventra options
#
#
# USB Device Class drivers
......@@ -1162,13 +1209,14 @@ CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
# may also be needed; see USB_STORAGE Help for more information
# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
......@@ -1191,7 +1239,6 @@ CONFIG_USB_STORAGE=m
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
#
# USB port drivers
......@@ -1204,7 +1251,7 @@ CONFIG_USB_MON=y
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
......@@ -1222,7 +1269,9 @@ CONFIG_USB_MON=y
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
......@@ -1246,6 +1295,15 @@ CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
CONFIG_STAGING_EXCLUDE_BUILD=y
#
# HP Simulator drivers
#
# CONFIG_HP_SIMETH is not set
# CONFIG_HP_SIMSERIAL is not set
# CONFIG_HP_SIMSCSI is not set
CONFIG_MSPEC=m
#
......@@ -1260,7 +1318,7 @@ CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
......@@ -1271,6 +1329,7 @@ CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
......@@ -1282,8 +1341,8 @@ CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
......@@ -1314,6 +1373,7 @@ CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
......@@ -1356,6 +1416,7 @@ CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_XPRT_RDMA=m
# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
......@@ -1433,38 +1494,6 @@ CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_PER_CPU=y
#
# HP Simulator drivers
#
# CONFIG_HP_SIMETH is not set
# CONFIG_HP_SIMSERIAL is not set
# CONFIG_HP_SIMSCSI is not set
#
# Kernel hacking
......@@ -1503,8 +1532,19 @@ CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
#
# Tracers
#
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
......@@ -1519,14 +1559,19 @@ CONFIG_SYSVIPC_COMPAT=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_MANAGER=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
......@@ -1599,5 +1644,36 @@ CONFIG_CRYPTO_DES=m
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_PER_CPU=y
......@@ -4,6 +4,7 @@ menu "HP Simulator drivers"
config HP_SIMETH
bool "Simulated Ethernet "
depends on NET
config HP_SIMSERIAL
bool "Simulated serial driver support"
......
......@@ -83,7 +83,6 @@ extern unsigned long ia64_native_getreg_func(int regnum);
#define paravirt_getreg(reg) \
({ \
unsigned long res; \
BUILD_BUG_ON(!__builtin_constant_p(reg)); \
if ((reg) == _IA64_REG_IP) \
res = ia64_native_getreg(_IA64_REG_IP); \
else \
......
......@@ -53,10 +53,12 @@ int __ref arch_register_cpu(int num)
}
EXPORT_SYMBOL(arch_register_cpu);
void arch_unregister_cpu(int num)
void __ref arch_unregister_cpu(int num)
{
unregister_cpu(&sysfs_cpus[num].cpu);
#ifdef CONFIG_ACPI
unmap_cpu_from_node(num, cpu_to_node(num));
#endif
}
EXPORT_SYMBOL(arch_unregister_cpu);
#else
......
......@@ -5,7 +5,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved.
* Copyright (c) 2000-2008 Silicon Graphics, Inc. All Rights Reserved.
*/
#include <linux/irq.h>
......@@ -375,6 +375,7 @@ void sn_irq_fixup(struct pci_dev *pci_dev, struct sn_irq_info *sn_irq_info)
int cpu = nasid_slice_to_cpuid(nasid, slice);
#ifdef CONFIG_SMP
int cpuphys;
irq_desc_t *desc;
#endif
pci_dev_get(pci_dev);
......@@ -391,6 +392,12 @@ void sn_irq_fixup(struct pci_dev *pci_dev, struct sn_irq_info *sn_irq_info)
#ifdef CONFIG_SMP
cpuphys = cpu_physical_id(cpu);
set_irq_affinity_info(sn_irq_info->irq_irq, cpuphys, 0);
desc = irq_to_desc(sn_irq_info->irq_irq);
/*
* Affinity was set by the PROM, prevent it from
* being reset by the request_irq() path.
*/
desc->status |= IRQ_AFFINITY_SET;
#endif
}
......
......@@ -200,7 +200,7 @@ static int __cpuinitdata shub_1_1_found;
* Set flag for enabling shub specific wars
*/
static inline int __init is_shub_1_1(int nasid)
static inline int __cpuinit is_shub_1_1(int nasid)
{
unsigned long id;
int rev;
......@@ -212,7 +212,7 @@ static inline int __init is_shub_1_1(int nasid)
return rev <= 2;
}
static void __init sn_check_for_wars(void)
static void __cpuinit sn_check_for_wars(void)
{
int cnode;
......@@ -512,7 +512,6 @@ static void __init sn_init_pdas(char **cmdline_p)
for_each_online_node(cnode) {
nodepdaindr[cnode] =
alloc_bootmem_node(NODE_DATA(cnode), sizeof(nodepda_t));
memset(nodepdaindr[cnode], 0, sizeof(nodepda_t));
memset(nodepdaindr[cnode]->phys_cpuid, -1,
sizeof(nodepdaindr[cnode]->phys_cpuid));
spin_lock_init(&nodepdaindr[cnode]->ptc_lock);
......@@ -521,11 +520,9 @@ static void __init sn_init_pdas(char **cmdline_p)
/*
* Allocate & initialize nodepda for TIOs. For now, put them on node 0.
*/
for (cnode = num_online_nodes(); cnode < num_cnodes; cnode++) {
for (cnode = num_online_nodes(); cnode < num_cnodes; cnode++)
nodepdaindr[cnode] =
alloc_bootmem_node(NODE_DATA(0), sizeof(nodepda_t));
memset(nodepdaindr[cnode], 0, sizeof(nodepda_t));
}
/*
* Now copy the array of nodepda pointers to each nodepda.
......
......@@ -48,7 +48,7 @@ config RUNTIME_DEBUG
help
If you say Y here, some debugging macros will do run-time checking.
If you say N here, those macros will mostly turn to no-ops. See
include/asm-mips/debug.h for debuging macros.
arch/mips/include/asm/debug.h for debugging macros.
If unsure, say N.
endmenu
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
......@@ -35,6 +35,16 @@
mtc0 \reg, CP0_TCSTATUS
_ehb
.endm
#elif defined(CONFIG_CPU_MIPSR2)
.macro local_irq_enable reg=t0
ei
irq_enable_hazard
.endm
.macro local_irq_disable reg=t0
di
irq_disable_hazard
.endm
#else
.macro local_irq_enable reg=t0
mfc0 \reg, CP0_STATUS
......
......@@ -79,6 +79,11 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
/* We don't do dynamic PCI IRQ allocation */
}
#define HAVE_PCI_MMAP
extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine);
/*
* Dynamic DMA mapping stuff.
* MIPS has everything mapped statically.
......
......@@ -262,14 +262,11 @@ bad_alignment:
LEAF(sys_syscall)
subu t0, a0, __NR_O32_Linux # check syscall number
sltiu v0, t0, __NR_O32_Linux_syscalls + 1
beqz t0, einval # do not recurse
sll t1, t0, 3
beqz v0, einval
lw t2, sys_call_table(t1) # syscall routine
li v1, 4000 - __NR_O32_Linux # index of sys_syscall
beq t0, v1, einval # do not recurse
/* Some syscalls like execve get their arguments from struct pt_regs
and claim zero arguments in the syscall table. Thus we have to
assume the worst case and shuffle around all potential arguments.
......@@ -627,7 +624,7 @@ einval: li v0, -ENOSYS
sys sys_pselect6 6
sys sys_ppoll 5
sys sys_unshare 1
sys sys_splice 4
sys sys_splice 6
sys sys_sync_file_range 7 /* 4305 */
sys sys_tee 4
sys sys_vmsplice 4
......
......@@ -390,7 +390,7 @@ EXPORT(sysn32_call_table)
PTR sys_splice
PTR sys_sync_file_range
PTR sys_tee
PTR sys_vmsplice /* 6270 */
PTR compat_sys_vmsplice /* 6270 */
PTR sys_move_pages
PTR compat_sys_set_robust_list
PTR compat_sys_get_robust_list
......
......@@ -174,14 +174,12 @@ not_o32_scall:
END(handle_sys)
LEAF(sys32_syscall)
sltu v0, a0, __NR_O32_Linux + __NR_O32_Linux_syscalls + 1
subu t0, a0, __NR_O32_Linux # check syscall number
sltiu v0, t0, __NR_O32_Linux_syscalls + 1
beqz t0, einval # do not recurse
dsll t1, t0, 3
beqz v0, einval
dsll v0, a0, 3
ld t2, (sys_call_table - (__NR_O32_Linux * 8))(v0)
li v1, 4000 # indirect syscall number
beq a0, v1, einval # do not recurse
ld t2, sys_call_table(t1) # syscall routine
move a0, a1 # shift argument registers
move a1, a2
......@@ -198,7 +196,7 @@ LEAF(sys32_syscall)
jr t2
/* Unreached */
einval: li v0, -EINVAL
einval: li v0, -ENOSYS
jr ra
END(sys32_syscall)
......@@ -512,7 +510,7 @@ sys_call_table:
PTR sys_splice
PTR sys32_sync_file_range /* 4305 */
PTR sys_tee
PTR sys_vmsplice
PTR compat_sys_vmsplice
PTR compat_sys_move_pages
PTR compat_sys_set_robust_list
PTR compat_sys_get_robust_list /* 4310 */
......
......@@ -1134,7 +1134,7 @@ static int vpe_release(struct inode *inode, struct file *filp)
/* It's good to be able to run the SP and if it chokes have a look at
the /dev/rt?. But if we reset the pointer to the shared struct we
loose what has happened. So perhaps if garbage is sent to the vpe
lose what has happened. So perhaps if garbage is sent to the vpe
device, use it as a trigger for the reset. Hopefully a nice
executable will be along shortly. */
if (ret < 0)
......
......@@ -111,6 +111,7 @@ EXPORT_SYMBOL(dma_alloc_coherent);
void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr,
dma_addr_t dma_handle)
{
plat_unmap_dma_mem(dma_handle);
free_pages((unsigned long) vaddr, get_order(size));
}
......@@ -121,6 +122,8 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
{
unsigned long addr = (unsigned long) vaddr;
plat_unmap_dma_mem(dma_handle);
if (!plat_device_is_coherent(dev))
addr = CAC_ADDR(addr);
......
......@@ -7,9 +7,8 @@
#
obj-y := malta-amon.o malta-cmdline.o \
malta-display.o malta-init.o malta-int.o \
malta-memory.o malta-mtd.o \
malta-platform.o malta-reset.o \
malta-setup.o malta-time.o
malta-memory.o malta-platform.o \
malta-reset.o malta-setup.o malta-time.o
obj-$(CONFIG_EARLY_PRINTK) += malta-console.o
obj-$(CONFIG_PCI) += malta-pci.o
......
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2006 MIPS Technologies, Inc.
* written by Ralf Baechle <ralf@linux-mips.org>
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <mtd/mtd-abi.h>
static struct mtd_partition malta_mtd_partitions[] = {
{
.name = "YAMON",
.offset = 0x0,
.size = 0x100000,
.mask_flags = MTD_WRITEABLE
}, {
.name = "User FS",
.offset = 0x100000,
.size = 0x2e0000
}, {
.name = "Board Config",
.offset = 0x3e0000,
.size = 0x020000,
.mask_flags = MTD_WRITEABLE
}
};
static struct physmap_flash_data malta_flash_data = {
.width = 4,
.nr_parts = ARRAY_SIZE(malta_mtd_partitions),
.parts = malta_mtd_partitions
};
static struct resource malta_flash_resource = {
.start = 0x1e000000,
.end = 0x1e3fffff,
.flags = IORESOURCE_MEM
};
static struct platform_device malta_flash = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &malta_flash_data,
},
.num_resources = 1,
.resource = &malta_flash_resource,
};
static int __init malta_mtd_init(void)
{
platform_device_register(&malta_flash);
return 0;
}
module_init(malta_mtd_init)
......@@ -3,10 +3,14 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2007 MIPS Technologies, Inc.
* Copyright (C) 2006, 07 MIPS Technologies, Inc.
* written by Ralf Baechle (ralf@linux-mips.org)
* written by Ralf Baechle <ralf@linux-mips.org>
*
* Probe driver for the Malta's UART ports:
* Copyright (C) 2008 Wind River Systems, Inc.
* updated by Tiejun Chen <tiejun.chen@windriver.com>
*
* 1. Probe driver for the Malta's UART ports:
*
* o 2 ports in the SMC SuperIO
* o 1 port in the CBUS UART, a discrete 16550 which normally is only used
......@@ -14,10 +18,17 @@
*
* We don't use 8250_platform.c on Malta as it would result in the CBUS
* UART becoming ttyS0.
*
* 2. Register RTC-CMOS platform device on Malta.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/serial_8250.h>
#include <linux/mc146818rtc.h>
#include <linux/module.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <mtd/mtd-abi.h>
#define SMC_PORT(base, int) \
{ \
......@@ -45,21 +56,93 @@ static struct plat_serial8250_port uart8250_data[] = {
{ },
};
static struct platform_device uart8250_device = {
static struct platform_device malta_uart8250_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM2,
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = uart8250_data,
},
};
static int __init uart8250_init(void)
struct resource malta_rtc_resources[] = {
{
.start = RTC_PORT(0),
.end = RTC_PORT(7),
.flags = IORESOURCE_IO,
}, {
.start = RTC_IRQ,
.end = RTC_IRQ,
.flags = IORESOURCE_IRQ,
}
};
static struct platform_device malta_rtc_device = {
.name = "rtc_cmos",
.id = -1,
.resource = malta_rtc_resources,
.num_resources = ARRAY_SIZE(malta_rtc_resources),
};
static struct mtd_partition malta_mtd_partitions[] = {
{
.name = "YAMON",
.offset = 0x0,
.size = 0x100000,
.mask_flags = MTD_WRITEABLE
}, {
.name = "User FS",
.offset = 0x100000,
.size = 0x2e0000
}, {
.name = "Board Config",
.offset = 0x3e0000,
.size = 0x020000,
.mask_flags = MTD_WRITEABLE
}
};
static struct physmap_flash_data malta_flash_data = {
.width = 4,
.nr_parts = ARRAY_SIZE(malta_mtd_partitions),
.parts = malta_mtd_partitions
};
static struct resource malta_flash_resource = {
.start = 0x1e000000,
.end = 0x1e3fffff,
.flags = IORESOURCE_MEM
};
static struct platform_device malta_flash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &malta_flash_data,
},
.num_resources = 1,
.resource = &malta_flash_resource,
};
static struct platform_device *malta_devices[] __initdata = {
&malta_uart8250_device,
&malta_rtc_device,
&malta_flash_device,
};
static int __init malta_add_devices(void)
{
return platform_device_register(&uart8250_device);
}
int err;
module_init(uart8250_init);
err = platform_add_devices(malta_devices, ARRAY_SIZE(malta_devices));
if (err)
return err;
/*
* Set RTC to BCD mode to support current alarm code.
*/
CMOS_WRITE(CMOS_READ(RTC_CONTROL) & ~RTC_DM_BINARY, RTC_CONTROL);
return 0;
}
MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("8250 UART probe driver for the Malta CBUS UART");
device_initcall(malta_add_devices);
......@@ -354,6 +354,30 @@ EXPORT_SYMBOL(PCIBIOS_MIN_IO);
EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
#endif
int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine)
{
unsigned long prot;
/*
* I/O space can be accessed via normal processor loads and stores on
* this platform but for now we elect not to do this and portable
* drivers should not do this anyway.
*/
if (mmap_state == pci_mmap_io)
return -EINVAL;
/*
* Ignore write-combine; for now only return uncached mappings.
*/
prot = pgprot_val(vma->vm_page_prot);
prot = (prot & ~_CACHE_MASK) | _CACHE_UNCACHED;
vma->vm_page_prot = __pgprot(prot);
return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
vma->vm_end - vma->vm_start, vma->vm_page_prot);
}
char * (*pcibios_plat_setup)(char *str) __devinitdata;
char *__devinit pcibios_setup(char *str)
......
......@@ -180,6 +180,7 @@ ENTRY(resume_userspace)
#ifdef CONFIG_PREEMPT
ENTRY(resume_kernel)
__cli
mov (TI_preempt_count,a2),d0 # non-zero preempt_count ?
cmp 0,d0
bne restore_all
......@@ -190,7 +191,7 @@ need_resched:
mov (REG_EPSW,fp),d0
and EPSW_IM,d0
cmp EPSW_IM_7,d0 # interrupts off (exception path) ?
beq restore_all
bne restore_all
call preempt_schedule_irq[],0
jmp need_resched
#endif
......
......@@ -99,6 +99,7 @@ int gdbstub_io_rx_char(unsigned char *_ch, int nonblock)
try_again:
/* pull chars out of the buffer */
ix = gdbstub_rx_outp;
barrier();
if (ix == gdbstub_rx_inp) {
if (nonblock)
return -EAGAIN;
......@@ -110,6 +111,7 @@ int gdbstub_io_rx_char(unsigned char *_ch, int nonblock)
ch = gdbstub_rx_buffer[ix++];
st = gdbstub_rx_buffer[ix++];
barrier();
gdbstub_rx_outp = ix & 0x00000fff;
if (st & UART_LSR_BI) {
......
......@@ -566,6 +566,11 @@ static void mn10300_serial_transmit_interrupt(struct mn10300_serial_port *port)
{
_enter("%s", port->name);
if (!port->uart.info || !port->uart.info->port.tty) {
mn10300_serial_dis_tx_intr(port);
return;
}
if (uart_tx_stopped(&port->uart) ||
uart_circ_empty(&port->uart.info->xmit))
mn10300_serial_dis_tx_intr(port);
......
......@@ -161,7 +161,7 @@ void __init setup_arch(char **cmdline_p)
reserve the page it is occupying. */
if (CONFIG_INTERRUPT_VECTOR_BASE >= CONFIG_KERNEL_RAM_BASE_ADDRESS &&
CONFIG_INTERRUPT_VECTOR_BASE < memory_end)
reserve_bootmem(CONFIG_INTERRUPT_VECTOR_BASE, 1,
reserve_bootmem(CONFIG_INTERRUPT_VECTOR_BASE, PAGE_SIZE,
BOOTMEM_DEFAULT);
reserve_bootmem(PAGE_ALIGN(PFN_PHYS(free_pfn)), bootmap_size,
......
......@@ -11,6 +11,7 @@
#define __VMLINUX_LDS__
#include <asm-generic/vmlinux.lds.h>
#include <asm/thread_info.h>
#include <asm/page.h>
OUTPUT_FORMAT("elf32-am33lin", "elf32-am33lin", "elf32-am33lin")
OUTPUT_ARCH(mn10300)
......@@ -55,13 +56,13 @@ SECTIONS
CONSTRUCTORS
}
. = ALIGN(4096);
. = ALIGN(PAGE_SIZE);
__nosave_begin = .;
.data_nosave : { *(.data.nosave) }
. = ALIGN(4096);
. = ALIGN(PAGE_SIZE);
__nosave_end = .;
. = ALIGN(4096);
. = ALIGN(PAGE_SIZE);
.data.page_aligned : { *(.data.idt) }
. = ALIGN(32);
......@@ -78,7 +79,7 @@ SECTIONS
.data.init_task : { *(.data.init_task) }
/* might get freed after init */
. = ALIGN(4096);
. = ALIGN(PAGE_SIZE);
.smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
__smp_locks = .;
*(.smp_locks)
......@@ -86,7 +87,7 @@ SECTIONS
}
/* will be freed after init */
. = ALIGN(4096); /* Init code and data */
. = ALIGN(PAGE_SIZE); /* Init code and data */
__init_begin = .;
.init.text : {
_sinittext = .;
......@@ -120,17 +121,14 @@ SECTIONS
.exit.data : { *(.exit.data) }
#ifdef CONFIG_BLK_DEV_INITRD
. = ALIGN(4096);
. = ALIGN(PAGE_SIZE);
__initramfs_start = .;
.init.ramfs : { *(.init.ramfs) }
__initramfs_end = .;
#endif
. = ALIGN(32);
__per_cpu_start = .;
.data.percpu : { *(.data.percpu) }
__per_cpu_end = .;
. = ALIGN(4096);
PERCPU(32)
. = ALIGN(PAGE_SIZE);
__init_end = .;
/* freed after init ends here */
......@@ -145,7 +143,7 @@ SECTIONS
_end = . ;
/* This is where the kernel creates the early boot page tables */
. = ALIGN(4096);
. = ALIGN(PAGE_SIZE);
pg0 = .;
/* Sections to be discarded */
......
......@@ -41,6 +41,7 @@ $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
......
......@@ -723,7 +723,7 @@ CONFIG_CICADA_PHY=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
......
......@@ -682,7 +682,7 @@ CONFIG_VITESSE_PHY=y
# CONFIG_BROADCOM_PHY is not set
CONFIG_ICPLUS_PHY=y
# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
......
......@@ -40,6 +40,7 @@ _GLOBAL(__setup_cpu_460gt)
mtlr r4
blr
_GLOBAL(__setup_cpu_440x5)
_GLOBAL(__setup_cpu_440gx)
_GLOBAL(__setup_cpu_440spe)
b __fixup_440A_mcheck
......
......@@ -39,6 +39,7 @@ extern void __setup_cpu_440epx(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_440gx(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_440grx(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_440spe(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_440x5(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_460ex(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_460gt(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_603(unsigned long offset, struct cpu_spec* spec);
......@@ -1500,6 +1501,8 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_user_features = COMMON_USER_BOOKE,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_440x5,
.machine_check = machine_check_440A,
.platform = "ppc440",
},
{ /* 460EX */
......
......@@ -479,17 +479,20 @@ _GLOBAL(_tlbil_pid)
* (no broadcast)
*/
_GLOBAL(_tlbil_va)
mfmsr r10
wrteei 0
slwi r4,r4,16
mtspr SPRN_MAS6,r4 /* assume AS=0 for now */
tlbsx 0,r3
mfspr r4,SPRN_MAS1 /* check valid */
andis. r3,r4,MAS1_VALID@h
beqlr
beq 1f
rlwinm r4,r4,0,1,31
mtspr SPRN_MAS1,r4
tlbwe
msync
isync
1: wrtee r10
blr
#endif /* CONFIG_FSL_BOOKE */
......
......@@ -556,6 +556,7 @@ unsigned long rh_alloc_fixed(rh_info_t * info, unsigned long start, int size, co
be = blk->start + blk->size;
if (s >= bs && e <= be)
break;
blk = NULL;
}
if (blk == NULL)
......
......@@ -507,6 +507,9 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
{
struct hstate *hstate = hstate_file(file);
int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate));
if (!mmu_huge_psizes[mmu_psize])
return -EINVAL;
return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1, 0);
}
......
......@@ -901,10 +901,17 @@ static void mark_reserved_regions_for_nid(int nid)
if (end_pfn > node_ar.end_pfn)
reserve_size = (node_ar.end_pfn << PAGE_SHIFT)
- (start_pfn << PAGE_SHIFT);
dbg("reserve_bootmem %lx %lx nid=%d\n", physbase,
reserve_size, node_ar.nid);
reserve_bootmem_node(NODE_DATA(node_ar.nid), physbase,
reserve_size, BOOTMEM_DEFAULT);
/*
* Only worry about *this* node, others may not
* yet have valid NODE_DATA().
*/
if (node_ar.nid == nid) {
dbg("reserve_bootmem %lx %lx nid=%d\n",
physbase, reserve_size, node_ar.nid);
reserve_bootmem_node(NODE_DATA(node_ar.nid),
physbase, reserve_size,
BOOTMEM_DEFAULT);
}
/*
* if reserved region is contained in the active region
* then done.
......@@ -929,7 +936,6 @@ static void mark_reserved_regions_for_nid(int nid)
void __init do_init_bootmem(void)
{
int nid;
unsigned int i;
min_low_pfn = 0;
max_low_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
......
......@@ -413,6 +413,9 @@ static int axon_msi_probe(struct of_device *device,
MSIC_CTRL_IRQ_ENABLE | MSIC_CTRL_ENABLE |
MSIC_CTRL_FIFO_SIZE);
msic->read_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG)
& MSIC_FIFO_SIZE_MASK;
device->dev.platform_data = msic;
ppc_md.setup_msi_irqs = axon_msi_setup_msi_irqs;
......
......@@ -55,6 +55,8 @@ config GENERIC_HARDIRQS
config GENERIC_HARDIRQS_NO__DO_IRQ
def_bool y
depends on SUPERH32 && (!SH_DREAMCAST && !SH_SH4202_MICRODEV && \
!SH_7751_SYSTEMH && !HD64461)
config GENERIC_IRQ_PROBE
def_bool y
......
......@@ -98,6 +98,7 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
#include <asm-generic/bitops/sched.h>
#include <asm-generic/bitops/ffs.h>
#include <asm-generic/bitops/fls.h>
#include <asm-generic/bitops/__fls.h>
#include <asm-generic/bitops/fls64.h>
#include <asm-generic/bitops/hweight.h>
#include <asm-generic/bitops/lock.h>
......
......@@ -1014,7 +1014,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
break;
case PTRACE_SETFPREGS64:
ret = copy_regset_to_user(child, view, REGSET_FP,
ret = copy_regset_from_user(child, view, REGSET_FP,
0 * sizeof(u64),
33 * sizeof(u64),
fps);
......
......@@ -131,7 +131,7 @@
#define VIS_OPF_SHIFT 5
#define VIS_OPF_MASK (0x1ff << VIS_OPF_SHIFT)
#define RS1(INSN) (((INSN) >> 24) & 0x1f)
#define RS1(INSN) (((INSN) >> 14) & 0x1f)
#define RS2(INSN) (((INSN) >> 0) & 0x1f)
#define RD(INSN) (((INSN) >> 25) & 0x1f)
......@@ -445,7 +445,7 @@ static void pdist(struct pt_regs *regs, unsigned int insn)
unsigned long i;
rs1 = fpd_regval(f, RS1(insn));
rs2 = fpd_regval(f, RS1(insn));
rs2 = fpd_regval(f, RS2(insn));
rd = fpd_regaddr(f, RD(insn));
rd_val = *rd;
......@@ -807,6 +807,8 @@ int vis_emul(struct pt_regs *regs, unsigned int insn)
if (get_user(insn, (u32 __user *) pc))
return -EFAULT;
save_and_clear_fpu();
opf = (insn & VIS_OPF_MASK) >> VIS_OPF_SHIFT;
switch (opf) {
default:
......
......@@ -16,6 +16,8 @@
#include <linux/slab.h>
#include <linux/syscalls.h>
#include <linux/utsname.h>
#include <linux/socket.h>
#include <linux/un.h>
#include <linux/workqueue.h>
#include <linux/mutex.h>
#include <asm/uaccess.h>
......@@ -785,7 +787,7 @@ static int __init mconsole_init(void)
/* long to avoid size mismatch warnings from gcc */
long sock;
int err;
char file[256];
char file[UNIX_PATH_MAX];
if (umid_file_name("mconsole", file, sizeof(file)))
return -1;
......
......@@ -251,13 +251,6 @@ struct amd_iommu {
/* Pointer to PCI device of this IOMMU */
struct pci_dev *dev;
/*
* Capability pointer. There could be more than one IOMMU per PCI
* device function if there are more than one AMD IOMMU capability
* pointers.
*/
u16 cap_ptr;
/* physical address of MMIO space */
u64 mmio_phys;
/* virtual address of MMIO space */
......@@ -266,6 +259,13 @@ struct amd_iommu {
/* capabilities of that IOMMU read from ACPI */
u32 cap;
/*
* Capability pointer. There could be more than one IOMMU per PCI
* device function if there are more than one AMD IOMMU capability
* pointers.
*/
u16 cap_ptr;
/* pci domain of this IOMMU */
u16 pci_seg;
......@@ -284,19 +284,19 @@ struct amd_iommu {
/* size of command buffer */
u32 cmd_buf_size;
/* event buffer virtual address */
u8 *evt_buf;
/* size of event buffer */
u32 evt_buf_size;
/* event buffer virtual address */
u8 *evt_buf;
/* MSI number for event interrupt */
u16 evt_msi_num;
/* if one, we need to send a completion wait command */
int need_sync;
/* true if interrupts for this IOMMU are already enabled */
bool int_enabled;
/* if one, we need to send a completion wait command */
int need_sync;
/* default dma_ops domain for that IOMMU */
struct dma_ops_domain *default_dom;
};
......
......@@ -71,15 +71,13 @@ static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
/* Make sure we keep the same behaviour */
static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
{
#ifdef CONFIG_X86_32
return 0;
#else
#ifdef CONFIG_X86_64
struct dma_mapping_ops *ops = get_dma_ops(dev);
if (ops->mapping_error)
return ops->mapping_error(dev, dma_addr);
return (dma_addr == bad_dma_address);
#endif
return (dma_addr == bad_dma_address);
}
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
......
......@@ -239,7 +239,7 @@ struct pci_bus;
void set_pci_bus_resources_arch_default(struct pci_bus *b);
#ifdef CONFIG_SMP
#define mc_capable() (boot_cpu_data.x86_max_cores > 1)
#define mc_capable() (cpus_weight(per_cpu(cpu_core_map, 0)) != nr_cpu_ids)
#define smt_capable() (smp_num_siblings > 1)
#endif
......
......@@ -223,9 +223,15 @@ struct pci_header {
} __attribute__((packed));
/* Function prototypes for bootstrapping */
#ifdef CONFIG_VMI
extern void vmi_init(void);
extern void vmi_activate(void);
extern void vmi_bringup(void);
extern void vmi_apply_boot_page_allocations(void);
#else
static inline void vmi_init(void) {}
static inline void vmi_activate(void) {}
static inline void vmi_bringup(void) {}
#endif
/* State needed to start an application processor in an SMP system. */
struct vmi_ap_state {
......
......@@ -187,6 +187,8 @@ static int iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd)
spin_lock_irqsave(&iommu->lock, flags);
ret = __iommu_queue_command(iommu, cmd);
if (!ret)
iommu->need_sync = 1;
spin_unlock_irqrestore(&iommu->lock, flags);
return ret;
......@@ -210,10 +212,13 @@ static int iommu_completion_wait(struct amd_iommu *iommu)
cmd.data[0] = CMD_COMPL_WAIT_INT_MASK;
CMD_SET_TYPE(&cmd, CMD_COMPL_WAIT);
iommu->need_sync = 0;
spin_lock_irqsave(&iommu->lock, flags);
if (!iommu->need_sync)
goto out;
iommu->need_sync = 0;
ret = __iommu_queue_command(iommu, &cmd);
if (ret)
......@@ -254,8 +259,6 @@ static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid)
ret = iommu_queue_command(iommu, &cmd);
iommu->need_sync = 1;
return ret;
}
......@@ -281,8 +284,6 @@ static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu,
ret = iommu_queue_command(iommu, &cmd);
iommu->need_sync = 1;
return ret;
}
......@@ -343,7 +344,7 @@ static int iommu_map(struct protection_domain *dom,
u64 __pte, *pte, *page;
bus_addr = PAGE_ALIGN(bus_addr);
phys_addr = PAGE_ALIGN(bus_addr);
phys_addr = PAGE_ALIGN(phys_addr);
/* only support 512GB address spaces for now */
if (bus_addr > IOMMU_MAP_SIZE_L3 || !(prot & IOMMU_PROT_MASK))
......@@ -599,7 +600,7 @@ static void dma_ops_free_pagetable(struct dma_ops_domain *dma_dom)
continue;
p2 = IOMMU_PTE_PAGE(p1[i]);
for (j = 0; j < 512; ++i) {
for (j = 0; j < 512; ++j) {
if (!IOMMU_PTE_PRESENT(p2[j]))
continue;
p3 = IOMMU_PTE_PAGE(p2[j]);
......@@ -762,8 +763,6 @@ static void set_device_domain(struct amd_iommu *iommu,
write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
iommu_queue_inv_dev_entry(iommu, devid);
iommu->need_sync = 1;
}
/*****************************************************************************
......@@ -858,6 +857,9 @@ static int get_device_resources(struct device *dev,
print_devid(_bdf, 1);
}
if (domain_for_device(_bdf) == NULL)
set_device_domain(*iommu, *domain, _bdf);
return 1;
}
......@@ -908,7 +910,7 @@ static void dma_ops_domain_unmap(struct amd_iommu *iommu,
if (address >= dom->aperture_size)
return;
WARN_ON(address & 0xfffULL || address > dom->aperture_size);
WARN_ON(address & ~PAGE_MASK || address >= dom->aperture_size);
pte = dom->pte_pages[IOMMU_PTE_L1_INDEX(address)];
pte += IOMMU_PTE_L0_INDEX(address);
......@@ -920,8 +922,8 @@ static void dma_ops_domain_unmap(struct amd_iommu *iommu,
/*
* This function contains common code for mapping of a physically
* contiguous memory region into DMA address space. It is uses by all
* mapping functions provided by this IOMMU driver.
* contiguous memory region into DMA address space. It is used by all
* mapping functions provided with this IOMMU driver.
* Must be called with the domain lock held.
*/
static dma_addr_t __map_single(struct device *dev,
......@@ -981,7 +983,8 @@ static void __unmap_single(struct amd_iommu *iommu,
dma_addr_t i, start;
unsigned int pages;
if ((dma_addr == 0) || (dma_addr + size > dma_dom->aperture_size))
if ((dma_addr == bad_dma_address) ||
(dma_addr + size > dma_dom->aperture_size))
return;
pages = iommu_num_pages(dma_addr, size, PAGE_SIZE);
......@@ -1031,8 +1034,7 @@ static dma_addr_t map_single(struct device *dev, phys_addr_t paddr,
if (addr == bad_dma_address)
goto out;
if (unlikely(iommu->need_sync))
iommu_completion_wait(iommu);
iommu_completion_wait(iommu);
out:
spin_unlock_irqrestore(&domain->lock, flags);
......@@ -1060,8 +1062,7 @@ static void unmap_single(struct device *dev, dma_addr_t dma_addr,
__unmap_single(iommu, domain->priv, dma_addr, size, dir);
if (unlikely(iommu->need_sync))
iommu_completion_wait(iommu);
iommu_completion_wait(iommu);
spin_unlock_irqrestore(&domain->lock, flags);
}
......@@ -1127,8 +1128,7 @@ static int map_sg(struct device *dev, struct scatterlist *sglist,
goto unmap;
}
if (unlikely(iommu->need_sync))
iommu_completion_wait(iommu);
iommu_completion_wait(iommu);
out:
spin_unlock_irqrestore(&domain->lock, flags);
......@@ -1173,8 +1173,7 @@ static void unmap_sg(struct device *dev, struct scatterlist *sglist,
s->dma_address = s->dma_length = 0;
}
if (unlikely(iommu->need_sync))
iommu_completion_wait(iommu);
iommu_completion_wait(iommu);
spin_unlock_irqrestore(&domain->lock, flags);
}
......@@ -1225,8 +1224,7 @@ static void *alloc_coherent(struct device *dev, size_t size,
goto out;
}
if (unlikely(iommu->need_sync))
iommu_completion_wait(iommu);
iommu_completion_wait(iommu);
out:
spin_unlock_irqrestore(&domain->lock, flags);
......@@ -1257,8 +1255,7 @@ static void free_coherent(struct device *dev, size_t size,
__unmap_single(iommu, domain->priv, dma_addr, size, DMA_BIDIRECTIONAL);
if (unlikely(iommu->need_sync))
iommu_completion_wait(iommu);
iommu_completion_wait(iommu);
spin_unlock_irqrestore(&domain->lock, flags);
......
......@@ -604,6 +604,9 @@ static void __init __get_smp_config(unsigned int early)
printk(KERN_INFO "Using ACPI for processor (LAPIC) "
"configuration information\n");
if (!mpf)
return;
printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n",
mpf->mpf_specification);
#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32)
......
......@@ -7,7 +7,8 @@
#include <asm/paravirt.h>
static void default_spin_lock_flags(struct raw_spinlock *lock, unsigned long flags)
static inline void
default_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags)
{
__raw_spin_lock(lock);
}
......
......@@ -123,6 +123,8 @@ static void free_iommu(unsigned long offset, int size)
spin_lock_irqsave(&iommu_bitmap_lock, flags);
iommu_area_free(iommu_gart_bitmap, offset, size);
if (offset >= next_bit)
next_bit = offset + size;
spin_unlock_irqrestore(&iommu_bitmap_lock, flags);
}
......
......@@ -794,6 +794,9 @@ void __init setup_arch(char **cmdline_p)
printk(KERN_INFO "Command line: %s\n", boot_command_line);
#endif
/* VMI may relocate the fixmap; do this before touching ioremap area */
vmi_init();
early_cpu_init();
early_ioremap_init();
......@@ -880,13 +883,8 @@ void __init setup_arch(char **cmdline_p)
check_efer();
#endif
#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
/*
* Must be before kernel pagetables are setup
* or fixmap area is touched.
*/
vmi_init();
#endif
/* Must be before kernel pagetables are setup */
vmi_activate();
/* after early param, so could get panic from serial */
reserve_early_setup_data();
......
......@@ -294,9 +294,7 @@ static void __cpuinit start_secondary(void *unused)
* fragile that we want to limit the things done here to the
* most necessary things.
*/
#ifdef CONFIG_VMI
vmi_bringup();
#endif
cpu_init();
preempt_disable();
smp_callin();
......
......@@ -960,8 +960,6 @@ static inline int __init activate_vmi(void)
void __init vmi_init(void)
{
unsigned long flags;
if (!vmi_rom)
probe_vmi_rom();
else
......@@ -973,13 +971,21 @@ void __init vmi_init(void)
reserve_top_address(-vmi_rom->virtual_top);
local_irq_save(flags);
activate_vmi();
#ifdef CONFIG_X86_IO_APIC
/* This is virtual hardware; timer routing is wired correctly */
no_timer_check = 1;
#endif
}
void vmi_activate(void)
{
unsigned long flags;
if (!vmi_rom)
return;
local_irq_save(flags);
activate_vmi();
local_irq_restore(flags & X86_EFLAGS_IF);
}
......
......@@ -401,14 +401,13 @@ static int __init ppro_init(char **cpu_type)
*cpu_type = "i386/pii";
break;
case 6 ... 8:
case 10 ... 11:
*cpu_type = "i386/piii";
break;
case 9:
case 13:
*cpu_type = "i386/p6_mobile";
break;
case 10 ... 13:
*cpu_type = "i386/p6";
break;
case 14:
*cpu_type = "i386/core";
break;
......
......@@ -156,6 +156,8 @@ static void ppro_start(struct op_msrs const * const msrs)
unsigned int low, high;
int i;
if (!reset_value)
return;
for (i = 0; i < num_counters; ++i) {
if (reset_value[i]) {
CTRL_READ(low, high, msrs, i);
......@@ -171,6 +173,8 @@ static void ppro_stop(struct op_msrs const * const msrs)
unsigned int low, high;
int i;
if (!reset_value)
return;
for (i = 0; i < num_counters; ++i) {
if (!reset_value[i])
continue;
......
......@@ -202,6 +202,8 @@ static int blk_fill_sgv4_hdr_rq(struct request_queue *q, struct request *rq,
rq->timeout = q->sg_timeout;
if (!rq->timeout)
rq->timeout = BLK_DEFAULT_SG_TIMEOUT;
if (rq->timeout < BLK_MIN_SG_TIMEOUT)
rq->timeout = BLK_MIN_SG_TIMEOUT;
return 0;
}
......
......@@ -677,6 +677,29 @@ static int compat_blkdev_driver_ioctl(struct block_device *bdev, fmode_t mode,
case DVD_WRITE_STRUCT:
case DVD_AUTH:
arg = (unsigned long)compat_ptr(arg);
/* These intepret arg as an unsigned long, not as a pointer,
* so we must not do compat_ptr() conversion. */
case HDIO_SET_MULTCOUNT:
case HDIO_SET_UNMASKINTR:
case HDIO_SET_KEEPSETTINGS:
case HDIO_SET_32BIT:
case HDIO_SET_NOWERR:
case HDIO_SET_DMA:
case HDIO_SET_PIO_MODE:
case HDIO_SET_NICE:
case HDIO_SET_WCACHE:
case HDIO_SET_ACOUSTIC:
case HDIO_SET_BUSSTATE:
case HDIO_SET_ADDRESS:
case CDROMEJECT_SW:
case CDROM_SET_OPTIONS:
case CDROM_CLEAR_OPTIONS:
case CDROM_SELECT_SPEED:
case CDROM_SELECT_DISC:
case CDROM_MEDIA_CHANGED:
case CDROM_DRIVE_STATUS:
case CDROM_LOCKDOOR:
case CDROM_DEBUG:
break;
default:
/* unknown ioctl number */
......@@ -699,8 +722,14 @@ long compat_blkdev_ioctl(struct file *file, unsigned cmd, unsigned long arg)
struct backing_dev_info *bdi;
loff_t size;
/*
* O_NDELAY can be altered using fcntl(.., F_SETFL, ..), so we have
* to updated it before every ioctl.
*/
if (file->f_flags & O_NDELAY)
mode |= FMODE_NDELAY_NOW;
mode |= FMODE_NDELAY;
else
mode &= ~FMODE_NDELAY;
switch (cmd) {
case HDIO_GETGEO:
......
......@@ -208,6 +208,8 @@ static int blk_fill_sghdr_rq(struct request_queue *q, struct request *rq,
rq->timeout = q->sg_timeout;
if (!rq->timeout)
rq->timeout = BLK_DEFAULT_SG_TIMEOUT;
if (rq->timeout < BLK_MIN_SG_TIMEOUT)
rq->timeout = BLK_MIN_SG_TIMEOUT;
return 0;
}
......
......@@ -31,35 +31,63 @@ config CRYPTO_FIPS
config CRYPTO_ALGAPI
tristate
select CRYPTO_ALGAPI2
help
This option provides the API for cryptographic algorithms.
config CRYPTO_ALGAPI2
tristate
config CRYPTO_AEAD
tristate
select CRYPTO_AEAD2
select CRYPTO_ALGAPI
config CRYPTO_AEAD2
tristate
select CRYPTO_ALGAPI2
config CRYPTO_BLKCIPHER
tristate
select CRYPTO_BLKCIPHER2
select CRYPTO_ALGAPI
select CRYPTO_RNG
config CRYPTO_BLKCIPHER2
tristate
select CRYPTO_ALGAPI2
select CRYPTO_RNG2
config CRYPTO_HASH
tristate
select CRYPTO_HASH2
select CRYPTO_ALGAPI
config CRYPTO_HASH2
tristate
select CRYPTO_ALGAPI2
config CRYPTO_RNG
tristate
select CRYPTO_RNG2
select CRYPTO_ALGAPI
config CRYPTO_RNG2
tristate
select CRYPTO_ALGAPI2
config CRYPTO_MANAGER
tristate "Cryptographic algorithm manager"
select CRYPTO_AEAD
select CRYPTO_HASH
select CRYPTO_BLKCIPHER
select CRYPTO_MANAGER2
help
Create default cryptographic template instantiations such as
cbc(aes).
config CRYPTO_MANAGER2
def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y)
select CRYPTO_AEAD2
select CRYPTO_HASH2
select CRYPTO_BLKCIPHER2
config CRYPTO_GF128MUL
tristate "GF(2^128) multiplication functions (EXPERIMENTAL)"
depends on EXPERIMENTAL
......
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册