提交 2e8f7a31 编写于 作者: J Jim Cromie 提交者: Linus Torvalds

[PATCH] gpio: rename exported vtables to better match purpose

- rename EXPORTed gpio vtables from {scx200,pc8736x}_access to _gpio_ops new
  name is much closer to the vtable-name struct nsc_gpio_ops, should be
  clearer.  Also rename the _fops vtable var to _fileops to better
  disambiguate it from the gpio vtable.
Signed-off-by: NJim Cromie <jim.cromie@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 abecb6da
......@@ -212,7 +212,7 @@ static void pc8736x_gpio_change(unsigned index)
pc8736x_gpio_set(index, !pc8736x_gpio_current(index));
}
static struct nsc_gpio_ops pc8736x_access = {
static struct nsc_gpio_ops pc8736x_gpio_ops = {
.owner = THIS_MODULE,
.gpio_config = pc8736x_gpio_configure,
.gpio_dump = nsc_gpio_dump,
......@@ -221,11 +221,12 @@ static struct nsc_gpio_ops pc8736x_access = {
.gpio_change = pc8736x_gpio_change,
.gpio_current = pc8736x_gpio_current
};
EXPORT_SYMBOL(pc8736x_gpio_ops);
static int pc8736x_gpio_open(struct inode *inode, struct file *file)
{
unsigned m = iminor(inode);
file->private_data = &pc8736x_access;
file->private_data = &pc8736x_gpio_ops;
dev_dbg(&pdev->dev, "open %d\n", m);
......@@ -234,7 +235,7 @@ static int pc8736x_gpio_open(struct inode *inode, struct file *file)
return nonseekable_open(inode, file);
}
static const struct file_operations pc8736x_gpio_fops = {
static const struct file_operations pc8736x_gpio_fileops = {
.owner = THIS_MODULE,
.open = pc8736x_gpio_open,
.write = nsc_gpio_write,
......@@ -276,7 +277,7 @@ static int __init pc8736x_gpio_init(void)
dev_err(&pdev->dev, "no device found\n");
goto undo_platform_dev_add;
}
pc8736x_access.dev = &pdev->dev;
pc8736x_gpio_ops.dev = &pdev->dev;
/* Verify that chip and it's GPIO unit are both enabled.
My BIOS does this, so I take minimum action here
......@@ -326,7 +327,7 @@ static int __init pc8736x_gpio_init(void)
pc8736x_init_shadow();
/* ignore minor errs, and succeed */
cdev_init(&pc8736x_gpio_cdev, &pc8736x_gpio_fops);
cdev_init(&pc8736x_gpio_cdev, &pc8736x_gpio_fileops);
cdev_add(&pc8736x_gpio_cdev, devid, PC8736X_GPIO_CT);
return 0;
......@@ -353,7 +354,5 @@ static void __exit pc8736x_gpio_cleanup(void)
platform_device_put(pdev);
}
EXPORT_SYMBOL(pc8736x_access);
module_init(pc8736x_gpio_init);
module_exit(pc8736x_gpio_cleanup);
......@@ -35,7 +35,7 @@ MODULE_PARM_DESC(major, "Major device number");
#define MAX_PINS 32 /* 64 later, when known ok */
struct nsc_gpio_ops scx200_access = {
struct nsc_gpio_ops scx200_gpio_ops = {
.owner = THIS_MODULE,
.gpio_config = scx200_gpio_configure,
.gpio_dump = nsc_gpio_dump,
......@@ -44,12 +44,12 @@ struct nsc_gpio_ops scx200_access = {
.gpio_change = scx200_gpio_change,
.gpio_current = scx200_gpio_current
};
EXPORT_SYMBOL(scx200_access);
EXPORT_SYMBOL(scx200_gpio_ops);
static int scx200_gpio_open(struct inode *inode, struct file *file)
{
unsigned m = iminor(inode);
file->private_data = &scx200_access;
file->private_data = &scx200_gpio_ops;
if (m >= MAX_PINS)
return -EINVAL;
......@@ -61,7 +61,7 @@ static int scx200_gpio_release(struct inode *inode, struct file *file)
return 0;
}
static const struct file_operations scx200_gpio_fops = {
static const struct file_operations scx200_gpio_fileops = {
.owner = THIS_MODULE,
.write = nsc_gpio_write,
.read = nsc_gpio_read,
......@@ -91,7 +91,7 @@ static int __init scx200_gpio_init(void)
goto undo_malloc;
/* nsc_gpio uses dev_dbg(), so needs this */
scx200_access.dev = &pdev->dev;
scx200_gpio_ops.dev = &pdev->dev;
if (major) {
devid = MKDEV(major, 0);
......@@ -105,7 +105,7 @@ static int __init scx200_gpio_init(void)
goto undo_platform_device_add;
}
cdev_init(&scx200_gpio_cdev, &scx200_gpio_fops);
cdev_init(&scx200_gpio_cdev, &scx200_gpio_fileops);
cdev_add(&scx200_gpio_cdev, devid, MAX_PINS);
return 0; /* succeed */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册