提交 2832a81d 编写于 作者: G Geoff Levand 提交者: Paul Mackerras

[POWERPC] ps3: add interrupt support

Adds routines to interface with the PS3 interrupt services.
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
上级 6e74b38a
/*
* PS3 interrupt routines.
*
* Copyright (C) 2006 Sony Computer Entertainment Inc.
* Copyright 2006 Sony Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/irq.h>
#include <asm/machdep.h>
#include <asm/udbg.h>
#include <asm/ps3.h>
#include <asm/lv1call.h>
#include "platform.h"
#if defined(DEBUG)
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...) do{if(0)printk(fmt);}while(0)
#endif
/**
* ps3_alloc_io_irq - Assign a virq to a system bus device.
* interrupt_id: The device interrupt id read from the system repository.
* @virq: The assigned Linux virq.
*
* An io irq represents a non-virtualized device interrupt. interrupt_id
* coresponds to the interrupt number of the interrupt controller.
*/
int ps3_alloc_io_irq(unsigned int interrupt_id, unsigned int *virq)
{
int result;
unsigned long outlet;
result = lv1_construct_io_irq_outlet(interrupt_id, &outlet);
if (result) {
pr_debug("%s:%d: lv1_construct_io_irq_outlet failed: %s\n",
__func__, __LINE__, ps3_result(result));
return result;
}
*virq = irq_create_mapping(NULL, outlet);
pr_debug("%s:%d: interrupt_id %u => outlet %lu, virq %u\n",
__func__, __LINE__, interrupt_id, outlet, *virq);
return 0;
}
int ps3_free_io_irq(unsigned int virq)
{
int result;
result = lv1_destruct_io_irq_outlet(virq_to_hw(virq));
if (!result)
pr_debug("%s:%d: lv1_destruct_io_irq_outlet failed: %s\n",
__func__, __LINE__, ps3_result(result));
irq_dispose_mapping(virq);
return result;
}
/**
* ps3_alloc_event_irq - Allocate a virq for use with a system event.
* @virq: The assigned Linux virq.
*
* The virq can be used with lv1_connect_interrupt_event_receive_port() to
* arrange to receive events, or with ps3_send_event_locally() to signal
* events.
*/
int ps3_alloc_event_irq(unsigned int *virq)
{
int result;
unsigned long outlet;
result = lv1_construct_event_receive_port(&outlet);
if (result) {
pr_debug("%s:%d: lv1_construct_event_receive_port failed: %s\n",
__func__, __LINE__, ps3_result(result));
*virq = NO_IRQ;
return result;
}
*virq = irq_create_mapping(NULL, outlet);
pr_debug("%s:%d: outlet %lu, virq %u\n", __func__, __LINE__, outlet,
*virq);
return 0;
}
int ps3_free_event_irq(unsigned int virq)
{
int result;
pr_debug(" -> %s:%d\n", __func__, __LINE__);
result = lv1_destruct_event_receive_port(virq_to_hw(virq));
if (result)
pr_debug("%s:%d: lv1_destruct_event_receive_port failed: %s\n",
__func__, __LINE__, ps3_result(result));
irq_dispose_mapping(virq);
pr_debug(" <- %s:%d\n", __func__, __LINE__);
return result;
}
int ps3_send_event_locally(unsigned int virq)
{
return lv1_send_event_locally(virq_to_hw(virq));
}
/**
* ps3_connect_event_irq - Assign a virq to a system bus device.
* @did: The HV device identifier read from the system repository.
* @interrupt_id: The device interrupt id read from the system repository.
* @virq: The assigned Linux virq.
*
* An event irq represents a virtual device interrupt. The interrupt_id
* coresponds to the software interrupt number.
*/
int ps3_connect_event_irq(const struct ps3_device_id *did,
unsigned int interrupt_id, unsigned int *virq)
{
int result;
result = ps3_alloc_event_irq(virq);
if (result)
return result;
result = lv1_connect_interrupt_event_receive_port(did->bus_id,
did->dev_id, virq_to_hw(*virq), interrupt_id);
if (result) {
pr_debug("%s:%d: lv1_connect_interrupt_event_receive_port"
" failed: %s\n", __func__, __LINE__,
ps3_result(result));
ps3_free_event_irq(*virq);
*virq = NO_IRQ;
return result;
}
pr_debug("%s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
interrupt_id, *virq);
return 0;
}
int ps3_disconnect_event_irq(const struct ps3_device_id *did,
unsigned int interrupt_id, unsigned int virq)
{
int result;
pr_debug(" -> %s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
interrupt_id, virq);
result = lv1_disconnect_interrupt_event_receive_port(did->bus_id,
did->dev_id, virq_to_hw(virq), interrupt_id);
if (result)
pr_debug("%s:%d: lv1_disconnect_interrupt_event_receive_port"
" failed: %s\n", __func__, __LINE__,
ps3_result(result));
ps3_free_event_irq(virq);
pr_debug(" <- %s:%d\n", __func__, __LINE__);
return result;
}
/**
* ps3_alloc_vuart_irq - Configure the system virtual uart virq.
* @virt_addr_bmp: The caller supplied virtual uart interrupt bitmap.
* @virq: The assigned Linux virq.
*
* The system supports only a single virtual uart, so multiple calls without
* freeing the interrupt will return a wrong state error.
*/
int ps3_alloc_vuart_irq(void* virt_addr_bmp, unsigned int *virq)
{
int result;
unsigned long outlet;
unsigned long lpar_addr;
BUG_ON(!is_kernel_addr((unsigned long)virt_addr_bmp));
lpar_addr = ps3_mm_phys_to_lpar(__pa(virt_addr_bmp));
result = lv1_configure_virtual_uart_irq(lpar_addr, &outlet);
if (result) {
pr_debug("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n",
__func__, __LINE__, ps3_result(result));
return result;
}
*virq = irq_create_mapping(NULL, outlet);
pr_debug("%s:%d: outlet %lu, virq %u\n", __func__, __LINE__,
outlet, *virq);
return 0;
}
int ps3_free_vuart_irq(unsigned int virq)
{
int result;
result = lv1_deconfigure_virtual_uart_irq();
if (result) {
pr_debug("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n",
__func__, __LINE__, ps3_result(result));
return result;
}
irq_dispose_mapping(virq);
return result;
}
/**
* ps3_alloc_spe_irq - Configure an spe virq.
* @spe_id: The spe_id returned from lv1_construct_logical_spe().
* @class: The spe interrupt class {0,1,2}.
* @virq: The assigned Linux virq.
*
*/
int ps3_alloc_spe_irq(unsigned long spe_id, unsigned int class,
unsigned int *virq)
{
int result;
unsigned long outlet;
BUG_ON(class > 2);
result = lv1_get_spe_irq_outlet(spe_id, class, &outlet);
if (result) {
pr_debug("%s:%d: lv1_get_spe_irq_outlet failed: %s\n",
__func__, __LINE__, ps3_result(result));
return result;
}
*virq = irq_create_mapping(NULL, outlet);
pr_debug("%s:%d: spe_id %lu, class %u, outlet %lu, virq %u\n",
__func__, __LINE__, spe_id, class, outlet, *virq);
return 0;
}
int ps3_free_spe_irq(unsigned int virq)
{
irq_dispose_mapping(virq);
return 0;
}
#define PS3_INVALID_OUTLET ((irq_hw_number_t)-1)
#define PS3_PLUG_MAX 63
/**
* struct bmp - a per cpu irq status and mask bitmap structure
* @status: 256 bit status bitmap indexed by plug
* @unused_1:
* @mask: 256 bit mask bitmap indexed by plug
* @unused_2:
* @lock:
* @ipi_debug_brk_mask:
*
* The HV mantains per SMT thread mappings of HV outlet to HV plug on
* behalf of the guest. These mappings are implemented as 256 bit guest
* supplied bitmaps indexed by plug number. The address of the bitmaps are
* registered with the HV through lv1_configure_irq_state_bitmap().
*
* The HV supports 256 plugs per thread, assigned as {0..255}, for a total
* of 512 plugs supported on a processor. To simplify the logic this
* implementation equates HV plug value to linux virq value, constrains each
* interrupt to have a system wide unique plug number, and limits the range
* of the plug values to map into the first dword of the bitmaps. This
* gives a usable range of plug values of {NUM_ISA_INTERRUPTS..63}. Note
* that there is no constraint on how many in this set an individual thread
* can aquire.
*/
struct bmp {
struct {
unsigned long status;
unsigned long unused_1[3];
unsigned long mask;
unsigned long unused_2[3];
} __attribute__ ((packed));
spinlock_t lock;
unsigned long ipi_debug_brk_mask;
};
/**
* struct private - a per cpu data structure
* @node: HV node id
* @cpu: HV thread id
* @bmp: an HV bmp structure
*/
struct private {
unsigned long node;
unsigned int cpu;
struct bmp bmp;
};
#if defined(DEBUG)
static void _dump_64_bmp(const char *header, const unsigned long *p, unsigned cpu,
const char* func, int line)
{
pr_debug("%s:%d: %s %u {%04lx_%04lx_%04lx_%04lx}\n",
func, line, header, cpu,
*p >> 48, (*p >> 32) & 0xffff, (*p >> 16) & 0xffff,
*p & 0xffff);
}
static void __attribute__ ((unused)) _dump_256_bmp(const char *header,
const unsigned long *p, unsigned cpu, const char* func, int line)
{
pr_debug("%s:%d: %s %u {%016lx:%016lx:%016lx:%016lx}\n",
func, line, header, cpu, p[0], p[1], p[2], p[3]);
}
#define dump_bmp(_x) _dump_bmp(_x, __func__, __LINE__)
static void _dump_bmp(struct private* pd, const char* func, int line)
{
unsigned long flags;
spin_lock_irqsave(&pd->bmp.lock, flags);
_dump_64_bmp("stat", &pd->bmp.status, pd->cpu, func, line);
_dump_64_bmp("mask", &pd->bmp.mask, pd->cpu, func, line);
spin_unlock_irqrestore(&pd->bmp.lock, flags);
}
#define dump_mask(_x) _dump_mask(_x, __func__, __LINE__)
static void __attribute__ ((unused)) _dump_mask(struct private* pd,
const char* func, int line)
{
unsigned long flags;
spin_lock_irqsave(&pd->bmp.lock, flags);
_dump_64_bmp("mask", &pd->bmp.mask, pd->cpu, func, line);
spin_unlock_irqrestore(&pd->bmp.lock, flags);
}
#else
static void dump_bmp(struct private* pd) {};
#endif /* defined(DEBUG) */
static void chip_mask(unsigned int virq)
{
unsigned long flags;
struct private *pd = get_irq_chip_data(virq);
pr_debug("%s:%d: cpu %u, virq %d\n", __func__, __LINE__, pd->cpu, virq);
BUG_ON(virq < NUM_ISA_INTERRUPTS);
BUG_ON(virq > PS3_PLUG_MAX);
spin_lock_irqsave(&pd->bmp.lock, flags);
pd->bmp.mask &= ~(0x8000000000000000UL >> virq);
spin_unlock_irqrestore(&pd->bmp.lock, flags);
lv1_did_update_interrupt_mask(pd->node, pd->cpu);
}
static void chip_unmask(unsigned int virq)
{
unsigned long flags;
struct private *pd = get_irq_chip_data(virq);
pr_debug("%s:%d: cpu %u, virq %d\n", __func__, __LINE__, pd->cpu, virq);
BUG_ON(virq < NUM_ISA_INTERRUPTS);
BUG_ON(virq > PS3_PLUG_MAX);
spin_lock_irqsave(&pd->bmp.lock, flags);
pd->bmp.mask |= (0x8000000000000000UL >> virq);
spin_unlock_irqrestore(&pd->bmp.lock, flags);
lv1_did_update_interrupt_mask(pd->node, pd->cpu);
}
static void chip_eoi(unsigned int virq)
{
lv1_end_of_interrupt(virq);
}
static struct irq_chip irq_chip = {
.typename = "ps3",
.mask = chip_mask,
.unmask = chip_unmask,
.eoi = chip_eoi,
};
static void host_unmap(struct irq_host *h, unsigned int virq)
{
int result;
pr_debug("%s:%d: virq %d\n", __func__, __LINE__, virq);
lv1_disconnect_irq_plug(virq);
result = set_irq_chip_data(virq, NULL);
BUG_ON(result);
}
static DEFINE_PER_CPU(struct private, private);
static int host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hwirq)
{
int result;
unsigned int cpu;
pr_debug(" -> %s:%d\n", __func__, __LINE__);
pr_debug("%s:%d: hwirq %lu => virq %u\n", __func__, __LINE__, hwirq,
virq);
/* bind this virq to a cpu */
preempt_disable();
cpu = smp_processor_id();
result = lv1_connect_irq_plug(virq, hwirq);
preempt_enable();
if (result) {
pr_info("%s:%d: lv1_connect_irq_plug failed:"
" %s\n", __func__, __LINE__, ps3_result(result));
return -EPERM;
}
result = set_irq_chip_data(virq, &per_cpu(private, cpu));
BUG_ON(result);
set_irq_chip_and_handler(virq, &irq_chip, handle_fasteoi_irq);
pr_debug(" <- %s:%d\n", __func__, __LINE__);
return result;
}
static struct irq_host_ops host_ops = {
.map = host_map,
.unmap = host_unmap,
};
void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq)
{
struct private *pd = &per_cpu(private, cpu);
pd->bmp.ipi_debug_brk_mask = 0x8000000000000000UL >> virq;
pr_debug("%s:%d: cpu %u, virq %u, mask %lxh\n", __func__, __LINE__,
cpu, virq, pd->bmp.ipi_debug_brk_mask);
}
static int bmp_get_and_clear_status_bit(struct bmp *m)
{
unsigned long flags;
unsigned int bit;
unsigned long x;
spin_lock_irqsave(&m->lock, flags);
/* check for ipi break first to stop this cpu ASAP */
if (m->status & m->ipi_debug_brk_mask) {
m->status &= ~m->ipi_debug_brk_mask;
spin_unlock_irqrestore(&m->lock, flags);
return __ilog2(m->ipi_debug_brk_mask);
}
x = (m->status & m->mask);
for (bit = NUM_ISA_INTERRUPTS, x <<= bit; x; bit++, x <<= 1)
if (x & 0x8000000000000000UL) {
m->status &= ~(0x8000000000000000UL >> bit);
spin_unlock_irqrestore(&m->lock, flags);
return bit;
}
spin_unlock_irqrestore(&m->lock, flags);
pr_debug("%s:%d: not found\n", __func__, __LINE__);
return -1;
}
unsigned int ps3_get_irq(void)
{
int plug;
struct private *pd = &__get_cpu_var(private);
plug = bmp_get_and_clear_status_bit(&pd->bmp);
if (plug < 1) {
pr_debug("%s:%d: no plug found: cpu %u\n", __func__, __LINE__,
pd->cpu);
dump_bmp(&per_cpu(private, 0));
dump_bmp(&per_cpu(private, 1));
return NO_IRQ;
}
#if defined(DEBUG)
if (plug < NUM_ISA_INTERRUPTS || plug > PS3_PLUG_MAX) {
dump_bmp(&per_cpu(private, 0));
dump_bmp(&per_cpu(private, 1));
BUG();
}
#endif
return plug;
}
void __init ps3_init_IRQ(void)
{
int result;
unsigned long node;
unsigned cpu;
struct irq_host *host;
lv1_get_logical_ppe_id(&node);
host = irq_alloc_host(IRQ_HOST_MAP_NOMAP, 0, &host_ops,
PS3_INVALID_OUTLET);
irq_set_default_host(host);
irq_set_virq_count(PS3_PLUG_MAX + 1);
for_each_possible_cpu(cpu) {
struct private *pd = &per_cpu(private, cpu);
pd->node = node;
pd->cpu = cpu;
spin_lock_init(&pd->bmp.lock);
result = lv1_configure_irq_state_bitmap(node, cpu,
ps3_mm_phys_to_lpar(__pa(&pd->bmp.status)));
if (result)
pr_debug("%s:%d: lv1_configure_irq_state_bitmap failed:"
" %s\n", __func__, __LINE__,
ps3_result(result));
}
ppc_md.get_irq = ps3_get_irq;
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册