提交 25fc530e 编写于 作者: O Olof Johansson 提交者: Paul Mackerras

[POWERPC] pasemi: PA6T oprofile support

Oprofile support for PA6T, kernel side.

Also rename the PA6T_SPRN.* defines to SPRN_PA6T.*.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
上级 7e8bddf5
......@@ -389,6 +389,8 @@ static struct cpu_spec cpu_specs[] = {
.pmc_type = PPC_PMC_PA6T,
.cpu_setup = __setup_cpu_pa6t,
.cpu_restore = __restore_cpu_pa6t,
.oprofile_cpu_type = "ppc64/pa6t",
.oprofile_type = PPC_OPROFILE_PA6T,
.platform = "pa6t",
},
{ /* default match */
......
......@@ -189,12 +189,12 @@ SYSFS_PMCSETUP(purr, SPRN_PURR);
SYSFS_PMCSETUP(spurr, SPRN_SPURR);
SYSFS_PMCSETUP(dscr, SPRN_DSCR);
SYSFS_PMCSETUP(pa6t_pmc0, PA6T_SPRN_PMC0);
SYSFS_PMCSETUP(pa6t_pmc1, PA6T_SPRN_PMC1);
SYSFS_PMCSETUP(pa6t_pmc2, PA6T_SPRN_PMC2);
SYSFS_PMCSETUP(pa6t_pmc3, PA6T_SPRN_PMC3);
SYSFS_PMCSETUP(pa6t_pmc4, PA6T_SPRN_PMC4);
SYSFS_PMCSETUP(pa6t_pmc5, PA6T_SPRN_PMC5);
SYSFS_PMCSETUP(pa6t_pmc0, SPRN_PA6T_PMC0);
SYSFS_PMCSETUP(pa6t_pmc1, SPRN_PA6T_PMC1);
SYSFS_PMCSETUP(pa6t_pmc2, SPRN_PA6T_PMC2);
SYSFS_PMCSETUP(pa6t_pmc3, SPRN_PA6T_PMC3);
SYSFS_PMCSETUP(pa6t_pmc4, SPRN_PA6T_PMC4);
SYSFS_PMCSETUP(pa6t_pmc5, SPRN_PA6T_PMC5);
static SYSDEV_ATTR(mmcra, 0600, show_mmcra, store_mmcra);
......
......@@ -12,6 +12,6 @@ DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \
oprofile-y := $(DRIVER_OBJS) common.o backtrace.o
oprofile-$(CONFIG_PPC_CELL_NATIVE) += op_model_cell.o
oprofile-$(CONFIG_PPC64) += op_model_rs64.o op_model_power4.o
oprofile-$(CONFIG_PPC64) += op_model_rs64.o op_model_power4.o op_model_pa6t.o
oprofile-$(CONFIG_FSL_BOOKE) += op_model_fsl_booke.o
oprofile-$(CONFIG_6xx) += op_model_7450.o
......@@ -160,6 +160,9 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
case PPC_OPROFILE_POWER4:
model = &op_model_power4;
break;
case PPC_OPROFILE_PA6T:
model = &op_model_pa6t;
break;
#endif
#ifdef CONFIG_6xx
case PPC_OPROFILE_G4:
......
/*
* Copyright (C) 2006-2007 PA Semi, Inc
*
* Author: Shashi Rao, PA Semi
*
* Maintained by: Olof Johansson <olof@lixom.net>
*
* Based on arch/powerpc/oprofile/op_model_power4.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/oprofile.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/percpu.h>
#include <asm/processor.h>
#include <asm/cputable.h>
#include <asm/oprofile_impl.h>
#include <asm/reg.h>
static unsigned char oprofile_running;
/* mmcr values are set in pa6t_reg_setup, used in pa6t_cpu_setup */
static u64 mmcr0_val;
static u64 mmcr1_val;
/* inited in pa6t_reg_setup */
static u64 reset_value[OP_MAX_COUNTER];
static inline u64 ctr_read(unsigned int i)
{
switch (i) {
case 0:
return mfspr(SPRN_PA6T_PMC0);
case 1:
return mfspr(SPRN_PA6T_PMC1);
case 2:
return mfspr(SPRN_PA6T_PMC2);
case 3:
return mfspr(SPRN_PA6T_PMC3);
case 4:
return mfspr(SPRN_PA6T_PMC4);
case 5:
return mfspr(SPRN_PA6T_PMC5);
default:
printk(KERN_ERR "ctr_read called with bad arg %u\n", i);
return 0;
}
}
static inline void ctr_write(unsigned int i, u64 val)
{
switch (i) {
case 0:
mtspr(SPRN_PA6T_PMC0, val);
break;
case 1:
mtspr(SPRN_PA6T_PMC1, val);
break;
case 2:
mtspr(SPRN_PA6T_PMC2, val);
break;
case 3:
mtspr(SPRN_PA6T_PMC3, val);
break;
case 4:
mtspr(SPRN_PA6T_PMC4, val);
break;
case 5:
mtspr(SPRN_PA6T_PMC5, val);
break;
default:
printk(KERN_ERR "ctr_write called with bad arg %u\n", i);
break;
}
}
/* precompute the values to stuff in the hardware registers */
static void pa6t_reg_setup(struct op_counter_config *ctr,
struct op_system_config *sys,
int num_ctrs)
{
int pmc;
/*
* adjust the mmcr0.en[0-5] and mmcr0.inten[0-5] values obtained from the
* event_mappings file by turning off the counters that the user doesn't
* care about
*
* setup user and kernel profiling
*/
for (pmc = 0; pmc < cur_cpu_spec->num_pmcs; pmc++)
if (!ctr[pmc].enabled) {
sys->mmcr0 &= ~(0x1UL << pmc);
sys->mmcr0 &= ~(0x1UL << (pmc+12));
pr_debug("turned off counter %u\n", pmc);
}
if (sys->enable_kernel)
sys->mmcr0 |= PA6T_MMCR0_SUPEN | PA6T_MMCR0_HYPEN;
else
sys->mmcr0 &= ~(PA6T_MMCR0_SUPEN | PA6T_MMCR0_HYPEN);
if (sys->enable_user)
sys->mmcr0 |= PA6T_MMCR0_PREN;
else
sys->mmcr0 &= ~PA6T_MMCR0_PREN;
/*
* The performance counter event settings are given in the mmcr0 and
* mmcr1 values passed from the user in the op_system_config
* structure (sys variable).
*/
mmcr0_val = sys->mmcr0;
mmcr1_val = sys->mmcr1;
pr_debug("mmcr0_val inited to %016lx\n", sys->mmcr0);
pr_debug("mmcr1_val inited to %016lx\n", sys->mmcr1);
for (pmc = 0; pmc < cur_cpu_spec->num_pmcs; pmc++) {
/* counters are 40 bit. Move to cputable at some point? */
reset_value[pmc] = (0x1UL << 39) - ctr[pmc].count;
pr_debug("reset_value for pmc%u inited to 0x%lx\n",
pmc, reset_value[pmc]);
}
}
/* configure registers on this cpu */
static void pa6t_cpu_setup(struct op_counter_config *ctr)
{
u64 mmcr0 = mmcr0_val;
u64 mmcr1 = mmcr1_val;
/* Default is all PMCs off */
mmcr0 &= ~(0x3FUL);
mtspr(SPRN_PA6T_MMCR0, mmcr0);
/* program selected programmable events in */
mtspr(SPRN_PA6T_MMCR1, mmcr1);
pr_debug("setup on cpu %d, mmcr0 %016lx\n", smp_processor_id(),
mfspr(SPRN_PA6T_MMCR0));
pr_debug("setup on cpu %d, mmcr1 %016lx\n", smp_processor_id(),
mfspr(SPRN_PA6T_MMCR1));
}
static void pa6t_start(struct op_counter_config *ctr)
{
int i;
/* Hold off event counting until rfid */
u64 mmcr0 = mmcr0_val | PA6T_MMCR0_HANDDIS;
for (i = 0; i < cur_cpu_spec->num_pmcs; i++)
if (ctr[i].enabled)
ctr_write(i, reset_value[i]);
else
ctr_write(i, 0UL);
mtspr(SPRN_PA6T_MMCR0, mmcr0);
oprofile_running = 1;
pr_debug("start on cpu %d, mmcr0 %lx\n", smp_processor_id(), mmcr0);
}
static void pa6t_stop(void)
{
u64 mmcr0;
/* freeze counters */
mmcr0 = mfspr(SPRN_PA6T_MMCR0);
mmcr0 |= PA6T_MMCR0_FCM0;
mtspr(SPRN_PA6T_MMCR0, mmcr0);
oprofile_running = 0;
pr_debug("stop on cpu %d, mmcr0 %lx\n", smp_processor_id(), mmcr0);
}
/* handle the perfmon overflow vector */
static void pa6t_handle_interrupt(struct pt_regs *regs,
struct op_counter_config *ctr)
{
unsigned long pc = mfspr(SPRN_PA6T_SIAR);
int is_kernel = is_kernel_addr(pc);
u64 val;
int i;
u64 mmcr0;
/* disable perfmon counting until rfid */
mmcr0 = mfspr(SPRN_PA6T_MMCR0);
mtspr(SPRN_PA6T_MMCR0, mmcr0 | PA6T_MMCR0_HANDDIS);
/* Record samples. We've got one global bit for whether a sample
* was taken, so add it for any counter that triggered overflow.
*/
for (i = 0; i < cur_cpu_spec->num_pmcs; i++) {
val = ctr_read(i);
if (val & (0x1UL << 39)) { /* Overflow bit set */
if (oprofile_running && ctr[i].enabled) {
if (mmcr0 & PA6T_MMCR0_SIARLOG)
oprofile_add_ext_sample(pc, regs, i, is_kernel);
ctr_write(i, reset_value[i]);
} else {
ctr_write(i, 0UL);
}
}
}
/* Restore mmcr0 to a good known value since the PMI changes it */
mmcr0 = mmcr0_val | PA6T_MMCR0_HANDDIS;
mtspr(SPRN_PA6T_MMCR0, mmcr0);
}
struct op_powerpc_model op_model_pa6t = {
.reg_setup = pa6t_reg_setup,
.cpu_setup = pa6t_cpu_setup,
.start = pa6t_start,
.stop = pa6t_stop,
.handle_interrupt = pa6t_handle_interrupt,
};
......@@ -48,6 +48,7 @@ enum powerpc_oprofile_type {
PPC_OPROFILE_G4 = 3,
PPC_OPROFILE_BOOKE = 4,
PPC_OPROFILE_CELL = 5,
PPC_OPROFILE_PA6T = 6,
};
enum powerpc_pmc_type {
......
......@@ -57,6 +57,8 @@ extern struct op_powerpc_model op_model_rs64;
extern struct op_powerpc_model op_model_power4;
extern struct op_powerpc_model op_model_7450;
extern struct op_powerpc_model op_model_cell;
extern struct op_powerpc_model op_model_pa6t;
/* All the classic PPC parts use these */
static inline unsigned int classic_ctr_read(unsigned int i)
......
......@@ -30,6 +30,7 @@ void release_pmc_hardware(void);
#ifdef CONFIG_PPC64
void power4_enable_pmcs(void);
void pasemi_enable_pmcs(void);
#endif
#endif /* __KERNEL__ */
......
......@@ -469,12 +469,68 @@
#define SPRN_SIAR 780
#define SPRN_SDAR 781
#define PA6T_SPRN_PMC0 787
#define PA6T_SPRN_PMC1 788
#define PA6T_SPRN_PMC2 789
#define PA6T_SPRN_PMC3 790
#define PA6T_SPRN_PMC4 791
#define PA6T_SPRN_PMC5 792
#define SPRN_PA6T_MMCR0 795
#define PA6T_MMCR0_EN0 0x0000000000000001UL
#define PA6T_MMCR0_EN1 0x0000000000000002UL
#define PA6T_MMCR0_EN2 0x0000000000000004UL
#define PA6T_MMCR0_EN3 0x0000000000000008UL
#define PA6T_MMCR0_EN4 0x0000000000000010UL
#define PA6T_MMCR0_EN5 0x0000000000000020UL
#define PA6T_MMCR0_SUPEN 0x0000000000000040UL
#define PA6T_MMCR0_PREN 0x0000000000000080UL
#define PA6T_MMCR0_HYPEN 0x0000000000000100UL
#define PA6T_MMCR0_FCM0 0x0000000000000200UL
#define PA6T_MMCR0_FCM1 0x0000000000000400UL
#define PA6T_MMCR0_INTGEN 0x0000000000000800UL
#define PA6T_MMCR0_INTEN0 0x0000000000001000UL
#define PA6T_MMCR0_INTEN1 0x0000000000002000UL
#define PA6T_MMCR0_INTEN2 0x0000000000004000UL
#define PA6T_MMCR0_INTEN3 0x0000000000008000UL
#define PA6T_MMCR0_INTEN4 0x0000000000010000UL
#define PA6T_MMCR0_INTEN5 0x0000000000020000UL
#define PA6T_MMCR0_DISCNT 0x0000000000040000UL
#define PA6T_MMCR0_UOP 0x0000000000080000UL
#define PA6T_MMCR0_TRG 0x0000000000100000UL
#define PA6T_MMCR0_TRGEN 0x0000000000200000UL
#define PA6T_MMCR0_TRGREG 0x0000000001600000UL
#define PA6T_MMCR0_SIARLOG 0x0000000002000000UL
#define PA6T_MMCR0_SDARLOG 0x0000000004000000UL
#define PA6T_MMCR0_PROEN 0x0000000008000000UL
#define PA6T_MMCR0_PROLOG 0x0000000010000000UL
#define PA6T_MMCR0_DAMEN2 0x0000000020000000UL
#define PA6T_MMCR0_DAMEN3 0x0000000040000000UL
#define PA6T_MMCR0_DAMEN4 0x0000000080000000UL
#define PA6T_MMCR0_DAMEN5 0x0000000100000000UL
#define PA6T_MMCR0_DAMSEL2 0x0000000200000000UL
#define PA6T_MMCR0_DAMSEL3 0x0000000400000000UL
#define PA6T_MMCR0_DAMSEL4 0x0000000800000000UL
#define PA6T_MMCR0_DAMSEL5 0x0000001000000000UL
#define PA6T_MMCR0_HANDDIS 0x0000002000000000UL
#define PA6T_MMCR0_PCTEN 0x0000004000000000UL
#define PA6T_MMCR0_SOCEN 0x0000008000000000UL
#define PA6T_MMCR0_SOCMOD 0x0000010000000000UL
#define SPRN_PA6T_MMCR1 798
#define PA6T_MMCR1_ES2 0x00000000000000ffUL
#define PA6T_MMCR1_ES3 0x000000000000ff00UL
#define PA6T_MMCR1_ES4 0x0000000000ff0000UL
#define PA6T_MMCR1_ES5 0x00000000ff000000UL
#define SPRN_PA6T_SIAR 780
#define SPRN_PA6T_UPMC0 771
#define SPRN_PA6T_UPMC1 772
#define SPRN_PA6T_UPMC2 773
#define SPRN_PA6T_UPMC3 774
#define SPRN_PA6T_UPMC4 775
#define SPRN_PA6T_UPMC5 776
#define SPRN_PA6T_UMMCR0 779
#define SPRN_PA6T_UMMCR1 782
#define SPRN_PA6T_PMC0 787
#define SPRN_PA6T_PMC1 788
#define SPRN_PA6T_PMC2 789
#define SPRN_PA6T_PMC3 790
#define SPRN_PA6T_PMC4 791
#define SPRN_PA6T_PMC5 792
#else /* 32-bit */
#define SPRN_MMCR0 952 /* Monitor Mode Control Register 0 */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册