提交 1d7aec30 编写于 作者: L Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: joydev - allow binding to button-only devices
  Input: elantech - ignore high bits in the position coordinates
  Input: elantech - allow forcing Elantech protocol
  Input: elantech - fix firmware version check
  Input: ati_remote - add some missing devices from lirc_atiusb
  Input: eeti_ts - cancel pending work when going to suspend
  Input: Add support of Synaptics Clickpad device
  Revert "Input: ALPS - add signature for HP Pavilion dm3 laptops"
  Input: psmouse - ignore parity error for basic protocols
......@@ -333,14 +333,14 @@ byte 0:
byte 1:
bit 7 6 5 4 3 2 1 0
x15 x14 x13 x12 x11 x10 x9 x8
. . . . . x10 x9 x8
byte 2:
bit 7 6 5 4 3 2 1 0
x7 x6 x5 x4 x4 x2 x1 x0
x15..x0 = absolute x value (horizontal)
x10..x0 = absolute x value (horizontal)
byte 3:
......@@ -350,14 +350,14 @@ byte 3:
byte 4:
bit 7 6 5 4 3 2 1 0
y15 y14 y13 y12 y11 y10 y8 y8
. . . . . . y9 y8
byte 5:
bit 7 6 5 4 3 2 1 0
y7 y6 y5 y4 y3 y2 y1 y0
y15..y0 = absolute y value (vertical)
y9..y0 = absolute y value (vertical)
4.2.2 Two finger touch
......
......@@ -929,6 +929,24 @@ static const struct input_device_id joydev_ids[] = {
.evbit = { BIT_MASK(EV_ABS) },
.absbit = { BIT_MASK(ABS_THROTTLE) },
},
{
.flags = INPUT_DEVICE_ID_MATCH_EVBIT |
INPUT_DEVICE_ID_MATCH_KEYBIT,
.evbit = { BIT_MASK(EV_KEY) },
.keybit = {[BIT_WORD(BTN_JOYSTICK)] = BIT_MASK(BTN_JOYSTICK) },
},
{
.flags = INPUT_DEVICE_ID_MATCH_EVBIT |
INPUT_DEVICE_ID_MATCH_KEYBIT,
.evbit = { BIT_MASK(EV_KEY) },
.keybit = { [BIT_WORD(BTN_GAMEPAD)] = BIT_MASK(BTN_GAMEPAD) },
},
{
.flags = INPUT_DEVICE_ID_MATCH_EVBIT |
INPUT_DEVICE_ID_MATCH_KEYBIT,
.evbit = { BIT_MASK(EV_KEY) },
.keybit = { [BIT_WORD(BTN_TRIGGER_HAPPY)] = BIT_MASK(BTN_TRIGGER_HAPPY) },
},
{ } /* Terminating entry */
};
......
......@@ -98,10 +98,12 @@
* Module and Version Information, Module Parameters
*/
#define ATI_REMOTE_VENDOR_ID 0x0bc7
#define ATI_REMOTE_PRODUCT_ID 0x004
#define LOLA_REMOTE_PRODUCT_ID 0x002
#define MEDION_REMOTE_PRODUCT_ID 0x006
#define ATI_REMOTE_VENDOR_ID 0x0bc7
#define LOLA_REMOTE_PRODUCT_ID 0x0002
#define LOLA2_REMOTE_PRODUCT_ID 0x0003
#define ATI_REMOTE_PRODUCT_ID 0x0004
#define NVIDIA_REMOTE_PRODUCT_ID 0x0005
#define MEDION_REMOTE_PRODUCT_ID 0x0006
#define DRIVER_VERSION "2.2.1"
#define DRIVER_AUTHOR "Torrey Hoffman <thoffman@arnor.net>"
......@@ -142,8 +144,10 @@ MODULE_PARM_DESC(repeat_delay, "Delay before sending repeats, default = 500 msec
#define err(format, arg...) printk(KERN_ERR format , ## arg)
static struct usb_device_id ati_remote_table[] = {
{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) },
{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA_REMOTE_PRODUCT_ID) },
{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA2_REMOTE_PRODUCT_ID) },
{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) },
{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, NVIDIA_REMOTE_PRODUCT_ID) },
{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, MEDION_REMOTE_PRODUCT_ID) },
{} /* Terminating entry */
};
......
......@@ -64,7 +64,6 @@ static const struct alps_model_info alps_model_data[] = {
{ { 0x62, 0x02, 0x14 }, 0xcf, 0xcf,
ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },
{ { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */
{ { 0x73, 0x02, 0x64 }, 0xf8, 0xf8, 0 }, /* HP Pavilion dm3 */
{ { 0x52, 0x01, 0x14 }, 0xff, 0xff,
ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, /* Toshiba Tecra A11-11L */
};
......
......@@ -25,6 +25,10 @@
printk(KERN_DEBUG format, ##arg); \
} while (0)
static bool force_elantech;
module_param_named(force_elantech, force_elantech, bool, 0644);
MODULE_PARM_DESC(force_elantech, "Force the Elantech PS/2 protocol extension to be used, 1 = enabled, 0 = disabled (default).");
/*
* Send a Synaptics style sliced query command
*/
......@@ -182,13 +186,17 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
static int old_fingers;
if (etd->fw_version_maj == 0x01) {
/* byte 0: D U p1 p2 1 p3 R L
byte 1: f 0 th tw x9 x8 y9 y8 */
/*
* byte 0: D U p1 p2 1 p3 R L
* byte 1: f 0 th tw x9 x8 y9 y8
*/
fingers = ((packet[1] & 0x80) >> 7) +
((packet[1] & 0x30) >> 4);
} else {
/* byte 0: n1 n0 p2 p1 1 p3 R L
byte 1: 0 0 0 0 x9 x8 y9 y8 */
/*
* byte 0: n1 n0 p2 p1 1 p3 R L
* byte 1: 0 0 0 0 x9 x8 y9 y8
*/
fingers = (packet[0] & 0xc0) >> 6;
}
......@@ -202,13 +210,15 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
input_report_key(dev, BTN_TOUCH, fingers != 0);
/* byte 2: x7 x6 x5 x4 x3 x2 x1 x0
byte 3: y7 y6 y5 y4 y3 y2 y1 y0 */
/*
* byte 2: x7 x6 x5 x4 x3 x2 x1 x0
* byte 3: y7 y6 y5 y4 y3 y2 y1 y0
*/
if (fingers) {
input_report_abs(dev, ABS_X,
((packet[1] & 0x0c) << 6) | packet[2]);
input_report_abs(dev, ABS_Y, ETP_YMAX_V1 -
(((packet[1] & 0x03) << 8) | packet[3]));
input_report_abs(dev, ABS_Y,
ETP_YMAX_V1 - (((packet[1] & 0x03) << 8) | packet[3]));
}
input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
......@@ -247,34 +257,47 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
switch (fingers) {
case 1:
/* byte 1: x15 x14 x13 x12 x11 x10 x9 x8
byte 2: x7 x6 x5 x4 x4 x2 x1 x0 */
input_report_abs(dev, ABS_X, (packet[1] << 8) | packet[2]);
/* byte 4: y15 y14 y13 y12 y11 y10 y8 y8
byte 5: y7 y6 y5 y4 y3 y2 y1 y0 */
input_report_abs(dev, ABS_Y, ETP_YMAX_V2 -
((packet[4] << 8) | packet[5]));
/*
* byte 1: . . . . . x10 x9 x8
* byte 2: x7 x6 x5 x4 x4 x2 x1 x0
*/
input_report_abs(dev, ABS_X,
((packet[1] & 0x07) << 8) | packet[2]);
/*
* byte 4: . . . . . . y9 y8
* byte 5: y7 y6 y5 y4 y3 y2 y1 y0
*/
input_report_abs(dev, ABS_Y,
ETP_YMAX_V2 - (((packet[4] & 0x03) << 8) | packet[5]));
break;
case 2:
/* The coordinate of each finger is reported separately with
a lower resolution for two finger touches */
/* byte 0: . . ay8 ax8 . . . .
byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0 */
/*
* The coordinate of each finger is reported separately
* with a lower resolution for two finger touches:
* byte 0: . . ay8 ax8 . . . .
* byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0
*/
x1 = ((packet[0] & 0x10) << 4) | packet[1];
/* byte 2: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 */
y1 = ETP_2FT_YMAX - (((packet[0] & 0x20) << 3) | packet[2]);
/* byte 3: . . by8 bx8 . . . .
byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0 */
/*
* byte 3: . . by8 bx8 . . . .
* byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0
*/
x2 = ((packet[3] & 0x10) << 4) | packet[4];
/* byte 5: by7 by8 by5 by4 by3 by2 by1 by0 */
y2 = ETP_2FT_YMAX - (((packet[3] & 0x20) << 3) | packet[5]);
/* For compatibility with the X Synaptics driver scale up one
coordinate and report as ordinary mouse movent */
/*
* For compatibility with the X Synaptics driver scale up
* one coordinate and report as ordinary mouse movent
*/
input_report_abs(dev, ABS_X, x1 << 2);
input_report_abs(dev, ABS_Y, y1 << 2);
/* For compatibility with the proprietary X Elantech driver
report both coordinates as hat coordinates */
/*
* For compatibility with the proprietary X Elantech driver
* report both coordinates as hat coordinates
*/
input_report_abs(dev, ABS_HAT0X, x1);
input_report_abs(dev, ABS_HAT0Y, y1);
input_report_abs(dev, ABS_HAT1X, x2);
......@@ -596,8 +619,12 @@ int elantech_detect(struct psmouse *psmouse, bool set_properties)
param[0], param[1], param[2]);
if (param[0] == 0 || param[1] != 0) {
pr_debug("elantech.c: Probably not a real Elantech touchpad. Aborting.\n");
return -1;
if (!force_elantech) {
pr_debug("elantech.c: Probably not a real Elantech touchpad. Aborting.\n");
return -1;
}
pr_debug("elantech.c: Probably not a real Elantech touchpad. Enabling anyway due to force_elantech.\n");
}
if (set_properties) {
......@@ -666,7 +693,8 @@ int elantech_init(struct psmouse *psmouse)
* Assume every version greater than this is new EeePC style
* hardware with 6 byte packets
*/
if (etd->fw_version_maj >= 0x02 && etd->fw_version_min >= 0x30) {
if ((etd->fw_version_maj == 0x02 && etd->fw_version_min >= 0x30) ||
etd->fw_version_maj > 0x02) {
etd->hw_version = 2;
/* For now show extra debug information */
etd->debug = 1;
......
......@@ -110,6 +110,7 @@ static struct workqueue_struct *kpsmoused_wq;
struct psmouse_protocol {
enum psmouse_type type;
bool maxproto;
bool ignore_parity; /* Protocol should ignore parity errors from KBC */
const char *name;
const char *alias;
int (*detect)(struct psmouse *, bool);
......@@ -288,7 +289,9 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
if (psmouse->state == PSMOUSE_IGNORE)
goto out;
if (flags & (SERIO_PARITY|SERIO_TIMEOUT)) {
if (unlikely((flags & SERIO_TIMEOUT) ||
((flags & SERIO_PARITY) && !psmouse->ignore_parity))) {
if (psmouse->state == PSMOUSE_ACTIVATED)
printk(KERN_WARNING "psmouse.c: bad data from KBC -%s%s\n",
flags & SERIO_TIMEOUT ? " timeout" : "",
......@@ -759,6 +762,7 @@ static const struct psmouse_protocol psmouse_protocols[] = {
.name = "PS/2",
.alias = "bare",
.maxproto = true,
.ignore_parity = true,
.detect = ps2bare_detect,
},
#ifdef CONFIG_MOUSE_PS2_LOGIPS2PP
......@@ -786,6 +790,7 @@ static const struct psmouse_protocol psmouse_protocols[] = {
.name = "ImPS/2",
.alias = "imps",
.maxproto = true,
.ignore_parity = true,
.detect = intellimouse_detect,
},
{
......@@ -793,6 +798,7 @@ static const struct psmouse_protocol psmouse_protocols[] = {
.name = "ImExPS/2",
.alias = "exps",
.maxproto = true,
.ignore_parity = true,
.detect = im_explorer_detect,
},
#ifdef CONFIG_MOUSE_PS2_SYNAPTICS
......@@ -1222,6 +1228,7 @@ static void psmouse_disconnect(struct serio *serio)
static int psmouse_switch_protocol(struct psmouse *psmouse,
const struct psmouse_protocol *proto)
{
const struct psmouse_protocol *selected_proto;
struct input_dev *input_dev = psmouse->dev;
input_dev->dev.parent = &psmouse->ps2dev.serio->dev;
......@@ -1245,9 +1252,14 @@ static int psmouse_switch_protocol(struct psmouse *psmouse,
return -1;
psmouse->type = proto->type;
} else
selected_proto = proto;
} else {
psmouse->type = psmouse_extensions(psmouse,
psmouse_max_proto, true);
selected_proto = psmouse_protocol_by_type(psmouse->type);
}
psmouse->ignore_parity = selected_proto->ignore_parity;
/*
* If mouse's packet size is 3 there is no point in polling the
......@@ -1267,7 +1279,7 @@ static int psmouse_switch_protocol(struct psmouse *psmouse,
psmouse->resync_time = 0;
snprintf(psmouse->devname, sizeof(psmouse->devname), "%s %s %s",
psmouse_protocol_by_type(psmouse->type)->name, psmouse->vendor, psmouse->name);
selected_proto->name, psmouse->vendor, psmouse->name);
input_dev->name = psmouse->devname;
input_dev->phys = psmouse->phys;
......
......@@ -47,6 +47,7 @@ struct psmouse {
unsigned char pktcnt;
unsigned char pktsize;
unsigned char type;
bool ignore_parity;
bool acks_disable_command;
unsigned int model;
unsigned long last;
......
......@@ -137,7 +137,8 @@ static int synaptics_capability(struct psmouse *psmouse)
if (synaptics_send_cmd(psmouse, SYN_QUE_CAPABILITIES, cap))
return -1;
priv->capabilities = (cap[0] << 16) | (cap[1] << 8) | cap[2];
priv->ext_cap = 0;
priv->ext_cap = priv->ext_cap_0c = 0;
if (!SYN_CAP_VALID(priv->capabilities))
return -1;
......@@ -150,7 +151,7 @@ static int synaptics_capability(struct psmouse *psmouse)
if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 1) {
if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB, cap)) {
printk(KERN_ERR "Synaptics claims to have extended capabilities,"
" but I'm not able to read them.");
" but I'm not able to read them.\n");
} else {
priv->ext_cap = (cap[0] << 16) | (cap[1] << 8) | cap[2];
......@@ -162,6 +163,16 @@ static int synaptics_capability(struct psmouse *psmouse)
priv->ext_cap &= 0xff0fff;
}
}
if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 4) {
if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB_0C, cap)) {
printk(KERN_ERR "Synaptics claims to have extended capability 0x0c,"
" but I'm not able to read it.\n");
} else {
priv->ext_cap_0c = (cap[0] << 16) | (cap[1] << 8) | cap[2];
}
}
return 0;
}
......@@ -348,7 +359,15 @@ static void synaptics_parse_hw_state(unsigned char buf[], struct synaptics_data
hw->left = (buf[0] & 0x01) ? 1 : 0;
hw->right = (buf[0] & 0x02) ? 1 : 0;
if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) {
if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
/*
* Clickpad's button is transmitted as middle button,
* however, since it is primary button, we will report
* it as BTN_LEFT.
*/
hw->left = ((buf[0] ^ buf[3]) & 0x01) ? 1 : 0;
} else if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) {
hw->middle = ((buf[0] ^ buf[3]) & 0x01) ? 1 : 0;
if (hw->w == 2)
hw->scroll = (signed char)(buf[1]);
......@@ -593,6 +612,12 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
dev->absres[ABS_X] = priv->x_res;
dev->absres[ABS_Y] = priv->y_res;
if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
/* Clickpads report only left button */
__clear_bit(BTN_RIGHT, dev->keybit);
__clear_bit(BTN_MIDDLE, dev->keybit);
}
}
static void synaptics_disconnect(struct psmouse *psmouse)
......@@ -697,10 +722,10 @@ int synaptics_init(struct psmouse *psmouse)
priv->pkt_type = SYN_MODEL_NEWABS(priv->model_id) ? SYN_NEWABS : SYN_OLDABS;
printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx\n",
printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx\n",
SYN_ID_MODEL(priv->identity),
SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity),
priv->model_id, priv->capabilities, priv->ext_cap);
priv->model_id, priv->capabilities, priv->ext_cap, priv->ext_cap_0c);
set_input_params(psmouse->dev, priv);
......
......@@ -18,6 +18,7 @@
#define SYN_QUE_SERIAL_NUMBER_SUFFIX 0x07
#define SYN_QUE_RESOLUTION 0x08
#define SYN_QUE_EXT_CAPAB 0x09
#define SYN_QUE_EXT_CAPAB_0C 0x0c
/* synatics modes */
#define SYN_BIT_ABSOLUTE_MODE (1 << 7)
......@@ -48,6 +49,8 @@
#define SYN_CAP_VALID(c) ((((c) & 0x00ff00) >> 8) == 0x47)
#define SYN_EXT_CAP_REQUESTS(c) (((c) & 0x700000) >> 20)
#define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) & 0x00f000) >> 12)
#define SYN_CAP_PRODUCT_ID(ec) (((ec) & 0xff0000) >> 16)
#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100100)
/* synaptics modes query bits */
#define SYN_MODE_ABSOLUTE(m) ((m) & (1 << 7))
......@@ -96,6 +99,7 @@ struct synaptics_data {
unsigned long int model_id; /* Model-ID */
unsigned long int capabilities; /* Capabilities */
unsigned long int ext_cap; /* Extended Capabilities */
unsigned long int ext_cap_0c; /* Ext Caps from 0x0c query */
unsigned long int identity; /* Identification */
int x_res; /* X resolution in units/mm */
int y_res; /* Y resolution in units/mm */
......
......@@ -124,14 +124,25 @@ static irqreturn_t eeti_ts_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
static int eeti_ts_open(struct input_dev *dev)
static void eeti_ts_start(struct eeti_ts_priv *priv)
{
struct eeti_ts_priv *priv = input_get_drvdata(dev);
enable_irq(priv->irq);
/* Read the events once to arm the IRQ */
eeti_ts_read(&priv->work);
}
static void eeti_ts_stop(struct eeti_ts_priv *priv)
{
disable_irq(priv->irq);
cancel_work_sync(&priv->work);
}
static int eeti_ts_open(struct input_dev *dev)
{
struct eeti_ts_priv *priv = input_get_drvdata(dev);
eeti_ts_start(priv);
return 0;
}
......@@ -140,8 +151,7 @@ static void eeti_ts_close(struct input_dev *dev)
{
struct eeti_ts_priv *priv = input_get_drvdata(dev);
disable_irq(priv->irq);
cancel_work_sync(&priv->work);
eeti_ts_stop(priv);
}
static int __devinit eeti_ts_probe(struct i2c_client *client,
......@@ -153,10 +163,12 @@ static int __devinit eeti_ts_probe(struct i2c_client *client,
unsigned int irq_flags;
int err = -ENOMEM;
/* In contrast to what's described in the datasheet, there seems
/*
* In contrast to what's described in the datasheet, there seems
* to be no way of probing the presence of that device using I2C
* commands. So we need to blindly believe it is there, and wait
* for interrupts to occur. */
* for interrupts to occur.
*/
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv) {
......@@ -212,9 +224,11 @@ static int __devinit eeti_ts_probe(struct i2c_client *client,
goto err2;
}
/* Disable the irq for now. It will be enabled once the input device
* is opened. */
disable_irq(priv->irq);
/*
* Disable the device for now. It will be enabled once the
* input device is opened.
*/
eeti_ts_stop(priv);
device_init_wakeup(&client->dev, 0);
return 0;
......@@ -235,6 +249,12 @@ static int __devexit eeti_ts_remove(struct i2c_client *client)
struct eeti_ts_priv *priv = i2c_get_clientdata(client);
free_irq(priv->irq, priv);
/*
* eeti_ts_stop() leaves IRQ disabled. We need to re-enable it
* so that device still works if we reload the driver.
*/
enable_irq(priv->irq);
input_unregister_device(priv->input);
i2c_set_clientdata(client, NULL);
kfree(priv);
......@@ -246,6 +266,14 @@ static int __devexit eeti_ts_remove(struct i2c_client *client)
static int eeti_ts_suspend(struct i2c_client *client, pm_message_t mesg)
{
struct eeti_ts_priv *priv = i2c_get_clientdata(client);
struct input_dev *input_dev = priv->input;
mutex_lock(&input_dev->mutex);
if (input_dev->users)
eeti_ts_stop(priv);
mutex_unlock(&input_dev->mutex);
if (device_may_wakeup(&client->dev))
enable_irq_wake(priv->irq);
......@@ -256,10 +284,18 @@ static int eeti_ts_suspend(struct i2c_client *client, pm_message_t mesg)
static int eeti_ts_resume(struct i2c_client *client)
{
struct eeti_ts_priv *priv = i2c_get_clientdata(client);
struct input_dev *input_dev = priv->input;
if (device_may_wakeup(&client->dev))
disable_irq_wake(priv->irq);
mutex_lock(&input_dev->mutex);
if (input_dev->users)
eeti_ts_start(priv);
mutex_unlock(&input_dev->mutex);
return 0;
}
#else
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册