Skip to content

L
linux

xiphi1978 / linux

通知 2
Star 0
Fork 0
L
linux

体验新版 GitCode，发现更多精彩内容 >>

提交 1d3c6ff4 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm 

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (224 commits)
  ARM: remove 'select GENERIC_TIME'
  ARM: 6136/1: ARCH_REQUIRE_GPIOLIB selects GENERIC_GPIO
  ARM: 6074/1: oprofile: convert from sysdev to platform device
  ARM: 6073/1: oprofile: remove old files and update KConfig
  ARM: 6072/1: oprofile: use perf-events framework as backend
  ARM: 6071/1: perf-events: allow modules to query the number of hardware counters
  ARM: 6070/1: perf-events: add support for xscale PMUs
  ARM: 6069/1: perf-events: use numeric ID to identify PMU
  ARM: 6064/1: pmu: register IRQs at runtime
  ARM: Optionally allow ARMv6 to use 'normal, bufferable' memory for DMA
  ARM: 6134/1: Handle instruction cache maintenance fault properly
  ARM: nwfpe: allow debugging output to be configured at runtime
  ARM: rename mach_cpu_disable() to platform_cpu_disable()
  ARM: 6132/1: PL330: Add common core driver
  ARM: 6094/1: Extend cache-l2x0 to support the 16-way PL310
  ARM: Move memory mapping into mmu.c
  ARM: Ensure meminfo is sorted prior to sanity_check_meminfo
  ARM: Remove useless linux/bootmem.h includes
  ARM: convert /proc/cpu/aligment to seq_file
  arm: use asm-generic/scatterlist.h
  ...
上级 7c7cbaf5 717e7c26
展开全部 隐藏空白更改
内联 并排
Showing with 28153 addition and 8039 deletion
Documentation/arm/00-INDEX
浏览文件 @ 1d3c6ff4
......@@ -20,6 +20,8 @@ Samsung-S3C24XX
- S3C24XX ARM Linux Overview
Sharp-LH
- Linux on Sharp LH79524 and LH7A40X System On a Chip (SOC)
SPEAr
- ST SPEAr platform Linux Overview
VFP/
- Release notes for Linux Kernel Vector Floating Point support code
empeg/
......
Documentation/arm/SPEAr/overview.txt 0 → 100644
浏览文件 @ 1d3c6ff4
SPEAr ARM Linux Overview
==========================
Introduction
------------
SPEAr (Structured Processor Enhanced Architecture).
weblink : http://www.st.com/spear
The ST Microelectronics SPEAr range of ARM9/CortexA9 System-on-Chip CPUs are
supported by the 'spear' platform of ARM Linux. Currently SPEAr300,
SPEAr310, SPEAr320 and SPEAr600 SOCs are supported. Support for the SPEAr13XX
series is in progress.
Hierarchy in SPEAr is as follows:
SPEAr (Platform)
- SPEAr3XX (3XX SOC series, based on ARM9)
- SPEAr300 (SOC)
- SPEAr300_EVB (Evaluation Board)
- SPEAr310 (SOC)
- SPEAr310_EVB (Evaluation Board)
- SPEAr320 (SOC)
- SPEAr320_EVB (Evaluation Board)
- SPEAr6XX (6XX SOC series, based on ARM9)
- SPEAr600 (SOC)
- SPEAr600_EVB (Evaluation Board)
- SPEAr13XX (13XX SOC series, based on ARM CORTEXA9)
- SPEAr1300 (SOC)
Configuration
-------------
A generic configuration is provided for each machine, and can be used as the
default by
make spear600_defconfig
make spear300_defconfig
make spear310_defconfig
make spear320_defconfig
Layout
------
The common files for multiple machine families (SPEAr3XX, SPEAr6XX and
SPEAr13XX) are located in the platform code contained in arch/arm/plat-spear
with headers in plat/.
Each machine series have a directory with name arch/arm/mach-spear followed by
series name. Like mach-spear3xx, mach-spear6xx and mach-spear13xx.
Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for
spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine
specific files, like spear300.c, spear310.c, spear320.c and spear600.c.
mach-spear* also contains board specific files for each machine type.
Document Author
---------------
Viresh Kumar, (c) 2010 ST Microelectronics
Documentation/feature-removal-schedule.txt
浏览文件 @ 1d3c6ff4
......@@ -520,29 +520,6 @@ Who: Hans de Goede <hdegoede@redhat.com>
----------------------------
What: corgikbd, spitzkbd, tosakbd driver
When: 2.6.35
Files: drivers/input/keyboard/{corgi,spitz,tosa}kbd.c
Why: We now have a generic GPIO based matrix keyboard driver that
are fully capable of handling all the keys on these devices.
The original drivers manipulate the GPIO registers directly
and so are difficult to maintain.
Who: Eric Miao <eric.y.miao@gmail.com>
----------------------------
What: corgi_ssp and corgi_ts driver
When: 2.6.35
Files: arch/arm/mach-pxa/corgi_ssp.c, drivers/input/touchscreen/corgi_ts.c
Why: The corgi touchscreen is now deprecated in favour of the generic
ads7846.c driver. The noise reduction technique used in corgi_ts.c,
that's to wait till vsync before ADC sampling, is also integrated into
ads7846 driver now. Provided that the original driver is not generic
and is difficult to maintain, it will be removed later.
Who: Eric Miao <eric.y.miao@gmail.com>
----------------------------
What: capifs
When: February 2011
Files: drivers/isdn/capi/capifs.*
......
MAINTAINERS
浏览文件 @ 1d3c6ff4
......@@ -586,6 +586,12 @@ F: drivers/mtd/nand/bcm_umi_bch.c
F: drivers/mtd/nand/bcm_umi_hamming.c
F: drivers/mtd/nand/nand_bcm_umi.h
ARM/CAVIUM NETWORKS CNS3XXX MACHINE SUPPORT
M: Anton Vorontsov <avorontsov@mvista.com>
S: Maintained
F: arch/arm/mach-cns3xxx/
T: git git://git.infradead.org/users/cbou/linux-cns3xxx.git
ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
M: Hartley Sweeten <hsweeten@visionengravers.com>
M: Ryan Mallon <ryan@bluewatersys.com>
......@@ -775,11 +781,10 @@ M: Philipp Zabel <philipp.zabel@gmail.com>
S: Maintained
ARM/Marvell Loki/Kirkwood/MV78xx0/Orion SOC support
M: Lennert Buytenhek <buytenh@marvell.com>
M: Nicolas Pitre <nico@marvell.com>
M: Lennert Buytenhek <kernel@wantstofly.org>
M: Nicolas Pitre <nico@fluxnic.net>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://git.marvell.com/orion
S: Maintained
S: Odd Fixes
F: arch/arm/mach-loki/
F: arch/arm/mach-kirkwood/
F: arch/arm/mach-mv78xx0/
......@@ -994,6 +999,20 @@ W: http://www.arm.linux.org.uk/
S: Maintained
F: arch/arm/vfp/
ARM/VOIPAC PXA270 SUPPORT
M: Marek Vasut <marek.vasut@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-pxa/vpac270.c
F: arch/arm/mach-pxa/include/mach-pxa/vpac270.h
ARM/ZIPIT Z2 SUPPORT
M: Marek Vasut <marek.vasut@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-pxa/z2.c
F: arch/arm/mach-pxa/include/mach-pxa/z2.h
ASC7621 HARDWARE MONITOR DRIVER
M: George Joseph <george.joseph@fairview5.com>
L: lm-sensors@lm-sensors.org
......@@ -3635,7 +3654,8 @@ F: drivers/net/wireless/mwl8k.c
MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER
M: Nicolas Pitre <nico@fluxnic.net>
S: Maintained
S: Odd Fixes
F: drivers/mmc/host/mvsdio.*
MARVELL YUKON / SYSKONNECT DRIVER
M: Mirko Lindner <mlindner@syskonnect.de>
......@@ -5133,7 +5153,7 @@ F: mm/sl?b.c
SMC91x ETHERNET DRIVER
M: Nicolas Pitre <nico@fluxnic.net>
S: Maintained
S: Odd Fixes
F: drivers/net/smc91x.*
SMSC47B397 HARDWARE MONITOR DRIVER
......@@ -5264,6 +5284,46 @@ F: drivers/serial/sunsu.c
F: drivers/serial/sunzilog.c
F: drivers/serial/sunzilog.h
SPEAR PLATFORM SUPPORT
M: Viresh Kumar <viresh.kumar@st.com>
W: http://www.st.com/spear
S: Maintained
F: arch/arm/plat-spear/
SPEAR3XX MACHINE SUPPORT
M: Viresh Kumar <viresh.kumar@st.com>
W: http://www.st.com/spear
S: Maintained
F: arch/arm/mach-spear3xx/
SPEAR6XX MACHINE SUPPORT
M: Rajeev Kumar <rajeev-dlh.kumar@st.com>
W: http://www.st.com/spear
S: Maintained
F: arch/arm/mach-spear6xx/
SPEAR CLOCK FRAMEWORK SUPPORT
M: Viresh Kumar <viresh.kumar@st.com>
W: http://www.st.com/spear
S: Maintained
F: arch/arm/mach-spear*/clock.c
F: arch/arm/mach-spear*/include/mach/clkdev.h
F: arch/arm/plat-spear/clock.c
F: arch/arm/plat-spear/include/plat/clock.h and clkdev.h
SPEAR PAD MULTIPLEXING SUPPORT
M: Viresh Kumar <viresh.kumar@st.com>
W: http://www.st.com/spear
S: Maintained
F: arch/arm/plat-spear/include/plat/padmux.h
F: arch/arm/plat-spear/padmux.c
F: arch/arm/mach-spear*/spear*xx.c
F: arch/arm/mach-spear*/include/mach/generic.h
F: arch/arm/mach-spear3xx/spear3*0.c
F: arch/arm/mach-spear3xx/spear3*0_evb.c
F: arch/arm/mach-spear6xx/spear600.c
F: arch/arm/mach-spear6xx/spear600_evb.c
SPECIALIX IO8+ MULTIPORT SERIAL CARD DRIVER
M: Roger Wolff <R.E.Wolff@BitWizard.nl>
S: Supported
......
arch/arm/Kconfig
浏览文件 @ 1d3c6ff4
......@@ -13,7 +13,7 @@ config ARM
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
select GENERIC_ATOMIC64 if (!CPU_32v6K)
select HAVE_OPROFILE
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_ARCH_KGDB
select HAVE_KPROBES if (!XIP_KERNEL)
select HAVE_KRETPROBES if (HAVE_KPROBES)
......@@ -21,6 +21,7 @@ config ARM
select HAVE_GENERIC_DMA_COHERENT
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZO
select HAVE_KERNEL_LZMA
select HAVE_PERF_EVENTS
select PERF_USE_VMALLOC
help
......@@ -42,6 +43,11 @@ config GENERIC_GPIO
config GENERIC_TIME
bool
default y
config ARCH_USES_GETTIMEOFFSET
bool
default n
config GENERIC_CLOCKEVENTS
bool
......@@ -175,28 +181,6 @@ config ARM_L1_CACHE_SHIFT_6
help
Setting ARM L1 cache line size to 64 Bytes.
if OPROFILE
config OPROFILE_ARMV6
def_bool y
depends on CPU_V6 && !SMP
select OPROFILE_ARM11_CORE
config OPROFILE_MPCORE
def_bool y
depends on CPU_V6 && SMP
select OPROFILE_ARM11_CORE
config OPROFILE_ARM11_CORE
bool
config OPROFILE_ARMV7
def_bool y
depends on CPU_V7 && !SMP
bool
endif
config VECTORS_BASE
hex
default 0xffff0000 if MMU || CPU_HIGH_VECTOR
......@@ -231,6 +215,7 @@ config ARCH_AAEC2000
select CPU_ARM920T
select ARM_AMBA
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
help
This enables support for systems based on the Agilent AAEC-2000
......@@ -238,21 +223,22 @@ config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
select ARM_AMBA
select ARCH_HAS_CPUFREQ
select HAVE_CLK
select COMMON_CLKDEV
select ICST525
select ICST
select GENERIC_CLOCKEVENTS
select PLAT_VERSATILE
help
Support for ARM's Integrator platform.
config ARCH_REALVIEW
bool "ARM Ltd. RealView family"
select ARM_AMBA
select HAVE_CLK
select COMMON_CLKDEV
select ICST307
select GENERIC_TIME
select ICST
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
select PLAT_VERSATILE
select ARM_TIMER_SP804
select GPIO_PL061 if GPIOLIB
help
This enables support for ARM Ltd RealView boards.
......@@ -261,20 +247,33 @@ config ARCH_VERSATILE
bool "ARM Ltd. Versatile family"
select ARM_AMBA
select ARM_VIC
select HAVE_CLK
select COMMON_CLKDEV
select ICST307
select GENERIC_TIME
select ICST
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
select PLAT_VERSATILE
select ARM_TIMER_SP804
help
This enables support for ARM Ltd Versatile board.
config ARCH_VEXPRESS
bool "ARM Ltd. Versatile Express family"
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_AMBA
select ARM_TIMER_SP804
select COMMON_CLKDEV
select GENERIC_CLOCKEVENTS
select HAVE_CLK
select ICST
select PLAT_VERSATILE
help
This enables support for the ARM Ltd Versatile Express boards.
config ARCH_AT91
bool "Atmel AT91"
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
help
This enables support for systems based on the Atmel AT91RM9200,
AT91SAM9 and AT91CAP9 processors.
......@@ -285,7 +284,6 @@ config ARCH_BCMRING
select CPU_V6
select ARM_AMBA
select COMMON_CLKDEV
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
help
......@@ -294,14 +292,23 @@ config ARCH_BCMRING
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x-based"
select CPU_ARM720T
select ARCH_USES_GETTIMEOFFSET
help
Support for Cirrus Logic 711x/721x based boards.
config ARCH_CNS3XXX
bool "Cavium Networks CNS3XXX family"
select CPU_V6
select GENERIC_CLOCKEVENTS
select ARM_GIC
help
Support for Cavium Networks CNS3XXX platform.
config ARCH_GEMINI
bool "Cortina Systems Gemini"
select CPU_FA526
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select ARCH_USES_GETTIMEOFFSET
help
Support for the Cortina Systems Gemini family SoCs
......@@ -310,6 +317,7 @@ config ARCH_EBSA110
select CPU_SA110
select ISA
select NO_IOPORT
select ARCH_USES_GETTIMEOFFSET
help
This is an evaluation board for the StrongARM processor available
from Digital. It has limited hardware on-board, including an
......@@ -321,11 +329,10 @@ config ARCH_EP93XX
select CPU_ARM920T
select ARM_AMBA
select ARM_VIC
select GENERIC_GPIO
select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_USES_GETTIMEOFFSET
help
This enables support for the Cirrus EP93xx series of CPUs.
......@@ -333,16 +340,15 @@ config ARCH_FOOTBRIDGE
bool "FootBridge"
select CPU_SA110
select FOOTBRIDGE
select ARCH_USES_GETTIMEOFFSET
help
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
config ARCH_MXC
bool "Freescale MXC/iMX-based"
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select COMMON_CLKDEV
help
Support for Freescale MXC/iMX-based family of processors
......@@ -350,12 +356,9 @@ config ARCH_MXC
config ARCH_STMP3XXX
bool "Freescale STMP3xxx"
select CPU_ARM926T
select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select USB_ARCH_HAS_EHCI
help
Support for systems based on the Freescale 3xxx CPUs.
......@@ -365,7 +368,6 @@ config ARCH_NETX
select CPU_ARM926T
select ARM_VIC
select GENERIC_CLOCKEVENTS
select GENERIC_TIME
help
This enables support for systems based on the Hilscher NetX Soc
......@@ -373,6 +375,7 @@ config ARCH_H720X
bool "Hynix HMS720x-based"
select CPU_ARM720T
select ISA_DMA_API
select ARCH_USES_GETTIMEOFFSET
help
This enables support for systems based on the Hynix HMS720x
......@@ -393,7 +396,6 @@ config ARCH_IOP32X
select CPU_XSCALE
select PLAT_IOP
select PCI
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
Support for Intel's 80219 and IOP32X (XScale) family of
......@@ -405,7 +407,6 @@ config ARCH_IOP33X
select CPU_XSCALE
select PLAT_IOP
select PCI
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
Support for Intel's IOP33X (XScale) family of processors.
......@@ -415,6 +416,7 @@ config ARCH_IXP23XX
depends on MMU
select CPU_XSC3
select PCI
select ARCH_USES_GETTIMEOFFSET
help
Support for Intel's IXP23xx (XScale) family of processors.
......@@ -423,6 +425,7 @@ config ARCH_IXP2000
depends on MMU
select CPU_XSCALE
select PCI
select ARCH_USES_GETTIMEOFFSET
help
Support for Intel's IXP2400/2800 (XScale) family of processors.
......@@ -431,7 +434,6 @@ config ARCH_IXP4XX
depends on MMU
select CPU_XSCALE
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select DMABOUNCE if PCI
help
......@@ -441,6 +443,7 @@ config ARCH_L7200
bool "LinkUp-L7200"
select CPU_ARM720T
select FIQ
select ARCH_USES_GETTIMEOFFSET
help
Say Y here if you intend to run this kernel on a LinkUp Systems
L7200 Software Development Board which uses an ARM720T processor.
......@@ -454,9 +457,7 @@ config ARCH_L7200
config ARCH_DOVE
bool "Marvell Dove"
select PCI
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
help
......@@ -466,9 +467,7 @@ config ARCH_KIRKWOOD
bool "Marvell Kirkwood"
select CPU_FEROCEON
select PCI
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
help
......@@ -478,7 +477,6 @@ config ARCH_KIRKWOOD
config ARCH_LOKI
bool "Marvell Loki (88RC8480)"
select CPU_FEROCEON
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
help
......@@ -488,9 +486,7 @@ config ARCH_MV78XX0
bool "Marvell MV78xx0"
select CPU_FEROCEON
select PCI
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
help
......@@ -502,9 +498,7 @@ config ARCH_ORION5X
depends on MMU
select CPU_FEROCEON
select PCI
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
help
......@@ -515,11 +509,8 @@ config ARCH_ORION5X
config ARCH_MMP
bool "Marvell PXA168/910/MMP2"
depends on MMU
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select COMMON_CLKDEV
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
select PLAT_PXA
......@@ -529,8 +520,8 @@ config ARCH_MMP
config ARCH_KS8695
bool "Micrel/Kendin KS8695"
select CPU_ARM922T
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select ARCH_REQUIRE_GPIOLIB
select ARCH_USES_GETTIMEOFFSET
help
Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
System-on-Chip devices.
......@@ -539,7 +530,6 @@ config ARCH_NS9XXX
bool "NetSilicon NS9xxx"
select CPU_ARM926T
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_CLK
help
......@@ -552,10 +542,7 @@ config ARCH_W90X900
bool "Nuvoton W90X900 CPU"
select CPU_ARM926T
select ARCH_REQUIRE_GPIOLIB
select GENERIC_GPIO
select HAVE_CLK
select COMMON_CLKDEV
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
help
Support for Nuvoton (Winbond logic dept.) ARM9 processor,
......@@ -569,7 +556,6 @@ config ARCH_W90X900
config ARCH_NUC93X
bool "Nuvoton NUC93X CPU"
select CPU_ARM926T
select HAVE_CLK
select COMMON_CLKDEV
help
Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a
......@@ -578,8 +564,8 @@ config ARCH_NUC93X
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
select CPU_ARM926T
select HAVE_CLK
select COMMON_CLKDEV
select ARCH_USES_GETTIMEOFFSET
help
This enables support for Philips PNX4008 mobile platform.
......@@ -588,11 +574,8 @@ config ARCH_PXA
depends on MMU
select ARCH_MTD_XIP
select ARCH_HAS_CPUFREQ
select GENERIC_GPIO
select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
select PLAT_PXA
......@@ -601,14 +584,14 @@ config ARCH_PXA
config ARCH_MSM
bool "Qualcomm MSM"
select CPU_V6
select GENERIC_TIME
select HAVE_CLK
select GENERIC_CLOCKEVENTS
help
Support for Qualcomm MSM7K based systems. This runs on the ARM11
apps processor of the MSM7K and depends on a shared memory
interface to the ARM9 modem processor which runs the baseband stack
and controls some vital subsystems (clock and power control, etc).
Support for Qualcomm MSM/QSD based systems. This runs on the
apps processor of the MSM/QSD and depends on a shared memory
interface to the modem processor which runs the baseband
stack and controls some vital subsystems
(clock and power control, etc).
config ARCH_SHMOBILE
bool "Renesas SH-Mobile"
......@@ -625,6 +608,7 @@ config ARCH_RPC
select ISA_DMA_API
select NO_IOPORT
select ARCH_SPARSEMEM_ENABLE
select ARCH_USES_GETTIMEOFFSET
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
......@@ -637,8 +621,6 @@ config ARCH_SA1100
select ARCH_MTD_XIP
select ARCH_HAS_CPUFREQ
select CPU_FREQ
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_CLK
select TICK_ONESHOT
......@@ -647,23 +629,28 @@ config ARCH_SA1100
Support for StrongARM 11x0 based boards.
config ARCH_S3C2410
bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450"
select GENERIC_GPIO
select ARCH_HAS_CPUFREQ
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
the Samsung SMDK2410 development board (and derivatives).
Note, the S3C2416 and the S3C2450 are so close that they even share
the same SoC ID code. This means that there is no seperate machine
directory (no arch/arm/mach-s3c2450) as the S3C2416 was first.
config ARCH_S3C64XX
bool "Samsung S3C64XX"
select PLAT_SAMSUNG
select CPU_V6
select GENERIC_GPIO
select ARM_VIC
select HAVE_CLK
select NO_IOPORT
select ARCH_USES_GETTIMEOFFSET
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select SAMSUNG_CLKSRC
......@@ -720,6 +707,7 @@ config ARCH_SHARK
select ISA_DMA
select ZONE_DMA
select PCI
select ARCH_USES_GETTIMEOFFSET
help
Support for the StrongARM based Digital DNARD machine, also known
as "Shark" (<http://www.shark-linux.de/shark.html>).
......@@ -729,6 +717,7 @@ config ARCH_LH7A40X
select CPU_ARM922T
select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
select ARCH_USES_GETTIMEOFFSET
help
Say Y here for systems based on one of the Sharp LH7A40X
System on a Chip processors. These CPUs include an ARM922T
......@@ -742,9 +731,7 @@ config ARCH_U300
select HAVE_TCM
select ARM_AMBA
select ARM_VIC
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_CLK
select COMMON_CLKDEV
select GENERIC_GPIO
help
......@@ -754,9 +741,9 @@ config ARCH_U8500
bool "ST-Ericsson U8500 Series"
select CPU_V7
select ARM_AMBA
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
help
Support for ST-Ericsson's Ux500 architecture
......@@ -765,11 +752,8 @@ config ARCH_NOMADIK
select ARM_AMBA
select ARM_VIC
select CPU_ARM926T
select HAVE_CLK
select COMMON_CLKDEV
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
Support for the Nomadik platform by ST-Ericsson
......@@ -777,11 +761,8 @@ config ARCH_NOMADIK
config ARCH_DAVINCI
bool "TI DaVinci"
select CPU_ARM926T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select ZONE_DMA
select HAVE_IDE
select COMMON_CLKDEV
......@@ -792,16 +773,24 @@ config ARCH_DAVINCI
config ARCH_OMAP
bool "TI OMAP"
select GENERIC_GPIO
select HAVE_CLK
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_CPUFREQ
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select ARCH_HAS_HOLES_MEMORYMODEL
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
config PLAT_SPEAR
bool "ST SPEAr"
select ARM_AMBA
select ARCH_REQUIRE_GPIOLIB
select COMMON_CLKDEV
select GENERIC_CLOCKEVENTS
select HAVE_CLK
help
Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).
endchoice
#
......@@ -817,6 +806,8 @@ source "arch/arm/mach-bcmring/Kconfig"
source "arch/arm/mach-clps711x/Kconfig"
source "arch/arm/mach-cns3xxx/Kconfig"
source "arch/arm/mach-davinci/Kconfig"
source "arch/arm/mach-dove/Kconfig"
......@@ -887,11 +878,13 @@ source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/plat-s5p/Kconfig"
source "arch/arm/plat-s5pc1xx/Kconfig"
source "arch/arm/plat-spear/Kconfig"
if ARCH_S3C2410
source "arch/arm/mach-s3c2400/Kconfig"
source "arch/arm/mach-s3c2410/Kconfig"
source "arch/arm/mach-s3c2412/Kconfig"
source "arch/arm/mach-s3c2416/Kconfig"
source "arch/arm/mach-s3c2440/Kconfig"
source "arch/arm/mach-s3c2443/Kconfig"
endif
......@@ -920,6 +913,8 @@ source "arch/arm/mach-ux500/Kconfig"
source "arch/arm/mach-versatile/Kconfig"
source "arch/arm/mach-vexpress/Kconfig"
source "arch/arm/mach-w90x900/Kconfig"
# Definitions to make life easier
......@@ -929,7 +924,6 @@ config ARCH_ACORN
config PLAT_IOP
bool
select GENERIC_CLOCKEVENTS
select GENERIC_TIME
config PLAT_ORION
bool
......@@ -937,6 +931,12 @@ config PLAT_ORION
config PLAT_PXA
bool
config PLAT_VERSATILE
bool
config ARM_TIMER_SP804
bool
source arch/arm/mm/Kconfig
config IWMMXT
......@@ -1065,6 +1065,10 @@ config PCI
your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
VESA. If you have PCI, say Y, otherwise N.
config PCI_DOMAINS
bool
depends on PCI
config PCI_SYSCALL
def_bool PCI
......@@ -1093,10 +1097,11 @@ source "kernel/time/Kconfig"
config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
depends on GENERIC_CLOCKEVENTS
select USE_GENERIC_SMP_HELPERS
select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
......@@ -1277,7 +1282,7 @@ config HIGHPTE
config HW_PERF_EVENTS
bool "Enable hardware performance counter support for perf events"
depends on PERF_EVENTS && CPU_HAS_PMU && (CPU_V6 || CPU_V7)
depends on PERF_EVENTS && CPU_HAS_PMU
default y
help
Enable hardware performance counter support for perf events. If
......
arch/arm/Makefile
浏览文件 @ 1d3c6ff4
......@@ -121,6 +121,7 @@ machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
machine-$(CONFIG_ARCH_AT91) := at91
machine-$(CONFIG_ARCH_BCMRING) := bcmring
machine-$(CONFIG_ARCH_CLPS711X) := clps711x
machine-$(CONFIG_ARCH_CNS3XXX) := cns3xxx
machine-$(CONFIG_ARCH_DAVINCI) := davinci
machine-$(CONFIG_ARCH_DOVE) := dove
machine-$(CONFIG_ARCH_EBSA110) := ebsa110
......@@ -160,7 +161,7 @@ machine-$(CONFIG_ARCH_PNX4008) := pnx4008
machine-$(CONFIG_ARCH_PXA) := pxa
machine-$(CONFIG_ARCH_REALVIEW) := realview
machine-$(CONFIG_ARCH_RPC) := rpc
machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2443
machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443
machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx
machine-$(CONFIG_ARCH_S5P6440) := s5p6440
......@@ -175,9 +176,14 @@ machine-$(CONFIG_ARCH_STMP37XX) := stmp37xx
machine-$(CONFIG_ARCH_U300) := u300
machine-$(CONFIG_ARCH_U8500) := ux500
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_VEXPRESS) := vexpress
machine-$(CONFIG_ARCH_W90X900) := w90x900
machine-$(CONFIG_ARCH_NUC93X) := nuc93x
machine-$(CONFIG_FOOTBRIDGE) := footbridge
machine-$(CONFIG_MACH_SPEAR300) := spear3xx
machine-$(CONFIG_MACH_SPEAR310) := spear3xx
machine-$(CONFIG_MACH_SPEAR320) := spear3xx
machine-$(CONFIG_MACH_SPEAR600) := spear6xx
# Platform directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
......@@ -192,6 +198,8 @@ plat-$(CONFIG_PLAT_PXA) := pxa
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx samsung
plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx samsung
plat-$(CONFIG_PLAT_S5P) := s5p samsung
plat-$(CONFIG_PLAT_SPEAR) := spear
plat-$(CONFIG_PLAT_VERSATILE) := versatile
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
......
arch/arm/boot/compressed/Makefile
浏览文件 @ 1d3c6ff4
......@@ -65,6 +65,7 @@ SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
suffix_$(CONFIG_KERNEL_GZIP) = gzip
suffix_$(CONFIG_KERNEL_LZO) = lzo
suffix_$(CONFIG_KERNEL_LZMA) = lzma
targets := vmlinux vmlinux.lds \
piggy.$(suffix_y) piggy.$(suffix_y).o \
......
arch/arm/boot/compressed/decompress.c
浏览文件 @ 1d3c6ff4
......@@ -40,6 +40,10 @@ extern void error(char *);
#include "../../../../lib/decompress_unlzo.c"
#endif
#ifdef CONFIG_KERNEL_LZMA
#include "../../../../lib/decompress_unlzma.c"
#endif
void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x))
{
decompress(input, len, NULL, NULL, output, NULL, error);
......
arch/arm/boot/compressed/piggy.lzma.S 0 → 100644
浏览文件 @ 1d3c6ff4
.section .piggydata,#alloc
.globl input_data
input_data:
.incbin "arch/arm/boot/compressed/piggy.lzma"
.globl input_data_end
input_data_end:
arch/arm/common/Kconfig
浏览文件 @ 1d3c6ff4
......@@ -12,10 +12,10 @@ config ARM_VIC_NR
The maximum number of VICs available in the system, for
power management.
config ICST525
config ICST
bool
config ICST307
config PL330
bool
config SA1111
......@@ -40,3 +40,4 @@ config SHARP_SCOOP
config COMMON_CLKDEV
bool
select HAVE_CLK
arch/arm/common/Makefile
浏览文件 @ 1d3c6ff4
......@@ -4,8 +4,8 @@
obj-$(CONFIG_ARM_GIC) += gic.o
obj-$(CONFIG_ARM_VIC) += vic.o
obj-$(CONFIG_ICST525) += icst525.o
obj-$(CONFIG_ICST307) += icst307.o
obj-$(CONFIG_ICST) += icst.o
obj-$(CONFIG_PL330) += pl330.o
obj-$(CONFIG_SA1111) += sa1111.o
obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
obj-$(CONFIG_DMABOUNCE) += dmabounce.o
......
arch/arm/common/clkdev.c
浏览文件 @ 1d3c6ff4
......@@ -53,12 +53,13 @@ static struct clk *clk_find(const char *dev_id, const char *con_id)
continue;
match += 1;
}
if (match == 0)
continue;
if (match > best) {
clk = p->clk;
best = match;
if (match != 3)
best = match;
else
break;
}
}
return clk;
......
arch/arm/common/icst307.c → arch/arm/common/icst.c
浏览文件 @ 1d3c6ff4
......@@ -17,29 +17,35 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <asm/hardware/icst307.h>
#include <asm/hardware/icst.h>
/*
* Divisors for each OD setting.
*/
static unsigned char s2div[8] = { 10, 2, 8, 4, 5, 7, 3, 6 };
const unsigned char icst307_s2div[8] = { 10, 2, 8, 4, 5, 7, 3, 6 };
const unsigned char icst525_s2div[8] = { 10, 2, 8, 4, 5, 7, 9, 6 };
EXPORT_SYMBOL(icst307_s2div);
EXPORT_SYMBOL(icst525_s2div);
unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco)
unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco)
{
return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * s2div[vco.s]);
return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * p->s2div[vco.s]);
}
EXPORT_SYMBOL(icst307_khz);
EXPORT_SYMBOL(icst_hz);
/*
* Ascending divisor S values.
*/
static unsigned char idx2s[8] = { 1, 6, 3, 4, 7, 5, 2, 0 };
const unsigned char icst307_idx2s[8] = { 1, 6, 3, 4, 7, 5, 2, 0 };
const unsigned char icst525_idx2s[8] = { 1, 3, 4, 7, 5, 2, 6, 0 };
EXPORT_SYMBOL(icst307_idx2s);
EXPORT_SYMBOL(icst525_idx2s);
struct icst307_vco
icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq)
struct icst_vco
icst_hz_to_vco(const struct icst_params *p, unsigned long freq)
{
struct icst307_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
struct icst_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
unsigned long f;
unsigned int i = 0, rd, best = (unsigned int)-1;
......@@ -48,19 +54,16 @@ icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq)
* that the PLL output is within spec.
*/
do {
f = freq * s2div[idx2s[i]];
f = freq * p->s2div[p->idx2s[i]];
/*
* f must be between 6MHz and 200MHz (3.3 or 5V)
*/
if (f > 6000 && f <= p->vco_max)
if (f > p->vco_min && f <= p->vco_max)
break;
} while (i < ARRAY_SIZE(idx2s));
} while (i < 8);
if (i >= ARRAY_SIZE(idx2s))
if (i >= 8)
return vco;
vco.s = idx2s[i];
vco.s = p->idx2s[i];
/*
* Now find the closest divisor combination
......@@ -94,68 +97,4 @@ icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq)
return vco;
}
EXPORT_SYMBOL(icst307_khz_to_vco);
struct icst307_vco
icst307_ps_to_vco(const struct icst307_params *p, unsigned long period)
{
struct icst307_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
unsigned long f, ps;
unsigned int i = 0, rd, best = (unsigned int)-1;
ps = 1000000000UL / p->vco_max;
/*
* First, find the PLL output divisor such
* that the PLL output is within spec.
*/
do {
f = period / s2div[idx2s[i]];
/*
* f must be between 6MHz and 200MHz (3.3 or 5V)
*/
if (f >= ps && f < 1000000000UL / 6000 + 1)
break;
} while (i < ARRAY_SIZE(idx2s));
if (i >= ARRAY_SIZE(idx2s))
return vco;
vco.s = idx2s[i];
ps = 500000000UL / p->ref;
/*
* Now find the closest divisor combination
* which gives a PLL output of 'f'.
*/
for (rd = p->rd_min; rd <= p->rd_max; rd++) {
unsigned long f_in_div, f_pll;
unsigned int vd;
int f_diff;
f_in_div = ps * rd;
vd = (f_in_div + f / 2) / f;
if (vd < p->vd_min || vd > p->vd_max)
continue;
f_pll = (f_in_div + vd / 2) / vd;
f_diff = f_pll - f;
if (f_diff < 0)
f_diff = -f_diff;
if ((unsigned)f_diff < best) {
vco.v = vd - 8;
vco.r = rd - 2;
if (f_diff == 0)
break;
best = f_diff;
}
}
return vco;
}
EXPORT_SYMBOL(icst307_ps_to_vco);
EXPORT_SYMBOL(icst_hz_to_vco);
arch/arm/common/icst525.c 已删除 100644 → 0
浏览文件 @ 7c7cbaf5
/*
* linux/arch/arm/common/icst525.c
*
* Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Support functions for calculating clocks/divisors for the ICST525
* clock generators. See http://www.icst.com/ for more information
* on these devices.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <asm/hardware/icst525.h>
/*
* Divisors for each OD setting.
*/
static unsigned char s2div[8] = { 10, 2, 8, 4, 5, 7, 9, 6 };
unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco)
{
return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * s2div[vco.s]);
}
EXPORT_SYMBOL(icst525_khz);
/*
* Ascending divisor S values.
*/
static unsigned char idx2s[] = { 1, 3, 4, 7, 5, 2, 6, 0 };
struct icst525_vco
icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq)
{
struct icst525_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
unsigned long f;
unsigned int i = 0, rd, best = (unsigned int)-1;
/*
* First, find the PLL output divisor such
* that the PLL output is within spec.
*/
do {
f = freq * s2div[idx2s[i]];
/*
* f must be between 10MHz and
* 320MHz (5V) or 200MHz (3V)
*/
if (f > 10000 && f <= p->vco_max)
break;
} while (i < ARRAY_SIZE(idx2s));
if (i >= ARRAY_SIZE(idx2s))
return vco;
vco.s = idx2s[i];
/*
* Now find the closest divisor combination
* which gives a PLL output of 'f'.
*/
for (rd = p->rd_min; rd <= p->rd_max; rd++) {
unsigned long fref_div, f_pll;
unsigned int vd;
int f_diff;
fref_div = (2 * p->ref) / rd;
vd = (f + fref_div / 2) / fref_div;
if (vd < p->vd_min || vd > p->vd_max)
continue;
f_pll = fref_div * vd;
f_diff = f_pll - f;
if (f_diff < 0)
f_diff = -f_diff;
if ((unsigned)f_diff < best) {
vco.v = vd - 8;
vco.r = rd - 2;
if (f_diff == 0)
break;
best = f_diff;
}
}
return vco;
}
EXPORT_SYMBOL(icst525_khz_to_vco);
struct icst525_vco
icst525_ps_to_vco(const struct icst525_params *p, unsigned long period)
{
struct icst525_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
unsigned long f, ps;
unsigned int i = 0, rd, best = (unsigned int)-1;
ps = 1000000000UL / p->vco_max;
/*
* First, find the PLL output divisor such
* that the PLL output is within spec.
*/
do {
f = period / s2div[idx2s[i]];
/*
* f must be between 10MHz and
* 320MHz (5V) or 200MHz (3V)
*/
if (f >= ps && f < 100000)
break;
} while (i < ARRAY_SIZE(idx2s));
if (i >= ARRAY_SIZE(idx2s))
return vco;
vco.s = idx2s[i];
ps = 500000000UL / p->ref;
/*
* Now find the closest divisor combination
* which gives a PLL output of 'f'.
*/
for (rd = p->rd_min; rd <= p->rd_max; rd++) {
unsigned long f_in_div, f_pll;
unsigned int vd;
int f_diff;
f_in_div = ps * rd;
vd = (f_in_div + f / 2) / f;
if (vd < p->vd_min || vd > p->vd_max)
continue;
f_pll = (f_in_div + vd / 2) / vd;
f_diff = f_pll - f;
if (f_diff < 0)
f_diff = -f_diff;
if ((unsigned)f_diff < best) {
vco.v = vd - 8;
vco.r = rd - 2;
if (f_diff == 0)
break;
best = f_diff;
}
}
return vco;
}
EXPORT_SYMBOL(icst525_ps_to_vco);
arch/arm/common/pl330.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/common/vic.c
浏览文件 @ 1d3c6ff4
......@@ -266,13 +266,53 @@ static int vic_set_wake(unsigned int irq, unsigned int on)
#endif /* CONFIG_PM */
static struct irq_chip vic_chip = {
.name = "VIC",
.ack = vic_ack_irq,
.mask = vic_mask_irq,
.unmask = vic_unmask_irq,
.set_wake = vic_set_wake,
.name = "VIC",
.ack = vic_ack_irq,
.mask = vic_mask_irq,
.unmask = vic_unmask_irq,
.set_wake = vic_set_wake,
};
static void __init vic_disable(void __iomem *base)
{
writel(0, base + VIC_INT_SELECT);
writel(0, base + VIC_INT_ENABLE);
writel(~0, base + VIC_INT_ENABLE_CLEAR);
writel(0, base + VIC_IRQ_STATUS);
writel(0, base + VIC_ITCR);
writel(~0, base + VIC_INT_SOFT_CLEAR);
}
static void __init vic_clear_interrupts(void __iomem *base)
{
unsigned int i;
writel(0, base + VIC_PL190_VECT_ADDR);
for (i = 0; i < 19; i++) {
unsigned int value;
value = readl(base + VIC_PL190_VECT_ADDR);
writel(value, base + VIC_PL190_VECT_ADDR);
}
}
static void __init vic_set_irq_sources(void __iomem *base,
unsigned int irq_start, u32 vic_sources)
{
unsigned int i;
for (i = 0; i < 32; i++) {
if (vic_sources & (1 << i)) {
unsigned int irq = irq_start + i;
set_irq_chip(irq, &vic_chip);
set_irq_chip_data(irq, base);
set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
}
}
/*
* The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
* The original cell has 32 interrupts, while the modified one has 64,
......@@ -287,13 +327,7 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
/* Disable all interrupts initially. */
writel(0, base + VIC_INT_SELECT);
writel(0, base + VIC_INT_ENABLE);
writel(~0, base + VIC_INT_ENABLE_CLEAR);
writel(0, base + VIC_IRQ_STATUS);
writel(0, base + VIC_ITCR);
writel(~0, base + VIC_INT_SOFT_CLEAR);
vic_disable(base);
/*
* Make sure we clear all existing interrupts. The vector registers
......@@ -302,13 +336,8 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
* the second base address, which is 0x20 in the page
*/
if (vic_2nd_block) {
writel(0, base + VIC_PL190_VECT_ADDR);
for (i = 0; i < 19; i++) {
unsigned int value;
vic_clear_interrupts(base);
value = readl(base + VIC_PL190_VECT_ADDR);
writel(value, base + VIC_PL190_VECT_ADDR);
}
/* ST has 16 vectors as well, but we don't enable them by now */
for (i = 0; i < 16; i++) {
void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
......@@ -318,16 +347,7 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
writel(32, base + VIC_PL190_DEF_VECT_ADDR);
}
for (i = 0; i < 32; i++) {
if (vic_sources & (1 << i)) {
unsigned int irq = irq_start + i;
set_irq_chip(irq, &vic_chip);
set_irq_chip_data(irq, base);
set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
}
vic_set_irq_sources(base, irq_start, vic_sources);
}
/**
......@@ -365,37 +385,14 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
}
/* Disable all interrupts initially. */
vic_disable(base);
writel(0, base + VIC_INT_SELECT);
writel(0, base + VIC_INT_ENABLE);
writel(~0, base + VIC_INT_ENABLE_CLEAR);
writel(0, base + VIC_IRQ_STATUS);
writel(0, base + VIC_ITCR);
writel(~0, base + VIC_INT_SOFT_CLEAR);
/*
* Make sure we clear all existing interrupts
*/
writel(0, base + VIC_PL190_VECT_ADDR);
for (i = 0; i < 19; i++) {
unsigned int value;
value = readl(base + VIC_PL190_VECT_ADDR);
writel(value, base + VIC_PL190_VECT_ADDR);
}
/* Make sure we clear all existing interrupts */
vic_clear_interrupts(base);
vic_init2(base);
for (i = 0; i < 32; i++) {
if (vic_sources & (1 << i)) {
unsigned int irq = irq_start + i;
set_irq_chip(irq, &vic_chip);
set_irq_chip_data(irq, base);
set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
}
vic_set_irq_sources(base, irq_start, vic_sources);
vic_pm_register(base, irq_start, resume_sources);
}
arch/arm/configs/cns3420vb_defconfig 0 → 100644
浏览文件 @ 1d3c6ff4
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.34-rc6
# Sun May 2 21:58:08 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_OPROFILE_ARMV6=y
CONFIG_OPROFILE_ARM11_CORE=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
# CONFIG_SLOW_WORK_DEBUG is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=m
# CONFIG_CFQ_GROUP_IOSCHED is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# System Type
#
CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
CONFIG_ARCH_CNS3XXX=y
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P6440 is not set
# CONFIG_ARCH_S5P6442 is not set
# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
#
# CNS3XXX platform type
#
CONFIG_MACH_CNS3420VB=y
#
# Processor Type
#
CONFIG_CPU_V6=y
# CONFIG_CPU_32v6K is not set
CONFIG_CPU_32v6=y
CONFIG_CPU_ABRT_EV6=y
CONFIG_CPU_PABRT_V6=y
CONFIG_CPU_CACHE_V6=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V6=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_411920 is not set
CONFIG_ARM_GIC=y
#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,38400 mem=128M root=/dev/mmcblk0p1 ro rootwait"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
#
# CPU Power Management
#
# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
# CONFIG_FPE_NWFPE is not set
# CONFIG_FPE_FASTFPE is not set
# CONFIG_VFP is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_NET is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=20000
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_SATA_PMP is not set
# CONFIG_ATA_SFF is not set
# CONFIG_MD is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
# Caches
#
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
# CONFIG_CACHEFILES is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LKDTM is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_RING_BUFFER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_ARM_UNWIND is not set
# CONFIG_DEBUG_USER is not set
# CONFIG_OC_ETM is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_GENERIC_ATOMIC64=y
arch/arm/configs/mmp2_defconfig
浏览文件 @ 1d3c6ff4
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.33-rc2
# Tue Jan 5 13:55:22 2010
# Linux kernel version: 2.6.34-rc5
# Wed Apr 28 11:23:19 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
......@@ -18,6 +19,7 @@ CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
......@@ -32,6 +34,12 @@ CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
......@@ -52,7 +60,6 @@ CONFIG_RCU_FANOUT=32
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
......@@ -85,10 +92,14 @@ CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
......@@ -104,6 +115,7 @@ CONFIG_HAVE_CLK=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
......@@ -170,6 +182,7 @@ CONFIG_MMU=y
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
......@@ -179,7 +192,6 @@ CONFIG_MMU=y
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
......@@ -196,21 +208,26 @@ CONFIG_ARCH_MMP=y
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P6440 is not set
# CONFIG_ARCH_S5P6442 is not set
# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_MACH_TAVOREVB is not set
#
......@@ -218,8 +235,10 @@ CONFIG_ARCH_MMP=y
#
# CONFIG_MACH_ASPENITE is not set
# CONFIG_MACH_ZYLONITE2 is not set
# CONFIG_MACH_AVENGERS_LITE is not set
# CONFIG_MACH_TTC_DKB is not set
CONFIG_MACH_FLINT=y
CONFIG_MACH_MARVELL_JASPER=y
CONFIG_CPU_MMP2=y
CONFIG_PLAT_PXA=y
......@@ -246,7 +265,10 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_OUTER_CACHE=y
CONFIG_CACHE_TAUROS2=y
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_411920 is not set
CONFIG_COMMON_CLKDEV=y
......@@ -298,7 +320,7 @@ CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M user_debug=255"
CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
......@@ -338,7 +360,6 @@ CONFIG_NET=y
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
......@@ -532,6 +553,7 @@ CONFIG_HAVE_IDE=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
......@@ -640,6 +662,7 @@ CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
......@@ -667,6 +690,7 @@ CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_PXA=y
# CONFIG_I2C_PXA_SLAVE is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
......@@ -679,15 +703,9 @@ CONFIG_I2C_PXA=y
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
......@@ -702,13 +720,16 @@ CONFIG_GPIOLIB=y
#
# Memory mapped GPIO expanders:
#
# CONFIG_GPIO_IT8761E is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
......@@ -737,10 +758,12 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
......@@ -749,24 +772,27 @@ CONFIG_MFD_CORE=y
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
CONFIG_MFD_MAX8925=y
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
CONFIG_MFD_88PM8607=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_DUMMY is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8649=y
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_MAX8925=y
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_REGULATOR_88PM8607=y
# CONFIG_MEDIA_SUPPORT is not set
#
......@@ -781,6 +807,7 @@ CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_MAX8925=y
#
# Display device support
......@@ -821,6 +848,7 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_MAX8925=y
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
......@@ -872,7 +900,6 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
......@@ -883,7 +910,7 @@ CONFIG_FS_POSIX_ACL=y
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
......@@ -940,6 +967,7 @@ CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
......@@ -967,6 +995,7 @@ CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
......@@ -990,7 +1019,7 @@ CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
......@@ -1032,6 +1061,7 @@ CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
......@@ -1052,6 +1082,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_DYNAMIC_DEBUG=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
......@@ -1059,9 +1090,7 @@ CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_ICEDCC is not set
# CONFIG_DEBUG_LL is not set
# CONFIG_OC_ETM is not set
#
......
arch/arm/configs/spear300_defconfig 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/configs/spear310_defconfig 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/configs/spear320_defconfig 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/configs/spear600_defconfig 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/configs/stamp9g20_defconfig 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/include/asm/hardware/arm_timer.h
浏览文件 @ 1d3c6ff4
#ifndef __ASM_ARM_HARDWARE_ARM_TIMER_H
#define __ASM_ARM_HARDWARE_ARM_TIMER_H
#define TIMER_LOAD 0x00
#define TIMER_VALUE 0x04
#define TIMER_CTRL 0x08
#define TIMER_CTRL_ONESHOT (1 << 0)
#define TIMER_CTRL_32BIT (1 << 1)
#define TIMER_CTRL_DIV1 (0 << 2)
#define TIMER_CTRL_DIV16 (1 << 2)
#define TIMER_CTRL_DIV256 (2 << 2)
#define TIMER_CTRL_IE (1 << 5) /* Interrupt Enable (versatile only) */
#define TIMER_CTRL_PERIODIC (1 << 6)
#define TIMER_CTRL_ENABLE (1 << 7)
/*
* ARM timer implementation, found in Integrator, Versatile and Realview
* platforms. Not all platforms support all registers and bits in these
* registers, so we mark them with A for Integrator AP, C for Integrator
* CP, V for Versatile and R for Realview.
*
* Integrator AP has 16-bit timers, Integrator CP, Versatile and Realview
* can have 16-bit or 32-bit selectable via a bit in the control register.
*/
#define TIMER_LOAD 0x00 /* ACVR rw */
#define TIMER_VALUE 0x04 /* ACVR ro */
#define TIMER_CTRL 0x08 /* ACVR rw */
#define TIMER_CTRL_ONESHOT (1 << 0) /* CVR */
#define TIMER_CTRL_32BIT (1 << 1) /* CVR */
#define TIMER_CTRL_DIV1 (0 << 2) /* ACVR */
#define TIMER_CTRL_DIV16 (1 << 2) /* ACVR */
#define TIMER_CTRL_DIV256 (2 << 2) /* ACVR */
#define TIMER_CTRL_IE (1 << 5) /* VR */
#define TIMER_CTRL_PERIODIC (1 << 6) /* ACVR */
#define TIMER_CTRL_ENABLE (1 << 7) /* ACVR */
#define TIMER_INTCLR 0x0c
#define TIMER_RIS 0x10
#define TIMER_MIS 0x14
#define TIMER_BGLOAD 0x18
#define TIMER_INTCLR 0x0c /* ACVR wo */
#define TIMER_RIS 0x10 /* CVR ro */
#define TIMER_MIS 0x14 /* CVR ro */
#define TIMER_BGLOAD 0x18 /* CVR rw */
#endif
arch/arm/include/asm/hardware/cache-l2x0.h
浏览文件 @ 1d3c6ff4
......@@ -21,6 +21,9 @@
#define __ASM_ARM_HARDWARE_L2X0_H
#define L2X0_CACHE_ID 0x000
#define L2X0_CACHE_ID_PART_MASK (0xf << 6)
#define L2X0_CACHE_ID_PART_L210 (1 << 6)
#define L2X0_CACHE_ID_PART_L310 (3 << 6)
#define L2X0_CACHE_TYPE 0x004
#define L2X0_CTRL 0x100
#define L2X0_AUX_CTRL 0x104
......
arch/arm/include/asm/hardware/icst307.h → arch/arm/include/asm/hardware/icst.h
浏览文件 @ 1d3c6ff4
/*
* arch/arm/include/asm/hardware/icst307.h
* arch/arm/include/asm/hardware/icst.h
*
* Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
*
......@@ -7,32 +7,53 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Support functions for calculating clocks/divisors for the ICS307
* Support functions for calculating clocks/divisors for the ICST
* clock generators. See http://www.icst.com/ for more information
* on these devices.
*
* This file is similar to the icst525.h file
*/
#ifndef ASMARM_HARDWARE_ICST307_H
#define ASMARM_HARDWARE_ICST307_H
#ifndef ASMARM_HARDWARE_ICST_H
#define ASMARM_HARDWARE_ICST_H
struct icst307_params {
struct icst_params {
unsigned long ref;
unsigned long vco_max; /* inclusive */
unsigned long vco_min; /* exclusive */
unsigned short vd_min; /* inclusive */
unsigned short vd_max; /* inclusive */
unsigned char rd_min; /* inclusive */
unsigned char rd_max; /* inclusive */
const unsigned char *s2div; /* chip specific s2div array */
const unsigned char *idx2s; /* chip specific idx2s array */
};
struct icst307_vco {
struct icst_vco {
unsigned short v;
unsigned char r;
unsigned char s;
};
unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco);
struct icst307_vco icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq);
struct icst307_vco icst307_ps_to_vco(const struct icst307_params *p, unsigned long period);
unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco);
struct icst_vco icst_hz_to_vco(const struct icst_params *p, unsigned long freq);
/*
* ICST307 VCO frequency must be between 6MHz and 200MHz (3.3 or 5V).
* This frequency is pre-output divider.
*/
#define ICST307_VCO_MIN 6000000
#define ICST307_VCO_MAX 200000000
extern const unsigned char icst307_s2div[];
extern const unsigned char icst307_idx2s[];
/*
* ICST525 VCO frequency must be between 10MHz and 200MHz (3V) or 320MHz (5V).
* This frequency is pre-output divider.
*/
#define ICST525_VCO_MIN 10000000
#define ICST525_VCO_MAX_3V 200000000
#define ICST525_VCO_MAX_5V 320000000
extern const unsigned char icst525_s2div[];
extern const unsigned char icst525_idx2s[];
#endif
arch/arm/include/asm/hardware/icst525.h 已删除 100644 → 0
浏览文件 @ 7c7cbaf5
/*
* arch/arm/include/asm/hardware/icst525.h
*
* Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Support functions for calculating clocks/divisors for the ICST525
* clock generators. See http://www.icst.com/ for more information
* on these devices.
*/
#ifndef ASMARM_HARDWARE_ICST525_H
#define ASMARM_HARDWARE_ICST525_H
struct icst525_params {
unsigned long ref;
unsigned long vco_max; /* inclusive */
unsigned short vd_min; /* inclusive */
unsigned short vd_max; /* inclusive */
unsigned char rd_min; /* inclusive */
unsigned char rd_max; /* inclusive */
};
struct icst525_vco {
unsigned short v;
unsigned char r;
unsigned char s;
};
unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco);
struct icst525_vco icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq);
struct icst525_vco icst525_ps_to_vco(const struct icst525_params *p, unsigned long period);
#endif
arch/arm/include/asm/hardware/pl330.h 0 → 100644
浏览文件 @ 1d3c6ff4
/* linux/include/asm/hardware/pl330.h
*
* Copyright (C) 2010 Samsung Electronics Co. Ltd.
* Jaswinder Singh <jassi.brar@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __PL330_CORE_H
#define __PL330_CORE_H
#define PL330_MAX_CHAN 8
#define PL330_MAX_IRQS 32
#define PL330_MAX_PERI 32
enum pl330_srccachectrl {
SCCTRL0 = 0, /* Noncacheable and nonbufferable */
SCCTRL1, /* Bufferable only */
SCCTRL2, /* Cacheable, but do not allocate */
SCCTRL3, /* Cacheable and bufferable, but do not allocate */
SINVALID1,
SINVALID2,
SCCTRL6, /* Cacheable write-through, allocate on reads only */
SCCTRL7, /* Cacheable write-back, allocate on reads only */
};
enum pl330_dstcachectrl {
DCCTRL0 = 0, /* Noncacheable and nonbufferable */
DCCTRL1, /* Bufferable only */
DCCTRL2, /* Cacheable, but do not allocate */
DCCTRL3, /* Cacheable and bufferable, but do not allocate */
DINVALID1 = 8,
DINVALID2,
DCCTRL6, /* Cacheable write-through, allocate on writes only */
DCCTRL7, /* Cacheable write-back, allocate on writes only */
};
/* Populated by the PL330 core driver for DMA API driver's info */
struct pl330_config {
u32 periph_id;
u32 pcell_id;
#define DMAC_MODE_NS (1 << 0)
unsigned int mode;
unsigned int data_bus_width:10; /* In number of bits */
unsigned int data_buf_dep:10;
unsigned int num_chan:4;
unsigned int num_peri:6;
u32 peri_ns;
unsigned int num_events:6;
u32 irq_ns;
};
/* Handle to the DMAC provided to the PL330 core */
struct pl330_info {
/* Owning device */
struct device *dev;
/* Size of MicroCode buffers for each channel. */
unsigned mcbufsz;
/* ioremap'ed address of PL330 registers. */
void __iomem *base;
/* Client can freely use it. */
void *client_data;
/* PL330 core data, Client must not touch it. */
void *pl330_data;
/* Populated by the PL330 core driver during pl330_add */
struct pl330_config pcfg;
/*
* If the DMAC has some reset mechanism, then the
* client may want to provide pointer to the method.
*/
void (*dmac_reset)(struct pl330_info *pi);
};
enum pl330_byteswap {
SWAP_NO = 0,
SWAP_2,
SWAP_4,
SWAP_8,
SWAP_16,
};
/**
* Request Configuration.
* The PL330 core does not modify this and uses the last
* working configuration if the request doesn't provide any.
*
* The Client may want to provide this info only for the
* first request and a request with new settings.
*/
struct pl330_reqcfg {
/* Address Incrementing */
unsigned dst_inc:1;
unsigned src_inc:1;
/*
* For now, the SRC & DST protection levels
* and burst size/length are assumed same.
*/
bool nonsecure;
bool privileged;
bool insnaccess;
unsigned brst_len:5;
unsigned brst_size:3; /* in power of 2 */
enum pl330_dstcachectrl dcctl;
enum pl330_srccachectrl scctl;
enum pl330_byteswap swap;
};
/*
* One cycle of DMAC operation.
* There may be more than one xfer in a request.
*/
struct pl330_xfer {
u32 src_addr;
u32 dst_addr;
/* Size to xfer */
u32 bytes;
/*
* Pointer to next xfer in the list.
* The last xfer in the req must point to NULL.
*/
struct pl330_xfer *next;
};
/* The xfer callbacks are made with one of these arguments. */
enum pl330_op_err {
/* The all xfers in the request were success. */
PL330_ERR_NONE,
/* If req aborted due to global error. */
PL330_ERR_ABORT,
/* If req failed due to problem with Channel. */
PL330_ERR_FAIL,
};
enum pl330_reqtype {
MEMTOMEM,
MEMTODEV,
DEVTOMEM,
DEVTODEV,
};
/* A request defining Scatter-Gather List ending with NULL xfer. */
struct pl330_req {
enum pl330_reqtype rqtype;
/* Index of peripheral for the xfer. */
unsigned peri:5;
/* Unique token for this xfer, set by the client. */
void *token;
/* Callback to be called after xfer. */
void (*xfer_cb)(void *token, enum pl330_op_err err);
/* If NULL, req will be done at last set parameters. */
struct pl330_reqcfg *cfg;
/* Pointer to first xfer in the request. */
struct pl330_xfer *x;
};
/*
* To know the status of the channel and DMAC, the client
* provides a pointer to this structure. The PL330 core
* fills it with current information.
*/
struct pl330_chanstatus {
/*
* If the DMAC engine halted due to some error,
* the client should remove-add DMAC.
*/
bool dmac_halted;
/*
* If channel is halted due to some error,
* the client should ABORT/FLUSH and START the channel.
*/
bool faulting;
/* Location of last load */
u32 src_addr;
/* Location of last store */
u32 dst_addr;
/*
* Pointer to the currently active req, NULL if channel is
* inactive, even though the requests may be present.
*/
struct pl330_req *top_req;
/* Pointer to req waiting second in the queue if any. */
struct pl330_req *wait_req;
};
enum pl330_chan_op {
/* Start the channel */
PL330_OP_START,
/* Abort the active xfer */
PL330_OP_ABORT,
/* Stop xfer and flush queue */
PL330_OP_FLUSH,
};
extern int pl330_add(struct pl330_info *);
extern void pl330_del(struct pl330_info *pi);
extern int pl330_update(const struct pl330_info *pi);
extern void pl330_release_channel(void *ch_id);
extern void *pl330_request_channel(const struct pl330_info *pi);
extern int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus);
extern int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op);
extern int pl330_submit_req(void *ch_id, struct pl330_req *r);
#endif /* __PL330_CORE_H */
arch/arm/include/asm/hardware/sp810.h 0 → 100644
浏览文件 @ 1d3c6ff4
/*
* arch/arm/include/asm/hardware/sp810.h
*
* ARM PrimeXsys System Controller SP810 header file
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar<viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARM_SP810_H
#define __ASM_ARM_SP810_H
#include <linux/io.h>
/* sysctl registers offset */
#define SCCTRL 0x000
#define SCSYSSTAT 0x004
#define SCIMCTRL 0x008
#define SCIMSTAT 0x00C
#define SCXTALCTRL 0x010
#define SCPLLCTRL 0x014
#define SCPLLFCTRL 0x018
#define SCPERCTRL0 0x01C
#define SCPERCTRL1 0x020
#define SCPEREN 0x024
#define SCPERDIS 0x028
#define SCPERCLKEN 0x02C
#define SCPERSTAT 0x030
#define SCSYSID0 0xEE0
#define SCSYSID1 0xEE4
#define SCSYSID2 0xEE8
#define SCSYSID3 0xEEC
#define SCITCR 0xF00
#define SCITIR0 0xF04
#define SCITIR1 0xF08
#define SCITOR 0xF0C
#define SCCNTCTRL 0xF10
#define SCCNTDATA 0xF14
#define SCCNTSTEP 0xF18
#define SCPERIPHID0 0xFE0
#define SCPERIPHID1 0xFE4
#define SCPERIPHID2 0xFE8
#define SCPERIPHID3 0xFEC
#define SCPCELLID0 0xFF0
#define SCPCELLID1 0xFF4
#define SCPCELLID2 0xFF8
#define SCPCELLID3 0xFFC
static inline void sysctl_soft_reset(void __iomem *base)
{
/* writing any value to SCSYSSTAT reg will reset system */
writel(0, base + SCSYSSTAT);
}
#endif /* __ASM_ARM_SP810_H */
arch/arm/include/asm/ioctls.h
浏览文件 @ 1d3c6ff4
......@@ -53,6 +53,9 @@
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCGRS485 0x542E
#define TIOCSRS485 0x542F
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
#define FIOASYNC 0x5452
......
arch/arm/include/asm/mach/pci.h
浏览文件 @ 1d3c6ff4
......@@ -8,10 +8,16 @@
* published by the Free Software Foundation.
*/
#ifndef __ASM_MACH_PCI_H
#define __ASM_MACH_PCI_H
struct pci_sys_data;
struct pci_bus;
struct hw_pci {
#ifdef CONFIG_PCI_DOMAINS
int domain;
#endif
struct list_head buses;
int nr_controllers;
int (*setup)(int nr, struct pci_sys_data *);
......@@ -26,6 +32,9 @@ struct hw_pci {
* Per-controller structure
*/
struct pci_sys_data {
#ifdef CONFIG_PCI_DOMAINS
int domain;
#endif
struct list_head node;
int busnr; /* primary bus number */
u64 mem_offset; /* bus->cpu memory mapping offset */
......@@ -70,3 +79,5 @@ extern int pci_v3_setup(int nr, struct pci_sys_data *);
extern struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *);
extern void pci_v3_preinit(void);
extern void pci_v3_postinit(void);
#endif /* __ASM_MACH_PCI_H */
arch/arm/include/asm/mach/time.h
浏览文件 @ 1d3c6ff4
......@@ -38,7 +38,7 @@ struct sys_timer {
void (*init)(void);
void (*suspend)(void);
void (*resume)(void);
#ifndef CONFIG_GENERIC_TIME
#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
unsigned long (*offset)(void);
#endif
};
......
arch/arm/include/asm/pci.h
浏览文件 @ 1d3c6ff4
......@@ -4,8 +4,23 @@
#ifdef __KERNEL__
#include <asm-generic/pci-dma-compat.h>
#include <asm/mach/pci.h> /* for pci_sys_data */
#include <mach/hardware.h> /* for PCIBIOS_MIN_* */
#ifdef CONFIG_PCI_DOMAINS
static inline int pci_domain_nr(struct pci_bus *bus)
{
struct pci_sys_data *root = bus->sysdata;
return root->domain;
}
static inline int pci_proc_domain(struct pci_bus *bus)
{
return pci_domain_nr(bus);
}
#endif /* CONFIG_PCI_DOMAINS */
#ifdef CONFIG_PCI_HOST_ITE8152
/* ITE bridge requires setting latency timer to avoid early bus access
termination by PIC bus mater devices
......
arch/arm/include/asm/perf_event.h
浏览文件 @ 1d3c6ff4
......@@ -28,4 +28,21 @@ set_perf_event_pending(void)
* same indexes here for consistency. */
#define PERF_EVENT_INDEX_OFFSET 1
/* ARM perf PMU IDs for use by internal perf clients. */
enum arm_perf_pmu_ids {
ARM_PERF_PMU_ID_XSCALE1 = 0,
ARM_PERF_PMU_ID_XSCALE2,
ARM_PERF_PMU_ID_V6,
ARM_PERF_PMU_ID_V6MP,
ARM_PERF_PMU_ID_CA8,
ARM_PERF_PMU_ID_CA9,
ARM_NUM_PMU_IDS,
};
extern enum arm_perf_pmu_ids
armpmu_get_pmu_id(void);
extern int
armpmu_get_max_events(void);
#endif /* __ARM_PERF_EVENT_H__ */
arch/arm/include/asm/pgtable.h
浏览文件 @ 1d3c6ff4
......@@ -314,7 +314,7 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
#define pgprot_writecombine(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
#if __LINUX_ARM_ARCH__ >= 7
#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
#define pgprot_dmacoherent(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE)
#else
......
arch/arm/include/asm/pmu.h
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/include/asm/scatterlist.h
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/include/asm/smp.h
浏览文件 @ 1d3c6ff4
......@@ -82,7 +82,7 @@ struct secondary_data {
extern struct secondary_data secondary_data;
extern int __cpu_disable(void);
extern int mach_cpu_disable(unsigned int cpu);
extern int platform_cpu_disable(unsigned int cpu);
extern void __cpu_die(unsigned int cpu);
extern void cpu_die(void);
......
arch/arm/include/asm/system.h
浏览文件 @ 1d3c6ff4
......@@ -141,7 +141,7 @@ extern unsigned int user_debug;
#ifdef CONFIG_ARCH_HAS_BARRIERS
#include <mach/barriers.h>
#elif __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
#elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP)
#define mb() do { dsb(); outer_sync(); } while (0)
#define rmb() dmb()
#define wmb() mb()
......
arch/arm/kernel/bios32.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/kernel/dma.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/kernel/perf_event.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/kernel/pmu.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/kernel/smp.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/kernel/time.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-at91/Kconfig
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-at91/Makefile
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-at91/board-stamp9g20.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-bcmring/arch.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-clps711x/mm.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-cns3xxx/Kconfig 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-cns3xxx/Makefile 0 → 100644
浏览文件 @ 1d3c6ff4
obj-$(CONFIG_ARCH_CNS3XXX) += core.o pm.o
obj-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o
arch/arm/mach-cns3xxx/Makefile.boot 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-cns3xxx/cns3420vb.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-cns3xxx/core.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-cns3xxx/core.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-cns3xxx/include/mach/cns3xxx.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-cns3xxx/include/mach/debug-macro.S 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-cns3xxx/include/mach/entry-macro.S 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-cns3xxx/include/mach/hardware.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-cns3xxx/include/mach/io.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-cns3xxx/include/mach/irqs.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-cns3xxx/include/mach/memory.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-cns3xxx/include/mach/system.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-cns3xxx/include/mach/timex.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-cns3xxx/include/mach/uncompress.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-cns3xxx/include/mach/vmalloc.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-cns3xxx/pm.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-ep93xx/adssphere.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-ep93xx/clock.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-ep93xx/core.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-ep93xx/edb93xx.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-ep93xx/gesbc9312.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-ep93xx/micro9.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-ep93xx/simone.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-ep93xx/snappercl15.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-ep93xx/ts72xx.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-integrator/Kconfig
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-integrator/Makefile
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-integrator/common.h 已删除 100644 → 0
浏览文件 @ 7c7cbaf5
此差异已折叠。
arch/arm/mach-integrator/core.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-integrator/cpu.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-integrator/impd1.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-integrator/leds.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-integrator/pci_v3.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-iop32x/n2100.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-ixp4xx/common.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-kirkwood/Kconfig
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-kirkwood/Makefile
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-kirkwood/guruplug-setup.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-kirkwood/netxbig_v2-setup.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-mmp/aspenite.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-mmp/include/mach/regs-smc.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-mmp/jasper.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-mmp/mmp2.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-mmp/pxa168.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-msm/Kconfig
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-nomadik/Kconfig
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-nomadik/Makefile
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-nomadik/clock.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-nomadik/clock.h
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-nomadik/cpu-8815.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-omap2/devices.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-omap2/omap_hwmod.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/Kconfig
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/Makefile
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/cm-x300.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/colibri-pxa3xx.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/corgi.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/corgi_lcd.c 已删除 100644 → 0
浏览文件 @ 7c7cbaf5
此差异已折叠。
arch/arm/mach-pxa/corgi_pm.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/corgi_ssp.c 已删除 100644 → 0
浏览文件 @ 7c7cbaf5
此差异已折叠。
arch/arm/mach-pxa/csb726.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/em-x270.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/generic.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h 已删除 100644 → 0
浏览文件 @ 7c7cbaf5
此差异已折叠。
arch/arm/mach-pxa/include/mach/ssp.h 已删除 100644 → 0
浏览文件 @ 7c7cbaf5
此差异已折叠。
arch/arm/mach-pxa/include/mach/vpac270.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/include/mach/z2.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/littleton.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/lubbock.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/mfp-pxa2xx.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/mioa701.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/mxm8x10.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/palmld.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/palmt5.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/palmtc.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/palmtx.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/poodle.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/pxa3xx.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/raumfeld.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/sharpsl.h
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/sharpsl_pm.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/spitz.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/spitz_pm.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/stargate2.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/tosa.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/trizeps4.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/vpac270.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/z2.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/zeus.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-pxa/zylonite.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-realview/Makefile
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-realview/clock.c 已删除 100644 → 0
浏览文件 @ 7c7cbaf5
此差异已折叠。
arch/arm/mach-realview/clock.h 已删除 100644 → 0
浏览文件 @ 7c7cbaf5
此差异已折叠。
arch/arm/mach-realview/core.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-realview/hotplug.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-s3c2410/Kconfig
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-s3c2410/mach-bast.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-s3c2410/mach-h1940.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-s3c2410/mach-n30.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-s3c2410/mach-qt2410.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-s3c2410/mach-vr1000.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-s3c2410/s3c2410.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-s3c2412/Kconfig
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-s3c2412/mach-jive.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-s3c2416/Kconfig 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-s3c2416/Makefile 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-s3c2416/clock.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-s3c2416/irq.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-s3c2416/mach-smdk2416.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-s3c2416/s3c2416.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-s3c2440/Kconfig
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-s3c2440/mach-osiris.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-s3c2440/s3c2440.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-s3c2443/Kconfig
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-s3c2443/clock.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-s3c64xx/gpiolib.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-s5p6440/gpio.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-shmobile/Kconfig
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/Kconfig 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/Kconfig300 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/Kconfig310 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/Kconfig320 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/Makefile 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/Makefile.boot 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/clock.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/include/mach/clkdev.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/include/mach/debug-macro.S 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/include/mach/entry-macro.S 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/include/mach/generic.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/include/mach/gpio.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/include/mach/hardware.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/include/mach/io.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/include/mach/irqs.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/include/mach/memory.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/include/mach/misc_regs.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/include/mach/spear.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/include/mach/spear300.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/include/mach/spear310.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/include/mach/spear320.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/include/mach/system.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/include/mach/timex.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/include/mach/uncompress.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/include/mach/vmalloc.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/spear300.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/spear300_evb.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/spear310.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/spear310_evb.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/spear320.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/spear320_evb.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear3xx/spear3xx.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear6xx/Kconfig 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear6xx/Kconfig600 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear6xx/Makefile 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear6xx/Makefile.boot 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear6xx/clock.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear6xx/include/mach/clkdev.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear6xx/include/mach/debug-macro.S 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear6xx/include/mach/entry-macro.S 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear6xx/include/mach/generic.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear6xx/include/mach/gpio.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear6xx/include/mach/hardware.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear6xx/include/mach/io.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear6xx/include/mach/irqs.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear6xx/include/mach/memory.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear6xx/include/mach/misc_regs.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear6xx/include/mach/spear.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear6xx/include/mach/spear600.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear6xx/include/mach/system.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear6xx/include/mach/timex.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear6xx/include/mach/uncompress.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear6xx/include/mach/vmalloc.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear6xx/spear600.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear6xx/spear600_evb.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-spear6xx/spear6xx.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-u300/mmc.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-ux500/Kconfig
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-ux500/Makefile
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-ux500/board-mop500.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-ux500/board-u5500.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-ux500/clock.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-ux500/clock.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-ux500/cpu-db5500.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-ux500/cpu.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-ux500/devices-db5500.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-ux500/devices-db8500.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-ux500/devices.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-ux500/include/mach/db5500-regs.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-ux500/include/mach/db8500-regs.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-ux500/include/mach/devices.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-ux500/include/mach/gpio.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-ux500/platsmp.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-versatile/Makefile
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-versatile/clock.c 已删除 100644 → 0
浏览文件 @ 7c7cbaf5
此差异已折叠。
arch/arm/mach-versatile/core.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-vexpress/Kconfig 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-vexpress/Makefile 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-vexpress/Makefile.boot 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-vexpress/core.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-vexpress/ct-ca9x4.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-vexpress/headsmp.S 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-vexpress/include/mach/clkdev.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-vexpress/include/mach/ct-ca9x4.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-vexpress/include/mach/debug-macro.S 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-vexpress/include/mach/entry-macro.S 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-vexpress/include/mach/hardware.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-vexpress/include/mach/io.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-vexpress/include/mach/irqs.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-vexpress/include/mach/memory.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-vexpress/include/mach/motherboard.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-vexpress/include/mach/smp.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-vexpress/include/mach/system.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-vexpress/include/mach/timex.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-vexpress/include/mach/uncompress.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-vexpress/include/mach/vmalloc.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-vexpress/platsmp.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mach-vexpress/v2m.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mm/Kconfig
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mm/abort-ev7.S
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mm/alignment.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mm/cache-l2x0.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mm/copypage-fa.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mm/fault-armv.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mm/fault.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mm/init.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mm/mm.h
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/mm/mmu.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/nwfpe/fpmodule.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/oprofile/Makefile
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/oprofile/backtrace.c 已删除 100644 → 0
浏览文件 @ 7c7cbaf5
此差异已折叠。
arch/arm/oprofile/common.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/oprofile/op_arm_model.h 已删除 100644 → 0
浏览文件 @ 7c7cbaf5
此差异已折叠。
arch/arm/oprofile/op_counter.h 已删除 100644 → 0
浏览文件 @ 7c7cbaf5
此差异已折叠。
arch/arm/oprofile/op_model_arm11_core.c 已删除 100644 → 0
浏览文件 @ 7c7cbaf5
此差异已折叠。
arch/arm/oprofile/op_model_arm11_core.h 已删除 100644 → 0
浏览文件 @ 7c7cbaf5
此差异已折叠。
arch/arm/oprofile/op_model_mpcore.c 已删除 100644 → 0
浏览文件 @ 7c7cbaf5
此差异已折叠。
arch/arm/oprofile/op_model_mpcore.h 已删除 100644 → 0
浏览文件 @ 7c7cbaf5
此差异已折叠。
arch/arm/oprofile/op_model_v6.c 已删除 100644 → 0
浏览文件 @ 7c7cbaf5
此差异已折叠。
arch/arm/oprofile/op_model_v7.c 已删除 100644 → 0
浏览文件 @ 7c7cbaf5
此差异已折叠。
arch/arm/oprofile/op_model_v7.h 已删除 100644 → 0
浏览文件 @ 7c7cbaf5
此差异已折叠。
arch/arm/oprofile/op_model_xscale.c 已删除 100644 → 0
浏览文件 @ 7c7cbaf5
此差异已折叠。
arch/arm/plat-iop/Makefile
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-iop/pmu.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-nomadik/Kconfig
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-nomadik/Makefile
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-nomadik/include/plat/gpio.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-nomadik/timer.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-pxa/Kconfig
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-pxa/Makefile
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-pxa/mfp.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-pxa/pmu.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-s3c24xx/Kconfig
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-s3c24xx/Makefile
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-s3c24xx/common-smdk.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-s3c24xx/cpu.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-s3c24xx/gpio.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-s3c24xx/gpiolib.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-s3c24xx/include/plat/s3c2416.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-s3c24xx/pm.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-s3c24xx/s3c2443-clock.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-s3c24xx/setup-i2c.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-samsung/clock.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-samsung/gpio-config.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-samsung/include/plat/pll6553x.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-spear/Kconfig 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-spear/Makefile 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-spear/clock.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-spear/include/plat/clkdev.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-spear/include/plat/clock.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-spear/include/plat/debug-macro.S 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-spear/include/plat/gpio.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-spear/include/plat/io.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-spear/include/plat/memory.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-spear/include/plat/padmux.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-spear/include/plat/shirq.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-spear/include/plat/system.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-spear/include/plat/timex.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-spear/include/plat/uncompress.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-spear/include/plat/vmalloc.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-spear/padmux.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-spear/shirq.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-spear/time.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-versatile/Makefile 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-versatile/include/plat/clock.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-versatile/include/plat/timer-sp.h 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-versatile/sched-clock.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
arch/arm/plat-versatile/timer-sp.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
drivers/i2c/busses/Kconfig
浏览文件 @ 1d3c6ff4
此差异已折叠。
drivers/input/keyboard/Kconfig
浏览文件 @ 1d3c6ff4
此差异已折叠。
drivers/input/keyboard/Makefile
浏览文件 @ 1d3c6ff4
此差异已折叠。
drivers/input/keyboard/corgikbd.c 已删除 100644 → 0
浏览文件 @ 7c7cbaf5
此差异已折叠。
drivers/input/keyboard/spitzkbd.c 已删除 100644 → 0
浏览文件 @ 7c7cbaf5
此差异已折叠。
drivers/input/keyboard/tosakbd.c 已删除 100644 → 0
浏览文件 @ 7c7cbaf5
此差异已折叠。
drivers/input/touchscreen/Kconfig
浏览文件 @ 1d3c6ff4
此差异已折叠。
drivers/input/touchscreen/Makefile
浏览文件 @ 1d3c6ff4
此差异已折叠。
drivers/input/touchscreen/corgi_ts.c 已删除 100644 → 0
浏览文件 @ 7c7cbaf5
此差异已折叠。
drivers/mmc/host/mmci.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
drivers/mmc/host/mmci.h
浏览文件 @ 1d3c6ff4
此差异已折叠。
drivers/mmc/host/pxamci.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
drivers/pcmcia/Kconfig
浏览文件 @ 1d3c6ff4
此差异已折叠。
drivers/pcmcia/Makefile
浏览文件 @ 1d3c6ff4
此差异已折叠。
drivers/pcmcia/pxa2xx_vpac270.c 0 → 100644
浏览文件 @ 1d3c6ff4
此差异已折叠。
drivers/serial/Kconfig
浏览文件 @ 1d3c6ff4
此差异已折叠。
drivers/serial/atmel_serial.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
drivers/spi/pxa2xx_spi.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
drivers/usb/gadget/at91_udc.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
include/linux/amba/mmci.h
浏览文件 @ 1d3c6ff4
此差异已折叠。
sound/soc/pxa/Kconfig
浏览文件 @ 1d3c6ff4
此差异已折叠。
sound/soc/pxa/pxa-ssp.c
浏览文件 @ 1d3c6ff4
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或