net/trivial: replace numeric with standard PM state macros

Use standard PM state macros PCI_Dx instead of numeric 0/1/2..
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/8390/ne2k-pci.c

@@ -676,7 +676,7 @@ static int ne2k_pci_resume (struct pci_dev *pdev)
 	struct net_device *dev = pci_get_drvdata (pdev);
 	int rc;
 
-	pci_set_power_state(pdev, 0);
+	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
 
 	rc = pci_enable_device(pdev);

drivers/net/ethernet/emulex/benet/be_main.c

@@ -4364,7 +4364,7 @@ static int be_resume(struct pci_dev *pdev)
 	if (status)
 		return status;
 
-	pci_set_power_state(pdev, 0);
+	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
 
 	/* tell fw we're ready to fire cmds */
@@ -4460,7 +4460,7 @@ static pci_ers_result_t be_eeh_reset(struct pci_dev *pdev)
 		return PCI_ERS_RESULT_DISCONNECT;
 
 	pci_set_master(pdev);
-	pci_set_power_state(pdev, 0);
+	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
 
 	/* Check if card is ok and fw is ready */

drivers/net/ethernet/intel/e100.c

@@ -3069,7 +3069,7 @@ static int e100_resume(struct pci_dev *pdev)
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
 	/* ack any pending wake events, disable PME */
-	pci_enable_wake(pdev, 0, 0);
+	pci_enable_wake(pdev, PCI_D0, 0);
 
 	/* disable reverse auto-negotiation */
 	if (nic->phy == phy_82552_v) {
@@ -3160,7 +3160,7 @@ static void e100_io_resume(struct pci_dev *pdev)
 	struct nic *nic = netdev_priv(netdev);
 
 	/* ack any pending wake events, disable PME */
-	pci_enable_wake(pdev, 0, 0);
+	pci_enable_wake(pdev, PCI_D0, 0);
 
 	netif_device_attach(netdev);
 	if (netif_running(netdev)) {

drivers/net/ethernet/myricom/myri10ge/myri10ge.c

@@ -3299,7 +3299,7 @@ static int myri10ge_resume(struct pci_dev *pdev)
 	if (mgp == NULL)
 		return -EINVAL;
 	netdev = mgp->dev;
-	pci_set_power_state(pdev, 0);	/* zeros conf space as a side effect */
+	pci_set_power_state(pdev, PCI_D0);	/* zeros conf space as a side effect */
 	msleep(5);		/* give card time to respond */
 	pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
 	if (vendor == 0xffff) {

drivers/net/ethernet/realtek/8139cp.c

@@ -1817,7 +1817,7 @@ static int cp_set_eeprom(struct net_device *dev,
 /* Put the board into D3cold state and wait for WakeUp signal */
 static void cp_set_d3_state (struct cp_private *cp)
 {
-	pci_enable_wake (cp->pdev, 0, 1); /* Enable PME# generation */
+	pci_enable_wake(cp->pdev, PCI_D0, 1); /* Enable PME# generation */
 	pci_set_power_state (cp->pdev, PCI_D3hot);
 }
 

drivers/net/ethernet/ti/tlan.c

@@ -372,7 +372,7 @@ static int tlan_resume(struct pci_dev *pdev)
 
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
-	pci_enable_wake(pdev, 0, 0);
+	pci_enable_wake(pdev, PCI_D0, 0);
 	netif_device_attach(dev);
 
 	if (netif_running(dev))

drivers/net/ethernet/via/via-velocity.c

@@ -3211,7 +3211,7 @@ static int velocity_resume(struct device *dev)
 	velocity_set_power_state(vptr, PCI_D0);
 
 	if (vptr->pdev) {
-		pci_enable_wake(vptr->pdev, 0, 0);
+		pci_enable_wake(vptr->pdev, PCI_D0, 0);
 		pci_restore_state(vptr->pdev);
 	}
 

drivers/net/wireless/orinoco/orinoco_pci.h

@@ -38,7 +38,7 @@ static int orinoco_pci_resume(struct pci_dev *pdev)
 	struct net_device *dev = priv->ndev;
 	int err;
 
-	pci_set_power_state(pdev, 0);
+	pci_set_power_state(pdev, PCI_D0);
 	err = pci_enable_device(pdev);
 	if (err) {
 		printk(KERN_ERR "%s: pci_enable_device failed on resume\n",