提交 1c44f5f1 编写于 作者: P Philipp Zabel 提交者: Linus Torvalds

gpiolib support for the PXA architecture

This adds gpiolib support for the PXA architecture:
  - move all GPIO API functions from generic.c into gpio.c
  - convert the gpio_get/set_value macros into inline functions

This makes it easier to hook up GPIOs provided by external chips like
ASICs and CPLDs.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Eric Miao <eric.miao@marvell.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
[ Minor ARM fixup from David Brownell folded into this ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 7c2db759
......@@ -385,6 +385,7 @@ config ARCH_PXA
depends on MMU
select ARCH_MTD_XIP
select GENERIC_GPIO
select HAVE_GPIO_LIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
......
......@@ -3,7 +3,8 @@
#
# Common support (must be linked before board specific support)
obj-y += clock.o devices.o generic.o irq.o dma.o time.o
obj-y += clock.o devices.o generic.o irq.o dma.o \
time.o gpio.o
obj-$(CONFIG_PXA25x) += pxa25x.o
obj-$(CONFIG_PXA27x) += pxa27x.o
obj-$(CONFIG_PXA3xx) += pxa3xx.o mfp.o smemc.o
......
......@@ -32,7 +32,6 @@
#include <asm/mach/map.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/gpio.h>
#include "generic.h"
......@@ -66,97 +65,6 @@ unsigned int get_memclk_frequency_10khz(void)
}
EXPORT_SYMBOL(get_memclk_frequency_10khz);
/*
* Handy function to set GPIO alternate functions
*/
int pxa_last_gpio;
int pxa_gpio_mode(int gpio_mode)
{
unsigned long flags;
int gpio = gpio_mode & GPIO_MD_MASK_NR;
int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
int gafr;
if (gpio > pxa_last_gpio)
return -EINVAL;
local_irq_save(flags);
if (gpio_mode & GPIO_DFLT_LOW)
GPCR(gpio) = GPIO_bit(gpio);
else if (gpio_mode & GPIO_DFLT_HIGH)
GPSR(gpio) = GPIO_bit(gpio);
if (gpio_mode & GPIO_MD_MASK_DIR)
GPDR(gpio) |= GPIO_bit(gpio);
else
GPDR(gpio) &= ~GPIO_bit(gpio);
gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2));
local_irq_restore(flags);
return 0;
}
EXPORT_SYMBOL(pxa_gpio_mode);
int gpio_direction_input(unsigned gpio)
{
unsigned long flags;
u32 mask;
if (gpio > pxa_last_gpio)
return -EINVAL;
mask = GPIO_bit(gpio);
local_irq_save(flags);
GPDR(gpio) &= ~mask;
local_irq_restore(flags);
return 0;
}
EXPORT_SYMBOL(gpio_direction_input);
int gpio_direction_output(unsigned gpio, int value)
{
unsigned long flags;
u32 mask;
if (gpio > pxa_last_gpio)
return -EINVAL;
mask = GPIO_bit(gpio);
local_irq_save(flags);
if (value)
GPSR(gpio) = mask;
else
GPCR(gpio) = mask;
GPDR(gpio) |= mask;
local_irq_restore(flags);
return 0;
}
EXPORT_SYMBOL(gpio_direction_output);
/*
* Return GPIO level
*/
int pxa_gpio_get_value(unsigned gpio)
{
return __gpio_get_value(gpio);
}
EXPORT_SYMBOL(pxa_gpio_get_value);
/*
* Set output GPIO level
*/
void pxa_gpio_set_value(unsigned gpio, int value)
{
__gpio_set_value(gpio, value);
}
EXPORT_SYMBOL(pxa_gpio_set_value);
/*
* Routine to safely enable or disable a clock in the CKEN
*/
......@@ -172,7 +80,6 @@ void __pxa_set_cken(int clock, int enable)
local_irq_restore(flags);
}
EXPORT_SYMBOL(__pxa_set_cken);
/*
......
......@@ -16,6 +16,7 @@ extern void __init pxa_init_irq_low(void);
extern void __init pxa_init_irq_high(void);
extern void __init pxa_init_irq_gpio(int gpio_nr);
extern void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int));
extern void __init pxa_init_gpio(int gpio_nr);
extern void __init pxa25x_init_irq(void);
extern void __init pxa27x_init_irq(void);
extern void __init pxa3xx_init_irq(void);
......
/*
* linux/arch/arm/mach-pxa/gpio.c
*
* Generic PXA GPIO handling
*
* Author: Nicolas Pitre
* Created: Jun 15, 2001
* Copyright: MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <asm/gpio.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/arch/pxa-regs.h>
#include "generic.h"
struct pxa_gpio_chip {
struct gpio_chip chip;
void __iomem *regbase;
};
int pxa_last_gpio;
/*
* Configure pins for GPIO or other functions
*/
int pxa_gpio_mode(int gpio_mode)
{
unsigned long flags;
int gpio = gpio_mode & GPIO_MD_MASK_NR;
int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
int gafr;
if (gpio > pxa_last_gpio)
return -EINVAL;
local_irq_save(flags);
if (gpio_mode & GPIO_DFLT_LOW)
GPCR(gpio) = GPIO_bit(gpio);
else if (gpio_mode & GPIO_DFLT_HIGH)
GPSR(gpio) = GPIO_bit(gpio);
if (gpio_mode & GPIO_MD_MASK_DIR)
GPDR(gpio) |= GPIO_bit(gpio);
else
GPDR(gpio) &= ~GPIO_bit(gpio);
gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2));
local_irq_restore(flags);
return 0;
}
EXPORT_SYMBOL(pxa_gpio_mode);
static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
unsigned long flags;
u32 mask = 1 << offset;
u32 value;
struct pxa_gpio_chip *pxa;
void __iomem *gpdr;
pxa = container_of(chip, struct pxa_gpio_chip, chip);
gpdr = pxa->regbase + GPDR_OFFSET;
local_irq_save(flags);
value = __raw_readl(gpdr);
value &= ~mask;
__raw_writel(value, gpdr);
local_irq_restore(flags);
return 0;
}
static int pxa_gpio_direction_output(struct gpio_chip *chip,
unsigned offset, int value)
{
unsigned long flags;
u32 mask = 1 << offset;
u32 tmp;
struct pxa_gpio_chip *pxa;
void __iomem *gpdr;
pxa = container_of(chip, struct pxa_gpio_chip, chip);
__raw_writel(mask,
pxa->regbase + (value ? GPSR_OFFSET : GPCR_OFFSET));
gpdr = pxa->regbase + GPDR_OFFSET;
local_irq_save(flags);
tmp = __raw_readl(gpdr);
tmp |= mask;
__raw_writel(tmp, gpdr);
local_irq_restore(flags);
return 0;
}
/*
* Return GPIO level
*/
static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset)
{
u32 mask = 1 << offset;
struct pxa_gpio_chip *pxa;
pxa = container_of(chip, struct pxa_gpio_chip, chip);
return __raw_readl(pxa->regbase + GPLR_OFFSET) & mask;
}
/*
* Set output GPIO level
*/
static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
u32 mask = 1 << offset;
struct pxa_gpio_chip *pxa;
pxa = container_of(chip, struct pxa_gpio_chip, chip);
if (value)
__raw_writel(mask, pxa->regbase + GPSR_OFFSET);
else
__raw_writel(mask, pxa->regbase + GPCR_OFFSET);
}
static struct pxa_gpio_chip pxa_gpio_chip[] = {
[0] = {
.regbase = GPIO0_BASE,
.chip = {
.label = "gpio-0",
.direction_input = pxa_gpio_direction_input,
.direction_output = pxa_gpio_direction_output,
.get = pxa_gpio_get,
.set = pxa_gpio_set,
.base = 0,
.ngpio = 32,
},
},
[1] = {
.regbase = GPIO1_BASE,
.chip = {
.label = "gpio-1",
.direction_input = pxa_gpio_direction_input,
.direction_output = pxa_gpio_direction_output,
.get = pxa_gpio_get,
.set = pxa_gpio_set,
.base = 32,
.ngpio = 32,
},
},
[2] = {
.regbase = GPIO2_BASE,
.chip = {
.label = "gpio-2",
.direction_input = pxa_gpio_direction_input,
.direction_output = pxa_gpio_direction_output,
.get = pxa_gpio_get,
.set = pxa_gpio_set,
.base = 64,
.ngpio = 32, /* 21 for PXA25x */
},
},
#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
[3] = {
.regbase = GPIO3_BASE,
.chip = {
.label = "gpio-3",
.direction_input = pxa_gpio_direction_input,
.direction_output = pxa_gpio_direction_output,
.get = pxa_gpio_get,
.set = pxa_gpio_set,
.base = 96,
.ngpio = 32,
},
},
#endif
};
void __init pxa_init_gpio(int gpio_nr)
{
int i;
/* add a GPIO chip for each register bank.
* the last PXA25x register only contains 21 GPIOs
*/
for (i = 0; i < gpio_nr; i += 32) {
if (i+32 > gpio_nr)
pxa_gpio_chip[i/32].chip.ngpio = gpio_nr - i;
gpiochip_add(&pxa_gpio_chip[i/32].chip);
}
}
......@@ -311,6 +311,8 @@ void __init pxa_init_irq_gpio(int gpio_nr)
/* Install handler for GPIO>=2 edge detect interrupts */
set_irq_chip(IRQ_GPIO_2_x, &pxa_internal_chip_low);
set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler);
pxa_init_gpio(gpio_nr);
}
void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int))
......
......@@ -28,43 +28,35 @@
#include <asm/irq.h>
#include <asm/hardware.h>
static inline int gpio_request(unsigned gpio, const char *label)
{
return 0;
}
#include <asm-generic/gpio.h>
static inline void gpio_free(unsigned gpio)
{
return;
}
extern int gpio_direction_input(unsigned gpio);
extern int gpio_direction_output(unsigned gpio, int value);
/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
* Those cases currently cause holes in the GPIO number space.
*/
#define NR_BUILTIN_GPIO 128
static inline int __gpio_get_value(unsigned gpio)
static inline int gpio_get_value(unsigned gpio)
{
return GPLR(gpio) & GPIO_bit(gpio);
if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
return GPLR(gpio) & GPIO_bit(gpio);
else
return __gpio_get_value(gpio);
}
#define gpio_get_value(gpio) \
(__builtin_constant_p(gpio) ? \
__gpio_get_value(gpio) : \
pxa_gpio_get_value(gpio))
static inline void __gpio_set_value(unsigned gpio, int value)
static inline void gpio_set_value(unsigned gpio, int value)
{
if (value)
GPSR(gpio) = GPIO_bit(gpio);
else
GPCR(gpio) = GPIO_bit(gpio);
if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
if (value)
GPSR(gpio) = GPIO_bit(gpio);
else
GPCR(gpio) = GPIO_bit(gpio);
} else {
__gpio_set_value(gpio, value);
}
}
#define gpio_set_value(gpio,value) \
(__builtin_constant_p(gpio) ? \
__gpio_set_value(gpio, value) : \
pxa_gpio_set_value(gpio, value))
#include <asm-generic/gpio.h> /* cansleep wrappers */
#define gpio_cansleep __gpio_cansleep
#define gpio_to_irq(gpio) IRQ_GPIO(gpio)
#define irq_to_gpio(irq) IRQ_TO_GPIO(irq)
......
......@@ -1131,6 +1131,19 @@
* General Purpose I/O
*/
#define GPIO0_BASE ((void __iomem *)io_p2v(0x40E00000))
#define GPIO1_BASE ((void __iomem *)io_p2v(0x40E00004))
#define GPIO2_BASE ((void __iomem *)io_p2v(0x40E00008))
#define GPIO3_BASE ((void __iomem *)io_p2v(0x40E00100))
#define GPLR_OFFSET 0x00
#define GPDR_OFFSET 0x0C
#define GPSR_OFFSET 0x18
#define GPCR_OFFSET 0x24
#define GRER_OFFSET 0x30
#define GFER_OFFSET 0x3C
#define GEDR_OFFSET 0x48
#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */
#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */
#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册