提交 1aaf2e59 编写于 作者: L Linus Torvalds

Merge branch 'x86-txt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-txt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, intel_txt: clean up the impact on generic code, unbreak non-x86
  x86, intel_txt: Handle ACPI_SLEEP without X86_TRAMPOLINE
  x86, intel_txt: Fix typos in Kconfig help
  x86, intel_txt: Factor out the code for S3 setup
  x86, intel_txt: tboot.c needs <asm/fixmap.h>
  intel_txt: Force IOMMU on for Intel TXT launch
  x86, intel_txt: Intel TXT Sx shutdown support
  x86, intel_txt: Intel TXT reboot/halt shutdown support
  x86, intel_txt: Intel TXT boot support
Intel(R) TXT Overview:
=====================
Intel's technology for safer computing, Intel(R) Trusted Execution
Technology (Intel(R) TXT), defines platform-level enhancements that
provide the building blocks for creating trusted platforms.
Intel TXT was formerly known by the code name LaGrande Technology (LT).
Intel TXT in Brief:
o Provides dynamic root of trust for measurement (DRTM)
o Data protection in case of improper shutdown
o Measurement and verification of launched environment
Intel TXT is part of the vPro(TM) brand and is also available some
non-vPro systems. It is currently available on desktop systems
based on the Q35, X38, Q45, and Q43 Express chipsets (e.g. Dell
Optiplex 755, HP dc7800, etc.) and mobile systems based on the GM45,
PM45, and GS45 Express chipsets.
For more information, see http://www.intel.com/technology/security/.
This site also has a link to the Intel TXT MLE Developers Manual,
which has been updated for the new released platforms.
Intel TXT has been presented at various events over the past few
years, some of which are:
LinuxTAG 2008:
http://www.linuxtag.org/2008/en/conf/events/vp-donnerstag/
details.html?talkid=110
TRUST2008:
http://www.trust2008.eu/downloads/Keynote-Speakers/
3_David-Grawrock_The-Front-Door-of-Trusted-Computing.pdf
IDF 2008, Shanghai:
http://inteldeveloperforum.com.edgesuite.net/shanghai_2008/
aep/PROS003/index.html
IDFs 2006, 2007 (I'm not sure if/where they are online)
Trusted Boot Project Overview:
=============================
Trusted Boot (tboot) is an open source, pre- kernel/VMM module that
uses Intel TXT to perform a measured and verified launch of an OS
kernel/VMM.
It is hosted on SourceForge at http://sourceforge.net/projects/tboot.
The mercurial source repo is available at http://www.bughost.org/
repos.hg/tboot.hg.
Tboot currently supports launching Xen (open source VMM/hypervisor
w/ TXT support since v3.2), and now Linux kernels.
Value Proposition for Linux or "Why should you care?"
=====================================================
While there are many products and technologies that attempt to
measure or protect the integrity of a running kernel, they all
assume the kernel is "good" to begin with. The Integrity
Measurement Architecture (IMA) and Linux Integrity Module interface
are examples of such solutions.
To get trust in the initial kernel without using Intel TXT, a
static root of trust must be used. This bases trust in BIOS
starting at system reset and requires measurement of all code
executed between system reset through the completion of the kernel
boot as well as data objects used by that code. In the case of a
Linux kernel, this means all of BIOS, any option ROMs, the
bootloader and the boot config. In practice, this is a lot of
code/data, much of which is subject to change from boot to boot
(e.g. changing NICs may change option ROMs). Without reference
hashes, these measurement changes are difficult to assess or
confirm as benign. This process also does not provide DMA
protection, memory configuration/alias checks and locks, crash
protection, or policy support.
By using the hardware-based root of trust that Intel TXT provides,
many of these issues can be mitigated. Specifically: many
pre-launch components can be removed from the trust chain, DMA
protection is provided to all launched components, a large number
of platform configuration checks are performed and values locked,
protection is provided for any data in the event of an improper
shutdown, and there is support for policy-based execution/verification.
This provides a more stable measurement and a higher assurance of
system configuration and initial state than would be otherwise
possible. Since the tboot project is open source, source code for
almost all parts of the trust chain is available (excepting SMM and
Intel-provided firmware).
How Does it Work?
=================
o Tboot is an executable that is launched by the bootloader as
the "kernel" (the binary the bootloader executes).
o It performs all of the work necessary to determine if the
platform supports Intel TXT and, if so, executes the GETSEC[SENTER]
processor instruction that initiates the dynamic root of trust.
- If tboot determines that the system does not support Intel TXT
or is not configured correctly (e.g. the SINIT AC Module was
incorrect), it will directly launch the kernel with no changes
to any state.
- Tboot will output various information about its progress to the
terminal, serial port, and/or an in-memory log; the output
locations can be configured with a command line switch.
o The GETSEC[SENTER] instruction will return control to tboot and
tboot then verifies certain aspects of the environment (e.g. TPM NV
lock, e820 table does not have invalid entries, etc.).
o It will wake the APs from the special sleep state the GETSEC[SENTER]
instruction had put them in and place them into a wait-for-SIPI
state.
- Because the processors will not respond to an INIT or SIPI when
in the TXT environment, it is necessary to create a small VT-x
guest for the APs. When they run in this guest, they will
simply wait for the INIT-SIPI-SIPI sequence, which will cause
VMEXITs, and then disable VT and jump to the SIPI vector. This
approach seemed like a better choice than having to insert
special code into the kernel's MP wakeup sequence.
o Tboot then applies an (optional) user-defined launch policy to
verify the kernel and initrd.
- This policy is rooted in TPM NV and is described in the tboot
project. The tboot project also contains code for tools to
create and provision the policy.
- Policies are completely under user control and if not present
then any kernel will be launched.
- Policy action is flexible and can include halting on failures
or simply logging them and continuing.
o Tboot adjusts the e820 table provided by the bootloader to reserve
its own location in memory as well as to reserve certain other
TXT-related regions.
o As part of it's launch, tboot DMA protects all of RAM (using the
VT-d PMRs). Thus, the kernel must be booted with 'intel_iommu=on'
in order to remove this blanket protection and use VT-d's
page-level protection.
o Tboot will populate a shared page with some data about itself and
pass this to the Linux kernel as it transfers control.
- The location of the shared page is passed via the boot_params
struct as a physical address.
o The kernel will look for the tboot shared page address and, if it
exists, map it.
o As one of the checks/protections provided by TXT, it makes a copy
of the VT-d DMARs in a DMA-protected region of memory and verifies
them for correctness. The VT-d code will detect if the kernel was
launched with tboot and use this copy instead of the one in the
ACPI table.
o At this point, tboot and TXT are out of the picture until a
shutdown (S<n>)
o In order to put a system into any of the sleep states after a TXT
launch, TXT must first be exited. This is to prevent attacks that
attempt to crash the system to gain control on reboot and steal
data left in memory.
- The kernel will perform all of its sleep preparation and
populate the shared page with the ACPI data needed to put the
platform in the desired sleep state.
- Then the kernel jumps into tboot via the vector specified in the
shared page.
- Tboot will clean up the environment and disable TXT, then use the
kernel-provided ACPI information to actually place the platform
into the desired sleep state.
- In the case of S3, tboot will also register itself as the resume
vector. This is necessary because it must re-establish the
measured environment upon resume. Once the TXT environment
has been restored, it will restore the TPM PCRs and then
transfer control back to the kernel's S3 resume vector.
In order to preserve system integrity across S3, the kernel
provides tboot with a set of memory ranges (kernel
code/data/bss, S3 resume code, and AP trampoline) that tboot
will calculate a MAC (message authentication code) over and then
seal with the TPM. On resume and once the measured environment
has been re-established, tboot will re-calculate the MAC and
verify it against the sealed value. Tboot's policy determines
what happens if the verification fails.
That's pretty much it for TXT support.
Configuring the System:
======================
This code works with 32bit, 32bit PAE, and 64bit (x86_64) kernels.
In BIOS, the user must enable: TPM, TXT, VT-x, VT-d. Not all BIOSes
allow these to be individually enabled/disabled and the screens in
which to find them are BIOS-specific.
grub.conf needs to be modified as follows:
title Linux 2.6.29-tip w/ tboot
root (hd0,0)
kernel /tboot.gz logging=serial,vga,memory
module /vmlinuz-2.6.29-tip intel_iommu=on ro
root=LABEL=/ rhgb console=ttyS0,115200 3
module /initrd-2.6.29-tip.img
module /Q35_SINIT_17.BIN
The kernel option for enabling Intel TXT support is found under the
Security top-level menu and is called "Enable Intel(R) Trusted
Execution Technology (TXT)". It is marked as EXPERIMENTAL and
depends on the generic x86 support (to allow maximum flexibility in
kernel build options), since the tboot code will detect whether the
platform actually supports Intel TXT and thus whether any of the
kernel code is executed.
The Q35_SINIT_17.BIN file is what Intel TXT refers to as an
Authenticated Code Module. It is specific to the chipset in the
system and can also be found on the Trusted Boot site. It is an
(unencrypted) module signed by Intel that is used as part of the
DRTM process to verify and configure the system. It is signed
because it operates at a higher privilege level in the system than
any other macrocode and its correct operation is critical to the
establishment of the DRTM. The process for determining the correct
SINIT ACM for a system is documented in the SINIT-guide.txt file
that is on the tboot SourceForge site under the SINIT ACM downloads.
......@@ -12,6 +12,7 @@ Offset Proto Name Meaning
000/040 ALL screen_info Text mode or frame buffer information
(struct screen_info)
040/014 ALL apm_bios_info APM BIOS information (struct apm_bios_info)
058/008 ALL tboot_addr Physical address of tboot shared page
060/010 ALL ist_info Intel SpeedStep (IST) BIOS support information
(struct ist_info)
080/010 ALL hd0_info hd0 disk parameter, OBSOLETE!!
......
......@@ -179,6 +179,10 @@ config ARCH_SUPPORTS_OPTIMIZED_INLINING
config ARCH_SUPPORTS_DEBUG_PAGEALLOC
def_bool y
config HAVE_INTEL_TXT
def_bool y
depends on EXPERIMENTAL && DMAR && ACPI
# Use the generic interrupt handling code in kernel/irq/:
config GENERIC_HARDIRQS
bool
......
......@@ -85,7 +85,8 @@ struct efi_info {
struct boot_params {
struct screen_info screen_info; /* 0x000 */
struct apm_bios_info apm_bios_info; /* 0x040 */
__u8 _pad2[12]; /* 0x054 */
__u8 _pad2[4]; /* 0x054 */
__u64 tboot_addr; /* 0x058 */
struct ist_info ist_info; /* 0x060 */
__u8 _pad3[16]; /* 0x070 */
__u8 hd0_info[16]; /* obsolete! */ /* 0x080 */
......
......@@ -131,6 +131,9 @@ enum fixed_addresses {
#endif
#ifdef CONFIG_X86_32
FIX_WP_TEST,
#endif
#ifdef CONFIG_INTEL_TXT
FIX_TBOOT_BASE,
#endif
__end_of_fixed_addresses
};
......
......@@ -52,6 +52,7 @@ obj-$(CONFIG_X86_DS_SELFTEST) += ds_selftest.o
obj-$(CONFIG_X86_32) += tls.o
obj-$(CONFIG_IA32_EMULATION) += tls.o
obj-y += step.o
obj-$(CONFIG_INTEL_TXT) += tboot.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-y += cpu/
obj-y += acpi/
......
......@@ -4,6 +4,7 @@
#include <linux/pm.h>
#include <linux/efi.h>
#include <linux/dmi.h>
#include <linux/tboot.h>
#include <acpi/reboot.h>
#include <asm/io.h>
#include <asm/apic.h>
......@@ -508,6 +509,8 @@ static void native_machine_emergency_restart(void)
if (reboot_emergency)
emergency_vmx_disable_all();
tboot_shutdown(TB_SHUTDOWN_REBOOT);
/* Tell the BIOS if we want cold or warm reboot */
*((unsigned short *)__va(0x472)) = reboot_mode;
......@@ -634,6 +637,8 @@ static void native_machine_halt(void)
/* stop other cpus and apics */
machine_shutdown();
tboot_shutdown(TB_SHUTDOWN_HALT);
/* stop this cpu */
stop_this_cpu(NULL);
}
......@@ -645,6 +650,8 @@ static void native_machine_power_off(void)
machine_shutdown();
pm_power_off();
}
/* a fallback in case there is no PM info available */
tboot_shutdown(TB_SHUTDOWN_HALT);
}
struct machine_ops machine_ops = {
......
......@@ -66,6 +66,7 @@
#include <linux/percpu.h>
#include <linux/crash_dump.h>
#include <linux/tboot.h>
#include <video/edid.h>
......@@ -977,6 +978,8 @@ void __init setup_arch(char **cmdline_p)
paravirt_pagetable_setup_done(swapper_pg_dir);
paravirt_post_allocator_init();
tboot_probe();
#ifdef CONFIG_X86_64
map_vsyscall();
#endif
......
......@@ -47,6 +47,7 @@
#include <linux/bootmem.h>
#include <linux/err.h>
#include <linux/nmi.h>
#include <linux/tboot.h>
#include <asm/acpi.h>
#include <asm/desc.h>
......@@ -1318,6 +1319,7 @@ void play_dead_common(void)
void native_play_dead(void)
{
play_dead_common();
tboot_shutdown(TB_SHUTDOWN_WFS);
wbinvd_halt();
}
......
/*
* tboot.c: main implementation of helper functions used by kernel for
* runtime support of Intel(R) Trusted Execution Technology
*
* Copyright (c) 2006-2009, Intel Corporation
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
*/
#include <linux/dma_remapping.h>
#include <linux/init_task.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/dmar.h>
#include <linux/cpu.h>
#include <linux/pfn.h>
#include <linux/mm.h>
#include <linux/tboot.h>
#include <asm/trampoline.h>
#include <asm/processor.h>
#include <asm/bootparam.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/fixmap.h>
#include <asm/proto.h>
#include <asm/setup.h>
#include <asm/e820.h>
#include <asm/io.h>
#include "acpi/realmode/wakeup.h"
/* Global pointer to shared data; NULL means no measured launch. */
struct tboot *tboot __read_mostly;
/* timeout for APs (in secs) to enter wait-for-SIPI state during shutdown */
#define AP_WAIT_TIMEOUT 1
#undef pr_fmt
#define pr_fmt(fmt) "tboot: " fmt
static u8 tboot_uuid[16] __initdata = TBOOT_UUID;
void __init tboot_probe(void)
{
/* Look for valid page-aligned address for shared page. */
if (!boot_params.tboot_addr)
return;
/*
* also verify that it is mapped as we expect it before calling
* set_fixmap(), to reduce chance of garbage value causing crash
*/
if (!e820_any_mapped(boot_params.tboot_addr,
boot_params.tboot_addr, E820_RESERVED)) {
pr_warning("non-0 tboot_addr but it is not of type E820_RESERVED\n");
return;
}
/* only a natively booted kernel should be using TXT */
if (paravirt_enabled()) {
pr_warning("non-0 tboot_addr but pv_ops is enabled\n");
return;
}
/* Map and check for tboot UUID. */
set_fixmap(FIX_TBOOT_BASE, boot_params.tboot_addr);
tboot = (struct tboot *)fix_to_virt(FIX_TBOOT_BASE);
if (memcmp(&tboot_uuid, &tboot->uuid, sizeof(tboot->uuid))) {
pr_warning("tboot at 0x%llx is invalid\n",
boot_params.tboot_addr);
tboot = NULL;
return;
}
if (tboot->version < 5) {
pr_warning("tboot version is invalid: %u\n", tboot->version);
tboot = NULL;
return;
}
pr_info("found shared page at phys addr 0x%llx:\n",
boot_params.tboot_addr);
pr_debug("version: %d\n", tboot->version);
pr_debug("log_addr: 0x%08x\n", tboot->log_addr);
pr_debug("shutdown_entry: 0x%x\n", tboot->shutdown_entry);
pr_debug("tboot_base: 0x%08x\n", tboot->tboot_base);
pr_debug("tboot_size: 0x%x\n", tboot->tboot_size);
}
static pgd_t *tboot_pg_dir;
static struct mm_struct tboot_mm = {
.mm_rb = RB_ROOT,
.pgd = swapper_pg_dir,
.mm_users = ATOMIC_INIT(2),
.mm_count = ATOMIC_INIT(1),
.mmap_sem = __RWSEM_INITIALIZER(init_mm.mmap_sem),
.page_table_lock = __SPIN_LOCK_UNLOCKED(init_mm.page_table_lock),
.mmlist = LIST_HEAD_INIT(init_mm.mmlist),
.cpu_vm_mask = CPU_MASK_ALL,
};
static inline void switch_to_tboot_pt(void)
{
write_cr3(virt_to_phys(tboot_pg_dir));
}
static int map_tboot_page(unsigned long vaddr, unsigned long pfn,
pgprot_t prot)
{
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
pte_t *pte;
pgd = pgd_offset(&tboot_mm, vaddr);
pud = pud_alloc(&tboot_mm, pgd, vaddr);
if (!pud)
return -1;
pmd = pmd_alloc(&tboot_mm, pud, vaddr);
if (!pmd)
return -1;
pte = pte_alloc_map(&tboot_mm, pmd, vaddr);
if (!pte)
return -1;
set_pte_at(&tboot_mm, vaddr, pte, pfn_pte(pfn, prot));
pte_unmap(pte);
return 0;
}
static int map_tboot_pages(unsigned long vaddr, unsigned long start_pfn,
unsigned long nr)
{
/* Reuse the original kernel mapping */
tboot_pg_dir = pgd_alloc(&tboot_mm);
if (!tboot_pg_dir)
return -1;
for (; nr > 0; nr--, vaddr += PAGE_SIZE, start_pfn++) {
if (map_tboot_page(vaddr, start_pfn, PAGE_KERNEL_EXEC))
return -1;
}
return 0;
}
static void tboot_create_trampoline(void)
{
u32 map_base, map_size;
/* Create identity map for tboot shutdown code. */
map_base = PFN_DOWN(tboot->tboot_base);
map_size = PFN_UP(tboot->tboot_size);
if (map_tboot_pages(map_base << PAGE_SHIFT, map_base, map_size))
panic("tboot: Error mapping tboot pages (mfns) @ 0x%x, 0x%x\n",
map_base, map_size);
}
#ifdef CONFIG_ACPI_SLEEP
static void add_mac_region(phys_addr_t start, unsigned long size)
{
struct tboot_mac_region *mr;
phys_addr_t end = start + size;
if (start && size) {
mr = &tboot->mac_regions[tboot->num_mac_regions++];
mr->start = round_down(start, PAGE_SIZE);
mr->size = round_up(end, PAGE_SIZE) - mr->start;
}
}
static int tboot_setup_sleep(void)
{
tboot->num_mac_regions = 0;
/* S3 resume code */
add_mac_region(acpi_wakeup_address, WAKEUP_SIZE);
#ifdef CONFIG_X86_TRAMPOLINE
/* AP trampoline code */
add_mac_region(virt_to_phys(trampoline_base), TRAMPOLINE_SIZE);
#endif
/* kernel code + data + bss */
add_mac_region(virt_to_phys(_text), _end - _text);
tboot->acpi_sinfo.kernel_s3_resume_vector = acpi_wakeup_address;
return 0;
}
#else /* no CONFIG_ACPI_SLEEP */
static int tboot_setup_sleep(void)
{
/* S3 shutdown requested, but S3 not supported by the kernel... */
BUG();
return -1;
}
#endif
void tboot_shutdown(u32 shutdown_type)
{
void (*shutdown)(void);
if (!tboot_enabled())
return;
/*
* if we're being called before the 1:1 mapping is set up then just
* return and let the normal shutdown happen; this should only be
* due to very early panic()
*/
if (!tboot_pg_dir)
return;
/* if this is S3 then set regions to MAC */
if (shutdown_type == TB_SHUTDOWN_S3)
if (tboot_setup_sleep())
return;
tboot->shutdown_type = shutdown_type;
switch_to_tboot_pt();
shutdown = (void(*)(void))(unsigned long)tboot->shutdown_entry;
shutdown();
/* should not reach here */
while (1)
halt();
}
static void tboot_copy_fadt(const struct acpi_table_fadt *fadt)
{
#define TB_COPY_GAS(tbg, g) \
tbg.space_id = g.space_id; \
tbg.bit_width = g.bit_width; \
tbg.bit_offset = g.bit_offset; \
tbg.access_width = g.access_width; \
tbg.address = g.address;
TB_COPY_GAS(tboot->acpi_sinfo.pm1a_cnt_blk, fadt->xpm1a_control_block);
TB_COPY_GAS(tboot->acpi_sinfo.pm1b_cnt_blk, fadt->xpm1b_control_block);
TB_COPY_GAS(tboot->acpi_sinfo.pm1a_evt_blk, fadt->xpm1a_event_block);
TB_COPY_GAS(tboot->acpi_sinfo.pm1b_evt_blk, fadt->xpm1b_event_block);
/*
* We need phys addr of waking vector, but can't use virt_to_phys() on
* &acpi_gbl_FACS because it is ioremap'ed, so calc from FACS phys
* addr.
*/
tboot->acpi_sinfo.wakeup_vector = fadt->facs +
offsetof(struct acpi_table_facs, firmware_waking_vector);
}
void tboot_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control)
{
static u32 acpi_shutdown_map[ACPI_S_STATE_COUNT] = {
/* S0,1,2: */ -1, -1, -1,
/* S3: */ TB_SHUTDOWN_S3,
/* S4: */ TB_SHUTDOWN_S4,
/* S5: */ TB_SHUTDOWN_S5 };
if (!tboot_enabled())
return;
tboot_copy_fadt(&acpi_gbl_FADT);
tboot->acpi_sinfo.pm1a_cnt_val = pm1a_control;
tboot->acpi_sinfo.pm1b_cnt_val = pm1b_control;
/* we always use the 32b wakeup vector */
tboot->acpi_sinfo.vector_width = 32;
if (sleep_state >= ACPI_S_STATE_COUNT ||
acpi_shutdown_map[sleep_state] == -1) {
pr_warning("unsupported sleep state 0x%x\n", sleep_state);
return;
}
tboot_shutdown(acpi_shutdown_map[sleep_state]);
}
static atomic_t ap_wfs_count;
static int tboot_wait_for_aps(int num_aps)
{
unsigned long timeout;
timeout = AP_WAIT_TIMEOUT*HZ;
while (atomic_read((atomic_t *)&tboot->num_in_wfs) != num_aps &&
timeout) {
mdelay(1);
timeout--;
}
if (timeout)
pr_warning("tboot wait for APs timeout\n");
return !(atomic_read((atomic_t *)&tboot->num_in_wfs) == num_aps);
}
static int __cpuinit tboot_cpu_callback(struct notifier_block *nfb,
unsigned long action, void *hcpu)
{
switch (action) {
case CPU_DYING:
atomic_inc(&ap_wfs_count);
if (num_online_cpus() == 1)
if (tboot_wait_for_aps(atomic_read(&ap_wfs_count)))
return NOTIFY_BAD;
break;
}
return NOTIFY_OK;
}
static struct notifier_block tboot_cpu_notifier __cpuinitdata =
{
.notifier_call = tboot_cpu_callback,
};
static __init int tboot_late_init(void)
{
if (!tboot_enabled())
return 0;
tboot_create_trampoline();
atomic_set(&ap_wfs_count, 0);
register_hotcpu_notifier(&tboot_cpu_notifier);
return 0;
}
late_initcall(tboot_late_init);
/*
* TXT configuration registers (offsets from TXT_{PUB, PRIV}_CONFIG_REGS_BASE)
*/
#define TXT_PUB_CONFIG_REGS_BASE 0xfed30000
#define TXT_PRIV_CONFIG_REGS_BASE 0xfed20000
/* # pages for each config regs space - used by fixmap */
#define NR_TXT_CONFIG_PAGES ((TXT_PUB_CONFIG_REGS_BASE - \
TXT_PRIV_CONFIG_REGS_BASE) >> PAGE_SHIFT)
/* offsets from pub/priv config space */
#define TXTCR_HEAP_BASE 0x0300
#define TXTCR_HEAP_SIZE 0x0308
#define SHA1_SIZE 20
struct sha1_hash {
u8 hash[SHA1_SIZE];
};
struct sinit_mle_data {
u32 version; /* currently 6 */
struct sha1_hash bios_acm_id;
u32 edx_senter_flags;
u64 mseg_valid;
struct sha1_hash sinit_hash;
struct sha1_hash mle_hash;
struct sha1_hash stm_hash;
struct sha1_hash lcp_policy_hash;
u32 lcp_policy_control;
u32 rlp_wakeup_addr;
u32 reserved;
u32 num_mdrs;
u32 mdrs_off;
u32 num_vtd_dmars;
u32 vtd_dmars_off;
} __packed;
struct acpi_table_header *tboot_get_dmar_table(struct acpi_table_header *dmar_tbl)
{
void *heap_base, *heap_ptr, *config;
if (!tboot_enabled())
return dmar_tbl;
/*
* ACPI tables may not be DMA protected by tboot, so use DMAR copy
* SINIT saved in SinitMleData in TXT heap (which is DMA protected)
*/
/* map config space in order to get heap addr */
config = ioremap(TXT_PUB_CONFIG_REGS_BASE, NR_TXT_CONFIG_PAGES *
PAGE_SIZE);
if (!config)
return NULL;
/* now map TXT heap */
heap_base = ioremap(*(u64 *)(config + TXTCR_HEAP_BASE),
*(u64 *)(config + TXTCR_HEAP_SIZE));
iounmap(config);
if (!heap_base)
return NULL;
/* walk heap to SinitMleData */
/* skip BiosData */
heap_ptr = heap_base + *(u64 *)heap_base;
/* skip OsMleData */
heap_ptr += *(u64 *)heap_ptr;
/* skip OsSinitData */
heap_ptr += *(u64 *)heap_ptr;
/* now points to SinitMleDataSize; set to SinitMleData */
heap_ptr += sizeof(u64);
/* get addr of DMAR table */
dmar_tbl = (struct acpi_table_header *)(heap_ptr +
((struct sinit_mle_data *)heap_ptr)->vtd_dmars_off -
sizeof(u64));
/* don't unmap heap because dmar.c needs access to this */
return dmar_tbl;
}
int tboot_force_iommu(void)
{
if (!tboot_enabled())
return 0;
if (no_iommu || swiotlb || dmar_disabled)
pr_warning("Forcing Intel-IOMMU to enabled\n");
dmar_disabled = 0;
#ifdef CONFIG_SWIOTLB
swiotlb = 0;
#endif
no_iommu = 0;
return 1;
}
......@@ -45,6 +45,7 @@
#include <acpi/acpi.h>
#include "accommon.h"
#include "actables.h"
#include <linux/tboot.h>
#define _COMPONENT ACPI_HARDWARE
ACPI_MODULE_NAME("hwsleep")
......@@ -342,6 +343,8 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state)
ACPI_FLUSH_CPU_CACHE();
tboot_sleep(sleep_state, pm1a_control, pm1b_control);
/* Write #2: Write both SLP_TYP + SLP_EN */
status = acpi_hw_write_pm1_control(pm1a_control, pm1b_control);
......
......@@ -33,6 +33,7 @@
#include <linux/timer.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/tboot.h>
#undef PREFIX
#define PREFIX "DMAR:"
......@@ -413,6 +414,12 @@ parse_dmar_table(void)
*/
dmar_table_detect();
/*
* ACPI tables may not be DMA protected by tboot, so use DMAR copy
* SINIT saved in SinitMleData in TXT heap (which is DMA protected)
*/
dmar_tbl = tboot_get_dmar_table(dmar_tbl);
dmar = (struct acpi_table_dmar *)dmar_tbl;
if (!dmar)
return -ENODEV;
......
......@@ -37,6 +37,7 @@
#include <linux/iommu.h>
#include <linux/intel-iommu.h>
#include <linux/sysdev.h>
#include <linux/tboot.h>
#include <asm/cacheflush.h>
#include <asm/iommu.h>
#include "pci.h"
......@@ -3183,12 +3184,22 @@ static int __init init_iommu_sysfs(void)
int __init intel_iommu_init(void)
{
int ret = 0;
int force_on = 0;
if (dmar_table_init())
/* VT-d is required for a TXT/tboot launch, so enforce that */
force_on = tboot_force_iommu();
if (dmar_table_init()) {
if (force_on)
panic("tboot: Failed to initialize DMAR table\n");
return -ENODEV;
}
if (dmar_dev_scope_init())
if (dmar_dev_scope_init()) {
if (force_on)
panic("tboot: Failed to initialize DMAR device scope\n");
return -ENODEV;
}
/*
* Check the need for DMA-remapping initialization now.
......@@ -3204,6 +3215,8 @@ int __init intel_iommu_init(void)
ret = init_dmars();
if (ret) {
if (force_on)
panic("tboot: Failed to initialize DMARs\n");
printk(KERN_ERR "IOMMU: dmar init failed\n");
put_iova_domain(&reserved_iova_list);
iommu_exit_mempool();
......
/*
* tboot.h: shared data structure with tboot and kernel and functions
* used by kernel for runtime support of Intel(R) Trusted
* Execution Technology
*
* Copyright (c) 2006-2009, Intel Corporation
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
*/
#ifndef _LINUX_TBOOT_H
#define _LINUX_TBOOT_H
/* these must have the values from 0-5 in this order */
enum {
TB_SHUTDOWN_REBOOT = 0,
TB_SHUTDOWN_S5,
TB_SHUTDOWN_S4,
TB_SHUTDOWN_S3,
TB_SHUTDOWN_HALT,
TB_SHUTDOWN_WFS
};
#ifdef CONFIG_INTEL_TXT
#include <acpi/acpi.h>
/* used to communicate between tboot and the launched kernel */
#define TB_KEY_SIZE 64 /* 512 bits */
#define MAX_TB_MAC_REGIONS 32
struct tboot_mac_region {
u64 start; /* must be 64 byte -aligned */
u32 size; /* must be 64 byte -granular */
} __packed;
/* GAS - Generic Address Structure (ACPI 2.0+) */
struct tboot_acpi_generic_address {
u8 space_id;
u8 bit_width;
u8 bit_offset;
u8 access_width;
u64 address;
} __packed;
/*
* combines Sx info from FADT and FACS tables per ACPI 2.0+ spec
* (http://www.acpi.info/)
*/
struct tboot_acpi_sleep_info {
struct tboot_acpi_generic_address pm1a_cnt_blk;
struct tboot_acpi_generic_address pm1b_cnt_blk;
struct tboot_acpi_generic_address pm1a_evt_blk;
struct tboot_acpi_generic_address pm1b_evt_blk;
u16 pm1a_cnt_val;
u16 pm1b_cnt_val;
u64 wakeup_vector;
u32 vector_width;
u64 kernel_s3_resume_vector;
} __packed;
/*
* shared memory page used for communication between tboot and kernel
*/
struct tboot {
/*
* version 3+ fields:
*/
/* TBOOT_UUID */
u8 uuid[16];
/* version number: 5 is current */
u32 version;
/* physical addr of tb_log_t log */
u32 log_addr;
/*
* physical addr of entry point for tboot shutdown and
* type of shutdown (TB_SHUTDOWN_*) being requested
*/
u32 shutdown_entry;
u32 shutdown_type;
/* kernel-specified ACPI info for Sx shutdown */
struct tboot_acpi_sleep_info acpi_sinfo;
/* tboot location in memory (physical) */
u32 tboot_base;
u32 tboot_size;
/* memory regions (phys addrs) for tboot to MAC on S3 */
u8 num_mac_regions;
struct tboot_mac_region mac_regions[MAX_TB_MAC_REGIONS];
/*
* version 4+ fields:
*/
/* symmetric key for use by kernel; will be encrypted on S3 */
u8 s3_key[TB_KEY_SIZE];
/*
* version 5+ fields:
*/
/* used to 4byte-align num_in_wfs */
u8 reserved_align[3];
/* number of processors in wait-for-SIPI */
u32 num_in_wfs;
} __packed;
/*
* UUID for tboot data struct to facilitate matching
* defined as {663C8DFF-E8B3-4b82-AABF-19EA4D057A08} by tboot, which is
* represented as {} in the char array used here
*/
#define TBOOT_UUID {0xff, 0x8d, 0x3c, 0x66, 0xb3, 0xe8, 0x82, 0x4b, 0xbf,\
0xaa, 0x19, 0xea, 0x4d, 0x5, 0x7a, 0x8}
extern struct tboot *tboot;
static inline int tboot_enabled(void)
{
return tboot != NULL;
}
extern void tboot_probe(void);
extern void tboot_shutdown(u32 shutdown_type);
extern void tboot_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control);
extern struct acpi_table_header *tboot_get_dmar_table(
struct acpi_table_header *dmar_tbl);
extern int tboot_force_iommu(void);
#else
#define tboot_probe() do { } while (0)
#define tboot_shutdown(shutdown_type) do { } while (0)
#define tboot_sleep(sleep_state, pm1a_control, pm1b_control) \
do { } while (0)
#define tboot_get_dmar_table(dmar_tbl) (dmar_tbl)
#define tboot_force_iommu() 0
#endif /* !CONFIG_INTEL_TXT */
#endif /* _LINUX_TBOOT_H */
......@@ -401,6 +401,7 @@ int disable_nonboot_cpus(void)
break;
}
}
if (!error) {
BUG_ON(num_online_cpus() > 1);
/* Make sure the CPUs won't be enabled by someone else */
......
......@@ -113,6 +113,36 @@ config SECURITY_ROOTPLUG
If you are unsure how to answer this question, answer N.
config INTEL_TXT
bool "Enable Intel(R) Trusted Execution Technology (Intel(R) TXT)"
depends on HAVE_INTEL_TXT
help
This option enables support for booting the kernel with the
Trusted Boot (tboot) module. This will utilize
Intel(R) Trusted Execution Technology to perform a measured launch
of the kernel. If the system does not support Intel(R) TXT, this
will have no effect.
Intel TXT will provide higher assurance of system configuration and
initial state as well as data reset protection. This is used to
create a robust initial kernel measurement and verification, which
helps to ensure that kernel security mechanisms are functioning
correctly. This level of protection requires a root of trust outside
of the kernel itself.
Intel TXT also helps solve real end user concerns about having
confidence that their hardware is running the VMM or kernel that
it was configured with, especially since they may be responsible for
providing such assurances to VMs and services running on it.
See <http://www.intel.com/technology/security/> for more information
about Intel(R) TXT.
See <http://tboot.sourceforge.net> for more information about tboot.
See Documentation/intel_txt.txt for a description of how to enable
Intel TXT support in a kernel boot.
If you are unsure as to whether this is required, answer N.
config LSM_MMAP_MIN_ADDR
int "Low address space for LSM to protect from user allocation"
depends on SECURITY && SECURITY_SELINUX
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册