提交 145e6642 编写于 作者: A Andy Whitcroft 提交者: Linus Torvalds

[PATCH] ppc64: sparsemem memory model

Provide the architecture specific implementation for SPARSEMEM for PPC64
systems.
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> (in part)
Signed-off-by: NMartin Bligh <mbligh@aracnet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 74b30be2
......@@ -198,6 +198,13 @@ config HMT
This option enables hardware multithreading on RS64 cpus.
pSeries systems p620 and p660 have such a cpu type.
config ARCH_SELECT_MEMORY_MODEL
def_bool y
config ARCH_FLATMEM_ENABLE
def_bool y
depends on !NUMA
config ARCH_DISCONTIGMEM_ENABLE
def_bool y
depends on SMP && PPC_PSERIES
......@@ -209,6 +216,10 @@ config ARCH_DISCONTIGMEM_DEFAULT
config ARCH_FLATMEM_ENABLE
def_bool y
config ARCH_SPARSEMEM_ENABLE
def_bool y
depends on ARCH_DISCONTIGMEM_ENABLE
source "mm/Kconfig"
config HAVE_ARCH_EARLY_PFN_TO_NID
......@@ -229,7 +240,7 @@ config NODES_SPAN_OTHER_NODES
config NUMA
bool "NUMA support"
depends on DISCONTIGMEM
default y if DISCONTIGMEM || SPARSEMEM
config SCHED_SMT
bool "SMT (Hyperthreading) scheduler support"
......
......@@ -1055,6 +1055,7 @@ void __init setup_arch(char **cmdline_p)
/* set up the bootmem stuff with available memory */
do_init_bootmem();
sparse_init();
/* initialize the syscall map in systemcfg */
setup_syscall_map();
......
......@@ -6,6 +6,6 @@ EXTRA_CFLAGS += -mno-minimal-toc
obj-y := fault.o init.o imalloc.o hash_utils.o hash_low.o tlb.o \
slb_low.o slb.o stab.o mmap.o
obj-$(CONFIG_DISCONTIGMEM) += numa.o
obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_PPC_MULTIPLATFORM) += hash_native.o
......@@ -531,7 +531,7 @@ EXPORT_SYMBOL(page_is_ram);
* Initialize the bootmem system and give it all the memory we
* have available.
*/
#ifndef CONFIG_DISCONTIGMEM
#ifndef CONFIG_NEED_MULTIPLE_NODES
void __init do_init_bootmem(void)
{
unsigned long i;
......@@ -553,12 +553,20 @@ void __init do_init_bootmem(void)
max_pfn = max_low_pfn;
/* add all physical memory to the bootmem map. Also find the first */
/* Add all physical memory to the bootmem map, mark each area
* present.
*/
for (i=0; i < lmb.memory.cnt; i++) {
unsigned long physbase, size;
unsigned long start_pfn, end_pfn;
physbase = lmb.memory.region[i].physbase;
size = lmb.memory.region[i].size;
start_pfn = physbase >> PAGE_SHIFT;
end_pfn = start_pfn + (size >> PAGE_SHIFT);
memory_present(0, start_pfn, end_pfn);
free_bootmem(physbase, size);
}
......@@ -597,7 +605,7 @@ void __init paging_init(void)
free_area_init_node(0, NODE_DATA(0), zones_size,
__pa(PAGE_OFFSET) >> PAGE_SHIFT, zholes_size);
}
#endif /* CONFIG_DISCONTIGMEM */
#endif /* ! CONFIG_NEED_MULTIPLE_NODES */
static struct kcore_list kcore_vmem;
......@@ -628,7 +636,7 @@ module_init(setup_kcore);
void __init mem_init(void)
{
#ifdef CONFIG_DISCONTIGMEM
#ifdef CONFIG_NEED_MULTIPLE_NODES
int nid;
#endif
pg_data_t *pgdat;
......@@ -639,7 +647,7 @@ void __init mem_init(void)
num_physpages = max_low_pfn; /* RAM is assumed contiguous */
high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
#ifdef CONFIG_DISCONTIGMEM
#ifdef CONFIG_NEED_MULTIPLE_NODES
for_each_online_node(nid) {
if (NODE_DATA(nid)->node_spanned_pages != 0) {
printk("freeing bootmem node %x\n", nid);
......
......@@ -10,9 +10,20 @@
#include <linux/config.h>
#include <asm/smp.h>
#ifdef CONFIG_DISCONTIGMEM
/* generic non-linear memory support:
*
* 1) we will not split memory into more chunks than will fit into the
* flags field of the struct page
*/
#ifdef CONFIG_NEED_MULTIPLE_NODES
extern struct pglist_data *node_data[];
/*
* Return a pointer to the node data for node n.
*/
#define NODE_DATA(nid) (node_data[nid])
/*
* Following are specific to this numa platform.
......@@ -47,30 +58,27 @@ static inline int pa_to_nid(unsigned long pa)
return nid;
}
#define pfn_to_nid(pfn) pa_to_nid((pfn) << PAGE_SHIFT)
/*
* Return a pointer to the node data for node n.
*/
#define NODE_DATA(nid) (node_data[nid])
#define node_localnr(pfn, nid) ((pfn) - NODE_DATA(nid)->node_start_pfn)
/*
* Following are macros that each numa implmentation must define.
*/
/*
* Given a kernel address, find the home node of the underlying memory.
*/
#define kvaddr_to_nid(kaddr) pa_to_nid(__pa(kaddr))
#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn)
#define node_end_pfn(nid) (NODE_DATA(nid)->node_end_pfn)
#define local_mapnr(kvaddr) \
( (__pa(kvaddr) >> PAGE_SHIFT) - node_start_pfn(kvaddr_to_nid(kvaddr))
#ifdef CONFIG_DISCONTIGMEM
/*
* Given a kernel address, find the home node of the underlying memory.
*/
#define kvaddr_to_nid(kaddr) pa_to_nid(__pa(kaddr))
#define pfn_to_nid(pfn) pa_to_nid((unsigned long)(pfn) << PAGE_SHIFT)
/* Written this way to avoid evaluating arguments twice */
#define discontigmem_pfn_to_page(pfn) \
({ \
......@@ -91,6 +99,8 @@ static inline int pa_to_nid(unsigned long pa)
#endif /* CONFIG_DISCONTIGMEM */
#endif /* CONFIG_NEED_MULTIPLE_NODES */
#ifdef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
#define early_pfn_to_nid(pfn) pa_to_nid(((unsigned long)pfn) << PAGE_SHIFT)
#endif
......
......@@ -217,7 +217,8 @@ extern u64 ppc64_pft_size; /* Log 2 of page table size */
#define page_to_pfn(page) discontigmem_page_to_pfn(page)
#define pfn_to_page(pfn) discontigmem_pfn_to_page(pfn)
#define pfn_valid(pfn) discontigmem_pfn_valid(pfn)
#else
#endif
#ifdef CONFIG_FLATMEM
#define pfn_to_page(pfn) (mem_map + (pfn))
#define page_to_pfn(page) ((unsigned long)((page) - mem_map))
#define pfn_valid(pfn) ((pfn) < max_mapnr)
......
#ifndef _ASM_PPC64_SPARSEMEM_H
#define _ASM_PPC64_SPARSEMEM_H 1
#ifdef CONFIG_SPARSEMEM
/*
* SECTION_SIZE_BITS 2^N: how big each section will be
* MAX_PHYSADDR_BITS 2^N: how much physical address space we have
* MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space
*/
#define SECTION_SIZE_BITS 24
#define MAX_PHYSADDR_BITS 38
#define MAX_PHYSMEM_BITS 36
#endif /* CONFIG_SPARSEMEM */
#endif /* _ASM_PPC64_SPARSEMEM_H */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册