提交 0ec446ea 编写于 作者: A Axel Lin 提交者: Mark Brown

regulator: Refactor to use one da9052_ldo_ops/da9052_dcdc_ops for all LDOs/DCDCs

In current implementation, da9052_ldo_ops and da9052_ldo5_6_ops are very
similar, only the set_voltage is slightly different.
da9052_buckperi_ops and da9052_dcdc_ops are also similar.

This patch adds da9052_regulator_set_voltage for the set_voltage callback
used by all LDOs and DCDCs. Rework da9052_get_regulator_voltage_sel and
da9052_set_dcdc_voltage to make it possible to be shared by all DCDCs.
Rework da9052_list_voltage to make it to be shared by all DCDCs and LDOs.

Then we can remove da9052_ldo5_6_ops and da9052_buckperi_ops.
We can also remove DA9052_LDO5_6 and DA9052_BUCKPERI macros which is not used
now.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
上级 9210f05b
......@@ -189,36 +189,23 @@ static int da9052_dcdc_set_current_limit(struct regulator_dev *rdev, int min_uA,
reg_val << 6);
}
static int da9052_list_buckperi_voltage(struct regulator_dev *rdev,
unsigned int selector)
{
struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
struct da9052_regulator_info *info = regulator->info;
int volt_uV;
if ((regulator->da9052->chip_id == DA9052) &&
(selector >= DA9052_BUCK_PERI_REG_MAP_UPTO_3uV)) {
volt_uV = ((DA9052_BUCK_PERI_REG_MAP_UPTO_3uV * info->step_uV)
+ info->min_uV);
volt_uV += (selector - DA9052_BUCK_PERI_REG_MAP_UPTO_3uV)
* (DA9052_BUCK_PERI_3uV_STEP);
} else
volt_uV = (selector * info->step_uV) + info->min_uV;
if (volt_uV > info->max_uV)
return -EINVAL;
return volt_uV;
}
static int da9052_list_voltage(struct regulator_dev *rdev,
unsigned int selector)
{
struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
struct da9052_regulator_info *info = regulator->info;
int id = rdev_get_id(rdev);
int volt_uV;
volt_uV = info->min_uV + info->step_uV * selector;
if ((id == DA9052_ID_BUCK4) && (regulator->da9052->chip_id == DA9052)
&& (selector >= DA9052_BUCK_PERI_REG_MAP_UPTO_3uV)) {
volt_uV = ((DA9052_BUCK_PERI_REG_MAP_UPTO_3uV * info->step_uV)
+ info->min_uV);
volt_uV += (selector - DA9052_BUCK_PERI_REG_MAP_UPTO_3uV)
* (DA9052_BUCK_PERI_3uV_STEP);
} else {
volt_uV = (selector * info->step_uV) + info->min_uV;
}
if (volt_uV > info->max_uV)
return -EINVAL;
......@@ -226,13 +213,13 @@ static int da9052_list_voltage(struct regulator_dev *rdev,
return volt_uV;
}
static int da9052_regulator_set_voltage_int(struct regulator_dev *rdev,
static int da9052_regulator_set_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV,
unsigned int *selector)
{
struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
struct da9052_regulator_info *info = regulator->info;
int offset = rdev_get_id(rdev);
int id = rdev_get_id(rdev);
int ret;
ret = verify_range(info, min_uV, max_uV);
......@@ -242,113 +229,43 @@ static int da9052_regulator_set_voltage_int(struct regulator_dev *rdev,
if (min_uV < info->min_uV)
min_uV = info->min_uV;
*selector = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV);
if ((id == DA9052_ID_BUCK4) && (regulator->da9052->chip_id == DA9052)
&& (min_uV >= DA9052_CONST_3uV)) {
*selector = DA9052_BUCK_PERI_REG_MAP_UPTO_3uV +
DIV_ROUND_UP(min_uV - DA9052_CONST_3uV,
DA9052_BUCK_PERI_3uV_STEP);
} else {
*selector = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV);
}
ret = da9052_list_voltage(rdev, *selector);
if (ret < 0)
return ret;
return da9052_reg_update(regulator->da9052,
DA9052_BUCKCORE_REG + offset,
ret = da9052_reg_update(regulator->da9052,
DA9052_BUCKCORE_REG + id,
(1 << info->volt_shift) - 1, *selector);
}
static int da9052_set_ldo_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV,
unsigned int *selector)
{
return da9052_regulator_set_voltage_int(rdev, min_uV, max_uV, selector);
}
static int da9052_set_ldo5_6_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV,
unsigned int *selector)
{
struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
struct da9052_regulator_info *info = regulator->info;
int ret;
ret = da9052_regulator_set_voltage_int(rdev, min_uV, max_uV, selector);
if (ret < 0)
return ret;
/* Some LDOs are DVC controlled which requires enabling of
* the LDO activate bit to implment the changes on the
* LDO output.
*/
return da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG,
info->activate_bit, info->activate_bit);
}
static int da9052_set_dcdc_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV,
unsigned int *selector)
{
struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
struct da9052_regulator_info *info = regulator->info;
int ret;
ret = da9052_regulator_set_voltage_int(rdev, min_uV, max_uV, selector);
if (ret < 0)
return ret;
/* Some DCDCs are DVC controlled which requires enabling of
* the DCDC activate bit to implment the changes on the
* DCDC output.
*/
return da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG,
info->activate_bit, info->activate_bit);
}
static int da9052_get_regulator_voltage_sel(struct regulator_dev *rdev)
{
struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
struct da9052_regulator_info *info = regulator->info;
int offset = rdev_get_id(rdev);
int ret;
ret = da9052_reg_read(regulator->da9052, DA9052_BUCKCORE_REG + offset);
if (ret < 0)
return ret;
ret &= ((1 << info->volt_shift) - 1);
/* Some LDOs and DCDCs are DVC controlled which requires enabling of
* the activate bit to implment the changes on the output.
*/
switch (id) {
case DA9052_ID_BUCK1:
case DA9052_ID_BUCK2:
case DA9052_ID_BUCK3:
case DA9052_ID_LDO2:
case DA9052_ID_LDO3:
ret = da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG,
info->activate_bit, info->activate_bit);
break;
}
return ret;
}
static int da9052_set_buckperi_voltage(struct regulator_dev *rdev, int min_uV,
int max_uV, unsigned int *selector)
{
struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
struct da9052_regulator_info *info = regulator->info;
int offset = rdev_get_id(rdev);
int ret;
ret = verify_range(info, min_uV, max_uV);
if (ret < 0)
return ret;
if (min_uV < info->min_uV)
min_uV = info->min_uV;
if ((regulator->da9052->chip_id == DA9052) &&
(min_uV >= DA9052_CONST_3uV))
*selector = DA9052_BUCK_PERI_REG_MAP_UPTO_3uV +
DIV_ROUND_UP(min_uV - DA9052_CONST_3uV,
DA9052_BUCK_PERI_3uV_STEP);
else
*selector = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV);
ret = da9052_list_buckperi_voltage(rdev, *selector);
if (ret < 0)
return ret;
return da9052_reg_update(regulator->da9052,
DA9052_BUCKCORE_REG + offset,
(1 << info->volt_shift) - 1, *selector);
}
static int da9052_get_buckperi_voltage_sel(struct regulator_dev *rdev)
static int da9052_get_regulator_voltage_sel(struct regulator_dev *rdev)
{
struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
struct da9052_regulator_info *info = regulator->info;
......@@ -364,21 +281,8 @@ static int da9052_get_buckperi_voltage_sel(struct regulator_dev *rdev)
return ret;
}
static struct regulator_ops da9052_buckperi_ops = {
.list_voltage = da9052_list_buckperi_voltage,
.get_voltage_sel = da9052_get_buckperi_voltage_sel,
.set_voltage = da9052_set_buckperi_voltage,
.get_current_limit = da9052_dcdc_get_current_limit,
.set_current_limit = da9052_dcdc_set_current_limit,
.is_enabled = da9052_regulator_is_enabled,
.enable = da9052_regulator_enable,
.disable = da9052_regulator_disable,
};
static struct regulator_ops da9052_dcdc_ops = {
.set_voltage = da9052_set_dcdc_voltage,
.set_voltage = da9052_regulator_set_voltage,
.get_current_limit = da9052_dcdc_get_current_limit,
.set_current_limit = da9052_dcdc_set_current_limit,
......@@ -389,18 +293,8 @@ static struct regulator_ops da9052_dcdc_ops = {
.disable = da9052_regulator_disable,
};
static struct regulator_ops da9052_ldo5_6_ops = {
.set_voltage = da9052_set_ldo5_6_voltage,
.list_voltage = da9052_list_voltage,
.get_voltage_sel = da9052_get_regulator_voltage_sel,
.is_enabled = da9052_regulator_is_enabled,
.enable = da9052_regulator_enable,
.disable = da9052_regulator_disable,
};
static struct regulator_ops da9052_ldo_ops = {
.set_voltage = da9052_set_ldo_voltage,
.set_voltage = da9052_regulator_set_voltage,
.list_voltage = da9052_list_voltage,
.get_voltage_sel = da9052_get_regulator_voltage_sel,
......@@ -409,24 +303,6 @@ static struct regulator_ops da9052_ldo_ops = {
.disable = da9052_regulator_disable,
};
#define DA9052_LDO5_6(_id, step, min, max, sbits, ebits, abits) \
{\
.reg_desc = {\
.name = #_id,\
.ops = &da9052_ldo5_6_ops,\
.type = REGULATOR_VOLTAGE,\
.id = DA9052_ID_##_id,\
.n_voltages = (max - min) / step + 1, \
.owner = THIS_MODULE,\
},\
.min_uV = (min) * 1000,\
.max_uV = (max) * 1000,\
.step_uV = (step) * 1000,\
.volt_shift = (sbits),\
.en_bit = (ebits),\
.activate_bit = (abits),\
}
#define DA9052_LDO(_id, step, min, max, sbits, ebits, abits) \
{\
.reg_desc = {\
......@@ -463,32 +339,14 @@ static struct regulator_ops da9052_ldo_ops = {
.activate_bit = (abits),\
}
#define DA9052_BUCKPERI(_id, step, min, max, sbits, ebits, abits) \
{\
.reg_desc = {\
.name = #_id,\
.ops = &da9052_buckperi_ops,\
.type = REGULATOR_VOLTAGE,\
.id = DA9052_ID_##_id,\
.n_voltages = (max - min) / step + 1, \
.owner = THIS_MODULE,\
},\
.min_uV = (min) * 1000,\
.max_uV = (max) * 1000,\
.step_uV = (step) * 1000,\
.volt_shift = (sbits),\
.en_bit = (ebits),\
.activate_bit = (abits),\
}
static struct da9052_regulator_info da9052_regulator_info[] = {
DA9052_DCDC(BUCK1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO),
DA9052_DCDC(BUCK2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO),
DA9052_DCDC(BUCK3, 25, 925, 2500, 6, 6, DA9052_SUPPLY_VBMEMGO),
DA9052_BUCKPERI(BUCK4, 50, 1800, 3600, 5, 6, 0),
DA9052_DCDC(BUCK4, 50, 1800, 3600, 5, 6, 0),
DA9052_LDO(LDO1, 50, 600, 1800, 5, 6, 0),
DA9052_LDO5_6(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO),
DA9052_LDO5_6(LDO3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO),
DA9052_LDO(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO),
DA9052_LDO(LDO3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO),
DA9052_LDO(LDO4, 25, 1725, 3300, 6, 6, 0),
DA9052_LDO(LDO5, 50, 1200, 3600, 6, 6, 0),
DA9052_LDO(LDO6, 50, 1200, 3600, 6, 6, 0),
......@@ -502,10 +360,10 @@ static struct da9052_regulator_info da9053_regulator_info[] = {
DA9052_DCDC(BUCK1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO),
DA9052_DCDC(BUCK2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO),
DA9052_DCDC(BUCK3, 25, 925, 2500, 6, 6, DA9052_SUPPLY_VBMEMGO),
DA9052_BUCKPERI(BUCK4, 25, 925, 2500, 6, 6, 0),
DA9052_DCDC(BUCK4, 25, 925, 2500, 6, 6, 0),
DA9052_LDO(LDO1, 50, 600, 1800, 5, 6, 0),
DA9052_LDO5_6(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO),
DA9052_LDO5_6(LDO3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO),
DA9052_LDO(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO),
DA9052_LDO(LDO3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO),
DA9052_LDO(LDO4, 25, 1725, 3300, 6, 6, 0),
DA9052_LDO(LDO5, 50, 1200, 3600, 6, 6, 0),
DA9052_LDO(LDO6, 50, 1200, 3600, 6, 6, 0),
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册