提交 098dee99 编写于 作者: M Magnus Damm 提交者: Paul Mundt

sh: add enable()/disable()/set_rate() to div6 code

This patch updates the div6 clock helper code to add support
for enable(), disable() and set_rate() callbacks.

Needed by the camera clock enabling board code on Migo-R.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
上级 c01641b4
......@@ -119,6 +119,10 @@ long clk_rate_table_round(struct clk *clk,
struct cpufreq_frequency_table *freq_table,
unsigned long rate);
int clk_rate_table_find(struct clk *clk,
struct cpufreq_frequency_table *freq_table,
unsigned long rate);
#define SH_CLK_MSTP32(_name, _id, _parent, _enable_reg, \
_enable_bit, _flags) \
{ \
......
......@@ -68,9 +68,53 @@ static unsigned long sh_clk_div6_recalc(struct clk *clk)
return clk->freq_table[idx].frequency;
}
static int sh_clk_div6_set_rate(struct clk *clk,
unsigned long rate, int algo_id)
{
unsigned long value;
int idx;
idx = clk_rate_table_find(clk, clk->freq_table, rate);
if (idx < 0)
return idx;
value = __raw_readl(clk->enable_reg);
value &= ~0x3f;
value |= idx;
__raw_writel(value, clk->enable_reg);
return 0;
}
static int sh_clk_div6_enable(struct clk *clk)
{
unsigned long value;
int ret;
ret = sh_clk_div6_set_rate(clk, clk->rate, 0);
if (ret == 0) {
value = __raw_readl(clk->enable_reg);
value &= ~0x100; /* clear stop bit to enable clock */
__raw_writel(value, clk->enable_reg);
}
return ret;
}
static void sh_clk_div6_disable(struct clk *clk)
{
unsigned long value;
value = __raw_readl(clk->enable_reg);
value |= 0x100; /* stop clock */
value |= 0x3f; /* VDIV bits must be non-zero, overwrite divider */
__raw_writel(value, clk->enable_reg);
}
static struct clk_ops sh_clk_div6_clk_ops = {
.recalc = sh_clk_div6_recalc,
.round_rate = sh_clk_div_round_rate,
.set_rate = sh_clk_div6_set_rate,
.enable = sh_clk_div6_enable,
.disable = sh_clk_div6_disable,
};
int __init sh_clk_div6_register(struct clk *clks, int nr)
......
......@@ -111,6 +111,25 @@ long clk_rate_table_round(struct clk *clk,
return rate_best_fit;
}
int clk_rate_table_find(struct clk *clk,
struct cpufreq_frequency_table *freq_table,
unsigned long rate)
{
int i;
for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
unsigned long freq = freq_table[i].frequency;
if (freq == CPUFREQ_ENTRY_INVALID)
continue;
if (freq == rate)
return i;
}
return -ENOENT;
}
/* Used for clocks that always have same value as the parent clock */
unsigned long followparent_recalc(struct clk *clk)
{
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册