提交 088f3876 编写于 作者: A Anoop P A 提交者: Ralf Baechle

MIPS: MSP71xx: Add VSMP/SMTC support.

[Ralf: Fixed more checkpatch assertions and inclusion of unnecessary header
<linux/sched.h>.]
Signed-off-by: NAnoop P A <anoop.pa@gmail.com>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2042/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 92592c9c
......@@ -10,3 +10,5 @@ obj-$(CONFIG_IRQ_MSP_CIC) += msp_irq_cic.o msp_irq_per.o
obj-$(CONFIG_PCI) += msp_pci.o
obj-$(CONFIG_MSPETH) += msp_eth.o
obj-$(CONFIG_USB_MSP71XX) += msp_usb.o
obj-$(CONFIG_MIPS_MT_SMP) += msp_smp.o
obj-$(CONFIG_MIPS_MT_SMTC) += msp_smtc.o
......@@ -146,6 +146,8 @@ void __init plat_mem_setup(void)
pm_power_off = msp_power_off;
}
extern struct plat_smp_ops msp_smtc_smp_ops;
void __init prom_init(void)
{
unsigned long family;
......@@ -226,6 +228,14 @@ void __init prom_init(void)
*/
msp_serial_setup();
#ifdef CONFIG_MIPS_MT_SMP
register_smp_ops(&vsmp_smp_ops);
#endif
#ifdef CONFIG_MIPS_MT_SMTC
register_smp_ops(&msp_smtc_smp_ops);
#endif
#ifdef CONFIG_PMCTWILED
/*
* Setup LED states before the subsys_initcall loads other
......
/*
* Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc.
* Copyright (C) 2001 Ralf Baechle
* Copyright (C) 2010 PMC-Sierra, Inc.
*
* VSMP support for MSP platforms . Derived from malta vsmp support.
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
*/
#include <linux/smp.h>
#include <linux/interrupt.h>
#ifdef CONFIG_MIPS_MT_SMP
#define MIPS_CPU_IPI_RESCHED_IRQ 0 /* SW int 0 for resched */
#define MIPS_CPU_IPI_CALL_IRQ 1 /* SW int 1 for call */
static void ipi_resched_dispatch(void)
{
do_IRQ(MIPS_CPU_IPI_RESCHED_IRQ);
}
static void ipi_call_dispatch(void)
{
do_IRQ(MIPS_CPU_IPI_CALL_IRQ);
}
static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
{
return IRQ_HANDLED;
}
static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
{
smp_call_function_interrupt();
return IRQ_HANDLED;
}
static struct irqaction irq_resched = {
.handler = ipi_resched_interrupt,
.flags = IRQF_DISABLED | IRQF_PERCPU,
.name = "IPI_resched"
};
static struct irqaction irq_call = {
.handler = ipi_call_interrupt,
.flags = IRQF_DISABLED | IRQF_PERCPU,
.name = "IPI_call"
};
void __init arch_init_ipiirq(int irq, struct irqaction *action)
{
setup_irq(irq, action);
set_irq_handler(irq, handle_percpu_irq);
}
void __init msp_vsmp_int_init(void)
{
set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
arch_init_ipiirq(MIPS_CPU_IPI_RESCHED_IRQ, &irq_resched);
arch_init_ipiirq(MIPS_CPU_IPI_CALL_IRQ, &irq_call);
}
#endif /* CONFIG_MIPS_MT_SMP */
/*
* MSP71xx Platform-specific hooks for SMP operation
*/
#include <linux/irq.h>
#include <linux/init.h>
#include <asm/mipsmtregs.h>
#include <asm/mipsregs.h>
#include <asm/smtc.h>
#include <asm/smtc_ipi.h>
/* VPE/SMP Prototype implements platform interfaces directly */
/*
* Cause the specified action to be performed on a targeted "CPU"
*/
static void msp_smtc_send_ipi_single(int cpu, unsigned int action)
{
/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
smtc_send_ipi(cpu, LINUX_SMP_IPI, action);
}
static void msp_smtc_send_ipi_mask(const struct cpumask *mask,
unsigned int action)
{
unsigned int i;
for_each_cpu(i, mask)
msp_smtc_send_ipi_single(i, action);
}
/*
* Post-config but pre-boot cleanup entry point
*/
static void __cpuinit msp_smtc_init_secondary(void)
{
int myvpe;
/* Don't enable Malta I/O interrupts (IP2) for secondary VPEs */
myvpe = read_c0_tcbind() & TCBIND_CURVPE;
if (myvpe > 0)
change_c0_status(ST0_IM, STATUSF_IP0 | STATUSF_IP1 |
STATUSF_IP6 | STATUSF_IP7);
smtc_init_secondary();
}
/*
* Platform "CPU" startup hook
*/
static void __cpuinit msp_smtc_boot_secondary(int cpu,
struct task_struct *idle)
{
smtc_boot_secondary(cpu, idle);
}
/*
* SMP initialization finalization entry point
*/
static void __cpuinit msp_smtc_smp_finish(void)
{
smtc_smp_finish();
}
/*
* Hook for after all CPUs are online
*/
static void msp_smtc_cpus_done(void)
{
}
/*
* Platform SMP pre-initialization
*
* As noted above, we can assume a single CPU for now
* but it may be multithreaded.
*/
static void __init msp_smtc_smp_setup(void)
{
/*
* we won't get the definitive value until
* we've run smtc_prepare_cpus later, but
*/
if (read_c0_config3() & (1 << 2))
smp_num_siblings = smtc_build_cpu_map(0);
}
static void __init msp_smtc_prepare_cpus(unsigned int max_cpus)
{
smtc_prepare_cpus(max_cpus);
}
struct plat_smp_ops msp_smtc_smp_ops = {
.send_ipi_single = msp_smtc_send_ipi_single,
.send_ipi_mask = msp_smtc_send_ipi_mask,
.init_secondary = msp_smtc_init_secondary,
.smp_finish = msp_smtc_smp_finish,
.cpus_done = msp_smtc_cpus_done,
.boot_secondary = msp_smtc_boot_secondary,
.smp_setup = msp_smtc_smp_setup,
.prepare_cpus = msp_smtc_prepare_cpus,
};
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册