提交 05e34754 编写于 作者: R Russell King

Merge branch 'p2v' into devel

Conflicts:
	arch/arm/kernel/module.c
	arch/arm/mach-s5pv210/sleep.S
......@@ -190,6 +190,22 @@ config VECTORS_BASE
help
The base address of exception vectors.
config ARM_PATCH_PHYS_VIRT
bool "Patch physical to virtual translations at runtime (EXPERIMENTAL)"
depends on EXPERIMENTAL
depends on !XIP_KERNEL && MMU
depends on !ARCH_REALVIEW || !SPARSEMEM
help
Patch phys-to-virt translation functions at runtime according to
the position of the kernel in system memory.
This can only be used with non-XIP with MMU kernels where
the base of physical memory is at a 16MB boundary.
config ARM_PATCH_PHYS_VIRT_16BIT
def_bool y
depends on ARM_PATCH_PHYS_VIRT && ARCH_MSM
source "init/Kconfig"
source "kernel/Kconfig.freezer"
......
......@@ -15,6 +15,7 @@
#include <linux/compiler.h>
#include <linux/const.h>
#include <linux/types.h>
#include <mach/memory.h>
#include <asm/sizes.h>
......@@ -132,21 +133,11 @@
#define DTCM_OFFSET UL(0xfffe8000)
#endif
/*
* Physical vs virtual RAM address space conversion. These are
* private definitions which should NOT be used outside memory.h
* files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
*/
#ifndef __virt_to_phys
#define __virt_to_phys(x) ((x) - PAGE_OFFSET + PHYS_OFFSET)
#define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET)
#endif
/*
* Convert a physical address to a Page Frame Number and back
*/
#define __phys_to_pfn(paddr) ((paddr) >> PAGE_SHIFT)
#define __pfn_to_phys(pfn) ((pfn) << PAGE_SHIFT)
#define __phys_to_pfn(paddr) ((unsigned long)((paddr) >> PAGE_SHIFT))
#define __pfn_to_phys(pfn) ((phys_addr_t)(pfn) << PAGE_SHIFT)
/*
* Convert a page to/from a physical address
......@@ -156,6 +147,62 @@
#ifndef __ASSEMBLY__
/*
* Physical vs virtual RAM address space conversion. These are
* private definitions which should NOT be used outside memory.h
* files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
*/
#ifndef __virt_to_phys
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
/*
* Constants used to force the right instruction encodings and shifts
* so that all we need to do is modify the 8-bit constant field.
*/
#define __PV_BITS_31_24 0x81000000
#define __PV_BITS_23_16 0x00810000
extern unsigned long __pv_phys_offset;
#define PHYS_OFFSET __pv_phys_offset
#define __pv_stub(from,to,instr,type) \
__asm__("@ __pv_stub\n" \
"1: " instr " %0, %1, %2\n" \
" .pushsection .pv_table,\"a\"\n" \
" .long 1b\n" \
" .popsection\n" \
: "=r" (to) \
: "r" (from), "I" (type))
static inline unsigned long __virt_to_phys(unsigned long x)
{
unsigned long t;
__pv_stub(x, t, "add", __PV_BITS_31_24);
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
__pv_stub(t, t, "add", __PV_BITS_23_16);
#endif
return t;
}
static inline unsigned long __phys_to_virt(unsigned long x)
{
unsigned long t;
__pv_stub(x, t, "sub", __PV_BITS_31_24);
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
__pv_stub(t, t, "sub", __PV_BITS_23_16);
#endif
return t;
}
#else
#define __virt_to_phys(x) ((x) - PAGE_OFFSET + PHYS_OFFSET)
#define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET)
#endif
#endif
#ifndef PHYS_OFFSET
#define PHYS_OFFSET PLAT_PHYS_OFFSET
#endif
/*
* The DMA mask corresponding to the maximum bus address allocatable
* using GFP_DMA. The default here places no restriction on DMA
......@@ -188,12 +235,12 @@
* translation for translating DMA addresses. Use the driver
* DMA support - see dma-mapping.h.
*/
static inline unsigned long virt_to_phys(const volatile void *x)
static inline phys_addr_t virt_to_phys(const volatile void *x)
{
return __virt_to_phys((unsigned long)(x));
}
static inline void *phys_to_virt(unsigned long x)
static inline void *phys_to_virt(phys_addr_t x)
{
return (void *)(__phys_to_virt((unsigned long)(x)));
}
......
......@@ -25,8 +25,31 @@ struct mod_arch_specific {
};
/*
* Include the ARM architecture version.
* Add the ARM architecture version to the version magic string
*/
#define MODULE_ARCH_VERMAGIC "ARMv" __stringify(__LINUX_ARM_ARCH__) " "
#define MODULE_ARCH_VERMAGIC_ARMVSN "ARMv" __stringify(__LINUX_ARM_ARCH__) " "
/* Add __virt_to_phys patching state as well */
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
#define MODULE_ARCH_VERMAGIC_P2V "p2v16 "
#else
#define MODULE_ARCH_VERMAGIC_P2V "p2v8 "
#endif
#else
#define MODULE_ARCH_VERMAGIC_P2V ""
#endif
/* Add instruction set architecture tag to distinguish ARM/Thumb kernels */
#ifdef CONFIG_THUMB2_KERNEL
#define MODULE_ARCH_VERMAGIC_ARMTHUMB "thumb2 "
#else
#define MODULE_ARCH_VERMAGIC_ARMTHUMB ""
#endif
#define MODULE_ARCH_VERMAGIC \
MODULE_ARCH_VERMAGIC_ARMVSN \
MODULE_ARCH_VERMAGIC_ARMTHUMB \
MODULE_ARCH_VERMAGIC_P2V
#endif /* _ASM_ARM_MODULE_H */
......@@ -164,3 +164,7 @@ EXPORT_SYMBOL(mcount);
#endif
EXPORT_SYMBOL(__gnu_mcount_nc);
#endif
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
EXPORT_SYMBOL(__pv_phys_offset);
#endif
......@@ -26,14 +26,6 @@
#include <mach/debug-macro.S>
#endif
#if (PHYS_OFFSET & 0x001fffff)
#error "PHYS_OFFSET must be at an even 2MiB boundary!"
#endif
#define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET)
#define KERNEL_RAM_PADDR (PHYS_OFFSET + TEXT_OFFSET)
/*
* swapper_pg_dir is the virtual address of the initial page table.
* We place the page tables 16K below KERNEL_RAM_VADDR. Therefore, we must
......@@ -41,6 +33,7 @@
* the least significant 16 bits to be 0x8000, but we could probably
* relax this restriction to KERNEL_RAM_VADDR >= PAGE_OFFSET + 0x4000.
*/
#define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET)
#if (KERNEL_RAM_VADDR & 0xffff) != 0x8000
#error KERNEL_RAM_VADDR must start at 0xXXXX8000
#endif
......@@ -48,8 +41,8 @@
.globl swapper_pg_dir
.equ swapper_pg_dir, KERNEL_RAM_VADDR - 0x4000
.macro pgtbl, rd
ldr \rd, =(KERNEL_RAM_PADDR - 0x4000)
.macro pgtbl, rd, phys
add \rd, \phys, #TEXT_OFFSET - 0x4000
.endm
#ifdef CONFIG_XIP_KERNEL
......@@ -88,13 +81,25 @@ ENTRY(stext)
THUMB( it eq ) @ force fixup-able long branch encoding
beq __error_p @ yes, error 'p'
#ifndef CONFIG_XIP_KERNEL
adr r3, 2f
ldmia r3, {r4, r8}
sub r4, r3, r4 @ (PHYS_OFFSET - PAGE_OFFSET)
add r8, r8, r4 @ PHYS_OFFSET
#else
ldr r8, =PLAT_PHYS_OFFSET
#endif
/*
* r1 = machine no, r2 = atags,
* r9 = cpuid, r10 = procinfo
* r8 = phys_offset, r9 = cpuid, r10 = procinfo
*/
bl __vet_atags
#ifdef CONFIG_SMP_ON_UP
bl __fixup_smp
#endif
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
bl __fixup_pv_table
#endif
bl __create_page_tables
......@@ -114,21 +119,24 @@ ENTRY(stext)
1: b __enable_mmu
ENDPROC(stext)
.ltorg
#ifndef CONFIG_XIP_KERNEL
2: .long .
.long PAGE_OFFSET
#endif
/*
* Setup the initial page tables. We only setup the barest
* amount which are required to get the kernel running, which
* generally means mapping in the kernel code.
*
* r9 = cpuid
* r10 = procinfo
* r8 = phys_offset, r9 = cpuid, r10 = procinfo
*
* Returns:
* r0, r3, r5-r7 corrupted
* r4 = physical page table address
*/
__create_page_tables:
pgtbl r4 @ page table address
pgtbl r4, r8 @ page table address
/*
* Clear the 16K level 1 swapper page table
......@@ -184,10 +192,8 @@ __create_page_tables:
/*
* Map some ram to cover our .data and .bss areas.
*/
orr r3, r7, #(KERNEL_RAM_PADDR & 0xff000000)
.if (KERNEL_RAM_PADDR & 0x00f00000)
orr r3, r3, #(KERNEL_RAM_PADDR & 0x00f00000)
.endif
add r3, r8, #TEXT_OFFSET
orr r3, r3, r7
add r0, r4, #(KERNEL_RAM_VADDR & 0xff000000) >> 18
str r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> 18]!
ldr r6, =(_end - 1)
......@@ -200,14 +206,17 @@ __create_page_tables:
#endif
/*
* Then map first 1MB of ram in case it contains our boot params.
* Then map boot params address in r2 or
* the first 1MB of ram if boot params address is not specified.
*/
add r0, r4, #PAGE_OFFSET >> 18
orr r6, r7, #(PHYS_OFFSET & 0xff000000)
.if (PHYS_OFFSET & 0x00f00000)
orr r6, r6, #(PHYS_OFFSET & 0x00f00000)
.endif
str r6, [r0]
mov r0, r2, lsr #20
movs r0, r0, lsl #20
moveq r0, r8
sub r3, r0, r8
add r3, r3, #PAGE_OFFSET
add r3, r4, r3, lsr #18
orr r6, r7, r0
str r6, [r3]
#ifdef CONFIG_DEBUG_LL
#ifndef CONFIG_DEBUG_ICEDCC
......@@ -452,4 +461,129 @@ ENTRY(fixup_smp)
ldmfd sp!, {r4 - r6, pc}
ENDPROC(fixup_smp)
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
/* __fixup_pv_table - patch the stub instructions with the delta between
* PHYS_OFFSET and PAGE_OFFSET, which is assumed to be 16MiB aligned and
* can be expressed by an immediate shifter operand. The stub instruction
* has a form of '(add|sub) rd, rn, #imm'.
*/
__HEAD
__fixup_pv_table:
adr r0, 1f
ldmia r0, {r3-r5, r7}
sub r3, r0, r3 @ PHYS_OFFSET - PAGE_OFFSET
add r4, r4, r3 @ adjust table start address
add r5, r5, r3 @ adjust table end address
add r7, r7, r3 @ adjust __pv_phys_offset address
str r8, [r7] @ save computed PHYS_OFFSET to __pv_phys_offset
#ifndef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
mov r6, r3, lsr #24 @ constant for add/sub instructions
teq r3, r6, lsl #24 @ must be 16MiB aligned
#else
mov r6, r3, lsr #16 @ constant for add/sub instructions
teq r3, r6, lsl #16 @ must be 64kiB aligned
#endif
THUMB( it ne @ cross section branch )
bne __error
str r6, [r7, #4] @ save to __pv_offset
b __fixup_a_pv_table
ENDPROC(__fixup_pv_table)
.align
1: .long .
.long __pv_table_begin
.long __pv_table_end
2: .long __pv_phys_offset
.text
__fixup_a_pv_table:
#ifdef CONFIG_THUMB2_KERNEL
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
lsls r0, r6, #24
lsr r6, #8
beq 1f
clz r7, r0
lsr r0, #24
lsl r0, r7
bic r0, 0x0080
lsrs r7, #1
orrcs r0, #0x0080
orr r0, r0, r7, lsl #12
#endif
1: lsls r6, #24
beq 4f
clz r7, r6
lsr r6, #24
lsl r6, r7
bic r6, #0x0080
lsrs r7, #1
orrcs r6, #0x0080
orr r6, r6, r7, lsl #12
orr r6, #0x4000
b 4f
2: @ at this point the C flag is always clear
add r7, r3
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
ldrh ip, [r7]
tst ip, 0x0400 @ the i bit tells us LS or MS byte
beq 3f
cmp r0, #0 @ set C flag, and ...
biceq ip, 0x0400 @ immediate zero value has a special encoding
streqh ip, [r7] @ that requires the i bit cleared
#endif
3: ldrh ip, [r7, #2]
and ip, 0x8f00
orrcc ip, r6 @ mask in offset bits 31-24
orrcs ip, r0 @ mask in offset bits 23-16
strh ip, [r7, #2]
4: cmp r4, r5
ldrcc r7, [r4], #4 @ use branch for delay slot
bcc 2b
bx lr
#else
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
and r0, r6, #255 @ offset bits 23-16
mov r6, r6, lsr #8 @ offset bits 31-24
#else
mov r0, #0 @ just in case...
#endif
b 3f
2: ldr ip, [r7, r3]
bic ip, ip, #0x000000ff
tst ip, #0x400 @ rotate shift tells us LS or MS byte
orrne ip, ip, r6 @ mask in offset bits 31-24
orreq ip, ip, r0 @ mask in offset bits 23-16
str ip, [r7, r3]
3: cmp r4, r5
ldrcc r7, [r4], #4 @ use branch for delay slot
bcc 2b
mov pc, lr
#endif
ENDPROC(__fixup_a_pv_table)
ENTRY(fixup_pv_table)
stmfd sp!, {r4 - r7, lr}
ldr r2, 2f @ get address of __pv_phys_offset
mov r3, #0 @ no offset
mov r4, r0 @ r0 = table start
add r5, r0, r1 @ r1 = table size
ldr r6, [r2, #4] @ get __pv_offset
bl __fixup_a_pv_table
ldmfd sp!, {r4 - r7, pc}
ENDPROC(fixup_pv_table)
.align
2: .long __pv_phys_offset
.data
.globl __pv_phys_offset
.type __pv_phys_offset, %object
__pv_phys_offset:
.long 0
.size __pv_phys_offset, . - __pv_phys_offset
__pv_offset:
.long 0
#endif
#include "head-common.S"
......@@ -283,12 +283,13 @@ static const Elf_Shdr *find_mod_section(const Elf32_Ehdr *hdr,
return NULL;
}
extern void fixup_pv_table(const void *, unsigned long);
extern void fixup_smp(const void *, unsigned long);
int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
struct module *mod)
{
const Elf_Shdr * __maybe_unused s = NULL;
const Elf_Shdr *s = NULL;
#ifdef CONFIG_ARM_UNWIND
const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
const Elf_Shdr *sechdrs_end = sechdrs + hdr->e_shnum;
......@@ -332,6 +333,11 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
maps[i].unw_sec->sh_size,
maps[i].txt_sec->sh_addr,
maps[i].txt_sec->sh_size);
#endif
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
s = find_mod_section(hdr, sechdrs, ".pv_table");
if (s)
fixup_pv_table((void *)s->sh_addr, s->sh_size);
#endif
s = find_mod_section(hdr, sechdrs, ".alt.smp.init");
if (s && !is_smp())
......
......@@ -325,28 +325,6 @@ static void __init early_print(const char *str, ...)
printk("%s", buf);
}
static struct machine_desc * __init lookup_machine_type(unsigned int type)
{
extern struct machine_desc __arch_info_begin[], __arch_info_end[];
struct machine_desc *p;
for (p = __arch_info_begin; p < __arch_info_end; p++)
if (type == p->nr)
return p;
early_print("\n"
"Error: unrecognized/unsupported machine ID (r1 = 0x%08x).\n\n"
"Available machine support:\n\nID (hex)\tNAME\n", type);
for (p = __arch_info_begin; p < __arch_info_end; p++)
early_print("%08x\t%s\n", p->nr, p->name);
early_print("\nPlease check your kernel config and/or bootloader.\n");
while (true)
/* can't use cpu_relax() here as it may require MMU setup */;
}
static void __init feat_v6_fixup(void)
{
int id = read_cpuid_id();
......@@ -463,21 +441,29 @@ void cpu_init(void)
static struct machine_desc * __init setup_machine(unsigned int nr)
{
struct machine_desc *list;
extern struct machine_desc __arch_info_begin[], __arch_info_end[];
struct machine_desc *p;
/*
* locate machine in the list of supported machines.
*/
list = lookup_machine_type(nr);
if (!list) {
printk("Machine configuration botched (nr %d), unable "
"to continue.\n", nr);
while (1);
}
for (p = __arch_info_begin; p < __arch_info_end; p++)
if (nr == p->nr) {
printk("Machine: %s\n", p->name);
return p;
}
printk("Machine: %s\n", list->name);
early_print("\n"
"Error: unrecognized/unsupported machine ID (r1 = 0x%08x).\n\n"
"Available machine support:\n\nID (hex)\tNAME\n", nr);
return list;
for (p = __arch_info_begin; p < __arch_info_end; p++)
early_print("%08x\t%s\n", p->nr, p->name);
early_print("\nPlease check your kernel config and/or bootloader.\n");
while (true)
/* can't use cpu_relax() here as it may require MMU setup */;
}
static int __init arm_add_memory(unsigned long start, unsigned long size)
......@@ -740,7 +726,7 @@ static struct init_tags {
{ tag_size(tag_core), ATAG_CORE },
{ 1, PAGE_SIZE, 0xff },
{ tag_size(tag_mem32), ATAG_MEM },
{ MEM_SIZE, PHYS_OFFSET },
{ MEM_SIZE },
{ 0, ATAG_NONE }
};
......@@ -839,6 +825,8 @@ void __init setup_arch(char **cmdline_p)
struct machine_desc *mdesc;
char *from = default_command_line;
init_tags.mem.start = PHYS_OFFSET;
unwind_init();
setup_processor();
......@@ -851,8 +839,25 @@ void __init setup_arch(char **cmdline_p)
if (__atags_pointer)
tags = phys_to_virt(__atags_pointer);
else if (mdesc->boot_params)
tags = phys_to_virt(mdesc->boot_params);
else if (mdesc->boot_params) {
#ifdef CONFIG_MMU
/*
* We still are executing with a minimal MMU mapping created
* with the presumption that the machine default for this
* is located in the first MB of RAM. Anything else will
* fault and silently hang the kernel at this point.
*/
if (mdesc->boot_params < PHYS_OFFSET ||
mdesc->boot_params >= PHYS_OFFSET + SZ_1M) {
printk(KERN_WARNING
"Default boot params at physical 0x%08lx out of reach\n",
mdesc->boot_params);
} else
#endif
{
tags = phys_to_virt(mdesc->boot_params);
}
}
#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
/*
......
......@@ -15,7 +15,7 @@
#include <linux/string.h> /* memcpy */
#include <asm/cputype.h>
#include <asm/mach/map.h>
#include <mach/memory.h>
#include <asm/memory.h>
#include "tcm.h"
static struct gen_pool *tcm_pool;
......
......@@ -64,6 +64,10 @@ SECTIONS
__smpalt_end = .;
#endif
__pv_table_begin = .;
*(.pv_table)
__pv_table_end = .;
INIT_SETUP(16)
INIT_CALLS
......
......@@ -12,6 +12,6 @@
#define __ASM_ARCH_MEMORY_H
#define PHYS_OFFSET UL(0xf0000000)
#define PLAT_PHYS_OFFSET UL(0xf0000000)
#endif /* __ASM_ARCH_MEMORY_H */
......@@ -23,6 +23,6 @@
#include <mach/hardware.h>
#define PHYS_OFFSET (AT91_SDRAM_BASE)
#define PLAT_PHYS_OFFSET (AT91_SDRAM_BASE)
#endif
......@@ -31,7 +31,7 @@
* *_SIZE is the size of the region
* *_BASE is the virtual address
*/
#define RAM_START PHYS_OFFSET
#define RAM_START PLAT_PHYS_OFFSET
#define RAM_SIZE (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED)
#define RAM_BASE PAGE_OFFSET
......
......@@ -23,7 +23,7 @@
* files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
*/
#define PHYS_OFFSET CFG_GLOBAL_RAM_BASE
#define PLAT_PHYS_OFFSET CFG_GLOBAL_RAM_BASE
/*
* Maximum DMA memory allowed is 14M
......
......@@ -23,7 +23,7 @@
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0xc0000000)
#define PLAT_PHYS_OFFSET UL(0xc0000000)
#if !defined(CONFIG_ARCH_CDB89712) && !defined (CONFIG_ARCH_AUTCPU12)
......
......@@ -13,7 +13,7 @@
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0x00000000)
#define PLAT_PHYS_OFFSET UL(0x00000000)
#define __phys_to_bus(x) ((x) + PHYS_OFFSET)
#define __bus_to_phys(x) ((x) - PHYS_OFFSET)
......
......@@ -26,9 +26,9 @@
#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx)
#error Cannot enable DaVinci and DA8XX platforms concurrently
#elif defined(CONFIG_ARCH_DAVINCI_DA8XX)
#define PHYS_OFFSET DA8XX_DDR_BASE
#define PLAT_PHYS_OFFSET DA8XX_DDR_BASE
#else
#define PHYS_OFFSET DAVINCI_DDR_BASE
#define PLAT_PHYS_OFFSET DAVINCI_DDR_BASE
#endif
#define DDR2_SDRCR_OFFSET 0xc
......
......@@ -5,6 +5,6 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PHYS_OFFSET UL(0x00000000)
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
......@@ -19,7 +19,7 @@
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0x00000000)
#define PLAT_PHYS_OFFSET UL(0x00000000)
/*
* Cache flushing area - SRAM
......
......@@ -6,15 +6,15 @@
#define __ASM_ARCH_MEMORY_H
#if defined(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)
#define PHYS_OFFSET UL(0x00000000)
#define PLAT_PHYS_OFFSET UL(0x00000000)
#elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)
#define PHYS_OFFSET UL(0xc0000000)
#define PLAT_PHYS_OFFSET UL(0xc0000000)
#elif defined(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)
#define PHYS_OFFSET UL(0xd0000000)
#define PLAT_PHYS_OFFSET UL(0xd0000000)
#elif defined(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)
#define PHYS_OFFSET UL(0xe0000000)
#define PLAT_PHYS_OFFSET UL(0xe0000000)
#elif defined(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)
#define PHYS_OFFSET UL(0xf0000000)
#define PLAT_PHYS_OFFSET UL(0xf0000000)
#else
#error "Kconfig bug: No EP93xx PHYS_OFFSET set"
#endif
......
......@@ -62,7 +62,7 @@ extern unsigned long __bus_to_pfn(unsigned long);
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0x00000000)
#define PLAT_PHYS_OFFSET UL(0x00000000)
#define FLUSH_BASE_PHYS 0x50000000
......
......@@ -11,9 +11,9 @@
#define __MACH_MEMORY_H
#ifdef CONFIG_GEMINI_MEM_SWAP
# define PHYS_OFFSET UL(0x00000000)
# define PLAT_PHYS_OFFSET UL(0x00000000)
#else
# define PHYS_OFFSET UL(0x10000000)
# define PLAT_PHYS_OFFSET UL(0x10000000)
#endif
#endif /* __MACH_MEMORY_H */
......@@ -7,7 +7,7 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PHYS_OFFSET UL(0x40000000)
#define PLAT_PHYS_OFFSET UL(0x40000000)
/*
* This is the maximum DMA address that can be DMAd to.
* There should not be more than (0xd0000000 - 0xc0000000)
......
......@@ -23,7 +23,7 @@
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0x00000000)
#define PLAT_PHYS_OFFSET UL(0x00000000)
#define BUS_OFFSET UL(0x80000000)
#define __virt_to_bus(x) ((x) - PAGE_OFFSET + BUS_OFFSET)
......
......@@ -6,7 +6,7 @@
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0x00000000)
#define PLAT_PHYS_OFFSET UL(0x00000000)
#ifndef __ASSEMBLY__
......
......@@ -8,6 +8,6 @@
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0xa0000000)
#define PLAT_PHYS_OFFSET UL(0xa0000000)
#endif
......@@ -8,6 +8,6 @@
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0x00000000)
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
......@@ -13,7 +13,7 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PHYS_OFFSET UL(0x00000000)
#define PLAT_PHYS_OFFSET UL(0x00000000)
#include <mach/ixp2000-regs.h>
......
......@@ -17,7 +17,7 @@
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET (0x00000000)
#define PLAT_PHYS_OFFSET (0x00000000)
#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)
......
......@@ -12,7 +12,7 @@
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0x00000000)
#define PLAT_PHYS_OFFSET UL(0x00000000)
#if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
......
......@@ -5,6 +5,6 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PHYS_OFFSET UL(0x00000000)
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
......@@ -18,7 +18,7 @@
/*
* Physical SRAM offset.
*/
#define PHYS_OFFSET KS8695_SDRAM_PA
#define PLAT_PHYS_OFFSET KS8695_SDRAM_PA
#ifndef __ASSEMBLY__
......
......@@ -17,7 +17,7 @@
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0xc0000000)
#define PLAT_PHYS_OFFSET UL(0xc0000000)
/*
* Sparsemem version of the above
......
......@@ -5,6 +5,6 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PHYS_OFFSET UL(0x00000000)
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
......@@ -22,6 +22,6 @@
/*
* Physical DRAM offset of bank 0
*/
#define PHYS_OFFSET UL(0x80000000)
#define PLAT_PHYS_OFFSET UL(0x80000000)
#endif
......@@ -9,6 +9,6 @@
#ifndef __ASM_MACH_MEMORY_H
#define __ASM_MACH_MEMORY_H
#define PHYS_OFFSET UL(0x00000000)
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif /* __ASM_MACH_MEMORY_H */
......@@ -132,7 +132,7 @@ static void __init msm7x2x_map_io(void)
MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
#ifdef CONFIG_MSM_DEBUG_UART
#endif
.boot_params = PHYS_OFFSET + 0x100,
.boot_params = PLAT_PHYS_OFFSET + 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
......@@ -142,7 +142,7 @@ MACHINE_END
MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
#ifdef CONFIG_MSM_DEBUG_UART
#endif
.boot_params = PHYS_OFFSET + 0x100,
.boot_params = PLAT_PHYS_OFFSET + 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
......@@ -152,7 +152,7 @@ MACHINE_END
MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
#ifdef CONFIG_MSM_DEBUG_UART
#endif
.boot_params = PHYS_OFFSET + 0x100,
.boot_params = PLAT_PHYS_OFFSET + 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
......@@ -162,7 +162,7 @@ MACHINE_END
MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")
#ifdef CONFIG_MSM_DEBUG_UART
#endif
.boot_params = PHYS_OFFSET + 0x100,
.boot_params = PLAT_PHYS_OFFSET + 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
......
......@@ -26,11 +26,11 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/memory.h>
#include <asm/setup.h>
#include <mach/gpio.h>
#include <mach/board.h>
#include <mach/memory.h>
#include <mach/msm_iomap.h>
#include <mach/dma.h>
......@@ -85,7 +85,7 @@ static void __init msm7x30_map_io(void)
MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
#ifdef CONFIG_MSM_DEBUG_UART
#endif
.boot_params = PHYS_OFFSET + 0x100,
.boot_params = PLAT_PHYS_OFFSET + 0x100,
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
......@@ -95,7 +95,7 @@ MACHINE_END
MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
#ifdef CONFIG_MSM_DEBUG_UART
#endif
.boot_params = PHYS_OFFSET + 0x100,
.boot_params = PLAT_PHYS_OFFSET + 0x100,
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
......@@ -105,7 +105,7 @@ MACHINE_END
MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
#ifdef CONFIG_MSM_DEBUG_UART
#endif
.boot_params = PHYS_OFFSET + 0x100,
.boot_params = PLAT_PHYS_OFFSET + 0x100,
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
......
......@@ -118,7 +118,7 @@ static void __init qsd8x50_init(void)
MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
#ifdef CONFIG_MSM_DEBUG_UART
#endif
.boot_params = PHYS_OFFSET + 0x100,
.boot_params = PLAT_PHYS_OFFSET + 0x100,
.map_io = qsd8x50_map_io,
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
......@@ -128,7 +128,7 @@ MACHINE_END
MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
#ifdef CONFIG_MSM_DEBUG_UART
#endif
.boot_params = PHYS_OFFSET + 0x100,
.boot_params = PLAT_PHYS_OFFSET + 0x100,
.map_io = qsd8x50_map_io,
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
......
......@@ -107,7 +107,7 @@ MACHINE_START(SAPPHIRE, "sapphire")
/* Maintainer: Brian Swetland <swetland@google.com> */
#ifdef CONFIG_MSM_DEBUG_UART
#endif
.boot_params = PHYS_OFFSET + 0x100,
.boot_params = PLAT_PHYS_OFFSET + 0x100,
.fixup = sapphire_fixup,
.map_io = sapphire_map_io,
.init_irq = sapphire_init_irq,
......
......@@ -18,15 +18,15 @@
/* physical offset of RAM */
#if defined(CONFIG_ARCH_QSD8X50) && defined(CONFIG_MSM_SOC_REV_A)
#define PHYS_OFFSET UL(0x00000000)
#define PLAT_PHYS_OFFSET UL(0x00000000)
#elif defined(CONFIG_ARCH_QSD8X50)
#define PHYS_OFFSET UL(0x20000000)
#define PLAT_PHYS_OFFSET UL(0x20000000)
#elif defined(CONFIG_ARCH_MSM7X30)
#define PHYS_OFFSET UL(0x00200000)
#define PLAT_PHYS_OFFSET UL(0x00200000)
#elif defined(CONFIG_ARCH_MSM8X60)
#define PHYS_OFFSET UL(0x40200000)
#define PLAT_PHYS_OFFSET UL(0x40200000)
#else
#define PHYS_OFFSET UL(0x10000000)
#define PLAT_PHYS_OFFSET UL(0x10000000)
#endif
#endif
......
......@@ -5,6 +5,6 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PHYS_OFFSET UL(0x00000000)
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
......@@ -27,6 +27,7 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/memory.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
......@@ -36,7 +37,6 @@
#include <mach/clock.h>
#include <mach/common.h>
#include <mach/iomux-mx3.h>
#include <mach/memory.h>
#include "devices-imx31.h"
#include "devices.h"
......
......@@ -20,7 +20,7 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PHYS_OFFSET UL(0x80000000)
#define PLAT_PHYS_OFFSET UL(0x80000000)
#endif
......@@ -23,6 +23,6 @@
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0x00000000)
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
......@@ -19,6 +19,6 @@
#define NS9XXX_CS2STAT_LENGTH UL(0x1000)
#define NS9XXX_CS3STAT_LENGTH UL(0x1000)
#define PHYS_OFFSET UL(0x00000000)
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
......@@ -16,6 +16,6 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PHYS_OFFSET UL(0x00000000)
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
......@@ -17,6 +17,9 @@
#include <plat/serial.h>
#define omap_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
#define omap_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
.pushsection .data
omap_uart_phys: .word 0x0
omap_uart_virt: .word 0x0
......@@ -33,7 +36,7 @@ omap_uart_virt: .word 0x0
/* Use omap_uart_phys/virt if already configured */
9: mrc p15, 0, \rp, c1, c0
tst \rp, #1 @ MMU enabled?
ldreq \rp, =__virt_to_phys(omap_uart_phys) @ MMU not enabled
ldreq \rp, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
ldrne \rp, =omap_uart_phys @ MMU enabled
add \rv, \rp, #4 @ omap_uart_virt
ldr \rp, [\rp, #0]
......@@ -46,7 +49,7 @@ omap_uart_virt: .word 0x0
mrc p15, 0, \rp, c1, c0
tst \rp, #1 @ MMU enabled?
ldreq \rp, =OMAP_UART_INFO @ MMU not enabled
ldrne \rp, =__phys_to_virt(OMAP_UART_INFO) @ MMU enabled
ldrne \rp, =omap_uart_p2v(OMAP_UART_INFO) @ MMU enabled
ldr \rp, [\rp, #0]
/* Select the UART to use based on the UART1 scratchpad value */
......@@ -73,7 +76,7 @@ omap_uart_virt: .word 0x0
98: add \rp, \rp, #0xff000000 @ phys base
mrc p15, 0, \rv, c1, c0
tst \rv, #1 @ MMU enabled?
ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled
ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
ldrne \rv, =omap_uart_phys @ MMU enabled
str \rp, [\rv, #0]
sub \rp, \rp, #0xff000000 @ phys base
......
......@@ -19,6 +19,9 @@
#define UART_OFFSET(addr) ((addr) & 0x00ffffff)
#define omap_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
#define omap_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
.pushsection .data
omap_uart_phys: .word 0
omap_uart_virt: .word 0
......@@ -36,7 +39,7 @@ omap_uart_lsr: .word 0
/* Use omap_uart_phys/virt if already configured */
10: mrc p15, 0, \rp, c1, c0
tst \rp, #1 @ MMU enabled?
ldreq \rp, =__virt_to_phys(omap_uart_phys) @ MMU not enabled
ldreq \rp, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
ldrne \rp, =omap_uart_phys @ MMU enabled
add \rv, \rp, #4 @ omap_uart_virt
ldr \rp, [\rp, #0]
......@@ -49,7 +52,7 @@ omap_uart_lsr: .word 0
mrc p15, 0, \rp, c1, c0
tst \rp, #1 @ MMU enabled?
ldreq \rp, =OMAP_UART_INFO @ MMU not enabled
ldrne \rp, =__phys_to_virt(OMAP_UART_INFO) @ MMU enabled
ldrne \rp, =omap_uart_p2v(OMAP_UART_INFO) @ MMU enabled
ldr \rp, [\rp, #0]
/* Select the UART to use based on the UART1 scratchpad value */
......@@ -94,7 +97,7 @@ omap_uart_lsr: .word 0
95: ldr \rp, =ZOOM_UART_BASE
mrc p15, 0, \rv, c1, c0
tst \rv, #1 @ MMU enabled?
ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled
ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
ldrne \rv, =omap_uart_phys @ MMU enabled
str \rp, [\rv, #0]
ldr \rp, =ZOOM_UART_VIRT
......@@ -109,7 +112,7 @@ omap_uart_lsr: .word 0
98: add \rp, \rp, #0x48000000 @ phys base
mrc p15, 0, \rv, c1, c0
tst \rv, #1 @ MMU enabled?
ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled
ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
ldrne \rv, =omap_uart_phys @ MMU enabled
str \rp, [\rv, #0]
sub \rp, \rp, #0x48000000 @ phys base
......@@ -131,7 +134,7 @@ omap_uart_lsr: .word 0
.macro busyuart,rd,rx
1001: mrc p15, 0, \rd, c1, c0
tst \rd, #1 @ MMU enabled?
ldreq \rd, =__virt_to_phys(omap_uart_lsr) @ MMU not enabled
ldreq \rd, =omap_uart_v2p(omap_uart_lsr) @ MMU disabled
ldrne \rd, =omap_uart_lsr @ MMU enabled
ldr \rd, [\rd, #0]
ldrb \rd, [\rx, \rd]
......
......@@ -7,6 +7,6 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PHYS_OFFSET UL(0x00000000)
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
......@@ -16,6 +16,6 @@
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0x80000000)
#define PLAT_PHYS_OFFSET UL(0x80000000)
#endif
......@@ -829,5 +829,5 @@ MACHINE_START(BALLOON3, "Balloon3")
.init_irq = balloon3_init_irq,
.timer = &pxa_timer,
.init_machine = balloon3_init,
.boot_params = PHYS_OFFSET + 0x100,
.boot_params = PLAT_PHYS_OFFSET + 0x100,
MACHINE_END
......@@ -15,7 +15,7 @@
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0xa0000000)
#define PLAT_PHYS_OFFSET UL(0xa0000000)
#if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
void cmx2xx_pci_adjust_zones(unsigned long *size, unsigned long *holes);
......
......@@ -24,9 +24,9 @@
* Physical DRAM offset.
*/
#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
#define PHYS_OFFSET UL(0x70000000)
#define PLAT_PHYS_OFFSET UL(0x70000000)
#else
#define PHYS_OFFSET UL(0x00000000)
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
#if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA)
......
......@@ -484,7 +484,7 @@ static void __init realview_eb_init(void)
MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.boot_params = PHYS_OFFSET + 0x00000100,
.boot_params = PLAT_PHYS_OFFSET + 0x00000100,
.fixup = realview_fixup,
.map_io = realview_eb_map_io,
.init_irq = gic_init_irq,
......
......@@ -379,7 +379,7 @@ static void __init realview_pb1176_init(void)
MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.boot_params = PHYS_OFFSET + 0x00000100,
.boot_params = PLAT_PHYS_OFFSET + 0x00000100,
.fixup = realview_pb1176_fixup,
.map_io = realview_pb1176_map_io,
.init_irq = gic_init_irq,
......
......@@ -381,7 +381,7 @@ static void __init realview_pb11mp_init(void)
MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.boot_params = PHYS_OFFSET + 0x00000100,
.boot_params = PLAT_PHYS_OFFSET + 0x00000100,
.fixup = realview_fixup,
.map_io = realview_pb11mp_map_io,
.init_irq = gic_init_irq,
......
......@@ -331,7 +331,7 @@ static void __init realview_pba8_init(void)
MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.boot_params = PHYS_OFFSET + 0x00000100,
.boot_params = PLAT_PHYS_OFFSET + 0x00000100,
.fixup = realview_fixup,
.map_io = realview_pba8_map_io,
.init_irq = gic_init_irq,
......
......@@ -414,7 +414,7 @@ static void __init realview_pbx_init(void)
MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.boot_params = PHYS_OFFSET + 0x00000100,
.boot_params = PLAT_PHYS_OFFSET + 0x00000100,
.fixup = realview_pbx_fixup,
.map_io = realview_pbx_map_io,
.init_irq = gic_init_irq,
......
......@@ -21,7 +21,7 @@
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0x10000000)
#define PLAT_PHYS_OFFSET UL(0x10000000)
/*
* Cache flushing area - ROM
......
......@@ -15,6 +15,6 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PHYS_OFFSET UL(0x0C000000)
#define PLAT_PHYS_OFFSET UL(0x0C000000)
#endif
......@@ -11,6 +11,6 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PHYS_OFFSET UL(0x30000000)
#define PLAT_PHYS_OFFSET UL(0x30000000)
#endif
......@@ -11,7 +11,7 @@
#ifndef __ASM_ARCH_24A0_MEMORY_H
#define __ASM_ARCH_24A0_MEMORY_H __FILE__
#define PHYS_OFFSET UL(0x10000000)
#define PLAT_PHYS_OFFSET UL(0x10000000)
#define __virt_to_bus(x) __virt_to_phys(x)
#define __bus_to_virt(x) __phys_to_virt(x)
......
......@@ -13,7 +13,7 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PHYS_OFFSET UL(0x50000000)
#define PLAT_PHYS_OFFSET UL(0x50000000)
#define CONSISTENT_DMA_SIZE SZ_8M
......
......@@ -13,7 +13,7 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PHYS_OFFSET UL(0x20000000)
#define PLAT_PHYS_OFFSET UL(0x20000000)
#define CONSISTENT_DMA_SIZE SZ_8M
#endif /* __ASM_ARCH_MEMORY_H */
......@@ -13,7 +13,7 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H __FILE__
#define PHYS_OFFSET UL(0x20000000)
#define PLAT_PHYS_OFFSET UL(0x20000000)
#define CONSISTENT_DMA_SIZE SZ_8M
#endif /* __ASM_ARCH_MEMORY_H */
......@@ -13,6 +13,6 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PHYS_OFFSET UL(0x20000000)
#define PLAT_PHYS_OFFSET UL(0x20000000)
#endif
......@@ -13,7 +13,7 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PHYS_OFFSET UL(0x20000000)
#define PLAT_PHYS_OFFSET UL(0x20000000)
#define CONSISTENT_DMA_SIZE (SZ_8M + SZ_4M + SZ_2M)
/*
......
......@@ -13,7 +13,7 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H __FILE__
#define PHYS_OFFSET UL(0x40000000)
#define PLAT_PHYS_OFFSET UL(0x40000000)
/* Maximum of 256MiB in one bank */
#define MAX_PHYSMEM_BITS 32
......
......@@ -12,7 +12,7 @@
/*
* Physical DRAM offset is 0xc0000000 on the SA1100
*/
#define PHYS_OFFSET UL(0xc0000000)
#define PLAT_PHYS_OFFSET UL(0xc0000000)
#ifndef __ASSEMBLY__
......
......@@ -15,7 +15,7 @@
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0x08000000)
#define PLAT_PHYS_OFFSET UL(0x08000000)
#ifndef __ASSEMBLY__
......
#ifndef __ASM_MACH_MEMORY_H
#define __ASM_MACH_MEMORY_H
#define PHYS_OFFSET UL(CONFIG_MEMORY_START)
#define PLAT_PHYS_OFFSET UL(CONFIG_MEMORY_START)
#define MEM_SIZE UL(CONFIG_MEMORY_SIZE)
/* DMA memory at 0xf6000000 - 0xffdfffff */
......
......@@ -54,7 +54,7 @@ static void __init tcc8k_map_io(void)
}
MACHINE_START(TCC8000_SDK, "Telechips TCC8000-SDK Demo Board")
.boot_params = PHYS_OFFSET + 0x00000100,
.boot_params = PLAT_PHYS_OFFSET + 0x00000100,
.map_io = tcc8k_map_io,
.init_irq = tcc8k_init_irq,
.init_machine = tcc8k_init,
......
......@@ -22,7 +22,7 @@
#define __MACH_TEGRA_MEMORY_H
/* physical offset of RAM */
#define PHYS_OFFSET UL(0)
#define PLAT_PHYS_OFFSET UL(0)
#endif
......@@ -15,17 +15,17 @@
#ifdef CONFIG_MACH_U300_DUAL_RAM
#define PHYS_OFFSET UL(0x48000000)
#define PLAT_PHYS_OFFSET UL(0x48000000)
#define BOOT_PARAMS_OFFSET (PHYS_OFFSET + 0x100)
#else
#ifdef CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
#define PHYS_OFFSET (0x28000000 + \
#define PLAT_PHYS_OFFSET (0x28000000 + \
(CONFIG_MACH_U300_ACCESS_MEM_SIZE - \
(CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
#else
#define PHYS_OFFSET (0x28000000 + \
#define PLAT_PHYS_OFFSET (0x28000000 + \
(CONFIG_MACH_U300_ACCESS_MEM_SIZE + \
(CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
#endif
......
......@@ -19,9 +19,9 @@
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/platform.h>
#include <mach/memory.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/memory.h>
static void __init u300_reserve(void)
{
......
......@@ -12,7 +12,7 @@
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0x00000000)
#define PLAT_PHYS_OFFSET UL(0x00000000)
#define BUS_OFFSET UL(0x00000000)
#endif
......@@ -23,6 +23,6 @@
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0x00000000)
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
......@@ -243,7 +243,7 @@ static void __init ct_ca9x4_init(void)
}
MACHINE_START(VEXPRESS, "ARM-Versatile Express CA9x4")
.boot_params = PHYS_OFFSET + 0x00000100,
.boot_params = PLAT_PHYS_OFFSET + 0x00000100,
.map_io = ct_ca9x4_map_io,
.init_irq = ct_ca9x4_init_irq,
#if 0
......
......@@ -20,6 +20,6 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PHYS_OFFSET UL(0x60000000)
#define PLAT_PHYS_OFFSET UL(0x60000000)
#endif
......@@ -18,6 +18,6 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PHYS_OFFSET UL(0x00000000)
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
......@@ -23,23 +23,23 @@
#if !defined(CONFIG_RUNTIME_PHYS_OFFSET)
# if defined CONFIG_ARCH_MX1
# define PHYS_OFFSET MX1_PHYS_OFFSET
# define PLAT_PHYS_OFFSET MX1_PHYS_OFFSET
# elif defined CONFIG_MACH_MX21
# define PHYS_OFFSET MX21_PHYS_OFFSET
# define PLAT_PHYS_OFFSET MX21_PHYS_OFFSET
# elif defined CONFIG_ARCH_MX25
# define PHYS_OFFSET MX25_PHYS_OFFSET
# define PLAT_PHYS_OFFSET MX25_PHYS_OFFSET
# elif defined CONFIG_MACH_MX27
# define PHYS_OFFSET MX27_PHYS_OFFSET
# define PLAT_PHYS_OFFSET MX27_PHYS_OFFSET
# elif defined CONFIG_ARCH_MX3
# define PHYS_OFFSET MX3x_PHYS_OFFSET
# define PLAT_PHYS_OFFSET MX3x_PHYS_OFFSET
# elif defined CONFIG_ARCH_MXC91231
# define PHYS_OFFSET MXC91231_PHYS_OFFSET
# define PLAT_PHYS_OFFSET MXC91231_PHYS_OFFSET
# elif defined CONFIG_ARCH_MX50
# define PHYS_OFFSET MX50_PHYS_OFFSET
# define PLAT_PHYS_OFFSET MX50_PHYS_OFFSET
# elif defined CONFIG_ARCH_MX51
# define PHYS_OFFSET MX51_PHYS_OFFSET
# define PLAT_PHYS_OFFSET MX51_PHYS_OFFSET
# elif defined CONFIG_ARCH_MX53
# define PHYS_OFFSET MX53_PHYS_OFFSET
# define PLAT_PHYS_OFFSET MX53_PHYS_OFFSET
# endif
#endif
......
......@@ -37,9 +37,9 @@
* Physical DRAM offset.
*/
#if defined(CONFIG_ARCH_OMAP1)
#define PHYS_OFFSET UL(0x10000000)
#define PLAT_PHYS_OFFSET UL(0x10000000)
#else
#define PHYS_OFFSET UL(0x80000000)
#define PLAT_PHYS_OFFSET UL(0x80000000)
#endif
/*
......
......@@ -27,7 +27,7 @@
* 2. We assume printascii is called at least once before paging_init,
* and addruart has a chance to read OMAP_UART_INFO
*/
#define OMAP_UART_INFO (PHYS_OFFSET + 0x3ffc)
#define OMAP_UART_INFO (PLAT_PHYS_OFFSET + 0x3ffc)
/* OMAP1 serial ports */
#define OMAP1_UART1_BASE 0xfffb0000
......
......@@ -15,6 +15,6 @@
#define __PLAT_MEMORY_H
/* Physical DRAM offset */
#define PHYS_OFFSET UL(0x00000000)
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif /* __PLAT_MEMORY_H */
......@@ -17,6 +17,6 @@
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0x40000000)
#define PLAT_PHYS_OFFSET UL(0x40000000)
#endif
......@@ -13,6 +13,6 @@
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0x20000000)
#define PLAT_PHYS_OFFSET UL(0x20000000)
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册