[netdrvr] Remove Linux-specific changelogs from several Becker template drivers

When in-kernel net drivers branched from Donald Becker's vanilla driver
set, in the days before BitKeeper and git, a driver changelog was
maintained in the driver source code.  These days, the kernel's
changelog is far superior and much more accurate, so the in-driver
changelogs are removed.

Another relic of the Becker/kernel split was version numbering, using
"foo-LKx.y.z" notation, resulting in weird version numbers like
"1.17b-LK1.1.9".  These drivers are for older hardware, and see few
changes these days, so the version numbers were all bumped to something
more simple.

Finally, in xircom_tulip_cb specifically, an additional cleanup removes
the always-enabled CARDBUS cpp macro.
Signed-off-by: NJeff Garzik <jeff@garzik.org>

drivers/net/dl2k.c

@@ -9,49 +9,10 @@
     the Free Software Foundation; either version 2 of the License, or
     (at your option) any later version.
 */
-/*
-    Rev		Date		Description
-    ==========================================================================
-    0.01	2001/05/03	Created DL2000-based linux driver
-    0.02	2001/05/21	Added VLAN and hardware checksum support.
-    1.00	2001/06/26	Added jumbo frame support.
-    1.01	2001/08/21	Added two parameters, rx_coalesce and rx_timeout.
-    1.02	2001/10/08	Supported fiber media.
-    				Added flow control parameters.
-    1.03	2001/10/12	Changed the default media to 1000mbps_fd for 
-    				the fiber devices.
-    1.04	2001/11/08	Fixed Tx stopped when tx very busy.
-    1.05	2001/11/22	Fixed Tx stopped when unidirectional tx busy.
-    1.06	2001/12/13	Fixed disconnect bug at 10Mbps mode.
-    				Fixed tx_full flag incorrect.
-				Added tx_coalesce paramter.
-    1.07	2002/01/03	Fixed miscount of RX frame error.
-    1.08	2002/01/17	Fixed the multicast bug.
-    1.09	2002/03/07	Move rx-poll-now to re-fill loop.	
-    				Added rio_timer() to watch rx buffers. 
-    1.10	2002/04/16	Fixed miscount of carrier error.
-    1.11	2002/05/23	Added ISR schedule scheme
-    				Fixed miscount of rx frame error for DGE-550SX.
-    				Fixed VLAN bug.
-    1.12	2002/06/13	Lock tx_coalesce=1 on 10/100Mbps mode.
-    1.13	2002/08/13	1. Fix disconnection (many tx:carrier/rx:frame
-    				   errs) with some mainboards.
-    				2. Use definition "DRV_NAME" "DRV_VERSION" 
-				   "DRV_RELDATE" for flexibility.	
-    1.14	2002/08/14	Support ethtool.	
-    1.15	2002/08/27	Changed the default media to Auto-Negotiation
-				for the fiber devices.    
-    1.16	2002/09/04      More power down time for fiber devices auto-
-    				negotiation.
-				Fix disconnect bug after ifup and ifdown.
-    1.17	2002/10/03	Fix RMON statistics overflow. 
-			     	Always use I/O mapping to access eeprom, 
-				avoid system freezing with some chipsets.
 
-*/
 #define DRV_NAME	"D-Link DL2000-based linux driver"
-#define DRV_VERSION	"v1.17b"
-#define DRV_RELDATE	"2006/03/10"
+#define DRV_VERSION	"v1.18"
+#define DRV_RELDATE	"2006/06/27"
 #include "dl2k.h"
 #include <linux/dma-mapping.h>
 

drivers/net/hamachi.c

@@ -20,22 +20,15 @@
 
 	Support and updates available at
 	http://www.scyld.com/network/hamachi.html
+	[link no longer provides useful info -jgarzik]
 	or
 	http://www.parl.clemson.edu/~keithu/hamachi.html
 
-
-
-	Linux kernel changelog:
-
-	LK1.0.1:
-	- fix lack of pci_dev<->dev association
-	- ethtool support (jgarzik)
-
 */
 
 #define DRV_NAME	"hamachi"
-#define DRV_VERSION	"1.01+LK1.0.1"
-#define DRV_RELDATE	"5/18/2001"
+#define DRV_VERSION	"2.0"
+#define DRV_RELDATE	"June 27, 2006"
 
 
 /* A few user-configurable values. */

drivers/net/natsemi.c

@@ -20,120 +20,9 @@
 
 	Support information and updates available at
 	http://www.scyld.com/network/netsemi.html
+	[link no longer provides useful info -jgarzik]
 
 
-	Linux kernel modifications:
-
-	Version 1.0.1:
-		- Spinlock fixes
-		- Bug fixes and better intr performance (Tjeerd)
-	Version 1.0.2:
-		- Now reads correct MAC address from eeprom
-	Version 1.0.3:
-		- Eliminate redundant priv->tx_full flag
-		- Call netif_start_queue from dev->tx_timeout
-		- wmb() in start_tx() to flush data
-		- Update Tx locking
-		- Clean up PCI enable (davej)
-	Version 1.0.4:
-		- Merge Donald Becker's natsemi.c version 1.07
-	Version 1.0.5:
-		- { fill me in }
-	Version 1.0.6:
-		* ethtool support (jgarzik)
-		* Proper initialization of the card (which sometimes
-		fails to occur and leaves the card in a non-functional
-		state). (uzi)
-
-		* Some documented register settings to optimize some
-		of the 100Mbit autodetection circuitry in rev C cards. (uzi)
-
-		* Polling of the PHY intr for stuff like link state
-		change and auto- negotiation to finally work properly. (uzi)
-
-		* One-liner removal of a duplicate declaration of
-		netdev_error(). (uzi)
-
-	Version 1.0.7: (Manfred Spraul)
-		* pci dma
-		* SMP locking update
-		* full reset added into tx_timeout
-		* correct multicast hash generation (both big and little endian)
-			[copied from a natsemi driver version
-			 from Myrio Corporation, Greg Smith]
-		* suspend/resume
-
-	version 1.0.8 (Tim Hockin <thockin@sun.com>)
-		* ETHTOOL_* support
-		* Wake on lan support (Erik Gilling)
-		* MXDMA fixes for serverworks
-		* EEPROM reload
-
-	version 1.0.9 (Manfred Spraul)
-		* Main change: fix lack of synchronize
-		netif_close/netif_suspend against a last interrupt
-		or packet.
-		* do not enable superflous interrupts (e.g. the
-		drivers relies on TxDone - TxIntr not needed)
-		* wait that the hardware has really stopped in close
-		and suspend.
-		* workaround for the (at least) gcc-2.95.1 compiler
-		problem. Also simplifies the code a bit.
-		* disable_irq() in tx_timeout - needed to protect
-		against rx interrupts.
-		* stop the nic before switching into silent rx mode
-		for wol (required according to docu).
-
-	version 1.0.10:
-		* use long for ee_addr (various)
-		* print pointers properly (DaveM)
-		* include asm/irq.h (?)
-
-	version 1.0.11:
-		* check and reset if PHY errors appear (Adrian Sun)
-		* WoL cleanup (Tim Hockin)
-		* Magic number cleanup (Tim Hockin)
-		* Don't reload EEPROM on every reset (Tim Hockin)
-		* Save and restore EEPROM state across reset (Tim Hockin)
-		* MDIO Cleanup (Tim Hockin)
-		* Reformat register offsets/bits (jgarzik)
-
-	version 1.0.12:
-		* ETHTOOL_* further support (Tim Hockin)
-
-	version 1.0.13:
-		* ETHTOOL_[G]EEPROM support (Tim Hockin)
-
-	version 1.0.13:
-		* crc cleanup (Matt Domsch <Matt_Domsch@dell.com>)
-
-	version 1.0.14:
-		* Cleanup some messages and autoneg in ethtool (Tim Hockin)
-
-	version 1.0.15:
-		* Get rid of cable_magic flag
-		* use new (National provided) solution for cable magic issue
-
-	version 1.0.16:
-		* call netdev_rx() for RxErrors (Manfred Spraul)
-		* formatting and cleanups
-		* change options and full_duplex arrays to be zero
-		  initialized
-		* enable only the WoL and PHY interrupts in wol mode
-
-	version 1.0.17:
-		* only do cable_magic on 83815 and early 83816 (Tim Hockin)
-		* create a function for rx refill (Manfred Spraul)
-		* combine drain_ring and init_ring (Manfred Spraul)
-		* oom handling (Manfred Spraul)
-		* hands_off instead of playing with netif_device_{de,a}ttach
-		  (Manfred Spraul)
-		* be sure to write the MAC back to the chip (Manfred Spraul)
-		* lengthen EEPROM timeout, and always warn about timeouts
-		  (Manfred Spraul)
-		* comments update (Manfred)
-		* do the right thing on a phy-reset (Manfred and Tim)
-
 	TODO:
 	* big endian support with CFG:BEM instead of cpu_to_le32
 */
@@ -165,8 +54,8 @@
 #include <asm/uaccess.h>
 
 #define DRV_NAME	"natsemi"
-#define DRV_VERSION	"1.07+LK1.0.17"
-#define DRV_RELDATE	"Sep 27, 2002"
+#define DRV_VERSION	"2.0"
+#define DRV_RELDATE	"June 27, 2006"
 
 #define RX_OFFSET	2
 

drivers/net/starfire.c

@@ -22,129 +22,13 @@
 
 	Support and updates available at
 	http://www.scyld.com/network/starfire.html
+	[link no longer provides useful info -jgarzik]
 
-	-----------------------------------------------------------
-
-	Linux kernel-specific changes:
-
-	LK1.1.1 (jgarzik):
-	- Use PCI driver interface
-	- Fix MOD_xxx races
-	- softnet fixups
-
-	LK1.1.2 (jgarzik):
-	- Merge Becker version 0.15
-
-	LK1.1.3 (Andrew Morton)
-	- Timer cleanups
-
-	LK1.1.4 (jgarzik):
-	- Merge Becker version 1.03
-
-	LK1.2.1 (Ion Badulescu <ionut@cs.columbia.edu>)
-	- Support hardware Rx/Tx checksumming
-	- Use the GFP firmware taken from Adaptec's Netware driver
-
-	LK1.2.2 (Ion Badulescu)
-	- Backported to 2.2.x
-
-	LK1.2.3 (Ion Badulescu)
-	- Fix the flaky mdio interface
-	- More compat clean-ups
-
-	LK1.2.4 (Ion Badulescu)
-	- More 2.2.x initialization fixes
-
-	LK1.2.5 (Ion Badulescu)
-	- Several fixes from Manfred Spraul
-
-	LK1.2.6 (Ion Badulescu)
-	- Fixed ifup/ifdown/ifup problem in 2.4.x
-
-	LK1.2.7 (Ion Badulescu)
-	- Removed unused code
-	- Made more functions static and __init
-
-	LK1.2.8 (Ion Badulescu)
-	- Quell bogus error messages, inform about the Tx threshold
-	- Removed #ifdef CONFIG_PCI, this driver is PCI only
-
-	LK1.2.9 (Ion Badulescu)
-	- Merged Jeff Garzik's changes from 2.4.4-pre5
-	- Added 2.2.x compatibility stuff required by the above changes
-
-	LK1.2.9a (Ion Badulescu)
-	- More updates from Jeff Garzik
-
-	LK1.3.0 (Ion Badulescu)
-	- Merged zerocopy support
-
-	LK1.3.1 (Ion Badulescu)
-	- Added ethtool support
-	- Added GPIO (media change) interrupt support
-
-	LK1.3.2 (Ion Badulescu)
-	- Fixed 2.2.x compatibility issues introduced in 1.3.1
-	- Fixed ethtool ioctl returning uninitialized memory
-
-	LK1.3.3 (Ion Badulescu)
-	- Initialize the TxMode register properly
-	- Don't dereference dev->priv after freeing it
-
-	LK1.3.4 (Ion Badulescu)
-	- Fixed initialization timing problems
-	- Fixed interrupt mask definitions
-
-	LK1.3.5 (jgarzik)
-	- ethtool NWAY_RST, GLINK, [GS]MSGLVL support
-
-	LK1.3.6:
-	- Sparc64 support and fixes (Ion Badulescu)
-	- Better stats and error handling (Ion Badulescu)
-	- Use new pci_set_mwi() PCI API function (jgarzik)
-
-	LK1.3.7 (Ion Badulescu)
-	- minimal implementation of tx_timeout()
-	- correctly shutdown the Rx/Tx engines in netdev_close()
-	- added calls to netif_carrier_on/off
-	(patch from Stefan Rompf <srompf@isg.de>)
-	- VLAN support
-
-	LK1.3.8 (Ion Badulescu)
-	- adjust DMA burst size on sparc64
-	- 64-bit support
-	- reworked zerocopy support for 64-bit buffers
-	- working and usable interrupt mitigation/latency
-	- reduced Tx interrupt frequency for lower interrupt overhead
-
-	LK1.3.9 (Ion Badulescu)
-	- bugfix for mcast filter
-	- enable the right kind of Tx interrupts (TxDMADone, not TxDone)
-
-	LK1.4.0 (Ion Badulescu)
-	- NAPI support
-
-	LK1.4.1 (Ion Badulescu)
-	- flush PCI posting buffers after disabling Rx interrupts
-	- put the chip to a D3 slumber on driver unload
-	- added config option to enable/disable NAPI
-
-	LK1.4.2 (Ion Badulescu)
-	- finally added firmware (GPL'ed by Adaptec)
-	- removed compatibility code for 2.2.x
-
-	LK1.4.2.1 (Ion Badulescu)
-	- fixed 32/64 bit issues on i386 + CONFIG_HIGHMEM
-	- added 32-bit padding to outgoing skb's, removed previous workaround
-
-TODO:	- fix forced speed/duplexing code (broken a long time ago, when
-	somebody converted the driver to use the generic MII code)
-	- fix VLAN support
 */
 
 #define DRV_NAME	"starfire"
-#define DRV_VERSION	"1.03+LK1.4.2.1"
-#define DRV_RELDATE	"October 3, 2005"
+#define DRV_VERSION	"2.0"
+#define DRV_RELDATE	"June 27, 2006"
 
 #include <linux/module.h>
 #include <linux/kernel.h>

drivers/net/sundance.c

@@ -16,91 +16,13 @@
 
 	Support and updates available at
 	http://www.scyld.com/network/sundance.html
+	[link no longer provides useful info -jgarzik]
 
-
-	Version LK1.01a (jgarzik):
-	- Replace some MII-related magic numbers with constants
-
-	Version LK1.02 (D-Link):
-	- Add new board to PCI ID list
-	- Fix multicast bug
-
-	Version LK1.03 (D-Link):
-	- New Rx scheme, reduce Rx congestion
-	- Option to disable flow control
-
-	Version LK1.04 (D-Link):
-	- Tx timeout recovery
-	- More support for ethtool.
-
-	Version LK1.04a:
-	- Remove unused/constant members from struct pci_id_info
-	(which then allows removal of 'drv_flags' from private struct)
-	(jgarzik)
-	- If no phy is found, fail to load that board (jgarzik)
-	- Always start phy id scan at id 1 to avoid problems (Donald Becker)
-	- Autodetect where mii_preable_required is needed,
-	default to not needed.  (Donald Becker)
-
-	Version LK1.04b:
-	- Remove mii_preamble_required module parameter (Donald Becker)
-	- Add per-interface mii_preamble_required (setting is autodetected)
-	  (Donald Becker)
-	- Remove unnecessary cast from void pointer (jgarzik)
-	- Re-align comments in private struct (jgarzik)
-
-	Version LK1.04c (jgarzik):
-	- Support bitmapped message levels (NETIF_MSG_xxx), and the
-	  two ethtool ioctls that get/set them
-	- Don't hand-code MII ethtool support, use standard API/lib
-
-	Version LK1.04d:
-	- Merge from Donald Becker's sundance.c: (Jason Lunz)
-		* proper support for variably-sized MTUs
-		* default to PIO, to fix chip bugs
-	- Add missing unregister_netdev (Jason Lunz)
-	- Add CONFIG_SUNDANCE_MMIO config option (jgarzik)
-	- Better rx buf size calculation (Donald Becker)
-
-	Version LK1.05 (D-Link):
-	- Fix DFE-580TX packet drop issue (for DL10050C)
-	- Fix reset_tx logic
-
-	Version LK1.06 (D-Link):
-	- Fix crash while unloading driver
-
-	Versin LK1.06b (D-Link):
-	- New tx scheme, adaptive tx_coalesce
-	
-	Version LK1.07 (D-Link):
-	- Fix tx bugs in big-endian machines
-	- Remove unused max_interrupt_work module parameter, the new 
-	  NAPI-like rx scheme doesn't need it.
-	- Remove redundancy get_stats() in intr_handler(), those 
-	  I/O access could affect performance in ARM-based system
-	- Add Linux software VLAN support
-	
-	Version LK1.08 (Philippe De Muyter phdm@macqel.be):
-	- Fix bug of custom mac address 
-	(StationAddr register only accept word write) 
-
-	Version LK1.09 (D-Link):
-	- Fix the flowctrl bug.	
-	- Set Pause bit in MII ANAR if flow control enabled.	
-
-	Version LK1.09a (ICPlus):
-	- Add the delay time in reading the contents of EEPROM
-
-	Version LK1.10 (Philippe De Muyter phdm@macqel.be):
-	- Make 'unblock interface after Tx underrun' work
-
-	Version LK1.11 (Pedro Alejandro Lopez-Valencia palopezv at gmail.com):
-	- Add support for IC Plus Corporation IP100A chipset
 */
 
 #define DRV_NAME	"sundance"
-#define DRV_VERSION	"1.01+LK1.11"
-#define DRV_RELDATE	"14-Jun-2006"
+#define DRV_VERSION	"1.1"
+#define DRV_RELDATE	"27-Jun-2006"
 
 
 /* The user-configurable values.

drivers/net/tulip/xircom_tulip_cb.c

@@ -10,26 +10,11 @@
 	410 Severn Ave., Suite 210
 	Annapolis MD 21403
 
-	-----------------------------------------------------------
-
-	Linux kernel-specific changes:
-
-	LK1.0 (Ion Badulescu)
-	- Major cleanup
-	- Use 2.4 PCI API
-	- Support ethtool
-	- Rewrite perfect filter/hash code
-	- Use interrupts for media changes
-
-	LK1.1 (Ion Badulescu)
-	- Disallow negotiation of unsupported full-duplex modes
 */
 
 #define DRV_NAME	"xircom_tulip_cb"
-#define DRV_VERSION	"0.91+LK1.1"
-#define DRV_RELDATE	"October 11, 2001"
-
-#define CARDBUS 1
+#define DRV_VERSION	"0.92"
+#define DRV_RELDATE	"June 27, 2006"
 
 /* A few user-configurable values. */
 
@@ -306,10 +291,10 @@ struct xircom_private {
 	struct xircom_tx_desc tx_ring[TX_RING_SIZE];
 	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
 	struct sk_buff* tx_skbuff[TX_RING_SIZE];
-#ifdef CARDBUS
+
 	/* The X3201-3 requires 4-byte aligned tx bufs */
 	struct sk_buff* tx_aligned_skbuff[TX_RING_SIZE];
-#endif
+
 	/* The addresses of receive-in-place skbuffs. */
 	struct sk_buff* rx_skbuff[RX_RING_SIZE];
 	u16 setup_frame[PKT_SETUP_SZ / sizeof(u16)];	/* Pseudo-Tx frame to init address table. */
@@ -908,10 +893,8 @@ static void xircom_init_ring(struct net_device *dev)
 		tp->tx_skbuff[i] = NULL;
 		tp->tx_ring[i].status = 0;
 		tp->tx_ring[i].buffer2 = virt_to_bus(&tp->tx_ring[i+1]);
-#ifdef CARDBUS
 		if (tp->chip_id == X3201_3)
 			tp->tx_aligned_skbuff[i] = dev_alloc_skb(PKT_BUF_SZ);
-#endif /* CARDBUS */
 	}
 	tp->tx_ring[i-1].buffer2 = virt_to_bus(&tp->tx_ring[0]);
 }
@@ -931,12 +914,10 @@ xircom_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	entry = tp->cur_tx % TX_RING_SIZE;
 
 	tp->tx_skbuff[entry] = skb;
-#ifdef CARDBUS
 	if (tp->chip_id == X3201_3) {
 		memcpy(tp->tx_aligned_skbuff[entry]->data,skb->data,skb->len);
 		tp->tx_ring[entry].buffer1 = virt_to_bus(tp->tx_aligned_skbuff[entry]->data);
 	} else
-#endif
 		tp->tx_ring[entry].buffer1 = virt_to_bus(skb->data);
 
 	if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE/2) {/* Typical path */

drivers/net/via-rhine.c

@@ -25,117 +25,13 @@
 	version. He may or may not be interested in bug reports on this
 	code. You can find his versions at:
 	http://www.scyld.com/network/via-rhine.html
-
-
-	Linux kernel version history:
-
-	LK1.1.0:
-	- Jeff Garzik: softnet 'n stuff
-
-	LK1.1.1:
-	- Justin Guyett: softnet and locking fixes
-	- Jeff Garzik: use PCI interface
-
-	LK1.1.2:
-	- Urban Widmark: minor cleanups, merges from Becker 1.03a/1.04 versions
-
-	LK1.1.3:
-	- Urban Widmark: use PCI DMA interface (with thanks to the eepro100.c
-			 code) update "Theory of Operation" with
-			 softnet/locking changes
-	- Dave Miller: PCI DMA and endian fixups
-	- Jeff Garzik: MOD_xxx race fixes, updated PCI resource allocation
-
-	LK1.1.4:
-	- Urban Widmark: fix gcc 2.95.2 problem and
-	                 remove writel's to fixed address 0x7c
-
-	LK1.1.5:
-	- Urban Widmark: mdio locking, bounce buffer changes
-	                 merges from Beckers 1.05 version
-	                 added netif_running_on/off support
-
-	LK1.1.6:
-	- Urban Widmark: merges from Beckers 1.08b version (VT6102 + mdio)
-	                 set netif_running_on/off on startup, del_timer_sync
-
-	LK1.1.7:
-	- Manfred Spraul: added reset into tx_timeout
-
-	LK1.1.9:
-	- Urban Widmark: merges from Beckers 1.10 version
-	                 (media selection + eeprom reload)
-	- David Vrabel:  merges from D-Link "1.11" version
-	                 (disable WOL and PME on startup)
-
-	LK1.1.10:
-	- Manfred Spraul: use "singlecopy" for unaligned buffers
-	                  don't allocate bounce buffers for !ReqTxAlign cards
-
-	LK1.1.11:
-	- David Woodhouse: Set dev->base_addr before the first time we call
-			   wait_for_reset(). It's a lot happier that way.
-			   Free np->tx_bufs only if we actually allocated it.
-
-	LK1.1.12:
-	- Martin Eriksson: Allow Memory-Mapped IO to be enabled.
-
-	LK1.1.13 (jgarzik):
-	- Add ethtool support
-	- Replace some MII-related magic numbers with constants
-
-	LK1.1.14 (Ivan G.):
-	- fixes comments for Rhine-III
-	- removes W_MAX_TIMEOUT (unused)
-	- adds HasDavicomPhy for Rhine-I (basis: linuxfet driver; my card
-	  is R-I and has Davicom chip, flag is referenced in kernel driver)
-	- sends chip_id as a parameter to wait_for_reset since np is not
-	  initialized on first call
-	- changes mmio "else if (chip_id==VT6102)" to "else" so it will work
-	  for Rhine-III's (documentation says same bit is correct)
-	- transmit frame queue message is off by one - fixed
-	- adds IntrNormalSummary to "Something Wicked" exclusion list
-	  so normal interrupts will not trigger the message (src: Donald Becker)
-	(Roger Luethi)
-	- show confused chip where to continue after Tx error
-	- location of collision counter is chip specific
-	- allow selecting backoff algorithm (module parameter)
-
-	LK1.1.15 (jgarzik):
-	- Use new MII lib helper generic_mii_ioctl
-
-	LK1.1.16 (Roger Luethi)
-	- Etherleak fix
-	- Handle Tx buffer underrun
-	- Fix bugs in full duplex handling
-	- New reset code uses "force reset" cmd on Rhine-II
-	- Various clean ups
-
-	LK1.1.17 (Roger Luethi)
-	- Fix race in via_rhine_start_tx()
-	- On errors, wait for Tx engine to turn off before scavenging
-	- Handle Tx descriptor write-back race on Rhine-II
-	- Force flushing for PCI posted writes
-	- More reset code changes
-
-	LK1.1.18 (Roger Luethi)
-	- No filtering multicast in promisc mode (Edward Peng)
-	- Fix for Rhine-I Tx timeouts
-
-	LK1.1.19 (Roger Luethi)
-	- Increase Tx threshold for unspecified errors
-
-	LK1.2.0-2.6 (Roger Luethi)
-	- Massive clean-up
-	- Rewrite PHY, media handling (remove options, full_duplex, backoff)
-	- Fix Tx engine race for good
-	- Craig Brind: Zero padded aligned buffers for short packets.
+	[link no longer provides useful info -jgarzik]
 
 */
 
 #define DRV_NAME	"via-rhine"
-#define DRV_VERSION	"1.2.0-2.6"
-#define DRV_RELDATE	"June-10-2004"
+#define DRV_VERSION	"1.4.0"
+#define DRV_RELDATE	"June-27-2006"
 
 
 /* A few user-configurable values.

drivers/net/yellowfin.c

@@ -19,37 +19,13 @@
 
 	Support and updates available at
 	http://www.scyld.com/network/yellowfin.html
+	[link no longer provides useful info -jgarzik]
 
-
-	Linux kernel changelog:
-	-----------------------
-
-	LK1.1.1 (jgarzik): Port to 2.4 kernel
-
-	LK1.1.2 (jgarzik):
-	* Merge in becker version 1.05
-
-	LK1.1.3 (jgarzik):
-	* Various cleanups
-	* Update yellowfin_timer to correctly calculate duplex.
-	(suggested by Manfred Spraul)
-
-	LK1.1.4 (val@nmt.edu):
-	* Fix three endian-ness bugs
-	* Support dual function SYM53C885E ethernet chip
-	
-	LK1.1.5 (val@nmt.edu):
-	* Fix forced full-duplex bug I introduced
-
-	LK1.1.6 (val@nmt.edu):
-	* Only print warning on truly "oversized" packets
-	* Fix theoretical bug on gigabit cards - return to 1.1.3 behavior
-	
 */
 
 #define DRV_NAME	"yellowfin"
-#define DRV_VERSION	"1.05+LK1.1.6"
-#define DRV_RELDATE	"Feb 11, 2002"
+#define DRV_VERSION	"2.0"
+#define DRV_RELDATE	"Jun 27, 2006"
 
 #define PFX DRV_NAME ": "