提交 01fbfe0b 编写于 作者: M Matthew Wilcox 提交者: James Bottomley

[SCSI] advansys: Use DRV_NAME

Follow the example of some other drivers by defining DRV_NAME to be
"advansys".  Prevents spelling mistakes.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
上级 95c9f162
#define DRV_NAME "advansys"
#define ASC_VERSION "3.4" /* AdvanSys Driver Version */
/*
......@@ -3213,11 +3214,11 @@ advansys_biosparam(struct scsi_device *sdev, struct block_device *bdev,
}
static struct scsi_host_template advansys_template = {
.proc_name = "advansys",
.proc_name = DRV_NAME,
#ifdef CONFIG_PROC_FS
.proc_info = advansys_proc_info,
#endif
.name = "advansys",
.name = DRV_NAME,
.info = advansys_info,
.queuecommand = advansys_queuecommand,
.eh_bus_reset_handler = advansys_reset,
......@@ -14634,7 +14635,7 @@ advansys_board_found(int iop, struct device *dev, int bus_type)
/* Register DMA channel for ISA bus. */
if (asc_dvc_varp->bus_type & ASC_IS_ISA) {
shost->dma_channel = asc_dvc_varp->cfg->isa_dma_channel;
ret = request_dma(shost->dma_channel, "advansys");
ret = request_dma(shost->dma_channel, DRV_NAME);
if (ret) {
ASC_PRINT3
("advansys_board_found: board %d: request_dma() %d failed %d\n",
......@@ -14650,7 +14651,7 @@ advansys_board_found(int iop, struct device *dev, int bus_type)
ASC_DBG1(2, "advansys_board_found: request_irq() %d\n", shost->irq);
ret = request_irq(shost->irq, advansys_interrupt, share_irq,
"advansys", shost);
DRV_NAME, shost);
if (ret) {
if (ret == -EBUSY) {
......@@ -14754,7 +14755,7 @@ static int __devinit advansys_isa_probe(struct device *dev, unsigned int id)
PortAddr iop_base = _asc_def_iop_base[id];
struct Scsi_Host *shost;
if (!request_region(iop_base, ASC_IOADR_GAP, "advansys")) {
if (!request_region(iop_base, ASC_IOADR_GAP, DRV_NAME)) {
ASC_DBG1(1, "advansys_isa_match: I/O port 0x%x busy\n",
iop_base);
return -ENODEV;
......@@ -14790,7 +14791,7 @@ static struct isa_driver advansys_isa_driver = {
.remove = __devexit_p(advansys_isa_remove),
.driver = {
.owner = THIS_MODULE,
.name = "advansys",
.name = DRV_NAME,
},
};
......@@ -14799,7 +14800,7 @@ static int __devinit advansys_vlb_probe(struct device *dev, unsigned int id)
PortAddr iop_base = _asc_def_iop_base[id];
struct Scsi_Host *shost;
if (!request_region(iop_base, ASC_IOADR_GAP, "advansys")) {
if (!request_region(iop_base, ASC_IOADR_GAP, DRV_NAME)) {
ASC_DBG1(1, "advansys_vlb_match: I/O port 0x%x busy\n",
iop_base);
return -ENODEV;
......@@ -14867,7 +14868,7 @@ static int __devinit advansys_eisa_probe(struct device *dev)
err = -ENODEV;
for (i = 0; i < 2; i++, ioport += 0x20) {
if (!request_region(ioport, ASC_IOADR_GAP, "advansys")) {
if (!request_region(ioport, ASC_IOADR_GAP, DRV_NAME)) {
printk(KERN_WARNING "Region %x-%x busy\n", ioport,
ioport + ASC_IOADR_GAP - 1);
continue;
......@@ -14925,7 +14926,7 @@ static __devexit int advansys_eisa_remove(struct device *dev)
static struct eisa_driver advansys_eisa_driver = {
.id_table = advansys_eisa_table,
.driver = {
.name = "advansys",
.name = DRV_NAME,
.probe = advansys_eisa_probe,
.remove = __devexit_p(advansys_eisa_remove),
}
......@@ -14972,7 +14973,7 @@ advansys_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
err = pci_enable_device(pdev);
if (err)
goto fail;
err = pci_request_regions(pdev, "advansys");
err = pci_request_regions(pdev, DRV_NAME);
if (err)
goto disable_device;
pci_set_master(pdev);
......@@ -15007,7 +15008,7 @@ static void __devexit advansys_pci_remove(struct pci_dev *pdev)
}
static struct pci_driver advansys_pci_driver = {
.name = "advansys",
.name = DRV_NAME,
.id_table = advansys_pci_tbl,
.probe = advansys_pci_probe,
.remove = __devexit_p(advansys_pci_remove),
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册