Skip to content

L
linux

xiphi1978 / linux

通知 2
Star 0
Fork 0
L
linux

体验新版 GitCode，发现更多精彩内容 >>

提交 0151f94f 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  Blackfin arch: be less noisy when gets a gpio conflict after kernel has booted
  Blackfin arch: add RSI's definitions to bf514 and bf516
  Blackfin arch: add link-time asserts to make sure on-chip regions dont overflow
  Blackfin arch: sport spi needs 6 gpio pins
  Blackfin arch: add sport-spi related resource stuff to board file
  Blackfin arch: Blacklist Hibernate (PM_SUSPEND_MEM) on BF561 as well
  Blackfin arch: Privide BF537-STAMP platform data of ADP5520 Multifunction driver
  Blackfin arch: enable the platfrom PATA driver with CF Cards
  Blackfin arch: clean up sports header file
  Blackfin arch: convert BF5{18,27,48}_FAMILY to CONFIG_BF{51,52,54}x
  Blackfin arch: bf51x processors also have 8 timers
  Blackfin arch: add a check to make sure only Blackfin GPIOs may generate IRQs
  Blackfin arch: update default kernel configuration
  Blackfin arch: include linux headers that this one uses definitions from fro sport drivers
上级 7c730ccd d6879c58
隐藏空白更改
内联 并排
Showing with 1204 addition and 537 deletion
arch/blackfin/configs/BF518F-EZBRD_defconfig
浏览文件 @ 0151f94f
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.28
# Fri Feb 20 10:01:44 2009
# Linux kernel version: 2.6.28.7
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
......@@ -43,7 +42,7 @@ CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
......@@ -56,13 +55,13 @@ CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_AIO=y
# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
......@@ -314,7 +313,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
CONFIG_BFIN_GPTIMERS=y
CONFIG_BFIN_GPTIMERS=m
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
......@@ -375,7 +374,6 @@ CONFIG_BINFMT_ZFLAT=y
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM_WAKEUP_BY_GPIO is not set
#
# CPU Frequency scaling
......@@ -634,6 +632,7 @@ CONFIG_BFIN_RX_DESC_NUM=20
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
......@@ -793,6 +792,7 @@ CONFIG_SPI_MASTER=y
#
CONFIG_SPI_BFIN=y
# CONFIG_SPI_BFIN_LOCK is not set
# CONFIG_SPI_BFIN_SPORT is not set
# CONFIG_SPI_BITBANG is not set
#
......@@ -816,6 +816,12 @@ CONFIG_WATCHDOG=y
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
......@@ -865,7 +871,26 @@ CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
CONFIG_SDH_BFIN=m
CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y
CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ=y
# CONFIG_MMC_SPI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
......@@ -1121,7 +1146,6 @@ CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_KGDB_TESTCASE is not set
CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
# CONFIG_DEBUG_HWERR is not set
......
arch/blackfin/configs/BF526-EZBRD_defconfig
浏览文件 @ 0151f94f
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.28-rc2
# Linux kernel version: 2.6.28.7
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
......@@ -42,7 +42,7 @@ CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
......@@ -55,13 +55,13 @@ CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_AIO=y
# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
......@@ -132,15 +132,20 @@ CONFIG_BF526=y
# CONFIG_BF538 is not set
# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
CONFIG_BF_REV_MIN=0
CONFIG_BF_REV_MAX=2
CONFIG_BF_REV_0_0=y
# CONFIG_BF_REV_0_1 is not set
# CONFIG_BF_REV_0_0 is not set
CONFIG_BF_REV_0_1=y
# CONFIG_BF_REV_0_2 is not set
# CONFIG_BF_REV_0_3 is not set
# CONFIG_BF_REV_0_4 is not set
......@@ -313,7 +318,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
CONFIG_BFIN_GPTIMERS=y
CONFIG_BFIN_GPTIMERS=m
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
......@@ -374,7 +379,6 @@ CONFIG_BINFMT_ZFLAT=y
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM_WAKEUP_BY_GPIO is not set
#
# CPU Frequency scaling
......@@ -583,7 +587,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
......@@ -637,6 +643,7 @@ CONFIG_BFIN_MAC_RMII=y
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_AX88180 is not set
CONFIG_NETDEV_10000=y
......@@ -815,6 +822,7 @@ CONFIG_SPI_MASTER=y
#
CONFIG_SPI_BFIN=y
# CONFIG_SPI_BFIN_LOCK is not set
# CONFIG_SPI_BFIN_SPORT is not set
# CONFIG_SPI_BITBANG is not set
#
......@@ -838,6 +846,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
......@@ -896,6 +905,12 @@ CONFIG_BFIN_WDT=y
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
......@@ -904,8 +919,10 @@ CONFIG_BFIN_WDT=y
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
......@@ -940,55 +957,7 @@ CONFIG_BFIN_WDT=y
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_SPI=y
#
# ALSA Blackfin devices
#
# CONFIG_SND_BLACKFIN_AD1836 is not set
# CONFIG_SND_BFIN_AD73322 is not set
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_CAIAQ is not set
CONFIG_SND_SOC=m
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_BF5XX_I2S=m
CONFIG_SND_BF5XX_SOC_SSM2602=m
# CONFIG_SND_BF5XX_SOC_AD73311 is not set
CONFIG_SND_BF5XX_AC97=m
CONFIG_SND_BF5XX_MMAP_SUPPORT=y
# CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set
CONFIG_SND_BF5XX_SOC_SPORT=m
CONFIG_SND_BF5XX_SOC_I2S=m
CONFIG_SND_BF5XX_SOC_AC97=m
CONFIG_SND_BF5XX_SOC_AD1980=m
CONFIG_SND_BF5XX_SPORT_NUM=0
# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
# CONFIG_SND_SOC_ALL_CODECS is not set
CONFIG_SND_SOC_AD1980=m
CONFIG_SND_SOC_SSM2602=m
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
......@@ -1063,13 +1032,15 @@ CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_SOC=y
#
# Blackfin high speed USB support
# Blackfin high speed USB Support
#
CONFIG_USB_MUSB_HOST=y
# CONFIG_USB_MUSB_PERIPHERAL is not set
# CONFIG_USB_MUSB_OTG is not set
# CONFIG_USB_GADGET_MUSB_HDRC is not set
CONFIG_USB_MUSB_HDRC_HCD=y
CONFIG_MUSB_PIO_ONLY=y
CONFIG_MUSB_DMA_POLL=y
# CONFIG_USB_MUSB_DEBUG is not set
#
......@@ -1081,18 +1052,33 @@ CONFIG_MUSB_PIO_ONLY=y
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
# may also be needed; see USB_STORAGE Help for more information
# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
......@@ -1124,6 +1110,30 @@ CONFIG_MUSB_PIO_ONLY=y
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
# CONFIG_USB_GADGET_NET2272 is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
......@@ -1158,12 +1168,14 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
......@@ -1384,6 +1396,13 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
#
# Tracers
#
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
......@@ -1423,6 +1442,7 @@ CONFIG_CRYPTO=y
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
......
arch/blackfin/configs/BF527-EZKIT_defconfig
浏览文件 @ 0151f94f
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.28-rc2
# Linux kernel version: 2.6.28.7
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
......@@ -36,14 +36,13 @@ CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
......@@ -56,13 +55,13 @@ CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_AIO=y
# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
......@@ -133,15 +132,20 @@ CONFIG_BF527=y
# CONFIG_BF538 is not set
# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
CONFIG_BF_REV_MIN=0
CONFIG_BF_REV_MAX=2
CONFIG_BF_REV_0_0=y
# CONFIG_BF_REV_0_1 is not set
# CONFIG_BF_REV_0_0 is not set
CONFIG_BF_REV_0_1=y
# CONFIG_BF_REV_0_2 is not set
# CONFIG_BF_REV_0_3 is not set
# CONFIG_BF_REV_0_4 is not set
......@@ -314,7 +318,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
CONFIG_BFIN_GPTIMERS=y
CONFIG_BFIN_GPTIMERS=m
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
......@@ -375,7 +379,6 @@ CONFIG_BINFMT_ZFLAT=y
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM_WAKEUP_BY_GPIO is not set
#
# CPU Frequency scaling
......@@ -626,7 +629,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
......@@ -681,6 +686,7 @@ CONFIG_BFIN_MAC_RMII=y
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_AX88180 is not set
CONFIG_NETDEV_10000=y
......@@ -755,8 +761,8 @@ CONFIG_INPUT_MISC=y
# CONFIG_SPI_ADC_BF533 is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
# CONFIG_BFIN_SPORT is not set
CONFIG_BF5xx_PPI=m
CONFIG_BFIN_SPORT=m
# CONFIG_BFIN_TIMER_LATENCY is not set
# CONFIG_TWI_LCD is not set
CONFIG_BFIN_DMA_INTERFACE=m
......@@ -859,6 +865,7 @@ CONFIG_SPI_MASTER=y
#
CONFIG_SPI_BFIN=y
# CONFIG_SPI_BFIN_LOCK is not set
# CONFIG_SPI_BFIN_SPORT is not set
# CONFIG_SPI_BITBANG is not set
#
......@@ -871,60 +878,7 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
......@@ -940,6 +894,12 @@ CONFIG_BFIN_WDT=y
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
......@@ -948,8 +908,10 @@ CONFIG_BFIN_WDT=y
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
......@@ -1000,6 +962,7 @@ CONFIG_FB_BFIN_T350MCQB=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_LTV350QV=m
......@@ -1152,13 +1115,15 @@ CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_SOC=y
#
# Blackfin high speed USB support
# Blackfin high speed USB Support
#
CONFIG_USB_MUSB_HOST=y
# CONFIG_USB_MUSB_PERIPHERAL is not set
# CONFIG_USB_MUSB_OTG is not set
# CONFIG_USB_GADGET_MUSB_HDRC is not set
CONFIG_USB_MUSB_HDRC_HCD=y
CONFIG_MUSB_PIO_ONLY=y
CONFIG_MUSB_DMA_POLL=y
# CONFIG_USB_MUSB_DEBUG is not set
#
......@@ -1170,18 +1135,33 @@ CONFIG_MUSB_PIO_ONLY=y
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
# may also be needed; see USB_STORAGE Help for more information
# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
......@@ -1213,6 +1193,30 @@ CONFIG_MUSB_PIO_ONLY=y
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
# CONFIG_USB_GADGET_NET2272 is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
......@@ -1247,12 +1251,14 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
......@@ -1473,6 +1479,13 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
#
# Tracers
#
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
......@@ -1512,6 +1525,7 @@ CONFIG_CRYPTO=y
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
......
arch/blackfin/configs/BF533-EZKIT_defconfig
浏览文件 @ 0151f94f
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.28-rc2
# Linux kernel version: 2.6.28.7
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
......@@ -36,14 +36,13 @@ CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
......@@ -56,13 +55,13 @@ CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_AIO=y
# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
......@@ -133,10 +132,15 @@ CONFIG_BF533=y
# CONFIG_BF538 is not set
# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
CONFIG_BF_REV_MIN=3
CONFIG_BF_REV_MAX=6
......@@ -157,7 +161,6 @@ CONFIG_BFIN533_EZKIT=y
# CONFIG_BFIN533_BLUETECHNIX_CM is not set
# CONFIG_H8606_HVSISTEMAS is not set
# CONFIG_BFIN532_IP0X is not set
# CONFIG_GENERIC_BF533_BOARD is not set
#
# BF533/2/1 Specific Configuration
......@@ -277,7 +280,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
# CONFIG_BFIN_GPTIMERS is not set
CONFIG_BFIN_GPTIMERS=m
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
......@@ -575,6 +578,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
......@@ -608,6 +612,7 @@ CONFIG_SMC91X=y
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_AX88180 is not set
CONFIG_NETDEV_10000=y
......@@ -714,6 +719,7 @@ CONFIG_SPI_MASTER=y
#
CONFIG_SPI_BFIN=y
# CONFIG_SPI_BFIN_LOCK is not set
# CONFIG_SPI_BFIN_SPORT is not set
# CONFIG_SPI_BITBANG is not set
#
......@@ -726,22 +732,7 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
......@@ -752,6 +743,12 @@ CONFIG_WATCHDOG=y
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
......@@ -760,7 +757,7 @@ CONFIG_BFIN_WDT=y
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
......@@ -826,6 +823,7 @@ CONFIG_RTC_INTF_DEV=y
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
......@@ -1046,6 +1044,13 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
#
# Tracers
#
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
......@@ -1084,6 +1089,7 @@ CONFIG_CRYPTO=y
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
......
arch/blackfin/configs/BF533-STAMP_defconfig
浏览文件 @ 0151f94f
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.28-rc2
# Linux kernel version: 2.6.28.7
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
......@@ -36,14 +36,13 @@ CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
......@@ -56,13 +55,13 @@ CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_AIO=y
# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
......@@ -133,10 +132,15 @@ CONFIG_BF533=y
# CONFIG_BF538 is not set
# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
CONFIG_BF_REV_MIN=3
CONFIG_BF_REV_MAX=6
......@@ -157,7 +161,6 @@ CONFIG_BFIN533_STAMP=y
# CONFIG_BFIN533_BLUETECHNIX_CM is not set
# CONFIG_H8606_HVSISTEMAS is not set
# CONFIG_BFIN532_IP0X is not set
# CONFIG_GENERIC_BF533_BOARD is not set
#
# BF533/2/1 Specific Configuration
......@@ -277,7 +280,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
# CONFIG_BFIN_GPTIMERS is not set
CONFIG_BFIN_GPTIMERS=m
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
......@@ -578,7 +581,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
......@@ -612,6 +617,7 @@ CONFIG_SMC91X=y
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_AX88180 is not set
CONFIG_NETDEV_10000=y
......@@ -671,10 +677,10 @@ CONFIG_CONFIG_INPUT_PCF8574=m
# CONFIG_SPI_ADC_BF533 is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
CONFIG_BFIN_SPORT=y
CONFIG_BF5xx_PPI=m
CONFIG_BFIN_SPORT=m
# CONFIG_BFIN_TIMER_LATENCY is not set
CONFIG_TWI_LCD=m
# CONFIG_TWI_LCD is not set
CONFIG_BFIN_DMA_INTERFACE=m
CONFIG_SIMPLE_GPIO=m
# CONFIG_VT is not set
......@@ -765,6 +771,7 @@ CONFIG_SPI_MASTER=y
#
CONFIG_SPI_BFIN=y
# CONFIG_SPI_BFIN_LOCK is not set
# CONFIG_SPI_BFIN_SPORT is not set
# CONFIG_SPI_BITBANG is not set
#
......@@ -777,60 +784,7 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
......@@ -841,6 +795,12 @@ CONFIG_WATCHDOG=y
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
......@@ -851,6 +811,7 @@ CONFIG_BFIN_WDT=y
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
......@@ -909,6 +870,7 @@ CONFIG_ADV7393_1XMEM=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
......@@ -1018,12 +980,14 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
......@@ -1244,6 +1208,13 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
#
# Tracers
#
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
......@@ -1282,6 +1253,7 @@ CONFIG_CRYPTO=y
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
......
arch/blackfin/configs/BF537-STAMP_defconfig
浏览文件 @ 0151f94f
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.28-rc2
# Tue Dec 30 17:24:37 2008
# Linux kernel version: 2.6.28.7
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
......@@ -37,14 +36,13 @@ CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
......@@ -57,13 +55,13 @@ CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_AIO=y
# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
......@@ -134,10 +132,15 @@ CONFIG_BF537=y
# CONFIG_BF538 is not set
# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
CONFIG_BF_REV_MIN=2
CONFIG_BF_REV_MAX=3
......@@ -184,7 +187,6 @@ CONFIG_BFIN537_STAMP=y
# CONFIG_BFIN537_BLUETECHNIX_TCM is not set
# CONFIG_PNAV10 is not set
# CONFIG_CAMSIG_MINOTAUR is not set
# CONFIG_GENERIC_BF537_BOARD is not set
#
# BF537 Specific Configuration
......@@ -589,7 +591,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
......@@ -644,6 +648,7 @@ CONFIG_BFIN_RX_DESC_NUM=20
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_AX88180 is not set
CONFIG_NETDEV_10000=y
......@@ -706,10 +711,10 @@ CONFIG_SERIO_LIBPS2=y
# CONFIG_SPI_ADC_BF533 is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
CONFIG_BF5xx_PPI=m
CONFIG_BFIN_SPORT=m
# CONFIG_BFIN_TIMER_LATENCY is not set
CONFIG_TWI_LCD=m
# CONFIG_TWI_LCD is not set
CONFIG_BFIN_DMA_INTERFACE=m
CONFIG_SIMPLE_GPIO=m
# CONFIG_VT is not set
......@@ -808,6 +813,7 @@ CONFIG_SPI_MASTER=y
#
CONFIG_SPI_BFIN=y
# CONFIG_SPI_BFIN_LOCK is not set
# CONFIG_SPI_BFIN_SPORT is not set
# CONFIG_SPI_BITBANG is not set
#
......@@ -820,60 +826,7 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
......@@ -884,6 +837,12 @@ CONFIG_WATCHDOG=y
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
......@@ -894,6 +853,7 @@ CONFIG_BFIN_WDT=y
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
......@@ -957,6 +917,7 @@ CONFIG_ADV7393_1XMEM=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_LTV350QV is not set
......@@ -1074,12 +1035,14 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
......@@ -1300,6 +1263,13 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
#
# Tracers
#
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
......@@ -1338,6 +1308,7 @@ CONFIG_CRYPTO=y
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
......
arch/blackfin/configs/BF538-EZKIT_defconfig
浏览文件 @ 0151f94f
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.28-rc2
# Linux kernel version: 2.6.28.7
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
......@@ -42,7 +42,7 @@ CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
......@@ -55,13 +55,13 @@ CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_AIO=y
# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
......@@ -132,10 +132,15 @@ CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_BF538=y
# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
CONFIG_BF_REV_MIN=4
CONFIG_BF_REV_MAX=5
......@@ -293,7 +298,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
CONFIG_BFIN_GPTIMERS=y
CONFIG_BFIN_GPTIMERS=m
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
......@@ -354,7 +359,6 @@ CONFIG_BINFMT_ZFLAT=y
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM_WAKEUP_BY_GPIO is not set
#
# CPU Frequency scaling
......@@ -645,6 +649,7 @@ CONFIG_SMC91X=y
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
......@@ -690,7 +695,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
CONFIG_TOUCHSCREEN_AD7879_SPI=y
CONFIG_TOUCHSCREEN_AD7879=m
CONFIG_TOUCHSCREEN_AD7879=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
......@@ -718,8 +723,8 @@ CONFIG_INPUT_MISC=y
# CONFIG_SPI_ADC_BF533 is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
CONFIG_BFIN_SPORT=y
CONFIG_BF5xx_PPI=m
CONFIG_BFIN_SPORT=m
# CONFIG_BFIN_TIMER_LATENCY is not set
# CONFIG_TWI_LCD is not set
CONFIG_BFIN_DMA_INTERFACE=m
......@@ -762,7 +767,7 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
......@@ -774,7 +779,7 @@ CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_BLACKFIN_TWI=y
CONFIG_I2C_BLACKFIN_TWI=m
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
......@@ -818,6 +823,7 @@ CONFIG_SPI_MASTER=y
#
CONFIG_SPI_BFIN=y
# CONFIG_SPI_BFIN_LOCK is not set
# CONFIG_SPI_BFIN_SPORT is not set
# CONFIG_SPI_BITBANG is not set
#
......@@ -830,60 +836,7 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
......@@ -894,6 +847,12 @@ CONFIG_WATCHDOG=y
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
......@@ -904,6 +863,7 @@ CONFIG_BFIN_WDT=y
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
......@@ -954,6 +914,7 @@ CONFIG_FB_BFIN_LQ035Q1=m
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
......@@ -1007,12 +968,14 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
......@@ -1233,6 +1196,13 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
#
# Tracers
#
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
......@@ -1271,6 +1241,7 @@ CONFIG_CRYPTO=y
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
......
arch/blackfin/configs/BF548-EZKIT_defconfig
浏览文件 @ 0151f94f
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.28-rc2
# Linux kernel version: 2.6.28.7
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
......@@ -36,14 +36,13 @@ CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
......@@ -56,13 +55,13 @@ CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_AIO=y
# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
......@@ -133,16 +132,21 @@ CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_BF538 is not set
# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
# CONFIG_BF547M is not set
CONFIG_BF548=y
# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
CONFIG_BF_REV_MIN=0
CONFIG_BF_REV_MAX=2
CONFIG_BF_REV_0_0=y
# CONFIG_BF_REV_0_0 is not set
# CONFIG_BF_REV_0_1 is not set
# CONFIG_BF_REV_0_2 is not set
CONFIG_BF_REV_0_2=y
# CONFIG_BF_REV_0_3 is not set
# CONFIG_BF_REV_0_4 is not set
# CONFIG_BF_REV_0_5 is not set
......@@ -348,7 +352,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
# CONFIG_BFIN_GPTIMERS is not set
CONFIG_BFIN_GPTIMERS=m
# CONFIG_DMA_UNCACHED_4M is not set
CONFIG_DMA_UNCACHED_2M=y
# CONFIG_DMA_UNCACHED_1M is not set
......@@ -413,7 +417,6 @@ CONFIG_BINFMT_ZFLAT=y
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM_WAKEUP_BY_GPIO is not set
#
# CPU Frequency scaling
......@@ -512,9 +515,9 @@ CONFIG_IRCOMM=m
#
CONFIG_IRTTY_SIR=m
CONFIG_BFIN_SIR=m
CONFIG_BFIN_SIR3=y
# CONFIG_BFIN_SIR0 is not set
# CONFIG_BFIN_SIR2 is not set
CONFIG_BFIN_SIR3=y
CONFIG_SIR_BFIN_DMA=y
# CONFIG_SIR_BFIN_PIO is not set
......@@ -538,7 +541,8 @@ CONFIG_SIR_BFIN_DMA=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
......@@ -554,7 +558,9 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
CONFIG_FW_LOADER=m
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
......@@ -668,7 +674,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
......@@ -743,6 +751,7 @@ CONFIG_SMSC911X=y
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_AX88180 is not set
CONFIG_NETDEV_10000=y
......@@ -751,8 +760,16 @@ CONFIG_NETDEV_10000=y
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_WLAN_80211=y
CONFIG_LIBERTAS=m
# CONFIG_LIBERTAS_USB is not set
CONFIG_LIBERTAS_SDIO=m
CONFIG_POWEROF2_BLOCKSIZE_ONLY=y
# CONFIG_LIBERTAS_DEBUG is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_HOSTAP is not set
#
# USB Network Adapters
......@@ -844,8 +861,8 @@ CONFIG_INPUT_MISC=y
# CONFIG_SPI_ADC_BF533 is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
# CONFIG_BFIN_SPORT is not set
CONFIG_BF5xx_PPI=m
CONFIG_BFIN_SPORT=m
# CONFIG_BFIN_TIMER_LATENCY is not set
# CONFIG_TWI_LCD is not set
CONFIG_BFIN_DMA_INTERFACE=m
......@@ -950,6 +967,7 @@ CONFIG_SPI_MASTER=y
#
CONFIG_SPI_BFIN=y
# CONFIG_SPI_BFIN_LOCK is not set
# CONFIG_SPI_BFIN_SPORT is not set
# CONFIG_SPI_BITBANG is not set
#
......@@ -962,60 +980,7 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
......@@ -1031,6 +996,12 @@ CONFIG_BFIN_WDT=y
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
......@@ -1039,8 +1010,10 @@ CONFIG_BFIN_WDT=y
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
......@@ -1092,6 +1065,7 @@ CONFIG_FB_BF54X_LQ043=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
......@@ -1243,15 +1217,15 @@ CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_SOC=y
#
# Blackfin high speed USB support
# Blackfin high speed USB Support
#
CONFIG_USB_MUSB_HOST=y
# CONFIG_USB_MUSB_PERIPHERAL is not set
# CONFIG_USB_MUSB_OTG is not set
# CONFIG_USB_GADGET_MUSB_HDRC is not set
CONFIG_USB_MUSB_HDRC_HCD=y
# CONFIG_MUSB_PIO_ONLY is not set
CONFIG_USB_INVENTRA_DMA=y
# CONFIG_USB_TI_CPPI_DMA is not set
CONFIG_MUSB_PIO_ONLY=y
CONFIG_MUSB_DMA_POLL=y
# CONFIG_USB_MUSB_DEBUG is not set
#
......@@ -1263,11 +1237,11 @@ CONFIG_USB_INVENTRA_DMA=y
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
# may also be needed; see USB_STORAGE Help for more information
# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
......@@ -1321,7 +1295,31 @@ CONFIG_USB_STORAGE=m
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
CONFIG_MMC=m
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
# CONFIG_USB_GADGET_NET2272 is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
......@@ -1337,8 +1335,9 @@ CONFIG_MMC_BLOCK_BOUNCE=y
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
CONFIG_SDH_BFIN=m
CONFIG_SDH_BFIN=y
# CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND is not set
# CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
......@@ -1373,12 +1372,14 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
......@@ -1641,6 +1642,13 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
#
# Tracers
#
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
......@@ -1680,6 +1688,7 @@ CONFIG_CRYPTO=y
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
......
arch/blackfin/configs/BF561-EZKIT_defconfig
浏览文件 @ 0151f94f
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.28-rc2
# Linux kernel version: 2.6.28.7
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
......@@ -36,14 +36,13 @@ CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
......@@ -56,13 +55,13 @@ CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_AIO=y
# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
......@@ -133,10 +132,15 @@ CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_BF538 is not set
# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
# CONFIG_BF549M is not set
CONFIG_BF561=y
# CONFIG_SMP is not set
CONFIG_BF_REV_MIN=3
......@@ -166,7 +170,6 @@ CONFIG_IRQ_SPI_ERROR=7
CONFIG_BFIN561_EZKIT=y
# CONFIG_BFIN561_TEPLA is not set
# CONFIG_BFIN561_BLUETECHNIX_CM is not set
# CONFIG_GENERIC_BF561_BOARD is not set
#
# BF561 Specific Configuration
......@@ -316,7 +319,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
# CONFIG_BFIN_GPTIMERS is not set
CONFIG_BFIN_GPTIMERS=m
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
......@@ -382,7 +385,6 @@ CONFIG_BINFMT_ZFLAT=y
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM_WAKEUP_BY_GPIO is not set
#
# CPU Frequency scaling
......@@ -612,6 +614,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
......@@ -645,6 +648,7 @@ CONFIG_SMC91X=y
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_AX88180 is not set
CONFIG_NETDEV_10000=y
......@@ -751,6 +755,7 @@ CONFIG_SPI_MASTER=y
#
CONFIG_SPI_BFIN=y
# CONFIG_SPI_BFIN_LOCK is not set
# CONFIG_SPI_BFIN_SPORT is not set
# CONFIG_SPI_BITBANG is not set
#
......@@ -763,22 +768,7 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
......@@ -789,6 +779,12 @@ CONFIG_WATCHDOG=y
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
......@@ -797,7 +793,7 @@ CONFIG_BFIN_WDT=y
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
......@@ -1041,6 +1037,13 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
#
# Tracers
#
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
......@@ -1079,6 +1082,7 @@ CONFIG_CRYPTO=y
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
......
arch/blackfin/configs/BlackStamp_defconfig
浏览文件 @ 0151f94f
......@@ -43,7 +43,7 @@ CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
......@@ -56,7 +56,7 @@ CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
......
arch/blackfin/configs/CM-BF527_defconfig
浏览文件 @ 0151f94f
......@@ -43,7 +43,7 @@ CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
......@@ -56,13 +56,13 @@ CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_AIO=y
# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
......
arch/blackfin/configs/CM-BF533_defconfig
浏览文件 @ 0151f94f
......@@ -46,7 +46,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
CONFIG_SYSCTL_SYSCALL=y
......@@ -57,7 +57,7 @@ CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
......
arch/blackfin/configs/CM-BF537E_defconfig
浏览文件 @ 0151f94f
......@@ -46,7 +46,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
CONFIG_SYSCTL_SYSCALL=y
......@@ -57,7 +57,7 @@ CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
......
arch/blackfin/configs/CM-BF537U_defconfig
浏览文件 @ 0151f94f
......@@ -46,7 +46,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
CONFIG_SYSCTL_SYSCALL=y
......@@ -57,7 +57,7 @@ CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
......
arch/blackfin/configs/CM-BF548_defconfig
浏览文件 @ 0151f94f
......@@ -46,7 +46,7 @@ CONFIG_FAIR_USER_SCHED=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
......@@ -57,7 +57,7 @@ CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
......
arch/blackfin/configs/CM-BF561_defconfig
浏览文件 @ 0151f94f
......@@ -46,7 +46,7 @@ CONFIG_FAIR_USER_SCHED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
CONFIG_SYSCTL_SYSCALL=y
......@@ -57,7 +57,7 @@ CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
......
arch/blackfin/configs/H8606_defconfig
浏览文件 @ 0151f94f
......@@ -45,7 +45,7 @@ CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
......@@ -56,7 +56,7 @@ CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
......
arch/blackfin/configs/IP0X_defconfig
浏览文件 @ 0151f94f
......@@ -46,7 +46,7 @@ CONFIG_SYSFS_DEPRECATED=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
......@@ -57,7 +57,7 @@ CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
......
arch/blackfin/configs/PNAV-10_defconfig
浏览文件 @ 0151f94f
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.28-rc2
# Linux kernel version: 2.6.28.7
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
......@@ -35,13 +35,12 @@ CONFIG_SYSVIPC_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
......@@ -53,13 +52,13 @@ CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_AIO=y
# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
......@@ -130,10 +129,15 @@ CONFIG_BF537=y
# CONFIG_BF538 is not set
# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
CONFIG_BF_REV_MIN=2
CONFIG_BF_REV_MAX=3
......@@ -180,7 +184,6 @@ CONFIG_IRQ_SPI=10
# CONFIG_BFIN537_BLUETECHNIX_TCM is not set
CONFIG_PNAV10=y
# CONFIG_CAMSIG_MINOTAUR is not set
# CONFIG_GENERIC_BF537_BOARD is not set
#
# BF537 Specific Configuration
......@@ -341,7 +344,6 @@ CONFIG_BINFMT_ZFLAT=y
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM_WAKEUP_BY_GPIO is not set
#
# CPU Frequency scaling
......@@ -538,7 +540,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
......@@ -593,6 +597,7 @@ CONFIG_BFIN_MAC_RMII=y
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_AX88180 is not set
CONFIG_NETDEV_10000=y
......@@ -776,6 +781,7 @@ CONFIG_SPI_MASTER=y
#
CONFIG_SPI_BFIN=y
# CONFIG_SPI_BFIN_LOCK is not set
# CONFIG_SPI_BFIN_SPORT is not set
# CONFIG_SPI_BITBANG is not set
#
......@@ -799,6 +805,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
......@@ -845,6 +852,12 @@ CONFIG_HWMON=y
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
......@@ -853,8 +866,10 @@ CONFIG_HWMON=y
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
......@@ -910,6 +925,7 @@ CONFIG_FB_BFIN_LANDSCAPE=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_LTV350QV is not set
......@@ -966,7 +982,7 @@ CONFIG_USB_ARCH_HAS_HCD=y
#
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
......@@ -1003,12 +1019,14 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
......@@ -1196,6 +1214,10 @@ CONFIG_FRAME_WARN=1024
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
#
# Tracers
#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
......@@ -1230,6 +1252,7 @@ CONFIG_CRYPTO=y
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
......
arch/blackfin/configs/SRV1_defconfig
浏览文件 @ 0151f94f
......@@ -49,7 +49,7 @@ CONFIG_SYSFS_DEPRECATED=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
......@@ -61,7 +61,7 @@ CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
......
arch/blackfin/configs/TCM-BF537_defconfig
浏览文件 @ 0151f94f
......@@ -39,7 +39,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
CONFIG_SYSCTL_SYSCALL=y
......@@ -51,13 +51,13 @@ CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_AIO=y
# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
......
arch/blackfin/include/asm/bfin5xx_spi.h
浏览文件 @ 0151f94f
......@@ -110,7 +110,7 @@
struct bfin5xx_spi_master {
u16 num_chipselect;
u8 enable_dma;
u16 pin_req[4];
u16 pin_req[7];
};
/* spi_board_info.controller_data for SPI slave devices,
......
arch/blackfin/include/asm/bfin_sport.h
浏览文件 @ 0151f94f
......@@ -9,6 +9,13 @@
#ifndef __BFIN_SPORT_H__
#define __BFIN_SPORT_H__
#ifdef __KERNEL__
#include <linux/cdev.h>
#include <linux/mutex.h>
#include <linux/sched.h>
#include <linux/wait.h>
#endif
#define SPORT_MAJOR 237
#define SPORT_NR_DEVS 2
......@@ -119,7 +126,7 @@ struct sport_dev {
int tx_len;
int tx_sent;
int sport_err_irq;
int err_irq;
struct mutex mutex; /* mutual exclusion semaphore */
struct task_struct *task;
......
arch/blackfin/include/asm/gpio.h
浏览文件 @ 0151f94f
......@@ -110,7 +110,7 @@
* MODIFICATION HISTORY :
**************************************************************/
#ifndef BF548_FAMILY
#ifndef CONFIG_BF54x
void set_gpio_dir(unsigned, unsigned short);
void set_gpio_inen(unsigned, unsigned short);
void set_gpio_polar(unsigned, unsigned short);
......@@ -303,7 +303,10 @@ static inline void gpio_set_value(unsigned gpio, int value)
static inline int gpio_to_irq(unsigned gpio)
{
return (gpio + GPIO_IRQ_BASE);
if (likely(gpio < MAX_BLACKFIN_GPIOS))
return gpio + GPIO_IRQ_BASE;
return -EINVAL;
}
static inline int irq_to_gpio(unsigned irq)
......
arch/blackfin/include/asm/gptimers.h
浏览文件 @ 0151f94f
......@@ -15,16 +15,16 @@
#include <asm/blackfin.h>
/*
* BF537/BF527: 8 timers:
* BF51x/BF52x/BF537: 8 timers:
*/
#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
#if defined(CONFIG_BF51x) || defined(CONFIG_BF52x) || defined(BF537_FAMILY)
# define MAX_BLACKFIN_GPTIMERS 8
# define TIMER0_GROUP_REG TIMER_ENABLE
#endif
/*
* BF54x: 11 timers (BF542: 8 timers):
*/
#if defined(BF548_FAMILY)
#if defined(CONFIG_BF54x)
# ifdef CONFIG_BF542
# define MAX_BLACKFIN_GPTIMERS 8
# else
......
arch/blackfin/kernel/bfin_gpio.c
浏览文件 @ 0151f94f
......@@ -69,7 +69,7 @@ enum {
static struct gpio_port_t * const gpio_array[] = {
#if defined(BF533_FAMILY) || defined(BF538_FAMILY)
(struct gpio_port_t *) FIO_FLAG_D,
#elif defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
#elif defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
(struct gpio_port_t *) PORTFIO,
(struct gpio_port_t *) PORTGIO,
(struct gpio_port_t *) PORTHIO,
......@@ -77,7 +77,7 @@ static struct gpio_port_t * const gpio_array[] = {
(struct gpio_port_t *) FIO0_FLAG_D,
(struct gpio_port_t *) FIO1_FLAG_D,
(struct gpio_port_t *) FIO2_FLAG_D,
#elif defined(BF548_FAMILY)
#elif defined(CONFIG_BF54x)
(struct gpio_port_t *)PORTA_FER,
(struct gpio_port_t *)PORTB_FER,
(struct gpio_port_t *)PORTC_FER,
......@@ -93,7 +93,7 @@ static struct gpio_port_t * const gpio_array[] = {
#endif
};
#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
static unsigned short * const port_fer[] = {
(unsigned short *) PORTF_FER,
(unsigned short *) PORTG_FER,
......@@ -109,11 +109,11 @@ static unsigned short * const port_mux[] = {
static const
u8 pmux_offset[][16] = {
# if defined(BF527_FAMILY)
# if defined(CONFIG_BF52x)
{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */
{ 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */
{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */
# elif defined(BF518_FAMILY)
# elif defined(CONFIG_BF51x)
{ 0, 2, 2, 2, 2, 2, 2, 4, 6, 6, 6, 8, 8, 8, 8, 10 }, /* PORTF */
{ 0, 0, 0, 2, 4, 6, 6, 6, 8, 10, 10, 12, 14, 14, 14, 14 }, /* PORTG */
{ 0, 0, 0, 0, 2, 2, 4, 6, 10, 10, 10, 10, 10, 10, 10, 10 }, /* PORTH */
......@@ -139,7 +139,7 @@ static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM];
inline int check_gpio(unsigned gpio)
{
#if defined(BF548_FAMILY)
#if defined(CONFIG_BF54x)
if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15
|| gpio == GPIO_PH14 || gpio == GPIO_PH15
|| gpio == GPIO_PJ14 || gpio == GPIO_PJ15)
......@@ -187,13 +187,13 @@ static void port_setup(unsigned gpio, unsigned short usage)
if (check_gpio(gpio))
return;
#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
if (usage == GPIO_USAGE)
*port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
else
*port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
SSYNC();
#elif defined(BF548_FAMILY)
#elif defined(CONFIG_BF54x)
if (usage == GPIO_USAGE)
gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio);
else
......@@ -273,7 +273,7 @@ static void portmux_setup(unsigned short per)
}
}
}
#elif defined(BF548_FAMILY)
#elif defined(CONFIG_BF54x)
inline void portmux_setup(unsigned short per)
{
u32 pmux;
......@@ -297,7 +297,7 @@ inline u16 get_portmux(unsigned short per)
return (pmux >> (2 * gpio_sub_n(ident)) & 0x3);
}
#elif defined(BF527_FAMILY) || defined(BF518_FAMILY)
#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
inline void portmux_setup(unsigned short per)
{
u16 pmux, ident = P_IDENT(per), function = P_FUNCT2MUX(per);
......@@ -322,7 +322,7 @@ static int __init bfin_gpio_init(void)
arch_initcall(bfin_gpio_init);
#ifndef BF548_FAMILY
#ifndef CONFIG_BF54x
/***********************************************************
*
* FUNCTIONS: Blackfin General Purpose Ports Access Functions
......@@ -489,7 +489,7 @@ static const unsigned int sic_iwr_irqs[] = {
IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX
#elif defined(BF538_FAMILY)
IRQ_PORTF_INTB
#elif defined(BF527_FAMILY) || defined(BF518_FAMILY)
#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB
#elif defined(BF561_FAMILY)
IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB
......@@ -586,7 +586,7 @@ u32 bfin_pm_standby_setup(void)
gpio_array[bank]->maskb = 0;
if (mask) {
#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
gpio_bank_saved[bank].fer = *port_fer[bank];
#endif
gpio_bank_saved[bank].inen = gpio_array[bank]->inen;
......@@ -631,7 +631,7 @@ void bfin_pm_standby_restore(void)
bank = gpio_bank(i);
if (mask) {
#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
*port_fer[bank] = gpio_bank_saved[bank].fer;
#endif
gpio_array[bank]->inen = gpio_bank_saved[bank].inen;
......@@ -657,9 +657,9 @@ void bfin_gpio_pm_hibernate_suspend(void)
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
bank = gpio_bank(i);
#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
gpio_bank_saved[bank].fer = *port_fer[bank];
#if defined(BF527_FAMILY) || defined(BF518_FAMILY)
#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
gpio_bank_saved[bank].mux = *port_mux[bank];
#else
if (bank == 0)
......@@ -685,8 +685,8 @@ void bfin_gpio_pm_hibernate_restore(void)
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
bank = gpio_bank(i);
#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
#if defined(BF527_FAMILY) || defined(BF518_FAMILY)
#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
*port_mux[bank] = gpio_bank_saved[bank].mux;
#else
if (bank == 0)
......@@ -710,7 +710,7 @@ void bfin_gpio_pm_hibernate_restore(void)
#endif
#else /* BF548_FAMILY */
#else /* CONFIG_BF54x */
#ifdef CONFIG_PM
u32 bfin_pm_standby_setup(void)
......@@ -762,7 +762,7 @@ unsigned short get_gpio_dir(unsigned gpio)
}
EXPORT_SYMBOL(get_gpio_dir);
#endif /* BF548_FAMILY */
#endif /* CONFIG_BF54x */
/***********************************************************
*
......@@ -802,7 +802,8 @@ int peripheral_request(unsigned short per, const char *label)
*/
if (unlikely(!check_gpio(ident) &&
reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) {
dump_stack();
if (system_state == SYSTEM_BOOTING)
dump_stack();
printk(KERN_ERR
"%s: Peripheral %d is already reserved as GPIO by %s !\n",
__func__, ident, get_label(ident));
......@@ -817,7 +818,7 @@ int peripheral_request(unsigned short per, const char *label)
* be requested and used by several drivers
*/
#ifdef BF548_FAMILY
#ifdef CONFIG_BF54x
if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) {
#else
if (!(per & P_MAYSHARE)) {
......@@ -830,7 +831,8 @@ int peripheral_request(unsigned short per, const char *label)
if (cmp_label(ident, label) == 0)
goto anyway;
dump_stack();
if (system_state == SYSTEM_BOOTING)
dump_stack();
printk(KERN_ERR
"%s: Peripheral %d function %d is already reserved by %s !\n",
__func__, ident, P_FUNCT2MUX(per), get_label(ident));
......@@ -946,14 +948,16 @@ int bfin_gpio_request(unsigned gpio, const char *label)
}
if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
dump_stack();
if (system_state == SYSTEM_BOOTING)
dump_stack();
printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n",
gpio, get_label(gpio));
local_irq_restore_hw(flags);
return -EBUSY;
}
if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
dump_stack();
if (system_state == SYSTEM_BOOTING)
dump_stack();
printk(KERN_ERR
"bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
gpio, get_label(gpio));
......@@ -964,7 +968,7 @@ int bfin_gpio_request(unsigned gpio, const char *label)
printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!"
" (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio);
}
#ifndef BF548_FAMILY
#ifndef CONFIG_BF54x
else { /* Reset POLAR setting when acquiring a gpio for the first time */
set_gpio_polar(gpio, 0);
}
......@@ -993,7 +997,8 @@ void bfin_gpio_free(unsigned gpio)
local_irq_save_hw(flags);
if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
dump_stack();
if (system_state == SYSTEM_BOOTING)
dump_stack();
gpio_error(gpio);
local_irq_restore_hw(flags);
return;
......@@ -1017,7 +1022,8 @@ int bfin_gpio_irq_request(unsigned gpio, const char *label)
local_irq_save_hw(flags);
if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
dump_stack();
if (system_state == SYSTEM_BOOTING)
dump_stack();
printk(KERN_ERR
"bfin-gpio: GPIO %d is already reserved as gpio-irq !\n",
gpio);
......@@ -1025,7 +1031,8 @@ int bfin_gpio_irq_request(unsigned gpio, const char *label)
return -EBUSY;
}
if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
dump_stack();
if (system_state == SYSTEM_BOOTING)
dump_stack();
printk(KERN_ERR
"bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
gpio, get_label(gpio));
......@@ -1057,7 +1064,8 @@ void bfin_gpio_irq_free(unsigned gpio)
local_irq_save_hw(flags);
if (unlikely(!(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
dump_stack();
if (system_state == SYSTEM_BOOTING)
dump_stack();
gpio_error(gpio);
local_irq_restore_hw(flags);
return;
......@@ -1072,7 +1080,7 @@ void bfin_gpio_irq_free(unsigned gpio)
static inline void __bfin_gpio_direction_input(unsigned gpio)
{
#ifdef BF548_FAMILY
#ifdef CONFIG_BF54x
gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio);
#else
gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
......@@ -1100,13 +1108,13 @@ EXPORT_SYMBOL(bfin_gpio_direction_input);
void bfin_gpio_irq_prepare(unsigned gpio)
{
#ifdef BF548_FAMILY
#ifdef CONFIG_BF54x
unsigned long flags;
#endif
port_setup(gpio, GPIO_USAGE);
#ifdef BF548_FAMILY
#ifdef CONFIG_BF54x
local_irq_save_hw(flags);
__bfin_gpio_direction_input(gpio);
local_irq_restore_hw(flags);
......@@ -1135,7 +1143,7 @@ int bfin_gpio_direction_output(unsigned gpio, int value)
gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
gpio_set_value(gpio, value);
#ifdef BF548_FAMILY
#ifdef CONFIG_BF54x
gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio);
#else
gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
......@@ -1150,7 +1158,7 @@ EXPORT_SYMBOL(bfin_gpio_direction_output);
int bfin_gpio_get_value(unsigned gpio)
{
#ifdef BF548_FAMILY
#ifdef CONFIG_BF54x
return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio)));
#else
unsigned long flags;
......
arch/blackfin/kernel/vmlinux.lds.S
浏览文件 @ 0151f94f
......@@ -183,6 +183,7 @@ SECTIONS
. = ALIGN(4);
__etext_l1 = .;
}
ASSERT (SIZEOF(.text_l1) <= L1_CODE_LENGTH, "L1 text overflow!")
.data_l1 L1_DATA_A_START : AT(LOADADDR(.text_l1) + SIZEOF(.text_l1))
{
......@@ -200,6 +201,7 @@ SECTIONS
. = ALIGN(4);
__ebss_l1 = .;
}
ASSERT (SIZEOF(.data_a_l1) <= L1_DATA_A_LENGTH, "L1 data A overflow!")
.data_b_l1 L1_DATA_B_START : AT(LOADADDR(.data_l1) + SIZEOF(.data_l1))
{
......@@ -214,6 +216,7 @@ SECTIONS
. = ALIGN(4);
__ebss_b_l1 = .;
}
ASSERT (SIZEOF(.data_b_l1) <= L1_DATA_B_LENGTH, "L1 data B overflow!")
__l2_lma_start = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1);
......@@ -239,6 +242,7 @@ SECTIONS
. = ALIGN(4);
__ebss_l2 = .;
}
ASSERT (SIZEOF(.text_data_l1) <= L2_LENGTH, "L2 overflow!")
/* Force trailing alignment of our init section so that when we
* free our init memory, we don't leave behind a partial page.
......
arch/blackfin/mach-bf518/include/mach/blackfin.h
浏览文件 @ 0151f94f
......@@ -32,8 +32,6 @@
#ifndef _MACH_BLACKFIN_H_
#define _MACH_BLACKFIN_H_
#define BF518_FAMILY
#include "bf518.h"
#include "mem_map.h"
#include "defBF512.h"
......
arch/blackfin/mach-bf518/include/mach/cdefBF514.h
浏览文件 @ 0151f94f
......@@ -45,4 +45,71 @@
/* The following are the #defines needed by ADSP-BF514 that are not in the common header */
/* Removable Storage Interface Registers */
#define bfin_read_RSI_PWR_CTL() bfin_read16(RSI_PWR_CONTROL)
#define bfin_write_RSI_PWR_CTL(val) bfin_write16(RSI_PWR_CONTROL, val)
#define bfin_read_RSI_CLK_CTL() bfin_read16(RSI_CLK_CONTROL)
#define bfin_write_RSI_CLK_CTL(val) bfin_write16(RSI_CLK_CONTROL, val)
#define bfin_read_RSI_ARGUMENT() bfin_read32(RSI_ARGUMENT)
#define bfin_write_RSI_ARGUMENT(val) bfin_write32(RSI_ARGUMENT, val)
#define bfin_read_RSI_COMMAND() bfin_read16(RSI_COMMAND)
#define bfin_write_RSI_COMMAND(val) bfin_write16(RSI_COMMAND, val)
#define bfin_read_RSI_RESP_CMD() bfin_read16(RSI_RESP_CMD)
#define bfin_write_RSI_RESP_CMD(val) bfin_write16(RSI_RESP_CMD, val)
#define bfin_read_RSI_RESPONSE0() bfin_read32(RSI_RESPONSE0)
#define bfin_write_RSI_RESPONSE0(val) bfin_write32(RSI_RESPONSE0, val)
#define bfin_read_RSI_RESPONSE1() bfin_read32(RSI_RESPONSE1)
#define bfin_write_RSI_RESPONSE1(val) bfin_write32(RSI_RESPONSE1, val)
#define bfin_read_RSI_RESPONSE2() bfin_read32(RSI_RESPONSE2)
#define bfin_write_RSI_RESPONSE2(val) bfin_write32(RSI_RESPONSE2, val)
#define bfin_read_RSI_RESPONSE3() bfin_read32(RSI_RESPONSE3)
#define bfin_write_RSI_RESPONSE3(val) bfin_write32(RSI_RESPONSE3, val)
#define bfin_read_RSI_DATA_TIMER() bfin_read32(RSI_DATA_TIMER)
#define bfin_write_RSI_DATA_TIMER(val) bfin_write32(RSI_DATA_TIMER, val)
#define bfin_read_RSI_DATA_LGTH() bfin_read16(RSI_DATA_LGTH)
#define bfin_write_RSI_DATA_LGTH(val) bfin_write16(RSI_DATA_LGTH, val)
#define bfin_read_RSI_DATA_CTL() bfin_read16(RSI_DATA_CONTROL)
#define bfin_write_RSI_DATA_CTL(val) bfin_write16(RSI_DATA_CONTROL, val)
#define bfin_read_RSI_DATA_CNT() bfin_read16(RSI_DATA_CNT)
#define bfin_write_RSI_DATA_CNT(val) bfin_write16(RSI_DATA_CNT, val)
#define bfin_read_RSI_STATUS() bfin_read32(RSI_STATUS)
#define bfin_write_RSI_STATUS(val) bfin_write32(RSI_STATUS, val)
#define bfin_read_RSI_STATUS_CLR() bfin_read16(RSI_STATUSCL)
#define bfin_write_RSI_STATUS_CLR(val) bfin_write16(RSI_STATUSCL, val)
#define bfin_read_RSI_MASK0() bfin_read32(RSI_MASK0)
#define bfin_write_RSI_MASK0(val) bfin_write32(RSI_MASK0, val)
#define bfin_read_RSI_MASK1() bfin_read32(RSI_MASK1)
#define bfin_write_RSI_MASK1(val) bfin_write32(RSI_MASK1, val)
#define bfin_read_RSI_FIFO_CNT() bfin_read16(RSI_FIFO_CNT)
#define bfin_write_RSI_FIFO_CNT(val) bfin_write16(RSI_FIFO_CNT, val)
#define bfin_read_RSI_CEATA_CTL() bfin_read16(RSI_CEATA_CONTROL)
#define bfin_write_RSI_CEATA_CTL(val) bfin_write16(RSI_CEATA_CONTROL, val)
#define bfin_read_RSI_FIFO() bfin_read32(RSI_FIFO)
#define bfin_write_RSI_FIFO(val) bfin_write32(RSI_FIFO, val)
#define bfin_read_RSI_E_STATUS() bfin_read16(RSI_ESTAT)
#define bfin_write_RSI_E_STATUS(val) bfin_write16(RSI_ESTAT, val)
#define bfin_read_RSI_E_MASK() bfin_read16(RSI_EMASK)
#define bfin_write_RSI_E_MASK(val) bfin_write16(RSI_EMASK, val)
#define bfin_read_RSI_CFG() bfin_read16(RSI_CONFIG)
#define bfin_write_RSI_CFG(val) bfin_write16(RSI_CONFIG, val)
#define bfin_read_RSI_RD_WAIT_EN() bfin_read16(RSI_RD_WAIT_EN)
#define bfin_write_RSI_RD_WAIT_EN(val) bfin_write16(RSI_RD_WAIT_EN, val)
#define bfin_read_RSI_PID0() bfin_read16(RSI_PID0)
#define bfin_write_RSI_PID0(val) bfin_write16(RSI_PID0, val)
#define bfin_read_RSI_PID1() bfin_read16(RSI_PID1)
#define bfin_write_RSI_PID1(val) bfin_write16(RSI_PID1, val)
#define bfin_read_RSI_PID2() bfin_read16(RSI_PID2)
#define bfin_write_RSI_PID2(val) bfin_write16(RSI_PID2, val)
#define bfin_read_RSI_PID3() bfin_read16(RSI_PID3)
#define bfin_write_RSI_PID3(val) bfin_write16(RSI_PID3, val)
#define bfin_read_RSI_PID4() bfin_read16(RSI_PID4)
#define bfin_write_RSI_PID4(val) bfin_write16(RSI_PID4, val)
#define bfin_read_RSI_PID5() bfin_read16(RSI_PID5)
#define bfin_write_RSI_PID5(val) bfin_write16(RSI_PID5, val)
#define bfin_read_RSI_PID6() bfin_read16(RSI_PID6)
#define bfin_write_RSI_PID6(val) bfin_write16(RSI_PID6, val)
#define bfin_read_RSI_PID7() bfin_read16(RSI_PID7)
#define bfin_write_RSI_PID7(val) bfin_write16(RSI_PID7, val)
#endif /* _CDEF_BF514_H */
arch/blackfin/mach-bf518/include/mach/cdefBF516.h
浏览文件 @ 0151f94f
......@@ -210,4 +210,71 @@
#define bfin_read_EMAC_TXC_ABORT() bfin_read32(EMAC_TXC_ABORT)
#define bfin_write_EMAC_TXC_ABORT(val) bfin_write32(EMAC_TXC_ABORT, val)
/* Removable Storage Interface Registers */
#define bfin_read_RSI_PWR_CTL() bfin_read16(RSI_PWR_CONTROL)
#define bfin_write_RSI_PWR_CTL(val) bfin_write16(RSI_PWR_CONTROL, val)
#define bfin_read_RSI_CLK_CTL() bfin_read16(RSI_CLK_CONTROL)
#define bfin_write_RSI_CLK_CTL(val) bfin_write16(RSI_CLK_CONTROL, val)
#define bfin_read_RSI_ARGUMENT() bfin_read32(RSI_ARGUMENT)
#define bfin_write_RSI_ARGUMENT(val) bfin_write32(RSI_ARGUMENT, val)
#define bfin_read_RSI_COMMAND() bfin_read16(RSI_COMMAND)
#define bfin_write_RSI_COMMAND(val) bfin_write16(RSI_COMMAND, val)
#define bfin_read_RSI_RESP_CMD() bfin_read16(RSI_RESP_CMD)
#define bfin_write_RSI_RESP_CMD(val) bfin_write16(RSI_RESP_CMD, val)
#define bfin_read_RSI_RESPONSE0() bfin_read32(RSI_RESPONSE0)
#define bfin_write_RSI_RESPONSE0(val) bfin_write32(RSI_RESPONSE0, val)
#define bfin_read_RSI_RESPONSE1() bfin_read32(RSI_RESPONSE1)
#define bfin_write_RSI_RESPONSE1(val) bfin_write32(RSI_RESPONSE1, val)
#define bfin_read_RSI_RESPONSE2() bfin_read32(RSI_RESPONSE2)
#define bfin_write_RSI_RESPONSE2(val) bfin_write32(RSI_RESPONSE2, val)
#define bfin_read_RSI_RESPONSE3() bfin_read32(RSI_RESPONSE3)
#define bfin_write_RSI_RESPONSE3(val) bfin_write32(RSI_RESPONSE3, val)
#define bfin_read_RSI_DATA_TIMER() bfin_read32(RSI_DATA_TIMER)
#define bfin_write_RSI_DATA_TIMER(val) bfin_write32(RSI_DATA_TIMER, val)
#define bfin_read_RSI_DATA_LGTH() bfin_read16(RSI_DATA_LGTH)
#define bfin_write_RSI_DATA_LGTH(val) bfin_write16(RSI_DATA_LGTH, val)
#define bfin_read_RSI_DATA_CTL() bfin_read16(RSI_DATA_CONTROL)
#define bfin_write_RSI_DATA_CTL(val) bfin_write16(RSI_DATA_CONTROL, val)
#define bfin_read_RSI_DATA_CNT() bfin_read16(RSI_DATA_CNT)
#define bfin_write_RSI_DATA_CNT(val) bfin_write16(RSI_DATA_CNT, val)
#define bfin_read_RSI_STATUS() bfin_read32(RSI_STATUS)
#define bfin_write_RSI_STATUS(val) bfin_write32(RSI_STATUS, val)
#define bfin_read_RSI_STATUS_CLR() bfin_read16(RSI_STATUSCL)
#define bfin_write_RSI_STATUS_CLR(val) bfin_write16(RSI_STATUSCL, val)
#define bfin_read_RSI_MASK0() bfin_read32(RSI_MASK0)
#define bfin_write_RSI_MASK0(val) bfin_write32(RSI_MASK0, val)
#define bfin_read_RSI_MASK1() bfin_read32(RSI_MASK1)
#define bfin_write_RSI_MASK1(val) bfin_write32(RSI_MASK1, val)
#define bfin_read_RSI_FIFO_CNT() bfin_read16(RSI_FIFO_CNT)
#define bfin_write_RSI_FIFO_CNT(val) bfin_write16(RSI_FIFO_CNT, val)
#define bfin_read_RSI_CEATA_CTL() bfin_read16(RSI_CEATA_CONTROL)
#define bfin_write_RSI_CEATA_CTL(val) bfin_write16(RSI_CEATA_CONTROL, val)
#define bfin_read_RSI_FIFO() bfin_read32(RSI_FIFO)
#define bfin_write_RSI_FIFO(val) bfin_write32(RSI_FIFO, val)
#define bfin_read_RSI_E_STATUS() bfin_read16(RSI_ESTAT)
#define bfin_write_RSI_E_STATUS(val) bfin_write16(RSI_ESTAT, val)
#define bfin_read_RSI_E_MASK() bfin_read16(RSI_EMASK)
#define bfin_write_RSI_E_MASK(val) bfin_write16(RSI_EMASK, val)
#define bfin_read_RSI_CFG() bfin_read16(RSI_CONFIG)
#define bfin_write_RSI_CFG(val) bfin_write16(RSI_CONFIG, val)
#define bfin_read_RSI_RD_WAIT_EN() bfin_read16(RSI_RD_WAIT_EN)
#define bfin_write_RSI_RD_WAIT_EN(val) bfin_write16(RSI_RD_WAIT_EN, val)
#define bfin_read_RSI_PID0() bfin_read16(RSI_PID0)
#define bfin_write_RSI_PID0(val) bfin_write16(RSI_PID0, val)
#define bfin_read_RSI_PID1() bfin_read16(RSI_PID1)
#define bfin_write_RSI_PID1(val) bfin_write16(RSI_PID1, val)
#define bfin_read_RSI_PID2() bfin_read16(RSI_PID2)
#define bfin_write_RSI_PID2(val) bfin_write16(RSI_PID2, val)
#define bfin_read_RSI_PID3() bfin_read16(RSI_PID3)
#define bfin_write_RSI_PID3(val) bfin_write16(RSI_PID3, val)
#define bfin_read_RSI_PID4() bfin_read16(RSI_PID4)
#define bfin_write_RSI_PID4(val) bfin_write16(RSI_PID4, val)
#define bfin_read_RSI_PID5() bfin_read16(RSI_PID5)
#define bfin_write_RSI_PID5(val) bfin_write16(RSI_PID5, val)
#define bfin_read_RSI_PID6() bfin_read16(RSI_PID6)
#define bfin_write_RSI_PID6(val) bfin_write16(RSI_PID6, val)
#define bfin_read_RSI_PID7() bfin_read16(RSI_PID7)
#define bfin_write_RSI_PID7(val) bfin_write16(RSI_PID7, val)
#endif /* _CDEF_BF516_H */
arch/blackfin/mach-bf518/include/mach/defBF514.h
浏览文件 @ 0151f94f
......@@ -110,4 +110,139 @@
#define RSI_PID6 0xFFC03FF8 /* RSI Peripheral ID Register 6 */
#define RSI_PID7 0xFFC03FFC /* RSI Peripheral ID Register 7 */
/* ********************************************************** */
/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
/* and MULTI BIT READ MACROS */
/* ********************************************************** */
/* Bit masks for SDH_COMMAND */
#define CMD_IDX 0x3f /* Command Index */
#define CMD_RSP 0x40 /* Response */
#define CMD_L_RSP 0x80 /* Long Response */
#define CMD_INT_E 0x100 /* Command Interrupt */
#define CMD_PEND_E 0x200 /* Command Pending */
#define CMD_E 0x400 /* Command Enable */
/* Bit masks for SDH_PWR_CTL */
#define PWR_ON 0x3 /* Power On */
#if 0
#define TBD 0x3c /* TBD */
#endif
#define SD_CMD_OD 0x40 /* Open Drain Output */
#define ROD_CTL 0x80 /* Rod Control */
/* Bit masks for SDH_CLK_CTL */
#define CLKDIV 0xff /* MC_CLK Divisor */
#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */
#define PWR_SV_E 0x200 /* Power Save Enable */
#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */
#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */
/* Bit masks for SDH_RESP_CMD */
#define RESP_CMD 0x3f /* Response Command */
/* Bit masks for SDH_DATA_CTL */
#define DTX_E 0x1 /* Data Transfer Enable */
#define DTX_DIR 0x2 /* Data Transfer Direction */
#define DTX_MODE 0x4 /* Data Transfer Mode */
#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */
#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */
/* Bit masks for SDH_STATUS */
#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */
#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */
#define CMD_TIME_OUT 0x4 /* CMD Time Out */
#define DAT_TIME_OUT 0x8 /* Data Time Out */
#define TX_UNDERRUN 0x10 /* Transmit Underrun */
#define RX_OVERRUN 0x20 /* Receive Overrun */
#define CMD_RESP_END 0x40 /* CMD Response End */
#define CMD_SENT 0x80 /* CMD Sent */
#define DAT_END 0x100 /* Data End */
#define START_BIT_ERR 0x200 /* Start Bit Error */
#define DAT_BLK_END 0x400 /* Data Block End */
#define CMD_ACT 0x800 /* CMD Active */
#define TX_ACT 0x1000 /* Transmit Active */
#define RX_ACT 0x2000 /* Receive Active */
#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */
#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */
#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */
#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */
#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */
#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */
#define TX_DAT_RDY 0x100000 /* Transmit Data Available */
#define RX_FIFO_RDY 0x200000 /* Receive Data Available */
/* Bit masks for SDH_STATUS_CLR */
#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */
#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */
#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */
#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */
#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */
#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */
#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */
#define CMD_SENT_STAT 0x80 /* CMD Sent Status */
#define DAT_END_STAT 0x100 /* Data End Status */
#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */
#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */
/* Bit masks for SDH_MASK0 */
#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */
#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */
#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */
#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */
#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */
#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */
#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */
#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */
#define DAT_END_MASK 0x100 /* Data End Mask */
#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */
#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */
#define CMD_ACT_MASK 0x800 /* CMD Active Mask */
#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */
#define RX_ACT_MASK 0x2000 /* Receive Active Mask */
#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */
#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */
#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */
#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */
#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */
#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */
#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */
#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */
/* Bit masks for SDH_FIFO_CNT */
#define FIFO_COUNT 0x7fff /* FIFO Count */
/* Bit masks for SDH_E_STATUS */
#define SDIO_INT_DET 0x2 /* SDIO Int Detected */
#define SD_CARD_DET 0x10 /* SD Card Detect */
/* Bit masks for SDH_E_MASK */
#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */
#define SCD_MSK 0x40 /* Mask Card Detect */
/* Bit masks for SDH_CFG */
#define CLKS_EN 0x1 /* Clocks Enable */
#define SD4E 0x4 /* SDIO 4-Bit Enable */
#define MWE 0x8 /* Moving Window Enable */
#define SD_RST 0x10 /* SDMMC Reset */
#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */
#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */
#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */
/* Bit masks for SDH_RD_WAIT_EN */
#define RWR 0x1 /* Read Wait Request */
#endif /* _DEF_BF514_H */
arch/blackfin/mach-bf518/include/mach/defBF516.h
浏览文件 @ 0151f94f
......@@ -487,4 +487,139 @@
#define RSI_PID6 0xFFC03FF8 /* RSI Peripheral ID Register 6 */
#define RSI_PID7 0xFFC03FFC /* RSI Peripheral ID Register 7 */
/* ********************************************************** */
/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
/* and MULTI BIT READ MACROS */
/* ********************************************************** */
/* Bit masks for SDH_COMMAND */
#define CMD_IDX 0x3f /* Command Index */
#define CMD_RSP 0x40 /* Response */
#define CMD_L_RSP 0x80 /* Long Response */
#define CMD_INT_E 0x100 /* Command Interrupt */
#define CMD_PEND_E 0x200 /* Command Pending */
#define CMD_E 0x400 /* Command Enable */
/* Bit masks for SDH_PWR_CTL */
#define PWR_ON 0x3 /* Power On */
#if 0
#define TBD 0x3c /* TBD */
#endif
#define SD_CMD_OD 0x40 /* Open Drain Output */
#define ROD_CTL 0x80 /* Rod Control */
/* Bit masks for SDH_CLK_CTL */
#define CLKDIV 0xff /* MC_CLK Divisor */
#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */
#define PWR_SV_E 0x200 /* Power Save Enable */
#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */
#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */
/* Bit masks for SDH_RESP_CMD */
#define RESP_CMD 0x3f /* Response Command */
/* Bit masks for SDH_DATA_CTL */
#define DTX_E 0x1 /* Data Transfer Enable */
#define DTX_DIR 0x2 /* Data Transfer Direction */
#define DTX_MODE 0x4 /* Data Transfer Mode */
#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */
#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */
/* Bit masks for SDH_STATUS */
#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */
#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */
#define CMD_TIME_OUT 0x4 /* CMD Time Out */
#define DAT_TIME_OUT 0x8 /* Data Time Out */
#define TX_UNDERRUN 0x10 /* Transmit Underrun */
#define RX_OVERRUN 0x20 /* Receive Overrun */
#define CMD_RESP_END 0x40 /* CMD Response End */
#define CMD_SENT 0x80 /* CMD Sent */
#define DAT_END 0x100 /* Data End */
#define START_BIT_ERR 0x200 /* Start Bit Error */
#define DAT_BLK_END 0x400 /* Data Block End */
#define CMD_ACT 0x800 /* CMD Active */
#define TX_ACT 0x1000 /* Transmit Active */
#define RX_ACT 0x2000 /* Receive Active */
#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */
#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */
#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */
#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */
#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */
#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */
#define TX_DAT_RDY 0x100000 /* Transmit Data Available */
#define RX_FIFO_RDY 0x200000 /* Receive Data Available */
/* Bit masks for SDH_STATUS_CLR */
#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */
#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */
#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */
#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */
#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */
#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */
#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */
#define CMD_SENT_STAT 0x80 /* CMD Sent Status */
#define DAT_END_STAT 0x100 /* Data End Status */
#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */
#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */
/* Bit masks for SDH_MASK0 */
#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */
#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */
#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */
#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */
#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */
#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */
#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */
#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */
#define DAT_END_MASK 0x100 /* Data End Mask */
#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */
#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */
#define CMD_ACT_MASK 0x800 /* CMD Active Mask */
#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */
#define RX_ACT_MASK 0x2000 /* Receive Active Mask */
#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */
#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */
#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */
#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */
#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */
#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */
#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */
#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */
/* Bit masks for SDH_FIFO_CNT */
#define FIFO_COUNT 0x7fff /* FIFO Count */
/* Bit masks for SDH_E_STATUS */
#define SDIO_INT_DET 0x2 /* SDIO Int Detected */
#define SD_CARD_DET 0x10 /* SD Card Detect */
/* Bit masks for SDH_E_MASK */
#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */
#define SCD_MSK 0x40 /* Mask Card Detect */
/* Bit masks for SDH_CFG */
#define CLKS_EN 0x1 /* Clocks Enable */
#define SD4E 0x4 /* SDIO 4-Bit Enable */
#define MWE 0x8 /* Moving Window Enable */
#define SD_RST 0x10 /* SDMMC Reset */
#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */
#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */
#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */
/* Bit masks for SDH_RD_WAIT_EN */
#define RWR 0x1 /* Read Wait Request */
#endif /* _DEF_BF516_H */
arch/blackfin/mach-bf527/include/mach/blackfin.h
浏览文件 @ 0151f94f
......@@ -32,8 +32,6 @@
#ifndef _MACH_BLACKFIN_H_
#define _MACH_BLACKFIN_H_
#define BF527_FAMILY
#include "bf527.h"
#include "mem_map.h"
#include "defBF522.h"
......
arch/blackfin/mach-bf537/boards/stamp.c
浏览文件 @ 0151f94f
......@@ -843,6 +843,71 @@ static struct platform_device bfin_spi0_device = {
};
#endif /* spi master and devices */
#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
/* SPORT SPI controller data */
static struct bfin5xx_spi_master bfin_sport_spi0_info = {
.num_chipselect = 1, /* master only supports one device */
.enable_dma = 0, /* master don't support DMA */
.pin_req = {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_DRPRI,
P_SPORT0_RSCLK, P_SPORT0_TFS, P_SPORT0_RFS, 0},
};
static struct resource bfin_sport_spi0_resource[] = {
[0] = {
.start = SPORT0_TCR1,
.end = SPORT0_TCR1 + 0xFF,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_SPORT0_ERROR,
.end = IRQ_SPORT0_ERROR,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device bfin_sport_spi0_device = {
.name = "bfin-sport-spi",
.id = 1, /* Bus number */
.num_resources = ARRAY_SIZE(bfin_sport_spi0_resource),
.resource = bfin_sport_spi0_resource,
.dev = {
.platform_data = &bfin_sport_spi0_info, /* Passed to driver */
},
};
static struct bfin5xx_spi_master bfin_sport_spi1_info = {
.num_chipselect = 1, /* master only supports one device */
.enable_dma = 0, /* master don't support DMA */
.pin_req = {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_DRPRI,
P_SPORT1_RSCLK, P_SPORT1_TFS, P_SPORT1_RFS, 0},
};
static struct resource bfin_sport_spi1_resource[] = {
[0] = {
.start = SPORT1_TCR1,
.end = SPORT1_TCR1 + 0xFF,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_SPORT1_ERROR,
.end = IRQ_SPORT1_ERROR,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device bfin_sport_spi1_device = {
.name = "bfin-sport-spi",
.id = 2, /* Bus number */
.num_resources = ARRAY_SIZE(bfin_sport_spi1_resource),
.resource = bfin_sport_spi1_resource,
.dev = {
.platform_data = &bfin_sport_spi1_info, /* Passed to driver */
},
};
#endif /* sport spi master and devices */
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
static struct platform_device bfin_fb_device = {
.name = "bf537-lq035",
......@@ -1073,6 +1138,141 @@ static struct adp5588_kpad_platform_data adp5588_kpad_data = {
};
#endif
#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
#include <linux/mfd/adp5520.h>
/*
* ADP5520/5501 Backlight Data
*/
static struct adp5520_backlight_platfrom_data adp5520_backlight_data = {
.fade_in = FADE_T_1200ms,
.fade_out = FADE_T_1200ms,
.fade_led_law = BL_LAW_LINEAR,
.en_ambl_sens = 1,
.abml_filt = BL_AMBL_FILT_640ms,
.l1_daylight_max = BL_CUR_mA(15),
.l1_daylight_dim = BL_CUR_mA(0),
.l2_office_max = BL_CUR_mA(7),
.l2_office_dim = BL_CUR_mA(0),
.l3_dark_max = BL_CUR_mA(3),
.l3_dark_dim = BL_CUR_mA(0),
.l2_trip = L2_COMP_CURR_uA(700),
.l2_hyst = L2_COMP_CURR_uA(50),
.l3_trip = L3_COMP_CURR_uA(80),
.l3_hyst = L3_COMP_CURR_uA(20),
};
/*
* ADP5520/5501 LEDs Data
*/
#include <linux/leds.h>
static struct led_info adp5520_leds[] = {
{
.name = "adp5520-led1",
.default_trigger = "none",
.flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | LED_OFFT_600ms,
},
#ifdef ADP5520_EN_ALL_LEDS
{
.name = "adp5520-led2",
.default_trigger = "none",
.flags = FLAG_ID_ADP5520_LED2_ADP5501_LED1,
},
{
.name = "adp5520-led3",
.default_trigger = "none",
.flags = FLAG_ID_ADP5520_LED3_ADP5501_LED2,
},
#endif
};
static struct adp5520_leds_platfrom_data adp5520_leds_data = {
.num_leds = ARRAY_SIZE(adp5520_leds),
.leds = adp5520_leds,
.fade_in = FADE_T_600ms,
.fade_out = FADE_T_600ms,
.led_on_time = LED_ONT_600ms,
};
/*
* ADP5520 GPIO Data
*/
static struct adp5520_gpio_platfrom_data adp5520_gpio_data = {
.gpio_start = 50,
.gpio_en_mask = GPIO_C1 | GPIO_C2 | GPIO_R2,
.gpio_pullup_mask = GPIO_C1 | GPIO_C2 | GPIO_R2,
};
/*
* ADP5520 Keypad Data
*/
#include <linux/input.h>
static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
[KEY(0, 0)] = KEY_GRAVE,
[KEY(0, 1)] = KEY_1,
[KEY(0, 2)] = KEY_2,
[KEY(0, 3)] = KEY_3,
[KEY(1, 0)] = KEY_4,
[KEY(1, 1)] = KEY_5,
[KEY(1, 2)] = KEY_6,
[KEY(1, 3)] = KEY_7,
[KEY(2, 0)] = KEY_8,
[KEY(2, 1)] = KEY_9,
[KEY(2, 2)] = KEY_0,
[KEY(2, 3)] = KEY_MINUS,
[KEY(3, 0)] = KEY_EQUAL,
[KEY(3, 1)] = KEY_BACKSLASH,
[KEY(3, 2)] = KEY_BACKSPACE,
[KEY(3, 3)] = KEY_ENTER,
};
static struct adp5520_keys_platfrom_data adp5520_keys_data = {
.rows_en_mask = ROW_R3 | ROW_R2 | ROW_R1 | ROW_R0,
.cols_en_mask = COL_C3 | COL_C2 | COL_C1 | COL_C0,
.keymap = adp5520_keymap,
.keymapsize = ARRAY_SIZE(adp5520_keymap),
.repeat = 0,
};
/*
* ADP5520/5501 Multifuction Device Init Data
*/
static struct adp5520_subdev_info adp5520_subdevs[] = {
{
.name = "adp5520-backlight",
.id = ID_ADP5520,
.platform_data = &adp5520_backlight_data,
},
{
.name = "adp5520-led",
.id = ID_ADP5520,
.platform_data = &adp5520_leds_data,
},
{
.name = "adp5520-gpio",
.id = ID_ADP5520,
.platform_data = &adp5520_gpio_data,
},
{
.name = "adp5520-keys",
.id = ID_ADP5520,
.platform_data = &adp5520_keys_data,
},
};
static struct adp5520_platform_data adp5520_pdev_data = {
.num_subdevs = ARRAY_SIZE(adp5520_subdevs),
.subdevs = adp5520_subdevs,
};
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
{
......@@ -1105,6 +1305,13 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
.platform_data = (void *)&adp5588_kpad_data,
},
#endif
#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
{
I2C_BOARD_INFO("pmic-adp5520", 0x32),
.irq = IRQ_PF7,
.platform_data = (void *)&adp5520_pdev_data,
},
#endif
};
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
......@@ -1120,8 +1327,11 @@ static struct platform_device bfin_sport1_uart_device = {
#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
#define PATA_INT IRQ_PF5
#define CF_IDE_NAND_CARD_USE_HDD_INTERFACE
/* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */
#ifdef CF_IDE_NAND_CARD_USE_HDD_INTERFACE
#define PATA_INT IRQ_PF5
static struct pata_platform_info bfin_pata_platform_data = {
.ioport_shift = 1,
.irq_flags = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
......@@ -1144,6 +1354,24 @@ static struct resource bfin_pata_resources[] = {
.flags = IORESOURCE_IRQ,
},
};
#elif defined(CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE)
static struct pata_platform_info bfin_pata_platform_data = {
.ioport_shift = 0,
};
static struct resource bfin_pata_resources[] = {
{
.start = 0x20211820,
.end = 0x2021183F,
.flags = IORESOURCE_MEM,
},
{
.start = 0x2021181C,
.end = 0x2021181F,
.flags = IORESOURCE_MEM,
},
};
#endif
static struct platform_device bfin_pata_device = {
.name = "pata_platform",
......@@ -1232,6 +1460,11 @@ static struct platform_device *stamp_devices[] __initdata = {
&bfin_spi0_device,
#endif
#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
&bfin_sport_spi0_device,
&bfin_sport_spi1_device,
#endif
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
&bfin_fb_device,
#endif
......
arch/blackfin/mach-bf548/include/mach/blackfin.h
浏览文件 @ 0151f94f
......@@ -32,8 +32,6 @@
#ifndef _MACH_BLACKFIN_H_
#define _MACH_BLACKFIN_H_
#define BF548_FAMILY
#include "bf548.h"
#include "mem_map.h"
#include "anomaly.h"
......
arch/blackfin/mach-common/pm.c
浏览文件 @ 0151f94f
......@@ -287,7 +287,7 @@ int bfin_pm_suspend_mem_enter(void)
static int bfin_pm_valid(suspend_state_t state)
{
return (state == PM_SUSPEND_STANDBY
#ifndef BF533_FAMILY
#if !(defined(BF533_FAMILY) || defined(CONFIG_BF561))
/*
* On BF533/2/1:
* If we enter Hibernate the SCKE Pin is driven Low,
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或