• S
    ks8851: Fix mutex deadlock in ks8851_net_stop() · c5a99937
    Stephen Boyd 提交于
    There is a potential deadlock scenario when the ks8851 driver
    is removed. The interrupt handler schedules a workqueue which
    acquires a mutex that ks8851_net_stop() also acquires before
    flushing the workqueue. Previously lockdep wouldn't be able
    to find this problem but now that it has the support we can
    trigger this lockdep warning by rmmoding the driver after
    an ifconfig up.
    
    Fix the possible deadlock by disabling the interrupts in
    the chip and then release the lock across the workqueue
    flushing. The mutex is only there to proect the registers
    anyway so this should be ok.
    
    =======================================================
    [ INFO: possible circular locking dependency detected ]
    3.0.21-00021-g8b33780-dirty #2911
    -------------------------------------------------------
    rmmod/125 is trying to acquire lock:
     ((&ks->irq_work)){+.+...}, at: [<c019e0b8>] flush_work+0x0/0xac
    
    but task is already holding lock:
     (&ks->lock){+.+...}, at: [<bf00b850>] ks8851_net_stop+0x64/0x138 [ks8851]
    
    which lock already depends on the new lock.
    
    the existing dependency chain (in reverse order) is:
    
    -> #1 (&ks->lock){+.+...}:
           [<c01b89c8>] __lock_acquire+0x940/0x9f8
           [<c01b9058>] lock_acquire+0x10c/0x130
           [<c083dbec>] mutex_lock_nested+0x68/0x3dc
           [<bf00bd48>] ks8851_irq_work+0x24/0x46c [ks8851]
           [<c019c580>] process_one_work+0x2d8/0x518
           [<c019cb98>] worker_thread+0x220/0x3a0
           [<c01a2ad4>] kthread+0x88/0x94
           [<c0107008>] kernel_thread_exit+0x0/0x8
    
    -> #0 ((&ks->irq_work)){+.+...}:
           [<c01b7984>] validate_chain+0x914/0x1018
           [<c01b89c8>] __lock_acquire+0x940/0x9f8
           [<c01b9058>] lock_acquire+0x10c/0x130
           [<c019e104>] flush_work+0x4c/0xac
           [<bf00b858>] ks8851_net_stop+0x6c/0x138 [ks8851]
           [<c06b209c>] __dev_close_many+0x98/0xcc
           [<c06b2174>] dev_close_many+0x68/0xd0
           [<c06b22ec>] rollback_registered_many+0xcc/0x2b8
           [<c06b2554>] rollback_registered+0x28/0x34
           [<c06b25b8>] unregister_netdevice_queue+0x58/0x7c
           [<c06b25f4>] unregister_netdev+0x18/0x20
           [<bf00c1f4>] ks8851_remove+0x64/0xb4 [ks8851]
           [<c049ddf0>] spi_drv_remove+0x18/0x1c
           [<c0468e98>] __device_release_driver+0x7c/0xbc
           [<c0468f64>] driver_detach+0x8c/0xb4
           [<c0467f00>] bus_remove_driver+0xb8/0xe8
           [<c01c1d20>] sys_delete_module+0x1e8/0x27c
           [<c0105ec0>] ret_fast_syscall+0x0/0x3c
    
    other info that might help us debug this:
    
     Possible unsafe locking scenario:
    
           CPU0                    CPU1
           ----                    ----
      lock(&ks->lock);
                                   lock((&ks->irq_work));
                                   lock(&ks->lock);
      lock((&ks->irq_work));
    
     *** DEADLOCK ***
    
    4 locks held by rmmod/125:
     #0:  (&__lockdep_no_validate__){+.+.+.}, at: [<c0468f44>] driver_detach+0x6c/0xb4
     #1:  (&__lockdep_no_validate__){+.+.+.}, at: [<c0468f50>] driver_detach+0x78/0xb4
     #2:  (rtnl_mutex){+.+.+.}, at: [<c06b25e8>] unregister_netdev+0xc/0x20
     #3:  (&ks->lock){+.+...}, at: [<bf00b850>] ks8851_net_stop+0x64/0x138 [ks8851]
    
    Cc: Ben Dooks <ben-linux@fluff.org>
    Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
    Signed-off-by: NDavid S. Miller <davem@davemloft.net>
    c5a99937
ks8851.c 39.8 KB