db88f5281-setup.c

/*
 * arch/arm/mach-orion5x/db88f5281-setup.c
 *
 * Marvell Orion-2 Development Board Setup
 *
 * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
 *
 * This file is licensed under the terms of the GNU General Public
 * License version 2.  This program is licensed "as is" without any
 * warranty of any kind, whether express or implied.
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/pci.h>
#include <linux/irq.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/nand.h>
#include <linux/timer.h>
#include <linux/mv643xx_eth.h>
#include <linux/i2c.h>
#include <asm/mach-types.h>
#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <asm/arch/orion5x.h>
#include <asm/plat-orion/orion_nand.h>
#include "common.h"

/*****************************************************************************
 * DB-88F5281 on board devices
 ****************************************************************************/

/*
 * 512K NOR flash Device bus boot chip select
 */

#define DB88F5281_NOR_BOOT_BASE		0xf4000000
#define DB88F5281_NOR_BOOT_SIZE		SZ_512K

/*
 * 7-Segment on Device bus chip select 0
 */

#define DB88F5281_7SEG_BASE		0xfa000000
#define DB88F5281_7SEG_SIZE		SZ_1K

/*
 * 32M NOR flash on Device bus chip select 1
 */

#define DB88F5281_NOR_BASE		0xfc000000
#define DB88F5281_NOR_SIZE		SZ_32M

/*
 * 32M NAND flash on Device bus chip select 2
 */

#define DB88F5281_NAND_BASE		0xfa800000
#define DB88F5281_NAND_SIZE		SZ_1K

/*
 * PCI
 */

#define DB88F5281_PCI_SLOT0_OFFS		7
#define DB88F5281_PCI_SLOT0_IRQ_PIN		12
#define DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN	13

/*****************************************************************************
 * 512M NOR Flash on Device bus Boot CS
 ****************************************************************************/

static struct physmap_flash_data db88f5281_boot_flash_data = {
	.width		= 1,	/* 8 bit bus width */
};

static struct resource db88f5281_boot_flash_resource = {
	.flags		= IORESOURCE_MEM,
	.start		= DB88F5281_NOR_BOOT_BASE,
	.end		= DB88F5281_NOR_BOOT_BASE + DB88F5281_NOR_BOOT_SIZE - 1,
};

static struct platform_device db88f5281_boot_flash = {
	.name		= "physmap-flash",
	.id		= 0,
	.dev		= {
		.platform_data = &db88f5281_boot_flash_data,
	},
	.num_resources	= 1,
	.resource	= &db88f5281_boot_flash_resource,
};

/*****************************************************************************
 * 32M NOR Flash on Device bus CS1
 ****************************************************************************/

static struct physmap_flash_data db88f5281_nor_flash_data = {
	.width		= 4,	/* 32 bit bus width */
};

static struct resource db88f5281_nor_flash_resource = {
	.flags		= IORESOURCE_MEM,
	.start		= DB88F5281_NOR_BASE,
	.end		= DB88F5281_NOR_BASE + DB88F5281_NOR_SIZE - 1,
};

static struct platform_device db88f5281_nor_flash = {
	.name		= "physmap-flash",
	.id		= 1,
	.dev		= {
		.platform_data = &db88f5281_nor_flash_data,
	},
	.num_resources	= 1,
	.resource	= &db88f5281_nor_flash_resource,
};

/*****************************************************************************
 * 32M NAND Flash on Device bus CS2
 ****************************************************************************/

static struct mtd_partition db88f5281_nand_parts[] = {
	{
		.name = "kernel",
		.offset = 0,
		.size = SZ_2M,
	},
	{
		.name = "root",
		.offset = SZ_2M,
		.size = (SZ_16M - SZ_2M),
	},
	{
		.name = "user",
		.offset = SZ_16M,
		.size = SZ_8M,
	},
	{
		.name = "recovery",
		.offset = (SZ_16M + SZ_8M),
		.size = SZ_8M,
	},
};

static struct resource db88f5281_nand_resource = {
	.flags		= IORESOURCE_MEM,
	.start		= DB88F5281_NAND_BASE,
	.end		= DB88F5281_NAND_BASE + DB88F5281_NAND_SIZE - 1,
};

static struct orion_nand_data db88f5281_nand_data = {
	.parts		= db88f5281_nand_parts,
	.nr_parts	= ARRAY_SIZE(db88f5281_nand_parts),
	.cle		= 0,
	.ale		= 1,
	.width		= 8,
};

static struct platform_device db88f5281_nand_flash = {
	.name		= "orion_nand",
	.id		= -1,
	.dev		= {
		.platform_data	= &db88f5281_nand_data,
	},
	.resource	= &db88f5281_nand_resource,
	.num_resources	= 1,
};

/*****************************************************************************
 * 7-Segment on Device bus CS0
 * Dummy counter every 2 sec
 ****************************************************************************/

static void __iomem *db88f5281_7seg;
static struct timer_list db88f5281_timer;

static void db88f5281_7seg_event(unsigned long data)
{
	static int count = 0;
	writel(0, db88f5281_7seg + (count << 4));
	count = (count + 1) & 7;
	mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
}

static int __init db88f5281_7seg_init(void)
{
	if (machine_is_db88f5281()) {
		db88f5281_7seg = ioremap(DB88F5281_7SEG_BASE,
					DB88F5281_7SEG_SIZE);
		if (!db88f5281_7seg) {
			printk(KERN_ERR "Failed to ioremap db88f5281_7seg\n");
			return -EIO;
		}
		setup_timer(&db88f5281_timer, db88f5281_7seg_event, 0);
		mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
	}

	return 0;
}

__initcall(db88f5281_7seg_init);

/*****************************************************************************
 * PCI
 ****************************************************************************/

void __init db88f5281_pci_preinit(void)
{
	int pin;

	/*
	 * Configure PCI GPIO IRQ pins
	 */
	pin = DB88F5281_PCI_SLOT0_IRQ_PIN;
	if (gpio_request(pin, "PCI Int1") == 0) {
		if (gpio_direction_input(pin) == 0) {
			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
		} else {
			printk(KERN_ERR "db88f5281_pci_preinit faield to "
					"set_irq_type pin %d\n", pin);
			gpio_free(pin);
		}
	} else {
		printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
	}

	pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN;
	if (gpio_request(pin, "PCI Int2") == 0) {
		if (gpio_direction_input(pin) == 0) {
			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
		} else {
			printk(KERN_ERR "db88f5281_pci_preinit faield "
					"to set_irq_type pin %d\n", pin);
			gpio_free(pin);
		}
	} else {
		printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
	}
}

static int __init db88f5281_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
	int irq;

	/*
	 * Check for devices with hard-wired IRQs.
	 */
	irq = orion5x_pci_map_irq(dev, slot, pin);
	if (irq != -1)
		return irq;

	/*
	 * PCI IRQs are connected via GPIOs.
	 */
	switch (slot - DB88F5281_PCI_SLOT0_OFFS) {
	case 0:
		return gpio_to_irq(DB88F5281_PCI_SLOT0_IRQ_PIN);
	case 1:
	case 2:
		return gpio_to_irq(DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN);
	default:
		return -1;
	}
}

static struct hw_pci db88f5281_pci __initdata = {
	.nr_controllers	= 2,
	.preinit	= db88f5281_pci_preinit,
	.swizzle	= pci_std_swizzle,
	.setup		= orion5x_pci_sys_setup,
	.scan		= orion5x_pci_sys_scan_bus,
	.map_irq	= db88f5281_pci_map_irq,
};

static int __init db88f5281_pci_init(void)
{
	if (machine_is_db88f5281())
		pci_common_init(&db88f5281_pci);

	return 0;
}

subsys_initcall(db88f5281_pci_init);

/*****************************************************************************
 * Ethernet
 ****************************************************************************/
static struct mv643xx_eth_platform_data db88f5281_eth_data = {
	.phy_addr	= 8,
	.force_phy_addr = 1,
};

/*****************************************************************************
 * RTC DS1339 on I2C bus
 ****************************************************************************/
static struct i2c_board_info __initdata db88f5281_i2c_rtc = {
	I2C_BOARD_INFO("ds1339", 0x68),
};

/*****************************************************************************
 * General Setup
 ****************************************************************************/

static struct platform_device *db88f5281_devs[] __initdata = {
	&db88f5281_boot_flash,
	&db88f5281_nor_flash,
	&db88f5281_nand_flash,
};

static void __init db88f5281_init(void)
{
	/*
	 * Basic Orion setup. Need to be called early.
	 */
	orion5x_init();

	/*
	 * Setup the CPU address decode windows for our on-board devices
	 */
	orion5x_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE,
				DB88F5281_NOR_BOOT_SIZE);
	orion5x_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE);
	orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE);
	orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE);

	/*
	 * Setup Multiplexing Pins:
	 * MPP0: GPIO (USB Over Current)	MPP1: GPIO (USB Vbat input)
	 * MPP2: PCI_REQn[2]			MPP3: PCI_GNTn[2]
	 * MPP4: PCI_REQn[3]			MPP5: PCI_GNTn[3]
	 * MPP6: GPIO (JP0, CON17.2)		MPP7: GPIO (JP1, CON17.1)
	 * MPP8: GPIO (JP2, CON11.2)		MPP9: GPIO (JP3, CON11.3)
	 * MPP10: GPIO (RTC int)		MPP11: GPIO (Baud Rate Generator)
	 * MPP12: GPIO (PCI int 1)		MPP13: GPIO (PCI int 2)
	 * MPP14: NAND_REn[2]			MPP15: NAND_WEn[2]
	 * MPP16: UART1_RX			MPP17: UART1_TX
	 * MPP18: UART1_CTS			MPP19: UART1_RTS
	 * MPP-DEV: DEV_D[16:31]
	 */
	orion5x_write(MPP_0_7_CTRL, 0x00222203);
	orion5x_write(MPP_8_15_CTRL, 0x44000000);
	orion5x_write(MPP_16_19_CTRL, 0);
	orion5x_write(MPP_DEV_CTRL, 0);

	orion5x_gpio_set_valid_pins(0x00003fc3);

	platform_add_devices(db88f5281_devs, ARRAY_SIZE(db88f5281_devs));
	i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
	orion5x_eth_init(&db88f5281_eth_data);
}

MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
	/* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
	.phys_io	= ORION5X_REGS_PHYS_BASE,
	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xfffc,
	.boot_params	= 0x00000100,
	.init_machine	= db88f5281_init,
	.map_io		= orion5x_map_io,
	.init_irq	= orion5x_init_irq,
	.timer		= &orion5x_timer,
MACHINE_END