at91sam9rl_devices.c

/*
 *  Copyright (C) 2007 Atmel Corporation
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file COPYING in the main directory of this archive for
 * more details.
 */

#include <asm/mach/arch.h>
#include <asm/mach/map.h>

#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>

#include <linux/fb.h>
#include <video/atmel_lcdc.h>

#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
#include <asm/arch/at91sam9rl.h>
#include <asm/arch/at91sam9rl_matrix.h>
#include <asm/arch/at91sam926x_mc.h>

#include "generic.h"


/* --------------------------------------------------------------------
 *  MMC / SD
 * -------------------------------------------------------------------- */

#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct at91_mmc_data mmc_data;

static struct resource mmc_resources[] = {
	[0] = {
		.start	= AT91SAM9RL_BASE_MCI,
		.end	= AT91SAM9RL_BASE_MCI + SZ_16K - 1,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= AT91SAM9RL_ID_MCI,
		.end	= AT91SAM9RL_ID_MCI,
		.flags	= IORESOURCE_IRQ,
	},
};

static struct platform_device at91sam9rl_mmc_device = {
	.name		= "at91_mci",
	.id		= -1,
	.dev		= {
				.dma_mask		= &mmc_dmamask,
				.coherent_dma_mask	= DMA_BIT_MASK(32),
				.platform_data		= &mmc_data,
	},
	.resource	= mmc_resources,
	.num_resources	= ARRAY_SIZE(mmc_resources),
};

void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
{
	if (!data)
		return;

	/* input/irq */
	if (data->det_pin) {
		at91_set_gpio_input(data->det_pin, 1);
		at91_set_deglitch(data->det_pin, 1);
	}
	if (data->wp_pin)
		at91_set_gpio_input(data->wp_pin, 1);
	if (data->vcc_pin)
		at91_set_gpio_output(data->vcc_pin, 0);

	/* CLK */
	at91_set_A_periph(AT91_PIN_PA2, 0);

	/* CMD */
	at91_set_A_periph(AT91_PIN_PA1, 1);

	/* DAT0, maybe DAT1..DAT3 */
	at91_set_A_periph(AT91_PIN_PA0, 1);
	if (data->wire4) {
		at91_set_A_periph(AT91_PIN_PA3, 1);
		at91_set_A_periph(AT91_PIN_PA4, 1);
		at91_set_A_periph(AT91_PIN_PA5, 1);
	}

	mmc_data = *data;
	platform_device_register(&at91sam9rl_mmc_device);
}
#else
void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
#endif


/* --------------------------------------------------------------------
 *  NAND / SmartMedia
 * -------------------------------------------------------------------- */

#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
static struct at91_nand_data nand_data;

#define NAND_BASE	AT91_CHIPSELECT_3

static struct resource nand_resources[] = {
	{
		.start	= NAND_BASE,
		.end	= NAND_BASE + SZ_256M - 1,
		.flags	= IORESOURCE_MEM,
	}
};

static struct platform_device at91_nand_device = {
	.name		= "at91_nand",
	.id		= -1,
	.dev		= {
				.platform_data	= &nand_data,
	},
	.resource	= nand_resources,
	.num_resources	= ARRAY_SIZE(nand_resources),
};

void __init at91_add_device_nand(struct at91_nand_data *data)
{
	unsigned long csa;

	if (!data)
		return;

	csa = at91_sys_read(AT91_MATRIX_EBICSA);
	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);

	/* set the bus interface characteristics */
	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
			| AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));

	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
			| AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));

	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));

	at91_sys_write(AT91_SMC_MODE(3), AT91_SMC_DBW_8 | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));

	/* enable pin */
	if (data->enable_pin)
		at91_set_gpio_output(data->enable_pin, 1);

	/* ready/busy pin */
	if (data->rdy_pin)
		at91_set_gpio_input(data->rdy_pin, 1);

	/* card detect pin */
	if (data->det_pin)
		at91_set_gpio_input(data->det_pin, 1);

	at91_set_A_periph(AT91_PIN_PB4, 0);		/* NANDOE */
	at91_set_A_periph(AT91_PIN_PB5, 0);		/* NANDWE */

	nand_data = *data;
	platform_device_register(&at91_nand_device);
}

#else
void __init at91_add_device_nand(struct at91_nand_data *data) {}
#endif


/* --------------------------------------------------------------------
 *  TWI (i2c)
 * -------------------------------------------------------------------- */

/*
 * Prefer the GPIO code since the TWI controller isn't robust
 * (gets overruns and underruns under load) and can only issue
 * repeated STARTs in one scenario (the driver doesn't yet handle them).
 */
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)

static struct i2c_gpio_platform_data pdata = {
	.sda_pin		= AT91_PIN_PA23,
	.sda_is_open_drain	= 1,
	.scl_pin		= AT91_PIN_PA24,
	.scl_is_open_drain	= 1,
	.udelay			= 2,		/* ~100 kHz */
};

static struct platform_device at91sam9rl_twi_device = {
	.name			= "i2c-gpio",
	.id			= -1,
	.dev.platform_data	= &pdata,
};

void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
{
	at91_set_GPIO_periph(AT91_PIN_PA23, 1);		/* TWD (SDA) */
	at91_set_multi_drive(AT91_PIN_PA23, 1);

	at91_set_GPIO_periph(AT91_PIN_PA24, 1);		/* TWCK (SCL) */
	at91_set_multi_drive(AT91_PIN_PA24, 1);

	i2c_register_board_info(0, devices, nr_devices);
	platform_device_register(&at91sam9rl_twi_device);
}

#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)

static struct resource twi_resources[] = {
	[0] = {
		.start	= AT91SAM9RL_BASE_TWI0,
		.end	= AT91SAM9RL_BASE_TWI0 + SZ_16K - 1,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= AT91SAM9RL_ID_TWI0,
		.end	= AT91SAM9RL_ID_TWI0,
		.flags	= IORESOURCE_IRQ,
	},
};

static struct platform_device at91sam9rl_twi_device = {
	.name		= "at91_i2c",
	.id		= -1,
	.resource	= twi_resources,
	.num_resources	= ARRAY_SIZE(twi_resources),
};

void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
{
	/* pins used for TWI interface */
	at91_set_A_periph(AT91_PIN_PA23, 0);		/* TWD */
	at91_set_multi_drive(AT91_PIN_PA23, 1);

	at91_set_A_periph(AT91_PIN_PA24, 0);		/* TWCK */
	at91_set_multi_drive(AT91_PIN_PA24, 1);

	i2c_register_board_info(0, devices, nr_devices);
	platform_device_register(&at91sam9rl_twi_device);
}
#else
void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
#endif


/* --------------------------------------------------------------------
 *  SPI
 * -------------------------------------------------------------------- */

#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
static u64 spi_dmamask = DMA_BIT_MASK(32);

static struct resource spi_resources[] = {
	[0] = {
		.start	= AT91SAM9RL_BASE_SPI,
		.end	= AT91SAM9RL_BASE_SPI + SZ_16K - 1,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= AT91SAM9RL_ID_SPI,
		.end	= AT91SAM9RL_ID_SPI,
		.flags	= IORESOURCE_IRQ,
	},
};

static struct platform_device at91sam9rl_spi_device = {
	.name		= "atmel_spi",
	.id		= 0,
	.dev		= {
				.dma_mask		= &spi_dmamask,
				.coherent_dma_mask	= DMA_BIT_MASK(32),
	},
	.resource	= spi_resources,
	.num_resources	= ARRAY_SIZE(spi_resources),
};

static const unsigned spi_standard_cs[4] = { AT91_PIN_PA28, AT91_PIN_PB7, AT91_PIN_PD8, AT91_PIN_PD9 };


void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
{
	int i;
	unsigned long cs_pin;

	at91_set_A_periph(AT91_PIN_PA25, 0);	/* MISO */
	at91_set_A_periph(AT91_PIN_PA26, 0);	/* MOSI */
	at91_set_A_periph(AT91_PIN_PA27, 0);	/* SPCK */

	/* Enable SPI chip-selects */
	for (i = 0; i < nr_devices; i++) {
		if (devices[i].controller_data)
			cs_pin = (unsigned long) devices[i].controller_data;
		else
			cs_pin = spi_standard_cs[devices[i].chip_select];

		/* enable chip-select pin */
		at91_set_gpio_output(cs_pin, 1);

		/* pass chip-select pin to driver */
		devices[i].controller_data = (void *) cs_pin;
	}

	spi_register_board_info(devices, nr_devices);
	platform_device_register(&at91sam9rl_spi_device);
}
#else
void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
#endif


/* --------------------------------------------------------------------
 *  LCD Controller
 * -------------------------------------------------------------------- */

#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
static u64 lcdc_dmamask = DMA_BIT_MASK(32);
static struct atmel_lcdfb_info lcdc_data;

static struct resource lcdc_resources[] = {
	[0] = {
		.start	= AT91SAM9RL_LCDC_BASE,
		.end	= AT91SAM9RL_LCDC_BASE + SZ_4K - 1,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= AT91SAM9RL_ID_LCDC,
		.end	= AT91SAM9RL_ID_LCDC,
		.flags	= IORESOURCE_IRQ,
	},
#if defined(CONFIG_FB_INTSRAM)
	[2] = {
		.start	= AT91SAM9RL_SRAM_BASE,
		.end	= AT91SAM9RL_SRAM_BASE + AT91SAM9RL_SRAM_SIZE - 1,
		.flags	= IORESOURCE_MEM,
	},
#endif
};

static struct platform_device at91_lcdc_device = {
	.name		= "atmel_lcdfb",
	.id		= 0,
	.dev		= {
				.dma_mask		= &lcdc_dmamask,
				.coherent_dma_mask	= DMA_BIT_MASK(32),
				.platform_data		= &lcdc_data,
	},
	.resource	= lcdc_resources,
	.num_resources	= ARRAY_SIZE(lcdc_resources),
};

void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
{
	if (!data) {
		return;
	}

	at91_set_B_periph(AT91_PIN_PC1, 0);	/* LCDPWR */
	at91_set_A_periph(AT91_PIN_PC5, 0);	/* LCDHSYNC */
	at91_set_A_periph(AT91_PIN_PC6, 0);	/* LCDDOTCK */
	at91_set_A_periph(AT91_PIN_PC7, 0);	/* LCDDEN */
	at91_set_A_periph(AT91_PIN_PC3, 0);	/* LCDCC */
	at91_set_B_periph(AT91_PIN_PC9, 0);	/* LCDD3 */
	at91_set_B_periph(AT91_PIN_PC10, 0);	/* LCDD4 */
	at91_set_B_periph(AT91_PIN_PC11, 0);	/* LCDD5 */
	at91_set_B_periph(AT91_PIN_PC12, 0);	/* LCDD6 */
	at91_set_B_periph(AT91_PIN_PC13, 0);	/* LCDD7 */
	at91_set_B_periph(AT91_PIN_PC15, 0);	/* LCDD11 */
	at91_set_B_periph(AT91_PIN_PC16, 0);	/* LCDD12 */
	at91_set_B_periph(AT91_PIN_PC17, 0);	/* LCDD13 */
	at91_set_B_periph(AT91_PIN_PC18, 0);	/* LCDD14 */
	at91_set_B_periph(AT91_PIN_PC19, 0);	/* LCDD15 */
	at91_set_B_periph(AT91_PIN_PC20, 0);	/* LCDD18 */
	at91_set_B_periph(AT91_PIN_PC21, 0);	/* LCDD19 */
	at91_set_B_periph(AT91_PIN_PC22, 0);	/* LCDD20 */
	at91_set_B_periph(AT91_PIN_PC23, 0);	/* LCDD21 */
	at91_set_B_periph(AT91_PIN_PC24, 0);	/* LCDD22 */
	at91_set_B_periph(AT91_PIN_PC25, 0);	/* LCDD23 */

	lcdc_data = *data;
	platform_device_register(&at91_lcdc_device);
}
#else
void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
#endif


/* --------------------------------------------------------------------
 *  RTC
 * -------------------------------------------------------------------- */

#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
static struct platform_device at91sam9rl_rtc_device = {
	.name		= "at91_rtc",
	.id		= -1,
	.num_resources	= 0,
};

static void __init at91_add_device_rtc(void)
{
	platform_device_register(&at91sam9rl_rtc_device);
}
#else
static void __init at91_add_device_rtc(void) {}
#endif


/* --------------------------------------------------------------------
 *  RTT
 * -------------------------------------------------------------------- */

static struct resource rtt_resources[] = {
	{
		.start	= AT91_BASE_SYS + AT91_RTT,
		.end	= AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
		.flags	= IORESOURCE_MEM,
	}
};

static struct platform_device at91sam9rl_rtt_device = {
	.name		= "at91_rtt",
	.id		= -1,
	.resource	= rtt_resources,
	.num_resources	= ARRAY_SIZE(rtt_resources),
};

static void __init at91_add_device_rtt(void)
{
	platform_device_register(&at91sam9rl_rtt_device);
}


/* --------------------------------------------------------------------
 *  Watchdog
 * -------------------------------------------------------------------- */

#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
static struct platform_device at91sam9rl_wdt_device = {
	.name		= "at91_wdt",
	.id		= -1,
	.num_resources	= 0,
};

static void __init at91_add_device_watchdog(void)
{
	platform_device_register(&at91sam9rl_wdt_device);
}
#else
static void __init at91_add_device_watchdog(void) {}
#endif


/* --------------------------------------------------------------------
 *  LEDs
 * -------------------------------------------------------------------- */

#if defined(CONFIG_LEDS)
u8 at91_leds_cpu;
u8 at91_leds_timer;

void __init at91_init_leds(u8 cpu_led, u8 timer_led)
{
	/* Enable GPIO to access the LEDs */
	at91_set_gpio_output(cpu_led, 1);
	at91_set_gpio_output(timer_led, 1);

	at91_leds_cpu	= cpu_led;
	at91_leds_timer	= timer_led;
}
#else
void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
#endif


/* --------------------------------------------------------------------
 *  SSC -- Synchronous Serial Controller
 * -------------------------------------------------------------------- */

#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
static u64 ssc0_dmamask = DMA_BIT_MASK(32);

static struct resource ssc0_resources[] = {
	[0] = {
		.start	= AT91SAM9RL_BASE_SSC0,
		.end	= AT91SAM9RL_BASE_SSC0 + SZ_16K - 1,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= AT91SAM9RL_ID_SSC0,
		.end	= AT91SAM9RL_ID_SSC0,
		.flags	= IORESOURCE_IRQ,
	},
};

static struct platform_device at91sam9rl_ssc0_device = {
	.name	= "ssc",
	.id	= 0,
	.dev	= {
		.dma_mask		= &ssc0_dmamask,
		.coherent_dma_mask	= DMA_BIT_MASK(32),
	},
	.resource	= ssc0_resources,
	.num_resources	= ARRAY_SIZE(ssc0_resources),
};

static inline void configure_ssc0_pins(unsigned pins)
{
	if (pins & ATMEL_SSC_TF)
		at91_set_A_periph(AT91_PIN_PC0, 1);
	if (pins & ATMEL_SSC_TK)
		at91_set_A_periph(AT91_PIN_PC1, 1);
	if (pins & ATMEL_SSC_TD)
		at91_set_A_periph(AT91_PIN_PA15, 1);
	if (pins & ATMEL_SSC_RD)
		at91_set_A_periph(AT91_PIN_PA16, 1);
	if (pins & ATMEL_SSC_RK)
		at91_set_B_periph(AT91_PIN_PA10, 1);
	if (pins & ATMEL_SSC_RF)
		at91_set_B_periph(AT91_PIN_PA22, 1);
}

static u64 ssc1_dmamask = DMA_BIT_MASK(32);

static struct resource ssc1_resources[] = {
	[0] = {
		.start	= AT91SAM9RL_BASE_SSC1,
		.end	= AT91SAM9RL_BASE_SSC1 + SZ_16K - 1,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= AT91SAM9RL_ID_SSC1,
		.end	= AT91SAM9RL_ID_SSC1,
		.flags	= IORESOURCE_IRQ,
	},
};

static struct platform_device at91sam9rl_ssc1_device = {
	.name	= "ssc",
	.id	= 1,
	.dev	= {
		.dma_mask		= &ssc1_dmamask,
		.coherent_dma_mask	= DMA_BIT_MASK(32),
	},
	.resource	= ssc1_resources,
	.num_resources	= ARRAY_SIZE(ssc1_resources),
};

static inline void configure_ssc1_pins(unsigned pins)
{
	if (pins & ATMEL_SSC_TF)
		at91_set_B_periph(AT91_PIN_PA29, 1);
	if (pins & ATMEL_SSC_TK)
		at91_set_B_periph(AT91_PIN_PA30, 1);
	if (pins & ATMEL_SSC_TD)
		at91_set_B_periph(AT91_PIN_PA13, 1);
	if (pins & ATMEL_SSC_RD)
		at91_set_B_periph(AT91_PIN_PA14, 1);
	if (pins & ATMEL_SSC_RK)
		at91_set_B_periph(AT91_PIN_PA9, 1);
	if (pins & ATMEL_SSC_RF)
		at91_set_B_periph(AT91_PIN_PA8, 1);
}

/*
 * Return the device node so that board init code can use it as the
 * parent for the device node reflecting how it's used on this board.
 *
 * SSC controllers are accessed through library code, instead of any
 * kind of all-singing/all-dancing driver.  For example one could be
 * used by a particular I2S audio codec's driver, while another one
 * on the same system might be used by a custom data capture driver.
 */
void __init at91_add_device_ssc(unsigned id, unsigned pins)
{
	struct platform_device *pdev;

	/*
	 * NOTE: caller is responsible for passing information matching
	 * "pins" to whatever will be using each particular controller.
	 */
	switch (id) {
	case AT91SAM9RL_ID_SSC0:
		pdev = &at91sam9rl_ssc0_device;
		configure_ssc0_pins(pins);
		at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
		break;
	case AT91SAM9RL_ID_SSC1:
		pdev = &at91sam9rl_ssc1_device;
		configure_ssc1_pins(pins);
		at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
		break;
	default:
		return;
	}

	platform_device_register(pdev);
}

#else
void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#endif


/* --------------------------------------------------------------------
 *  UART
 * -------------------------------------------------------------------- */

#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
	[0] = {
		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= AT91_ID_SYS,
		.end	= AT91_ID_SYS,
		.flags	= IORESOURCE_IRQ,
	},
};

static struct atmel_uart_data dbgu_data = {
	.use_dma_tx	= 0,
	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};

static u64 dbgu_dmamask = DMA_BIT_MASK(32);

static struct platform_device at91sam9rl_dbgu_device = {
	.name		= "atmel_usart",
	.id		= 0,
	.dev		= {
				.dma_mask		= &dbgu_dmamask,
				.coherent_dma_mask	= DMA_BIT_MASK(32),
				.platform_data		= &dbgu_data,
	},
	.resource	= dbgu_resources,
	.num_resources	= ARRAY_SIZE(dbgu_resources),
};

static inline void configure_dbgu_pins(void)
{
	at91_set_A_periph(AT91_PIN_PA21, 0);		/* DRXD */
	at91_set_A_periph(AT91_PIN_PA22, 1);		/* DTXD */
}

static struct resource uart0_resources[] = {
	[0] = {
		.start	= AT91SAM9RL_BASE_US0,
		.end	= AT91SAM9RL_BASE_US0 + SZ_16K - 1,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= AT91SAM9RL_ID_US0,
		.end	= AT91SAM9RL_ID_US0,
		.flags	= IORESOURCE_IRQ,
	},
};

static struct atmel_uart_data uart0_data = {
	.use_dma_tx	= 1,
	.use_dma_rx	= 1,
};

static u64 uart0_dmamask = DMA_BIT_MASK(32);

static struct platform_device at91sam9rl_uart0_device = {
	.name		= "atmel_usart",
	.id		= 1,
	.dev		= {
				.dma_mask		= &uart0_dmamask,
				.coherent_dma_mask	= DMA_BIT_MASK(32),
				.platform_data		= &uart0_data,
	},
	.resource	= uart0_resources,
	.num_resources	= ARRAY_SIZE(uart0_resources),
};

static inline void configure_usart0_pins(void)
{
	at91_set_A_periph(AT91_PIN_PA6, 1);		/* TXD0 */
	at91_set_A_periph(AT91_PIN_PA7, 0);		/* RXD0 */
	at91_set_A_periph(AT91_PIN_PA9, 0);		/* RTS0 */
	at91_set_A_periph(AT91_PIN_PA10, 0);		/* CTS0 */
}

static struct resource uart1_resources[] = {
	[0] = {
		.start	= AT91SAM9RL_BASE_US1,
		.end	= AT91SAM9RL_BASE_US1 + SZ_16K - 1,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= AT91SAM9RL_ID_US1,
		.end	= AT91SAM9RL_ID_US1,
		.flags	= IORESOURCE_IRQ,
	},
};

static struct atmel_uart_data uart1_data = {
	.use_dma_tx	= 1,
	.use_dma_rx	= 1,
};

static u64 uart1_dmamask = DMA_BIT_MASK(32);

static struct platform_device at91sam9rl_uart1_device = {
	.name		= "atmel_usart",
	.id		= 2,
	.dev		= {
				.dma_mask		= &uart1_dmamask,
				.coherent_dma_mask	= DMA_BIT_MASK(32),
				.platform_data		= &uart1_data,
	},
	.resource	= uart1_resources,
	.num_resources	= ARRAY_SIZE(uart1_resources),
};

static inline void configure_usart1_pins(void)
{
	at91_set_A_periph(AT91_PIN_PA11, 1);		/* TXD1 */
	at91_set_A_periph(AT91_PIN_PA12, 0);		/* RXD1 */
}

static struct resource uart2_resources[] = {
	[0] = {
		.start	= AT91SAM9RL_BASE_US2,
		.end	= AT91SAM9RL_BASE_US2 + SZ_16K - 1,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= AT91SAM9RL_ID_US2,
		.end	= AT91SAM9RL_ID_US2,
		.flags	= IORESOURCE_IRQ,
	},
};

static struct atmel_uart_data uart2_data = {
	.use_dma_tx	= 1,
	.use_dma_rx	= 1,
};

static u64 uart2_dmamask = DMA_BIT_MASK(32);

static struct platform_device at91sam9rl_uart2_device = {
	.name		= "atmel_usart",
	.id		= 3,
	.dev		= {
				.dma_mask		= &uart2_dmamask,
				.coherent_dma_mask	= DMA_BIT_MASK(32),
				.platform_data		= &uart2_data,
	},
	.resource	= uart2_resources,
	.num_resources	= ARRAY_SIZE(uart2_resources),
};

static inline void configure_usart2_pins(void)
{
	at91_set_A_periph(AT91_PIN_PA13, 1);		/* TXD2 */
	at91_set_A_periph(AT91_PIN_PA14, 0);		/* RXD2 */
}

static struct resource uart3_resources[] = {
	[0] = {
		.start	= AT91SAM9RL_BASE_US3,
		.end	= AT91SAM9RL_BASE_US3 + SZ_16K - 1,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= AT91SAM9RL_ID_US3,
		.end	= AT91SAM9RL_ID_US3,
		.flags	= IORESOURCE_IRQ,
	},
};

static struct atmel_uart_data uart3_data = {
	.use_dma_tx	= 1,
	.use_dma_rx	= 1,
};

static u64 uart3_dmamask = DMA_BIT_MASK(32);

static struct platform_device at91sam9rl_uart3_device = {
	.name		= "atmel_usart",
	.id		= 4,
	.dev		= {
				.dma_mask		= &uart3_dmamask,
				.coherent_dma_mask	= DMA_BIT_MASK(32),
				.platform_data		= &uart3_data,
	},
	.resource	= uart3_resources,
	.num_resources	= ARRAY_SIZE(uart3_resources),
};

static inline void configure_usart3_pins(void)
{
	at91_set_A_periph(AT91_PIN_PB0, 1);		/* TXD3 */
	at91_set_A_periph(AT91_PIN_PB1, 0);		/* RXD3 */
}

static struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
struct platform_device *atmel_default_console_device;	/* the serial console device */

void __init at91_init_serial(struct at91_uart_config *config)
{
	int i;

	/* Fill in list of supported UARTs */
	for (i = 0; i < config->nr_tty; i++) {
		switch (config->tty_map[i]) {
			case 0:
				configure_usart0_pins();
				at91_uarts[i] = &at91sam9rl_uart0_device;
				at91_clock_associate("usart0_clk", &at91sam9rl_uart0_device.dev, "usart");
				break;
			case 1:
				configure_usart1_pins();
				at91_uarts[i] = &at91sam9rl_uart1_device;
				at91_clock_associate("usart1_clk", &at91sam9rl_uart1_device.dev, "usart");
				break;
			case 2:
				configure_usart2_pins();
				at91_uarts[i] = &at91sam9rl_uart2_device;
				at91_clock_associate("usart2_clk", &at91sam9rl_uart2_device.dev, "usart");
				break;
			case 3:
				configure_usart3_pins();
				at91_uarts[i] = &at91sam9rl_uart3_device;
				at91_clock_associate("usart3_clk", &at91sam9rl_uart3_device.dev, "usart");
				break;
			case 4:
				configure_dbgu_pins();
				at91_uarts[i] = &at91sam9rl_dbgu_device;
				at91_clock_associate("mck", &at91sam9rl_dbgu_device.dev, "usart");
				break;
			default:
				continue;
		}
		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
	}

	/* Set serial console device */
	if (config->console_tty < ATMEL_MAX_UART)
		atmel_default_console_device = at91_uarts[config->console_tty];
	if (!atmel_default_console_device)
		printk(KERN_INFO "AT91: No default serial console defined.\n");
}

void __init at91_add_device_serial(void)
{
	int i;

	for (i = 0; i < ATMEL_MAX_UART; i++) {
		if (at91_uarts[i])
			platform_device_register(at91_uarts[i]);
	}
}
#else
void __init at91_init_serial(struct at91_uart_config *config) {}
void __init at91_add_device_serial(void) {}
#endif


/* -------------------------------------------------------------------- */

/*
 * These devices are always present and don't need any board-specific
 * setup.
 */
static int __init at91_add_standard_devices(void)
{
	at91_add_device_rtc();
	at91_add_device_rtt();
	at91_add_device_watchdog();
	return 0;
}

arch_initcall(at91_add_standard_devices);