- 24 9月, 2022 1 次提交
-
-
由 taiexinleni 提交于
bsp\stm32\libraries\HAL_Drivers\drv_rtc.c在STM32F10x上有一个“RTC首次上电时BKP时钟没使能”的问题。 STM32F10x要求: 写RTC Domain and RTC registers之前需要__HAL_RCC_BKP_CLK_ENABLE(详见:stm32f1xx_hal_rtc.c里面的##### Backup Domain Access #####) 问题分析: 1、RTC首次上电时:由于HAL_RTC_Init初始化之前没有使能BKP时钟,所以对RTC registers的初始化无效。 2、然后用date命令设置时间,调用到set_rtc_time_stamp也没有__HAL_RCC_BKP_CLK_ENABLE,所以HAL_RTCEx_BKUPWrite写的值无法真正永存于BKP,重启后就丢失。 最终导致:对于RTC首次上电的情况,每次重启后RTC_BKP_DR1里的值都不是BKUP_REG_DATA,导致永远无法调用到rt_rtc_f1_bkp_update()去使能BKP时钟。 解决办法: 参考STM32F10x_StdPeriph_Lib_V3.5.0\Project\STM32F10x_StdPeriph_Examples\RTC\Calendar\main.c里面的RTC_Configuration()同时打开RCC_APB1Periph_PWR和RCC_APB1Periph_BKP
-
- 23 9月, 2022 4 次提交
-
-
由 Thomas_Fly 提交于
* fix project to AC6 * add the segger_rtt function * move Kconfig
-
由 hg0720 提交于
-
由 Wayne 提交于
* [bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. * Format files. * [usbhost] List keyboard and update driver. * Enlarge to reasonable thread stack size. * Do indent.. * Keep private. Co-authored-by: NWayne Lin <wclin@nuvoton.com>
-
由 mysterywolf 提交于
scons --target=iar --exec-path=xxxx scons --exec-path=xxxx
-
- 22 9月, 2022 2 次提交
-
-
由 BreederBai 提交于
-
由 taiexinleni 提交于
* bsp beaglebone: add IAR template files and fix it's build error ATTENTION: project.* was generated by scons, so I add it to gitignore. rtconfig.py *FLAGS located in "PLATFORM == 'iccarm'" are unverified and maybe wrong. (我只是从STM32里面抄来,然后根据自己的理解改了一下,并没有验证这些参数的正确性, 我也不知道怎么用命令行调用这些参数来编译) * bsp beaglebone: add beaglebone_ram.icf ROM address from uboot_cmd.txt am335x_DDR.icf use 0x82000000, different to uboot_cmd.txt & gcc beaglebone_ram.lds, the difference will easy cause later developer got below error: => go 0x80200000 ## Starting application at 0x80200000 ... undefined instruction pc : [<8200956c>] lr : [<8ff62497>] reloc pc : [<728a956c>] lr : [<80802497>] sp : 8df37358 ip : 00000000 fp : 00000002 r10: 8df4d448 r9 : 8df3feb8 r8 : 8ffd30f8 r7 : 8ff78089 r6 : 00000002 r5 : 80200000 r4 : 8df4d44c r3 : 80200000 r2 : 8df4d44c r1 : 8df4d44c r0 : 00000001 Flags: nzCv IRQs off FIQs on Mode SVC_32 Code: 5dbffcdd bb9bdf7f abf85423 eff1f77f (7ed7daaf) Resetting CPU ... resetting ... * libcpu am335x: context_iar.S rt_hw_context_switch: add thumb mode support IAR new project defualt Processor mode is Thumb, this will cause user easy occur the following error: ... msh />Execption: r00:0x8800aaa8 r01:0x802080c5 r02:0x00000000 r03:0x88009b4c r04:0x00001000 r05:0x00000000 r06:0x00001403 r07:0x00100000 r08:0x00000000 r09:0x00000000 r10:0x0000000a fp :0x0000000a ip :0x65687374 sp :0x00006c6c lr :0x0000008a pc :0x88008be0 cpsr:0x880001bc software interrupt shutdown... (0) assertion failed at function:rt_hw_cpu_shutdown, line number:160 * bsp beaglebone: change IAR template.ewp code use Arm mode Arm mode bin size will bigger than Thumb mode * libcpu am335x: IAR: use rt_hw_cpu_dcache_enable instead of rt_cpu_dcache_enable Reviewer mysterywolf say: 麻烦把rt_cpu_icache_enable 和 rt_cpu_dcache_enable, 统一改成 rt_hw_cpu_icache_enable 和 rt_hw_cpu_dcache_enable rt_hw_cpu_icache_enable 和 rt_hw_cpu_dcache_enable 是其他bsp也是这么命名的 这是个命名统一的函数
-
- 20 9月, 2022 7 次提交
-
-
由 mysterywolf 提交于
-
由 liyangyang 提交于
-
由 wdfk-prog 提交于
* 修改ry命令,已便于自定义保存路径 * modified: components/utilities/ymodem/ry_sy.c
-
由 还_没_想_好 提交于
* [fix] Fix simulator compilation warnings * Update bsp/simulator/rtconfig_project.h Co-authored-by:
Man, Jianting (Meco) <920369182@qq.com>
-
由 Wayne 提交于
Co-authored-by: NWayne Lin <wclin@nuvoton.com>
-
由 liyangyang 提交于
-
由 还_没_想_好 提交于
-
- 19 9月, 2022 4 次提交
-
-
由 hg0720 提交于
-
由 o777788 提交于
-
由 mysterywolf 提交于
* [rtduino][stm32l475-pandora] 重新整理pinout * [rtduino][bluepill] 整理pinout * [rtduino][stm32-f401nucleo]整理pinout * [rtduino][stm32-pandora] 整理pinout * [rtduino][stm32f072]整理pinout
-
由 mysterywolf 提交于
-
- 18 9月, 2022 2 次提交
-
-
由 liyangyang 提交于
-
由 hg0720 提交于
-
- 17 9月, 2022 1 次提交
-
-
由 linshire 提交于
添加了ch32v307的adc驱动,已在ch32v307评估班上对adc1ch5进行了验证,并修改了kconfig以及scons脚本,可以成功编译以及使用
-
- 16 9月, 2022 7 次提交
-
-
由 myshowtogo 提交于
修复字符串比较错误
-
由 charlown 提交于
将__CC_ARM 替换成 __ARMCC_VERSION 用以支持AC6编译,通过gd32f303测试。
-
由 mysterywolf 提交于
-
由 mysterywolf 提交于
* bsp beaglebone: rerun menuconfg * bsp beaglebone: add uart0 support * bsp beaglebone: use uart0 as console * bsp beaglebone: add heap init fix rt_application_init() error: (m != RT_NULL) assertion failed at function:rt_smem_alloc, line number:288 * bsp beaglebone: add mmu & interrupt init must init mmu, otherwise no interrupt is generated, cause scheduler can't work. I don't know why need mmu, just seen: bsp/rockchip/rk3568/driver/board.c * libcpu am335x: reset interrupt controller before init vector I think reset before init is more better AM335X_StarterWare_02_00_01_01\system_config\armv7a\am335x\interrupt.c IntAINTCInit() * bsp beaglebone: full gpio driver support * bsp beaglebone: add tftpboot way to uboot_cmd.txt * bsp beaglebone: optimize am33xx_gpio_hdr, check irqstatus is the last one Co-authored-by:
YangZhongQing <vipox@qq.com>
-
由 mysterywolf 提交于
-
由 Dozingfiretruck 提交于
-
由 mysterywolf 提交于
-
- 15 9月, 2022 2 次提交
-
-
由 o777788 提交于
* [imxrt 1170]add flexspi support * format file * format file * update flexspi serial root clk to 80MHz * format file
-
由 mysterywolf 提交于
* [rtduino][bluepill] update readme
-
- 14 9月, 2022 1 次提交
-
-
由 tangzz98 提交于
-
- 13 9月, 2022 1 次提交
-
-
由 o777788 提交于
* add us delay * formating file
-
- 12 9月, 2022 2 次提交
-
-
由 CaiYiming0503 提交于
-
由 Wayne 提交于
* [bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. * Format files. Co-authored-by: NWayne Lin <wclin@nuvoton.com>
-
- 11 9月, 2022 2 次提交
-
-
由 傻傻的我 提交于
-
由 childerxxx 提交于
-
- 10 9月, 2022 2 次提交
-
-
由 mysterywolf 提交于
Revert "[tools/link-orger]Sort objects before generate building target to get same link-order/map files/BIN files from the same source files." This reverts commit 0cb62113.
-
由 o777788 提交于
* update sdk files * add dcd config * format files * formating file
-
- 09 9月, 2022 2 次提交