Added LCD Touch Int pin to ioconfig. During testing GT911 would not come out...

Added LCD Touch Int pin to ioconfig. During testing GT911 would not come out of reset because INT pin could not be driven low or high.

bsp/imxrt/imxrt1060-nxp-evk/board/board.c

@@ -449,6 +449,9 @@ static void imxrt_lcd_pins_init(void)
     IOMUXC_SetPinMux(
         IOMUXC_GPIO_AD_B0_02_GPIO1_IO02, /* GPIO_AD_B0_02 is configured as GPIO1_IO02 */
         0U);                             /* Software Input On Field: Input Path is determined by functionality */
+    IOMUXC_SetPinMux(
+        IOMUXC_GPIO_AD_B0_11_GPIO1_IO11, /* GPIO_AD_B0_11 is configured as GPIO1_IO11 */
+        0U);                             /* Software Input On Field: Input Path is determined by functionality */
     IOMUXC_SetPinMux(
         IOMUXC_GPIO_B1_15_GPIO2_IO31, /* GPIO_B1_15 is configured as GPIO2_IO31 */
         0U);                          /* Software Input On Field: Input Path is determined by functionality */
@@ -522,6 +525,16 @@ static void imxrt_lcd_pins_init(void)
                                                  Pull / Keep Select Field: Keeper
                                                  Pull Up / Down Config. Field: 100K Ohm Pull Down
                                                  Hyst. Enable Field: Hysteresis Disabled */
+    IOMUXC_SetPinConfig(
+        IOMUXC_GPIO_AD_B0_11_GPIO1_IO11, /* GPIO_AD_B0_11 PAD functional properties : */
+        0x10B0u);                        /* Slew Rate Field: Slow Slew Rate
+                                                 Drive Strength Field: R0/6
+                                                 Speed Field: medium(100MHz)
+                                                 Open Drain Enable Field: Open Drain Disabled
+                                                 Pull / Keep Enable Field: Pull/Keeper Enabled
+                                                 Pull / Keep Select Field: Keeper
+                                                 Pull Up / Down Config. Field: 100K Ohm Pull Down
+                                                 Hyst. Enable Field: Hysteresis Disabled */
     IOMUXC_SetPinConfig(
         IOMUXC_GPIO_B1_15_GPIO2_IO31, /* GPIO_B1_15 PAD functional properties : */
         0x10B0u);                     /* Slew Rate Field: Slow Slew Rate