Skip to content

R
rt-thread

wwsmg1 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 1
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

未验证 提交 ae3c272e 编写于 作者: B Bernard Xiong 提交者： GitHub
浏览文件
操作

Merge pull request #4827 from supperthomas/ble_nano_33 

[bsp/nrf52840] add the bsp support of ble nano 33
上级 212ef0a2 f9a07e40
展开全部 隐藏空白更改
内联 并排
Showing with 1290 addition and 828 deletion
bsp/nrf5x/libraries/drivers/drv_uart.c
浏览文件 @ ae3c272e
......@@ -6,6 +6,7 @@
* Change Logs:
* Date Author Notes
* 2020-04-28 xckhmf Modify for <nrfx>
* 2021-06-26 supperthomas fix rt_hw_uart_init
*
*/
#include <rtdevice.h>
......@@ -236,7 +237,7 @@ static struct rt_uart_ops _uart_ops = {
_uart_getc
};
void rt_hw_uart_init(void)
int rt_hw_uart_init(void)
{
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
......@@ -249,5 +250,5 @@ void rt_hw_uart_init(void)
#endif /* BSP_USING_UART0 */
}
INIT_BOARD_EXPORT(rt_hw_uart_init);
#endif /* BSP_USING_UART */
bsp/nrf5x/libraries/drivers/drv_uart.h
浏览文件 @ ae3c272e
......@@ -13,7 +13,6 @@
// #define USE_UART0_1 0
void rt_hw_uart_init(void);
#endif
bsp/nrf5x/nrf52840/.config
浏览文件 @ ae3c272e
......@@ -3,6 +3,57 @@
# RT-Thread Configuration
#
#
# Hardware Drivers Config
#
CONFIG_SOC_NRF52840=y
CONFIG_SOC_NORDIC=y
CONFIG_BSP_BOARD_PCA_10056=y
# CONFIG_BSP_BOARD_ARDUINO_NANO_33_BLE is not set
#
# Onboard Peripheral Drivers
#
CONFIG_BSP_USING_JLINK_TO_USART=y
CONFIG_RT_BSP_LED_PIN=13
# CONFIG_BSP_USING_QSPI_FLASH is not set
#
# On-chip Peripheral Drivers
#
CONFIG_BSP_USING_GPIO=y
CONFIG_BSP_USING_UART=y
CONFIG_NRFX_USING_UART=y
# CONFIG_NRFX_USING_UARTE is not set
CONFIG_BSP_USING_UART0=y
CONFIG_BSP_UART0_RX_PIN=8
CONFIG_BSP_UART0_TX_PIN=6
# CONFIG_BSP_USING_SAADC is not set
# CONFIG_BSP_USING_I2C is not set
# CONFIG_BSP_USING_SPI is not set
# CONFIG_BSP_USING_PWM is not set
# CONFIG_BSP_USING_WDT is not set
# CONFIG_BSP_USING_ONCHIP_RTC is not set
# CONFIG_BSP_USING_ON_CHIP_FLASH is not set
#
# MCU flash config
#
CONFIG_MCU_FLASH_START_ADDRESS=0x00000000
CONFIG_MCU_FLASH_SIZE_KB=1024
CONFIG_MCU_SRAM_START_ADDRESS=0x20000000
CONFIG_MCU_SRAM_SIZE_KB=256
CONFIG_MCU_FLASH_PAGE_SIZE=0x1000
CONFIG_BLE_STACK_USING_NULL=y
# CONFIG_BSP_USING_SOFTDEVICE is not set
# CONFIG_BSP_USING_NIMBLE is not set
CONFIG_NRFX_CLOCK_ENABLED=1
CONFIG_NRFX_CLOCK_DEFAULT_CONFIG_IRQ_PRIORITY=7
CONFIG_NRFX_CLOCK_CONFIG_LF_SRC=1
CONFIG_NRFX_UART_ENABLED=1
CONFIG_NRFX_UART0_ENABLED=1
CONFIG_NRFX_GPIOTE_ENABLED=1
#
# RT-Thread Kernel
#
......@@ -15,7 +66,7 @@ CONFIG_RT_THREAD_PRIORITY_32=y
# CONFIG_RT_THREAD_PRIORITY_256 is not set
CONFIG_RT_THREAD_PRIORITY_MAX=32
CONFIG_RT_TICK_PER_SECOND=100
CONFIG_RT_USING_OVERFLOW_CHECK=y
# CONFIG_RT_USING_OVERFLOW_CHECK is not set
CONFIG_RT_USING_HOOK=y
CONFIG_RT_USING_IDLE_HOOK=y
CONFIG_RT_IDLE_HOOK_LIST_SIZE=4
......@@ -23,18 +74,13 @@ CONFIG_IDLE_THREAD_STACK_SIZE=256
CONFIG_RT_USING_TIMER_SOFT=y
CONFIG_RT_TIMER_THREAD_PRIO=4
CONFIG_RT_TIMER_THREAD_STACK_SIZE=512
CONFIG_RT_DEBUG=y
# CONFIG_RT_DEBUG_COLOR is not set
# CONFIG_RT_DEBUG_INIT_CONFIG is not set
# CONFIG_RT_DEBUG_THREAD_CONFIG is not set
# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set
# CONFIG_RT_DEBUG_IPC_CONFIG is not set
# CONFIG_RT_DEBUG_TIMER_CONFIG is not set
# CONFIG_RT_DEBUG_IRQ_CONFIG is not set
# CONFIG_RT_DEBUG_MEM_CONFIG is not set
# CONFIG_RT_DEBUG_SLAB_CONFIG is not set
# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set
# CONFIG_RT_DEBUG_MODULE_CONFIG is not set
#
# kservice optimization
#
# CONFIG_RT_KSERVICE_USING_STDLIB is not set
# CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set
# CONFIG_RT_DEBUG is not set
#
# Inter-Thread communication
......@@ -42,8 +88,8 @@ CONFIG_RT_DEBUG=y
CONFIG_RT_USING_SEMAPHORE=y
CONFIG_RT_USING_MUTEX=y
CONFIG_RT_USING_EVENT=y
CONFIG_RT_USING_MAILBOX=y
CONFIG_RT_USING_MESSAGEQUEUE=y
# CONFIG_RT_USING_MAILBOX is not set
# CONFIG_RT_USING_MESSAGEQUEUE is not set
# CONFIG_RT_USING_SIGNALS is not set
#
......@@ -54,6 +100,7 @@ CONFIG_RT_USING_MEMPOOL=y
# CONFIG_RT_USING_NOHEAP is not set
CONFIG_RT_USING_SMALL_MEM=y
# CONFIG_RT_USING_SLAB is not set
# CONFIG_RT_USING_USERHEAP is not set
# CONFIG_RT_USING_MEMTRACE is not set
CONFIG_RT_USING_HEAP=y
......@@ -66,7 +113,7 @@ CONFIG_RT_USING_DEVICE=y
CONFIG_RT_USING_CONSOLE=y
CONFIG_RT_CONSOLEBUF_SIZE=128
CONFIG_RT_CONSOLE_DEVICE_NAME="uart0"
CONFIG_RT_VER_NUM=0x40003
CONFIG_RT_VER_NUM=0x40004
# CONFIG_RT_USING_CPU_FFS is not set
# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set
......@@ -99,7 +146,7 @@ CONFIG_FINSH_CMD_SIZE=80
# CONFIG_FINSH_USING_AUTH is not set
CONFIG_FINSH_USING_MSH=y
CONFIG_FINSH_USING_MSH_DEFAULT=y
CONFIG_FINSH_USING_MSH_ONLY=y
# CONFIG_FINSH_USING_MSH_ONLY is not set
CONFIG_FINSH_ARG_MAX=10
#
......@@ -149,9 +196,9 @@ CONFIG_RT_USING_PIN=y
#
# POSIX layer and C standard library
#
CONFIG_RT_USING_LIBC=y
# CONFIG_RT_USING_LIBC is not set
# CONFIG_RT_USING_PTHREADS is not set
# CONFIG_RT_USING_MODULE is not set
# CONFIG_RT_LIBC_USING_TIME is not set
#
# Network
......@@ -188,6 +235,12 @@ CONFIG_RT_USING_LIBC=y
# CONFIG_RT_USING_RYM is not set
# CONFIG_RT_USING_ULOG is not set
# CONFIG_RT_USING_UTEST is not set
# CONFIG_RT_USING_RT_LINK is not set
#
# RT-Thread Utestcases
#
# CONFIG_RT_USING_UTESTCASES is not set
#
# RT-Thread online packages
......@@ -256,8 +309,6 @@ CONFIG_RT_USING_LIBC=y
# CONFIG_PKG_USING_LIBRWS is not set
# CONFIG_PKG_USING_TCPSERVER is not set
# CONFIG_PKG_USING_PROTOBUF_C is not set
# CONFIG_PKG_USING_ONNX_PARSER is not set
# CONFIG_PKG_USING_ONNX_BACKEND is not set
# CONFIG_PKG_USING_DLT645 is not set
# CONFIG_PKG_USING_QXWZ is not set
# CONFIG_PKG_USING_SMTP_CLIENT is not set
......@@ -271,6 +322,13 @@ CONFIG_RT_USING_LIBC=y
# CONFIG_PKG_USING_PDULIB is not set
# CONFIG_PKG_USING_BTSTACK is not set
# CONFIG_PKG_USING_LORAWAN_ED_STACK is not set
# CONFIG_PKG_USING_WAYZ_IOTKIT is not set
# CONFIG_PKG_USING_MAVLINK is not set
# CONFIG_PKG_USING_RAPIDJSON is not set
# CONFIG_PKG_USING_BSAL is not set
# CONFIG_PKG_USING_AGILE_MODBUS is not set
# CONFIG_PKG_USING_AGILE_FTP is not set
# CONFIG_PKG_USING_EMBEDDEDPROTO is not set
#
# security packages
......@@ -296,7 +354,13 @@ CONFIG_RT_USING_LIBC=y
# CONFIG_PKG_USING_STEMWIN is not set
# CONFIG_PKG_USING_WAVPLAYER is not set
# CONFIG_PKG_USING_TJPGD is not set
# CONFIG_PKG_USING_PDFGEN is not set
# CONFIG_PKG_USING_HELIX is not set
# CONFIG_PKG_USING_AZUREGUIX is not set
# CONFIG_PKG_USING_TOUCHGFX2RTT is not set
# CONFIG_PKG_USING_NUEMWIN is not set
# CONFIG_PKG_USING_MP3PLAYER is not set
# CONFIG_PKG_USING_TINYJPEG is not set
#
# tools packages
......@@ -305,12 +369,16 @@ CONFIG_RT_USING_LIBC=y
# CONFIG_PKG_USING_EASYFLASH is not set
# CONFIG_PKG_USING_EASYLOGGER is not set
# CONFIG_PKG_USING_SYSTEMVIEW is not set
# CONFIG_PKG_USING_SEGGER_RTT is not set
# CONFIG_PKG_USING_RDB is not set
# CONFIG_PKG_USING_QRCODE is not set
# CONFIG_PKG_USING_ULOG_EASYFLASH is not set
# CONFIG_PKG_USING_ULOG_FILE is not set
# CONFIG_PKG_USING_LOGMGR is not set
# CONFIG_PKG_USING_ADBD is not set
# CONFIG_PKG_USING_COREMARK is not set
# CONFIG_PKG_USING_DHRYSTONE is not set
# CONFIG_PKG_USING_MEMORYPERF is not set
# CONFIG_PKG_USING_NR_MICRO_SHELL is not set
# CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set
# CONFIG_PKG_USING_LUNAR_CALENDAR is not set
......@@ -318,14 +386,48 @@ CONFIG_RT_USING_LIBC=y
# CONFIG_PKG_USING_GPS_RMC is not set
# CONFIG_PKG_USING_URLENCODE is not set
# CONFIG_PKG_USING_UMCN is not set
# CONFIG_PKG_USING_LWRB2RTT is not set
# CONFIG_PKG_USING_CPU_USAGE is not set
# CONFIG_PKG_USING_GBK2UTF8 is not set
# CONFIG_PKG_USING_VCONSOLE is not set
# CONFIG_PKG_USING_KDB is not set
# CONFIG_PKG_USING_WAMR is not set
# CONFIG_PKG_USING_MICRO_XRCE_DDS_CLIENT is not set
# CONFIG_PKG_USING_LWLOG is not set
# CONFIG_PKG_USING_ANV_TRACE is not set
# CONFIG_PKG_USING_ANV_MEMLEAK is not set
# CONFIG_PKG_USING_ANV_TESTSUIT is not set
# CONFIG_PKG_USING_ANV_BENCH is not set
# CONFIG_PKG_USING_DEVMEM is not set
# CONFIG_PKG_USING_REGEX is not set
# CONFIG_PKG_USING_MEM_SANDBOX is not set
# CONFIG_PKG_USING_SOLAR_TERMS is not set
# CONFIG_PKG_USING_GAN_ZHI is not set
#
# system packages
#
#
# acceleration: Assembly language or algorithmic acceleration packages
#
# CONFIG_PKG_USING_RT_MEMCPY_CM is not set
# CONFIG_PKG_USING_QFPLIB_M0_FULL is not set
# CONFIG_PKG_USING_QFPLIB_M0_TINY is not set
# CONFIG_PKG_USING_QFPLIB_M3 is not set
#
# Micrium: Micrium software products porting for RT-Thread
#
# CONFIG_PKG_USING_UCOSIII_WRAPPER is not set
# CONFIG_PKG_USING_UCOSII_WRAPPER is not set
# CONFIG_PKG_USING_UC_CRC is not set
# CONFIG_PKG_USING_UC_CLK is not set
# CONFIG_PKG_USING_UC_COMMON is not set
# CONFIG_PKG_USING_UC_MODBUS is not set
# CONFIG_PKG_USING_GUIENGINE is not set
# CONFIG_PKG_USING_CAIRO is not set
# CONFIG_PKG_USING_PIXMAN is not set
# CONFIG_PKG_USING_LWEXT4 is not set
# CONFIG_PKG_USING_PARTITION is not set
# CONFIG_PKG_USING_FAL is not set
# CONFIG_PKG_USING_FLASHDB is not set
......@@ -335,6 +437,9 @@ CONFIG_RT_USING_LIBC=y
# CONFIG_PKG_USING_CMSIS is not set
# CONFIG_PKG_USING_DFS_YAFFS is not set
# CONFIG_PKG_USING_LITTLEFS is not set
# CONFIG_PKG_USING_DFS_JFFS2 is not set
# CONFIG_PKG_USING_DFS_UFFS is not set
# CONFIG_PKG_USING_LWEXT4 is not set
# CONFIG_PKG_USING_THREAD_POOL is not set
# CONFIG_PKG_USING_ROBOTS is not set
# CONFIG_PKG_USING_EV is not set
......@@ -344,11 +449,12 @@ CONFIG_RT_USING_LIBC=y
# CONFIG_PKG_USING_RAMDISK is not set
# CONFIG_PKG_USING_MININI is not set
# CONFIG_PKG_USING_QBOOT is not set
# CONFIG_PKG_USING_UCOSIII_WRAPPER is not set
# CONFIG_PKG_USING_UC_CRC is not set
# CONFIG_PKG_USING_UC_CLK is not set
# CONFIG_PKG_USING_UC_COMMON is not set
# CONFIG_PKG_USING_PPOOL is not set
# CONFIG_PKG_USING_OPENAMP is not set
# CONFIG_PKG_USING_RT_KPRINTF_THREADSAFE is not set
# CONFIG_PKG_USING_LPM is not set
# CONFIG_PKG_USING_TLSF is not set
# CONFIG_PKG_USING_EVENT_RECORDER is not set
#
# peripheral libraries and drivers
......@@ -357,6 +463,7 @@ CONFIG_RT_USING_LIBC=y
# CONFIG_PKG_USING_REALTEK_AMEBA is not set
# CONFIG_PKG_USING_SHT2X is not set
# CONFIG_PKG_USING_SHT3X is not set
# CONFIG_PKG_USING_AS7341 is not set
# CONFIG_PKG_USING_STM32_SDIO is not set
# CONFIG_PKG_USING_ICM20608 is not set
# CONFIG_PKG_USING_U8G2 is not set
......@@ -370,13 +477,12 @@ CONFIG_RT_USING_LIBC=y
# CONFIG_PKG_USING_NRF5X_SDK is not set
CONFIG_PKG_USING_NRFX=y
CONFIG_PKG_NRFX_PATH="/packages/peripherals/nrfx"
CONFIG_PKG_USING_NRFX_V210=y
# CONFIG_PKG_USING_NRFX_LATEST_VERSION is not set
CONFIG_PKG_NRFX_VER="v2.1.0"
# CONFIG_PKG_USING_NRFX_V210 is not set
CONFIG_PKG_USING_NRFX_LATEST_VERSION=y
CONFIG_PKG_NRFX_VER="latest"
# CONFIG_PKG_USING_WM_LIBRARIES is not set
# CONFIG_PKG_USING_KENDRYTE_SDK is not set
# CONFIG_PKG_USING_INFRARED is not set
# CONFIG_PKG_USING_ROSSERIAL is not set
# CONFIG_PKG_USING_AGILE_BUTTON is not set
# CONFIG_PKG_USING_AGILE_LED is not set
# CONFIG_PKG_USING_AT24CXX is not set
......@@ -407,6 +513,35 @@ CONFIG_PKG_NRFX_VER="v2.1.0"
# CONFIG_PKG_USING_WK2124 is not set
# CONFIG_PKG_USING_LY68L6400 is not set
# CONFIG_PKG_USING_DM9051 is not set
# CONFIG_PKG_USING_SSD1306 is not set
# CONFIG_PKG_USING_QKEY is not set
# CONFIG_PKG_USING_RS485 is not set
# CONFIG_PKG_USING_NES is not set
# CONFIG_PKG_USING_VIRTUAL_SENSOR is not set
# CONFIG_PKG_USING_VDEVICE is not set
# CONFIG_PKG_USING_SGM706 is not set
# CONFIG_PKG_USING_STM32WB55_SDK is not set
# CONFIG_PKG_USING_RDA58XX is not set
# CONFIG_PKG_USING_LIBNFC is not set
# CONFIG_PKG_USING_MFOC is not set
# CONFIG_PKG_USING_TMC51XX is not set
# CONFIG_PKG_USING_TCA9534 is not set
# CONFIG_PKG_USING_KOBUKI is not set
# CONFIG_PKG_USING_ROSSERIAL is not set
# CONFIG_PKG_USING_MICRO_ROS is not set
#
# AI packages
#
# CONFIG_PKG_USING_LIBANN is not set
# CONFIG_PKG_USING_NNOM is not set
# CONFIG_PKG_USING_ONNX_BACKEND is not set
# CONFIG_PKG_USING_ONNX_PARSER is not set
# CONFIG_PKG_USING_TENSORFLOWLITEMICRO is not set
# CONFIG_PKG_USING_ELAPACK is not set
# CONFIG_PKG_USING_ULAPACK is not set
# CONFIG_PKG_USING_QUEST is not set
# CONFIG_PKG_USING_NAXOS is not set
#
# miscellaneous packages
......@@ -416,10 +551,12 @@ CONFIG_PKG_NRFX_VER="v2.1.0"
# CONFIG_PKG_USING_FASTLZ is not set
# CONFIG_PKG_USING_MINILZO is not set
# CONFIG_PKG_USING_QUICKLZ is not set
# CONFIG_PKG_USING_LZMA is not set
# CONFIG_PKG_USING_MULTIBUTTON is not set
# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set
# CONFIG_PKG_USING_CANFESTIVAL is not set
# CONFIG_PKG_USING_ZLIB is not set
# CONFIG_PKG_USING_MINIZIP is not set
# CONFIG_PKG_USING_DSTR is not set
# CONFIG_PKG_USING_TINYFRAME is not set
# CONFIG_PKG_USING_KENDRYTE_DEMO is not set
......@@ -436,63 +573,22 @@ CONFIG_PKG_NRFX_VER="v2.1.0"
# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
# CONFIG_PKG_USING_HELLO is not set
# CONFIG_PKG_USING_VI is not set
# CONFIG_PKG_USING_NNOM is not set
# CONFIG_PKG_USING_LIBANN is not set
# CONFIG_PKG_USING_ELAPACK is not set
# CONFIG_PKG_USING_KI is not set
# CONFIG_PKG_USING_ARMv7M_DWT is not set
# CONFIG_PKG_USING_VT100 is not set
# CONFIG_PKG_USING_TETRIS is not set
# CONFIG_PKG_USING_ULAPACK is not set
# CONFIG_PKG_USING_UKAL is not set
# CONFIG_PKG_USING_CRCLIB is not set
# CONFIG_PKG_USING_THREES is not set
# CONFIG_PKG_USING_2048 is not set
# CONFIG_PKG_USING_LWGPS is not set
# CONFIG_PKG_USING_TENSORFLOWLITEMICRO is not set
#
# Hardware Drivers Config
# entertainment: terminal games and other interesting software packages
#
CONFIG_SOC_NRF52840=y
CONFIG_NRFX_CLOCK_ENABLED=1
CONFIG_NRFX_CLOCK_DEFAULT_CONFIG_IRQ_PRIORITY=7
CONFIG_NRFX_CLOCK_CONFIG_LF_SRC=1
CONFIG_SOC_NORDIC=y
#
# Onboard Peripheral Drivers
#
CONFIG_BSP_USING_JLINK_TO_USART=y
# CONFIG_BSP_USING_QSPI_FLASH is not set
#
# On-chip Peripheral Drivers
#
CONFIG_BSP_USING_GPIO=y
CONFIG_NRFX_GPIOTE_ENABLED=1
# CONFIG_BSP_USING_SAADC is not set
# CONFIG_BSP_USING_PWM is not set
CONFIG_BSP_USING_UART=y
CONFIG_NRFX_USING_UART=y
# CONFIG_NRFX_USING_UARTE is not set
CONFIG_NRFX_UART_ENABLED=1
CONFIG_BSP_USING_UART0=y
CONFIG_NRFX_UART0_ENABLED=1
CONFIG_BSP_UART0_RX_PIN=8
CONFIG_BSP_UART0_TX_PIN=6
# CONFIG_BSP_USING_SPI is not set
# CONFIG_BSP_USING_ON_CHIP_FLASH is not set
#
# On-chip flash config
#
CONFIG_MCU_FLASH_START_ADDRESS=0x00000000
CONFIG_MCU_FLASH_SIZE_KB=1024
CONFIG_MCU_SRAM_START_ADDRESS=0x20000000
CONFIG_MCU_SRAM_SIZE_KB=256
CONFIG_MCU_FLASH_PAGE_SIZE=0x1000
# CONFIG_BSP_USING_WDT is not set
# CONFIG_BSP_USING_ONCHIP_RTC is not set
CONFIG_BLE_STACK_USING_NULL=y
# CONFIG_BSP_USING_SOFTDEVICE is not set
# CONFIG_BSP_USING_NIMBLE is not set
# CONFIG_PKG_USING_THREES is not set
# CONFIG_PKG_USING_2048 is not set
# CONFIG_PKG_USING_SNAKE is not set
# CONFIG_PKG_USING_TETRIS is not set
# CONFIG_PKG_USING_DONUT is not set
# CONFIG_PKG_USING_ACLOCK is not set
# CONFIG_PKG_USING_LWGPS is not set
# CONFIG_PKG_USING_STATE_MACHINE is not set
# CONFIG_PKG_USING_MCURSES is not set
# CONFIG_PKG_USING_COWSAY is not set
bsp/nrf5x/nrf52840/.vscode/launch.json 0 → 100644
浏览文件 @ ae3c272e
{
"version": "0.2.0",
"configurations": [
{
"cwd": "${workspaceRoot}",
"executable": "rt-thread.elf",
"name": "Debug MAX",
"request": "launch",
"type": "cortex-debug",
"servertype": "jlink",
"interface": "swd",
"device": "NRF52840_XXAA",
"runToMain": true
},
]
}
\ No newline at end of file
bsp/nrf5x/nrf52840/Kconfig
浏览文件 @ ae3c272e
......@@ -14,8 +14,9 @@ config PKGS_DIR
string
option env="PKGS_ROOT"
default "packages"
source "board/Kconfig"
source "$RTT_DIR/Kconfig"
source "$PKGS_DIR/Kconfig"
source "board/Kconfig"
bsp/nrf5x/nrf52840/README.md
浏览文件 @ ae3c272e
......@@ -2,7 +2,22 @@
## 简介
该文件夹主要存放所有主芯片为nRF52840的板级支持包。目前默认支持的开发板是官方[PCA10056](https://www.nordicsemi.com/Software-and-tools/Development-Kits/nRF52840-DK)
该文件夹主要存放所有主芯片为nRF52840的板级支持包。
目前支持的开发板如下
| 支持开发板型号 | 开发板上外设 | 备注 |
| ------------------------------------------------------------ | --------------------------- | ----------------------------------- |
| [PCA10056](https://www.nordicsemi.com/Software-and-tools/Development-Kits/nRF52840-DK) | QSPI FLASH, 4 button，4 LED | UART0 |
| [ARDUINO NANO 33 BLE](https://store.arduino.cc/usa/nano-33-ble-sense-with-headers) | 3 LED | 需要连接jlink shell采用RTT 方式交互 |
| | | |
相关开发板资料原理图整理在[BSP_BOARD_NRF52840](https://github.com/supperthomas/BSP_BOARD_NRF52840)
选择开发板请使用`menuconfig` -> `Hardware Driver Config` -> `Select Bsp board`
选择对应的开发板
本文主要内容如下：
- 开发板资源介绍
......
bsp/nrf5x/nrf52840/applications/application.c
浏览文件 @ ae3c272e
......@@ -6,25 +6,24 @@
* Change Logs:
* Date Author Notes
* 2020-04-29 supperthomas first version
* 2021-06-26 supperthomas fix led
*
*/
#include <rtthread.h>
#include <rtdevice.h>
#define DK_BOARD_LED_1 13
#define DK_BOARD_LED_2 14
int main(void)
{
int count = 1;
rt_pin_mode(DK_BOARD_LED_1, PIN_MODE_OUTPUT);
rt_pin_mode(RT_BSP_LED_PIN, PIN_MODE_OUTPUT);
while (count++)
{
rt_pin_write(DK_BOARD_LED_1, PIN_HIGH);
rt_pin_write(RT_BSP_LED_PIN, PIN_HIGH);
rt_thread_mdelay(500);
rt_pin_write(DK_BOARD_LED_1, PIN_LOW);
rt_pin_write(RT_BSP_LED_PIN, PIN_LOW);
rt_thread_mdelay(500);
}
return RT_EOK;
......
bsp/nrf5x/nrf52840/board/Kconfig
浏览文件 @ ae3c272e
......@@ -2,37 +2,45 @@ menu "Hardware Drivers Config"
config SOC_NRF52840
bool
config SOC_NRF52840
select RT_USING_COMPONENTS_INIT
select RT_USING_USER_MAIN
default y
config NRFX_CLOCK_ENABLED
int
default 1
config NRFX_CLOCK_DEFAULT_CONFIG_IRQ_PRIORITY
int
default 7
config NRFX_CLOCK_CONFIG_LF_SRC
int
default 1
config SOC_NORDIC
bool
config SOC_NORDIC
default y
choice
prompt "Select BSP board "
default BSP_BOARD_PCA_10056
config BSP_BOARD_PCA_10056
select BSP_USING_UART
select BSP_USING_UART0
bool "NRF52840 pca10056 "
config BSP_BOARD_ARDUINO_NANO_33_BLE
bool "Arduino Nano 33 BLE (Sense)"
endchoice
menu "Onboard Peripheral Drivers"
config BSP_USING_JLINK_TO_USART
bool "Enable JLINK TO USART (uart0|RX_PIN:8|TX_PIN:6)"
select BSP_USING_UART
select BSP_USING_UART0
default y
depends on BSP_BOARD_PCA_10056
config RT_BSP_LED_PIN
int
default 13 if BSP_BOARD_PCA_10056
default 16 if BSP_BOARD_ARDUINO_NANO_33_BLE
depends on BSP_USING_GPIO
menuconfig BSP_USING_QSPI_FLASH
select PKG_USING_FAL
bool "Enable QSPI FLASH(MX25R64 8MB)"
default n
depends on BSP_BOARD_PCA_10056
if BSP_USING_QSPI_FLASH
config NRFX_QSPI_ENABLED
......@@ -68,135 +76,17 @@ menu "Onboard Peripheral Drivers"
endif
endmenu
menu "On-chip Peripheral Drivers"
config BSP_USING_GPIO
bool "Enable GPIO"
select RT_USING_PIN
default y
if BSP_USING_GPIO
config NRFX_GPIOTE_ENABLED
int
default 1
endif
config BSP_USING_SAADC
bool "Enable SAADC"
select RT_USING_ADC
default n
if BSP_USING_SAADC
config NRFX_SAADC_ENABLED
int
default 1
endif
menuconfig BSP_USING_PWM
bool "Enable PWM"
select RT_USING_PWM
default n
if BSP_USING_PWM
config NRFX_PWM_ENABLED
int
default 1
config BSP_USING_PWM0
bool "Enable PWM0 bus"
default y
if BSP_USING_PWM0
config NRFX_PWM0_ENABLED
int
default 1
config BSP_USING_PWM0_CH0
int "PWM0 channel 0 pin number set"
range 0 47
default 13
config BSP_USING_PWM0_CH1
int "PWM0 channel 1 pin number set"
range 0 47
default 14
config BSP_USING_PWM0_CH2
int "PWM0 channel 2 pin number set"
range 0 47
default 15
config BSP_USING_PWM0_CH3
int "PWM0 channel 3 pin number set"
range 0 47
default 16
endif
config BSP_USING_PWM1
bool "Enable PWM1 bus"
default n
if BSP_USING_PWM1
config NRFX_PWM1_ENABLED
int
default 1
config BSP_USING_PWM1_CH0
int "PWM1 channel 0 pin number set"
range 0 47
default 13
config BSP_USING_PWM1_CH1
int "PWM1 channel 1 pin number set"
range 0 47
default 14
config BSP_USING_PWM1_CH2
int "PWM1 channel 2 pin number set"
range 0 47
default 15
config BSP_USING_PWM1_CH3
int "PWM1 channel 3 pin number set"
range 0 47
default 16
endif
config BSP_USING_PWM2
bool "Enable PWM2 bus"
default n
if BSP_USING_PWM2
config NRFX_PWM2_ENABLED
int
default 1
config BSP_USING_PWM2_CH0
int "PWM2 channel 0 pin number set"
range 0 47
default 13
config BSP_USING_PWM2_CH1
int "PWM2 channel 1 pin number set"
range 0 47
default 14
config BSP_USING_PWM2_CH2
int "PWM2 channel 2 pin number set"
range 0 47
default 15
config BSP_USING_PWM2_CH3
int "PWM2 channel 3 pin number set"
range 0 47
default 16
endif
config BSP_USING_PWM3
bool "Enable PWM3 bus"
default n
if BSP_USING_PWM3
config NRFX_PWM3_ENABLED
int
default 1
config BSP_USING_PWM3_CH0
int "PWM3 channel 0 pin number set"
range 0 47
default 13
config BSP_USING_PWM3_CH1
int "PWM3 channel 1 pin number set"
range 0 47
default 14
config BSP_USING_PWM3_CH2
int "PWM3 channel 2 pin number set"
range 0 47
default 15
config BSP_USING_PWM3_CH3
int "PWM3 channel 3 pin number set"
range 0 47
default 16
endif
endif
config BSP_USING_UART
bool "Enable UART"
default y
default n
select RT_USING_SERIAL
if BSP_USING_UART
choice
......@@ -212,17 +102,10 @@ menu "On-chip Peripheral Drivers"
endchoice
endif
if BSP_USING_UART&&NRFX_USING_UART
config NRFX_UART_ENABLED
int
default 1
config BSP_USING_UART0
bool "Enable UART0"
default y
if BSP_USING_UART0
config NRFX_UART0_ENABLED
int
default 1
config BSP_UART0_RX_PIN
int "uart0 rx pin number"
range 0 31
......@@ -271,21 +154,21 @@ menu "On-chip Peripheral Drivers"
default 5
endif
endif
config BSP_USING_I2C
config BSP_USING_SAADC
bool "Enable ADC"
select RT_USING_ADC
default n
menuconfig BSP_USING_I2C
bool "Enable I2C"
select RT_USING_I2C
default n
if BSP_USING_I2C
config NRFX_TWIM_ENABLED
int
default 1
config BSP_USING_I2C0
bool "Enable I2C0 bus"
default n
default y
if BSP_USING_I2C0
config NRFX_TWIM0_ENABLED
int
default 1
config BSP_I2C0_SCL_PIN
int "i2c0 scl pin number"
range 0 31
......@@ -299,9 +182,6 @@ menu "On-chip Peripheral Drivers"
bool "Enable I2C1 bus"
default n
if BSP_USING_I2C1
config NRFX_TWIM1_ENABLED
int
default 1
config BSP_I2C1_SCL_PIN
int "i2c1 scl pin number"
range 0 31
......@@ -312,15 +192,13 @@ menu "On-chip Peripheral Drivers"
default 2
endif
endif
config BSP_USING_SPI
menuconfig BSP_USING_SPI
bool "Enable SPI"
select RT_USING_SPI
default n
if BSP_USING_SPI
config NRFX_SPI_ENABLED
int
default 1
config BSP_USING_SPI0
bool "Enable SPI0 bus"
default y
......@@ -350,9 +228,6 @@ menu "On-chip Peripheral Drivers"
bool "Enable SPI1 bus"
default n
if BSP_USING_SPI1
config NRFX_SPI1_ENABLED
int "Enable SPI1 instance"
default 1
config BSP_SPI1_SCK_PIN
int "SPI0 sck pin number set"
range 0 47
......@@ -375,9 +250,6 @@ menu "On-chip Peripheral Drivers"
bool "Enable SPI2 bus"
default n
if BSP_USING_SPI2
config NRFX_SPI2_ENABLED
int "Enable SPI2 instance"
default 1
config BSP_SPI2_SCK_PIN
int "SPI0 sck pin number set"
range 0 47
......@@ -397,12 +269,119 @@ menu "On-chip Peripheral Drivers"
endif
endif
menuconfig BSP_USING_PWM
bool "Enable PWM"
select RT_USING_PWM
default n
if BSP_USING_PWM
config BSP_USING_PWM0
bool "Enable PWM0 bus"
default y
if BSP_USING_PWM0
config BSP_USING_PWM0_CH0
int "PWM0 channel 0 pin number set"
range 0 47
default 13
config BSP_USING_PWM0_CH1
int "PWM0 channel 1 pin number set"
range 0 47
default 14
config BSP_USING_PWM0_CH2
int "PWM0 channel 2 pin number set"
range 0 47
default 15
config BSP_USING_PWM0_CH3
int "PWM0 channel 3 pin number set"
range 0 47
default 16
endif
config BSP_USING_PWM1
bool "Enable PWM1 bus"
default n
if BSP_USING_PWM1
config NRFX_PWM1_ENABLED
int
default 1
config BSP_USING_PWM1_CH0
int "PWM1 channel 0 pin number set"
range 0 47
default 13
config BSP_USING_PWM1_CH1
int "PWM1 channel 1 pin number set"
range 0 47
default 14
config BSP_USING_PWM1_CH2
int "PWM1 channel 2 pin number set"
range 0 47
default 15
config BSP_USING_PWM1_CH3
int "PWM1 channel 3 pin number set"
range 0 47
default 16
endif
config BSP_USING_PWM2
bool "Enable PWM2 bus"
default n
if BSP_USING_PWM2
config BSP_USING_PWM2_CH0
int "PWM2 channel 0 pin number set"
range 0 47
default 13
config BSP_USING_PWM2_CH1
int "PWM2 channel 1 pin number set"
range 0 47
default 14
config BSP_USING_PWM2_CH2
int "PWM2 channel 2 pin number set"
range 0 47
default 15
config BSP_USING_PWM2_CH3
int "PWM2 channel 3 pin number set"
range 0 47
default 16
endif
config BSP_USING_PWM3
bool "Enable PWM3 bus"
default n
if BSP_USING_PWM3
config BSP_USING_PWM3_CH0
int "PWM3 channel 0 pin number set"
range 0 47
default 13
config BSP_USING_PWM3_CH1
int "PWM3 channel 1 pin number set"
range 0 47
default 14
config BSP_USING_PWM3_CH2
int "PWM3 channel 2 pin number set"
range 0 47
default 15
config BSP_USING_PWM3_CH3
int "PWM3 channel 3 pin number set"
range 0 47
default 16
endif
endif
config BSP_USING_WDT
bool "Enable WDT"
select RT_USING_WDT
default n
menuconfig BSP_USING_ONCHIP_RTC
bool "Enable RTC"
select RT_USING_RTC
select RT_USING_LIBC
default n
config BSP_USING_ON_CHIP_FLASH
select PKG_USING_FAL
bool "Enable on-chip FLASH"
default n
menu "On-chip flash config"
menu "MCU flash config"
config MCU_FLASH_START_ADDRESS
hex "MCU FLASH START ADDRESS"
......@@ -410,71 +389,20 @@ menu "On-chip Peripheral Drivers"
config MCU_FLASH_SIZE_KB
int "MCU FLASH SIZE, MAX size 1024 KB"
range 1 1024
default 1024
default 1024
config MCU_SRAM_START_ADDRESS
hex "MCU RAM START ADDRESS"
default 0x20000000
config MCU_SRAM_SIZE_KB
int "MCU RAM SIZE, MAX size 256 KB"
range 1 256
config MCU_SRAM_SIZE_KB
int "MCU RAM SIZE"
default 256
config MCU_FLASH_PAGE_SIZE
hex "MCU FLASH PAGE SIZE, please not change,nrfx default is 0x1000"
range 0x1000 0x1000
default 0x1000
endmenu
config BSP_USING_WDT
bool "Enable WDT"
select RT_USING_WDT
default n
if BSP_USING_WDT
config NRFX_WDT_ENABLED
int
default 1
config NRFX_WDT0_ENABLED
int
default 1
config NRFX_WDT_CONFIG_NO_IRQ
int
default 1
endif
menuconfig BSP_USING_ONCHIP_RTC
bool "Enable RTC"
select RT_USING_RTC
select RT_USING_LIBC
default n
if BSP_USING_ONCHIP_RTC
config NRFX_CLOCK_ENABLED
int
default 1
config NRFX_CLOCK_DEFAULT_CONFIG_IRQ_PRIORITY
int
default 7
config NRFX_RTC_ENABLED
int
default 1
config NRFX_RTC0_ENABLED
int
default 1
config NRFX_RTC1_ENABLED
int
default 1
config NRFX_RTC2_ENABLED
int
default 1
config RTC_INSTANCE_ID
int
default 2
config RTC_INSTANCE_ID
int "select RTC instance id, must be 0, 1, 2"
range 0 2
default 2
endif
endmenu
......@@ -497,6 +425,166 @@ config BSP_USING_NIMBLE
bool "use nimble stack(iot)"
endchoice
if SOC_NORDIC
config NRFX_CLOCK_ENABLED
int
default 1
config NRFX_CLOCK_DEFAULT_CONFIG_IRQ_PRIORITY
int
default 7
config NRFX_CLOCK_CONFIG_LF_SRC
int
default 1
endif
if BSP_USING_UART
config NRFX_USING_UART
bool
default y
config NRFX_UART_ENABLED
int
default 1
if BSP_USING_UART0
config NRFX_UART0_ENABLED
int
default 1
endif
if NRFX_USING_UART
config NRFX_UART_ENABLED
int
default 1
endif
if NRFX_USING_UARTE
config NRFX_UARTE0_ENABLED
int
default 1
endif
endif
if BSP_USING_GPIO
config NRFX_GPIOTE_ENABLED
int
default 1
endif
if BSP_USING_SAADC
config NRFX_SAADC_ENABLED
int
default 1
endif
if BSP_USING_I2C
config NRFX_TWIM_ENABLED
int
default 1
if BSP_USING_I2C0
config NRFX_TWIM0_ENABLED
int
default 1
endif
if BSP_USING_I2C1
config NRFX_TWIM1_ENABLED
int
default 1
endif
endif
if BSP_USING_SPI
config NRFX_SPI_ENABLED
int
default 1
if BSP_USING_SPI0
config NRFX_SPI0_ENABLED
int
default 1
endif
if BSP_USING_SPI1
config NRFX_SPI1_ENABLED
int
default 1
endif
if BSP_USING_SPI2
config NRFX_SPI2_ENABLED
int
default 1
endif
endif
if BSP_USING_PWM
config NRFX_PWM_ENABLED
int
default 1
if BSP_USING_PWM0
config NRFX_PWM0_ENABLED
int
default 1
endif
if BSP_USING_PWM1
config NRFX_PWM1_ENABLED
int
default 1
endif
if BSP_USING_PWM2
config NRFX_PWM2_ENABLED
int
default 1
endif
if BSP_USING_PWM3
config NRFX_PWM3_ENABLED
int
default 1
endif
endif
if BSP_USING_WDT
config NRFX_WDT_ENABLED
int
default 1
config NRFX_WDT0_ENABLED
int
default 1
config NRFX_WDT_CONFIG_NO_IRQ
int
default 1
endif
if BSP_USING_ONCHIP_RTC
config NRFX_CLOCK_ENABLED
int
default 1
config NRFX_CLOCK_DEFAULT_CONFIG_IRQ_PRIORITY
int
default 7
config NRFX_RTC_ENABLED
int
default 1
config NRFX_RTC0_ENABLED
int
default 1
config NRFX_RTC1_ENABLED
int
default 1
config NRFX_RTC2_ENABLED
int
default 1
config RTC_INSTANCE_ID
int
default 2
config RTC_INSTANCE_ID
int
range 0 2
default 2
endif
endmenu
......
bsp/nrf5x/nrf52840/board/SConscript
浏览文件 @ ae3c272e
......@@ -5,7 +5,6 @@ from building import *
cwd = GetCurrentDir()
src = Glob('*.c')
CPPPATH = [cwd]
define = ['USE_APP_CONFIG']
group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH,CPPDEFINES = define)
group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
Return('group')
bsp/nrf5x/nrf52840/board/app_config.h 已删除 100644 → 0
浏览文件 @ 212ef0a2
#ifndef APP_CONFIG_H
#define APP_CONFIG_H
#endif //APP_CONFIG_H
bsp/nrf5x/nrf52840/board/board.c
浏览文件 @ ae3c272e
......@@ -6,6 +6,7 @@
* Change Logs:
* Date Author Notes
* 2020-04-29 supperthomas first version
* 2020-04-29 supperthomas fix component init
*
*/
#include <rtthread.h>
......@@ -60,17 +61,14 @@ void rt_hw_board_init(void)
rt_system_heap_init((void *)HEAP_BEGIN, (void *)HEAP_END);
#endif
#ifdef RT_USING_SERIAL
rt_hw_uart_init();
#ifdef RT_USING_COMPONENTS_INIT
rt_components_board_init();
#endif
#ifdef RT_USING_CONSOLE
rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
#endif
#ifdef RT_USING_COMPONENTS_INIT
rt_components_board_init();
#endif
#ifdef BSP_USING_SOFTDEVICE
extern uint32_t Image$$RW_IRAM1$$Base;
......
bsp/nrf5x/nrf52840/board/board.h
浏览文件 @ ae3c272e
/*
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2020-06-19 supperthomas first version
*
*/
#ifndef _BOARD_H_
#define _BOARD_H_
......
bsp/nrf5x/nrf52840/board/linker_scripts/link.lds
浏览文件 @ ae3c272e
......@@ -7,10 +7,153 @@ MEMORY
{
FLASH (rx) : ORIGIN = 0x0, LENGTH = 0x100000
RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x40000
CODE_RAM (rwx) : ORIGIN = 0x800000, LENGTH = 0x10000
}
INCLUDE "packages/nrfx-v2.1.0/mdk/nrf_common.ld"
ENTRY(Reset_Handler)
SECTIONS
{
.text :
{
KEEP(*(.isr_vector))
*(.text*)
KEEP(*(.init))
KEEP(*(.fini))
/* .ctors */
*crtbegin.o(.ctors)
*crtbegin?.o(.ctors)
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
*(SORT(.ctors.*))
*(.ctors)
/* .dtors */
*crtbegin.o(.dtors)
*crtbegin?.o(.dtors)
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
*(SORT(.dtors.*))
*(.dtors)
*(.rodata*)
KEEP(*(.eh_frame*))
/* section information for finsh shell */
. = ALIGN(4);
__fsymtab_start = .;
KEEP(*(FSymTab))
__fsymtab_end = .;
. = ALIGN(4);
__vsymtab_start = .;
KEEP(*(VSymTab))
__vsymtab_end = .;
/* section information for initial. */
. = ALIGN(4);
__rt_init_start = .;
KEEP(*(SORT(.rti_fn*)))
__rt_init_end = .;
. = ALIGN(4);
PROVIDE(__ctors_start__ = .);
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array))
PROVIDE(__ctors_end__ = .);
} > FLASH
.ARM.extab :
{
*(.ARM.extab* .gnu.linkonce.armextab.*)
} > FLASH
__exidx_start = .;
.ARM.exidx :
{
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
} > FLASH
__exidx_end = .;
__etext = .;
.data : AT (__etext)
{
__data_start__ = .;
*(vtable)
*(.data*)
. = ALIGN(4);
/* preinit data */
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP(*(.preinit_array))
PROVIDE_HIDDEN (__preinit_array_end = .);
. = ALIGN(4);
/* init data */
PROVIDE_HIDDEN (__init_array_start = .);
KEEP(*(SORT(.init_array.*)))
KEEP(*(.init_array))
PROVIDE_HIDDEN (__init_array_end = .);
. = ALIGN(4);
/* finit data */
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP(*(SORT(.fini_array.*)))
KEEP(*(.fini_array))
PROVIDE_HIDDEN (__fini_array_end = .);
KEEP(*(.jcr*))
. = ALIGN(4);
/* All data end */
__data_end__ = .;
} > RAM
.bss :
{
. = ALIGN(4);
__bss_start__ = .;
*(.bss*)
*(COMMON)
. = ALIGN(4);
__bss_end__ = .;
} > RAM
.heap (COPY):
{
__HeapBase = .;
__end__ = .;
PROVIDE(end = .);
KEEP(*(.heap*))
__HeapLimit = .;
} > RAM
/* .stack_dummy section doesn't contains any symbols. It is only
* used for linker to calculate size of stack sections, and assign
* values to stack symbols later */
.stack_dummy (COPY):
{
KEEP(*(.stack*))
} > RAM
/* Set stack top to end of RAM, and stack limit move down by
* size of stack_dummy section */
__StackTop = ORIGIN(RAM) + LENGTH(RAM);
__StackLimit = __StackTop - SIZEOF(.stack_dummy);
PROVIDE(__stack = __StackTop);
/* Check if data + heap + stack exceeds RAM limit */
ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
/* Check if text sections + data exceeds FLASH limit */
DataInitFlashUsed = __bss_start__ - __data_start__;
CodeFlashUsed = __etext - ORIGIN(FLASH);
TotalFlashUsed = CodeFlashUsed + DataInitFlashUsed;
ASSERT(TotalFlashUsed <= LENGTH(FLASH), "region FLASH overflowed with .data and user data")
}
bsp/nrf5x/nrf52840/board/sdk_config.h
浏览文件 @ ae3c272e
......@@ -43,9 +43,6 @@
#ifndef SDK_CONFIG_H
#define SDK_CONFIG_H
// <<< Use Configuration Wizard in Context Menu >>>\n
#ifdef USE_APP_CONFIG
#include "app_config.h"
#endif
// <h> nRF_BLE
#include <rtconfig.h>
......
bsp/nrf5x/nrf52840/project.uvoptx
浏览文件 @ ae3c272e
此差异已折叠。
bsp/nrf5x/nrf52840/project.uvprojx
浏览文件 @ ae3c272e
此差异已折叠。
bsp/nrf5x/nrf52840/rtconfig.h
浏览文件 @ ae3c272e
......@@ -4,6 +4,41 @@
/* Automatically generated file; DO NOT EDIT. */
/* RT-Thread Configuration */
/* Hardware Drivers Config */
#define SOC_NRF52840
#define SOC_NORDIC
#define BSP_BOARD_PCA_10056
/* Onboard Peripheral Drivers */
#define BSP_USING_JLINK_TO_USART
#define RT_BSP_LED_PIN 13
/* On-chip Peripheral Drivers */
#define BSP_USING_GPIO
#define BSP_USING_UART
#define NRFX_USING_UART
#define BSP_USING_UART0
#define BSP_UART0_RX_PIN 8
#define BSP_UART0_TX_PIN 6
/* MCU flash config */
#define MCU_FLASH_START_ADDRESS 0x00000000
#define MCU_FLASH_SIZE_KB 1024
#define MCU_SRAM_START_ADDRESS 0x20000000
#define MCU_SRAM_SIZE_KB 256
#define MCU_FLASH_PAGE_SIZE 0x1000
#define BLE_STACK_USING_NULL
#define NRFX_CLOCK_ENABLED 1
#define NRFX_CLOCK_DEFAULT_CONFIG_IRQ_PRIORITY 7
#define NRFX_CLOCK_CONFIG_LF_SRC 1
#define NRFX_UART_ENABLED 1
#define NRFX_UART0_ENABLED 1
#define NRFX_GPIOTE_ENABLED 1
/* RT-Thread Kernel */
#define RT_NAME_MAX 8
......@@ -11,7 +46,6 @@
#define RT_THREAD_PRIORITY_32
#define RT_THREAD_PRIORITY_MAX 32
#define RT_TICK_PER_SECOND 100
#define RT_USING_OVERFLOW_CHECK
#define RT_USING_HOOK
#define RT_USING_IDLE_HOOK
#define RT_IDLE_HOOK_LIST_SIZE 4
......@@ -19,15 +53,15 @@
#define RT_USING_TIMER_SOFT
#define RT_TIMER_THREAD_PRIO 4
#define RT_TIMER_THREAD_STACK_SIZE 512
#define RT_DEBUG
/* kservice optimization */
/* Inter-Thread communication */
#define RT_USING_SEMAPHORE
#define RT_USING_MUTEX
#define RT_USING_EVENT
#define RT_USING_MAILBOX
#define RT_USING_MESSAGEQUEUE
/* Memory Management */
......@@ -41,7 +75,7 @@
#define RT_USING_CONSOLE
#define RT_CONSOLEBUF_SIZE 128
#define RT_CONSOLE_DEVICE_NAME "uart0"
#define RT_VER_NUM 0x40003
#define RT_VER_NUM 0x40004
/* RT-Thread Components */
......@@ -66,7 +100,6 @@
#define FINSH_CMD_SIZE 80
#define FINSH_USING_MSH
#define FINSH_USING_MSH_DEFAULT
#define FINSH_USING_MSH_ONLY
#define FINSH_ARG_MAX 10
/* Device virtual file system */
......@@ -85,7 +118,6 @@
/* POSIX layer and C standard library */
#define RT_USING_LIBC
/* Network */
......@@ -107,6 +139,9 @@
/* Utilities */
/* RT-Thread Utestcases */
/* RT-Thread online packages */
/* IoT - internet of things */
......@@ -137,49 +172,27 @@
/* system packages */
/* acceleration: Assembly language or algorithmic acceleration packages */
/* peripheral libraries and drivers */
#define PKG_USING_NRFX
#define PKG_USING_NRFX_V210
/* Micrium: Micrium software products porting for RT-Thread */
/* miscellaneous packages */
/* peripheral libraries and drivers */
/* samples: kernel and components samples */
#define PKG_USING_NRFX
#define PKG_USING_NRFX_LATEST_VERSION
/* AI packages */
/* Hardware Drivers Config */
#define SOC_NRF52840
#define NRFX_CLOCK_ENABLED 1
#define NRFX_CLOCK_DEFAULT_CONFIG_IRQ_PRIORITY 7
#define NRFX_CLOCK_CONFIG_LF_SRC 1
#define SOC_NORDIC
/* Onboard Peripheral Drivers */
/* miscellaneous packages */
#define BSP_USING_JLINK_TO_USART
/* On-chip Peripheral Drivers */
/* samples: kernel and components samples */
#define BSP_USING_GPIO
#define NRFX_GPIOTE_ENABLED 1
#define BSP_USING_UART
#define NRFX_USING_UART
#define NRFX_UART_ENABLED 1
#define BSP_USING_UART0
#define NRFX_UART0_ENABLED 1
#define BSP_UART0_RX_PIN 8
#define BSP_UART0_TX_PIN 6
/* On-chip flash config */
/* entertainment: terminal games and other interesting software packages */
#define MCU_FLASH_START_ADDRESS 0x00000000
#define MCU_FLASH_SIZE_KB 1024
#define MCU_SRAM_START_ADDRESS 0x20000000
#define MCU_SRAM_SIZE_KB 256
#define MCU_FLASH_PAGE_SIZE 0x1000
#define BLE_STACK_USING_NULL
#endif
bsp/nrf5x/nrf52840/rtconfig.py
浏览文件 @ ae3c272e
......@@ -40,7 +40,7 @@ if PLATFORM == 'gcc':
OBJDUMP = PREFIX + 'objdump'
OBJCPY = PREFIX + 'objcopy'
DEVICE = ' -mcpu=cortex-m4 -mthumb -ffunction-sections -fdata-sections'
DEVICE = ' -mcpu='+CPU + ' -mthumb -ffunction-sections -fdata-sections'
CFLAGS = DEVICE
AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp'
LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rtthread.map,-cref,-u,Reset_Handler -T board/linker_scripts/link.lds'
......
bsp/nrf5x/nrf52840/template.uvoptx
浏览文件 @ ae3c272e
......@@ -10,7 +10,7 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc</tExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
......
bsp/nrf5x/nrf52840/template.uvprojx
浏览文件 @ ae3c272e
......@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>nRF52840_xxAA</Device>
<Vendor>Nordic Semiconductor</Vendor>
<PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.32.1</PackID>
<PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.38.0</PackID>
<PackURL>http://developer.nordicsemi.com/nRF5_SDK/pieces/nRF_DeviceFamilyPack/</PackURL>
<Cpu>IRAM(0x20000000,0x40000) IROM(0x00000000,0x100000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
......@@ -185,6 +185,7 @@
<uocXRam>0</uocXRam>
<RvdsVP>2</RvdsVP>
<RvdsMve>0</RvdsMve>
<RvdsCdeCp>0</RvdsCdeCp>
<hadIRAM2>0</hadIRAM2>
<hadIROM2>0</hadIROM2>
<StupSel>8</StupSel>
......@@ -336,7 +337,7 @@
<v6Rtti>0</v6Rtti>
<VariousControls>
<MiscControls>--reduce_paths</MiscControls>
<Define>BLE_STACK_SUPPORT_REQD NRF_SD_BLE_API_VERSION=4 S140 SOFTDEVICE_PRESENT SWI_DISABLE0 CONFIG_GPIO_AS_PINRESET NRF52 NRF52832_XXAA NRF52_PAN_12 NRF52_PAN_15 NRF52_PAN_20 NRF52_PAN_31 NRF52_PAN_36 NRF52_PAN_51 NRF52_PAN_54 NRF52_PAN_55 NRF52_PAN_58 NRF52_PAN_64 NRF52_PAN_74</Define>
<Define></Define>
<Undefine></Undefine>
<IncludePath></IncludePath>
</VariousControls>
......@@ -351,16 +352,16 @@
<NoWarn>0</NoWarn>
<uSurpInc>0</uSurpInc>
<useXO>0</useXO>
<uClangAs>0</uClangAs>
<ClangAsOpt>4</ClangAsOpt>
<VariousControls>
<MiscControls>--cpreproc_opts=-DBLE_STACK_SUPPORT_REQD,-DNRF_SD_BLE_API_VERSION=4,-DS132,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-DCONFIG_GPIO_AS_PINRESET,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_12,-DNRF52_PAN_15,-DNRF52_PAN_20,-DNRF52_PAN_31,-DNRF52_PAN_36,-DNRF52_PAN_51,-DNRF52_PAN_54,-DNRF52_PAN_55,-DNRF52_PAN_58,-DNRF52_PAN_64,-DNRF52_PAN_74</MiscControls>
<MiscControls></MiscControls>
<Define></Define>
<Undefine></Undefine>
<IncludePath></IncludePath>
</VariousControls>
</Aads>
<LDads>
<umfTarg>1</umfTarg>
<umfTarg>0</umfTarg>
<Ropi>0</Ropi>
<Rwpi>0</Rwpi>
<noStLib>0</noStLib>
......@@ -369,7 +370,7 @@
<TextAddressRange>0x00000000</TextAddressRange>
<DataAddressRange>0x20000000</DataAddressRange>
<pXoBase></pXoBase>
<ScatterFile></ScatterFile>
<ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
<IncludeLibs></IncludeLibs>
<IncludeLibsPath></IncludeLibsPath>
<Misc>--diag_suppress 6330</Misc>
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或