[bsp/stm32] add pm support by cubemx tool

bsp/stm32/libraries/HAL_Drivers/drv_lptim.c

@@ -13,15 +13,6 @@
 
 static LPTIM_HandleTypeDef LptimHandle;
 
-void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef *hlptim)
-{
-    if (hlptim->Instance == LPTIM1)
-    {
-        /* Peripheral clock enable */
-        __HAL_RCC_LPTIM1_CLK_ENABLE();
-    }
-}
-
 void LPTIM1_IRQHandler(void)
 {
     HAL_LPTIM_IRQHandler(&LptimHandle);

bsp/stm32/stm32l475-atk-pandora/board/CubeMX_Config/Inc/stm32l4xx_hal_conf.h

@@ -5,7 +5,7 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
+  * <h2><center>&copy; COPYRIGHT(c) 2020 STMicroelectronics</center></h2>
   *
   * Redistribution and use in source and binary forms, with or without modification,
   * are permitted provided that the following conditions are met:
@@ -69,7 +69,7 @@
 #define HAL_IWDG_MODULE_ENABLED
 /*#define HAL_LTDC_MODULE_ENABLED   */
 /*#define HAL_LCD_MODULE_ENABLED   */
-/*#define HAL_LPTIM_MODULE_ENABLED   */
+#define HAL_LPTIM_MODULE_ENABLED
 /*#define HAL_MMC_MODULE_ENABLED   */
 /*#define HAL_NAND_MODULE_ENABLED   */
 /*#define HAL_NOR_MODULE_ENABLED   */
@@ -77,6 +77,7 @@
 /*#define HAL_OSPI_MODULE_ENABLED   */
 /*#define HAL_OSPI_MODULE_ENABLED   */
 #define HAL_PCD_MODULE_ENABLED
+/*#define HAL_PKA_MODULE_ENABLED   */
 /*#define HAL_QSPI_MODULE_ENABLED   */
 #define HAL_QSPI_MODULE_ENABLED
 /*#define HAL_RNG_MODULE_ENABLED   */
@@ -94,6 +95,7 @@
 /*#define HAL_USART_MODULE_ENABLED   */
 /*#define HAL_WWDG_MODULE_ENABLED   */
 /*#define HAL_EXTI_MODULE_ENABLED   */
+/*#define HAL_PSSI_MODULE_ENABLED   */
 #define HAL_GPIO_MODULE_ENABLED
 #define HAL_EXTI_MODULE_ENABLED 
 #define HAL_I2C_MODULE_ENABLED
@@ -338,6 +340,10 @@
   #include "stm32l4xx_hal_ospi.h"
 #endif /* HAL_OSPI_MODULE_ENABLED */
 
+#ifdef HAL_PKA_MODULE_ENABLED
+  #include "stm32l4xx_hal_pka.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
 #ifdef HAL_PWR_MODULE_ENABLED
   #include "stm32l4xx_hal_pwr.h"
 #endif /* HAL_PWR_MODULE_ENABLED */
@@ -414,6 +420,10 @@
   #include "stm32l4xx_hal_gfxmmu.h"
 #endif /* HAL_GFXMMU_MODULE_ENABLED */
 
+#ifdef HAL_PSSI_MODULE_ENABLED
+  #include "stm32l4xx_hal_pssi.h"
+#endif /* HAL_PSSI_MODULE_ENABLED */
+
 /* Exported macro ------------------------------------------------------------*/
 #ifdef  USE_FULL_ASSERT
 /**
@@ -424,7 +434,7 @@
   *         If expr is true, it returns no value.
   * @retval None
   */
-  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((char *)__FILE__, __LINE__))
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
 /* Exported functions ------------------------------------------------------- */
   void assert_failed(char *file, uint32_t line);
 #else

bsp/stm32/stm32l475-atk-pandora/board/CubeMX_Config/STM32L475VE.ioc

@@ -11,25 +11,26 @@ KeepUserPlacement=false
 Mcu.Family=STM32L4
 Mcu.IP0=ADC1
 Mcu.IP1=IWDG
-Mcu.IP10=SYS
-Mcu.IP11=TIM1
-Mcu.IP12=TIM2
-Mcu.IP13=TIM4
-Mcu.IP14=TIM15
-Mcu.IP15=TIM16
-Mcu.IP16=TIM17
-Mcu.IP17=USART1
-Mcu.IP18=USART2
-Mcu.IP19=USB_OTG_FS
-Mcu.IP2=NVIC
-Mcu.IP3=QUADSPI
-Mcu.IP4=RCC
-Mcu.IP5=RTC
-Mcu.IP6=SAI1
-Mcu.IP7=SPI1
-Mcu.IP8=SPI2
-Mcu.IP9=SPI3
-Mcu.IPNb=20
+Mcu.IP10=SPI3
+Mcu.IP11=SYS
+Mcu.IP12=TIM1
+Mcu.IP13=TIM2
+Mcu.IP14=TIM4
+Mcu.IP15=TIM15
+Mcu.IP16=TIM16
+Mcu.IP17=TIM17
+Mcu.IP18=USART1
+Mcu.IP19=USART2
+Mcu.IP2=LPTIM1
+Mcu.IP20=USB_OTG_FS
+Mcu.IP3=NVIC
+Mcu.IP4=QUADSPI
+Mcu.IP5=RCC
+Mcu.IP6=RTC
+Mcu.IP7=SAI1
+Mcu.IP8=SPI1
+Mcu.IP9=SPI2
+Mcu.IPNb=21
 Mcu.Name=STM32L475V(C-E-G)Tx
 Mcu.Package=LQFP100
 Mcu.Pin0=PE2
@@ -65,30 +66,32 @@ Mcu.Pin35=PB5
 Mcu.Pin36=PB7
 Mcu.Pin37=PB8
 Mcu.Pin38=VP_IWDG_VS_IWDG
-Mcu.Pin39=VP_RTC_VS_RTC_Activate
+Mcu.Pin39=VP_LPTIM1_VS_LPTIM_counterModeInternalClock
 Mcu.Pin4=PE6
-Mcu.Pin40=VP_SAI1_VP_$IpInstance_SAIA_SAI_BASIC
-Mcu.Pin41=VP_SAI1_VP_$IpInstance_SAIB_SAI_BASIC
-Mcu.Pin42=VP_SYS_VS_Systick
-Mcu.Pin43=VP_TIM1_VS_ClockSourceINT
-Mcu.Pin44=VP_TIM2_VS_ClockSourceINT
-Mcu.Pin45=VP_TIM4_VS_ClockSourceINT
-Mcu.Pin46=VP_TIM15_VS_ClockSourceINT
-Mcu.Pin47=VP_TIM16_VS_ClockSourceINT
-Mcu.Pin48=VP_TIM17_VS_ClockSourceINT
+Mcu.Pin40=VP_RTC_VS_RTC_Activate
+Mcu.Pin41=VP_SAI1_VP_$IpInstance_SAIA_SAI_BASIC
+Mcu.Pin42=VP_SAI1_VP_$IpInstance_SAIB_SAI_BASIC
+Mcu.Pin43=VP_SYS_VS_Systick
+Mcu.Pin44=VP_TIM1_VS_ClockSourceINT
+Mcu.Pin45=VP_TIM2_VS_ClockSourceINT
+Mcu.Pin46=VP_TIM4_VS_ClockSourceINT
+Mcu.Pin47=VP_TIM15_VS_ClockSourceINT
+Mcu.Pin48=VP_TIM16_VS_ClockSourceINT
+Mcu.Pin49=VP_TIM17_VS_ClockSourceINT
 Mcu.Pin5=PC14-OSC32_IN (PC14)
 Mcu.Pin6=PC15-OSC32_OUT (PC15)
 Mcu.Pin7=PH0-OSC_IN (PH0)
 Mcu.Pin8=PH1-OSC_OUT (PH1)
 Mcu.Pin9=PA2
-Mcu.PinsNb=49
+Mcu.PinsNb=50
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32L475VETx
-MxCube.Version=5.3.0
-MxDb.Version=DB.5.0.30
+MxCube.Version=5.6.0
+MxDb.Version=DB.5.0.60
 NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.ForceEnableDMAVector=true
 NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
@@ -148,14 +151,6 @@ PC14-OSC32_IN\ (PC14).Signal=RCC_OSC32_IN
 PC15-OSC32_OUT\ (PC15).Mode=LSE-External-Oscillator
 PC15-OSC32_OUT\ (PC15).Signal=RCC_OSC32_OUT
 PC5.Signal=ADCx_IN14
-PCC.Checker=true
-PCC.Line=STM32L4x5
-PCC.MCU=STM32L475V(C-E-G)Tx
-PCC.PartNumber=STM32L475VETx
-PCC.Seq0=0
-PCC.Series=STM32L4
-PCC.Temperature=25
-PCC.Vdd=3.0
 PE10.Mode=Single Bank
 PE10.Signal=QUADSPI_CLK
 PE11.Mode=Single Bank
@@ -194,10 +189,10 @@ ProjectManager.CompilerOptimize=6
 ProjectManager.ComputerToolchain=false
 ProjectManager.CoupleFile=false
 ProjectManager.CustomerFirmwarePackage=
-ProjectManager.DefaultFWLocation=false
+ProjectManager.DefaultFWLocation=true
 ProjectManager.DeletePrevious=true
 ProjectManager.DeviceId=STM32L475VETx
-ProjectManager.FirmwarePackage=STM32Cube FW_L4 V1.14.0
+ProjectManager.FirmwarePackage=STM32Cube FW_L4 V1.15.1
 ProjectManager.FreePins=false
 ProjectManager.HalAssertFull=false
 ProjectManager.HeapSize=0x200
@@ -327,6 +322,8 @@ USB_OTG_FS.IPParameters=VirtualMode
 USB_OTG_FS.VirtualMode=Device_Only
 VP_IWDG_VS_IWDG.Mode=IWDG_Activate
 VP_IWDG_VS_IWDG.Signal=IWDG_VS_IWDG
+VP_LPTIM1_VS_LPTIM_counterModeInternalClock.Mode=Counts__internal_clock_event_00
+VP_LPTIM1_VS_LPTIM_counterModeInternalClock.Signal=LPTIM1_VS_LPTIM_counterModeInternalClock
 VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
 VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate
 VP_SAI1_VP_$IpInstance_SAIA_SAI_BASIC.Mode=SAI_A_BASIC

bsp/stm32/stm32l475-atk-pandora/board/CubeMX_Config/Src/main.c

@@ -66,6 +66,8 @@ ADC_HandleTypeDef hadc1;
 
 IWDG_HandleTypeDef hiwdg;
 
+LPTIM_HandleTypeDef hlptim1;
+
 QSPI_HandleTypeDef hqspi;
 
 RTC_HandleTypeDef hrtc;
@@ -114,6 +116,7 @@ static void MX_SAI1_Init(void);
 static void MX_SPI3_Init(void);
 static void MX_TIM2_Init(void);
 static void MX_USB_OTG_FS_PCD_Init(void);
+static void MX_LPTIM1_Init(void);
 /* USER CODE BEGIN PFP */
 /* Private function prototypes -----------------------------------------------*/
 
@@ -133,7 +136,6 @@ int main(void)
   /* USER CODE BEGIN 1 */
 
   /* USER CODE END 1 */
-  
 
   /* MCU Configuration--------------------------------------------------------*/
 
@@ -170,6 +172,7 @@ int main(void)
   MX_SPI3_Init();
   MX_TIM2_Init();
   MX_USB_OTG_FS_PCD_Init();
+  MX_LPTIM1_Init();
   /* USER CODE BEGIN 2 */
 
   /* USER CODE END 2 */
@@ -233,10 +236,12 @@ void SystemClock_Config(void)
     Error_Handler();
   }
   PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_USART1
-                              |RCC_PERIPHCLK_USART2|RCC_PERIPHCLK_SAI1
-                              |RCC_PERIPHCLK_USB|RCC_PERIPHCLK_ADC;
+                              |RCC_PERIPHCLK_USART2|RCC_PERIPHCLK_LPTIM1
+                              |RCC_PERIPHCLK_SAI1|RCC_PERIPHCLK_USB
+                              |RCC_PERIPHCLK_ADC;
   PeriphClkInit.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK2;
   PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1;
+  PeriphClkInit.Lptim1ClockSelection = RCC_LPTIM1CLKSOURCE_PCLK;
   PeriphClkInit.Sai1ClockSelection = RCC_SAI1CLKSOURCE_PLLSAI1;
   PeriphClkInit.AdcClockSelection = RCC_ADCCLKSOURCE_PLLSAI1;
   PeriphClkInit.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
@@ -291,6 +296,7 @@ static void MX_ADC1_Init(void)
   hadc1.Init.ContinuousConvMode = DISABLE;
   hadc1.Init.NbrOfConversion = 1;
   hadc1.Init.DiscontinuousConvMode = DISABLE;
+  hadc1.Init.NbrOfDiscConversion = 1;
   hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
   hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
   hadc1.Init.DMAContinuousRequests = DISABLE;
@@ -354,6 +360,40 @@ static void MX_IWDG_Init(void)
 
 }
 
+/**
+  * @brief LPTIM1 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_LPTIM1_Init(void)
+{
+
+  /* USER CODE BEGIN LPTIM1_Init 0 */
+
+  /* USER CODE END LPTIM1_Init 0 */
+
+  /* USER CODE BEGIN LPTIM1_Init 1 */
+
+  /* USER CODE END LPTIM1_Init 1 */
+  hlptim1.Instance = LPTIM1;
+  hlptim1.Init.Clock.Source = LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC;
+  hlptim1.Init.Clock.Prescaler = LPTIM_PRESCALER_DIV1;
+  hlptim1.Init.Trigger.Source = LPTIM_TRIGSOURCE_SOFTWARE;
+  hlptim1.Init.OutputPolarity = LPTIM_OUTPUTPOLARITY_HIGH;
+  hlptim1.Init.UpdateMode = LPTIM_UPDATE_IMMEDIATE;
+  hlptim1.Init.CounterSource = LPTIM_COUNTERSOURCE_INTERNAL;
+  hlptim1.Init.Input1Source = LPTIM_INPUT1SOURCE_GPIO;
+  hlptim1.Init.Input2Source = LPTIM_INPUT2SOURCE_GPIO;
+  if (HAL_LPTIM_Init(&hlptim1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN LPTIM1_Init 2 */
+
+  /* USER CODE END LPTIM1_Init 2 */
+
+}
+
 /**
   * @brief QUADSPI Initialization Function
   * @param None
@@ -1055,7 +1095,7 @@ void Error_Handler(void)
   * @param  line: assert_param error line source number
   * @retval None
   */
-void assert_failed(char *file, uint32_t line)
+void assert_failed(uint8_t *file, uint32_t line)
 { 
   /* USER CODE BEGIN 6 */
   /* User can add his own implementation to report the file name and line number,

bsp/stm32/stm32l475-atk-pandora/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c

@@ -160,6 +160,50 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
 
 }
 
+/**
+* @brief LPTIM MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hlptim: LPTIM handle pointer
+* @retval None
+*/
+void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef* hlptim)
+{
+  if(hlptim->Instance==LPTIM1)
+  {
+  /* USER CODE BEGIN LPTIM1_MspInit 0 */
+
+  /* USER CODE END LPTIM1_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_LPTIM1_CLK_ENABLE();
+  /* USER CODE BEGIN LPTIM1_MspInit 1 */
+
+  /* USER CODE END LPTIM1_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief LPTIM MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hlptim: LPTIM handle pointer
+* @retval None
+*/
+void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef* hlptim)
+{
+  if(hlptim->Instance==LPTIM1)
+  {
+  /* USER CODE BEGIN LPTIM1_MspDeInit 0 */
+
+  /* USER CODE END LPTIM1_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_LPTIM1_CLK_DISABLE();
+  /* USER CODE BEGIN LPTIM1_MspDeInit 1 */
+
+  /* USER CODE END LPTIM1_MspDeInit 1 */
+  }
+
+}
+
 /**
 * @brief QSPI MSP Initialization
 * This function configures the hardware resources used in this example
@@ -922,7 +966,6 @@ void HAL_SAI_MspInit(SAI_HandleTypeDef* hsai)
 
 void HAL_SAI_MspDeInit(SAI_HandleTypeDef* hsai)
 {
-
 /* SAI1 */
     if(hsai->Instance==SAI1_Block_A)
     {