Skip to content

R
rt-thread

wwsmg1 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 1
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 61b6fca3 编写于 作者: B Bernard Xiong
浏览文件
操作

[bsp] Update tm4c19x and fix the mb_recv warning in lwip-1.4.1

上级 96e6deac
隐藏空白更改
内联 并排
Showing with 366 addition and 201 deletion
bsp/tm4c129x/.config
浏览文件 @ 61b6fca3
......@@ -7,18 +7,32 @@
# RT-Thread Kernel
#
CONFIG_RT_NAME_MAX=8
# CONFIG_RT_USING_SMP is not set
CONFIG_RT_ALIGN_SIZE=4
# CONFIG_RT_THREAD_PRIORITY_8 is not set
CONFIG_RT_THREAD_PRIORITY_32=y
# CONFIG_RT_THREAD_PRIORITY_256 is not set
CONFIG_RT_THREAD_PRIORITY_MAX=32
CONFIG_RT_TICK_PER_SECOND=100
CONFIG_RT_DEBUG=y
CONFIG_RT_USING_OVERFLOW_CHECK=y
CONFIG_RT_DEBUG_INIT=0
# CONFIG_RT_DEBUG_THREAD is not set
CONFIG_RT_USING_HOOK=y
CONFIG_RT_USING_IDLE_HOOK=y
CONFIG_RT_IDEL_HOOK_LIST_SIZE=4
CONFIG_IDLE_THREAD_STACK_SIZE=256
CONFIG_RT_USING_TIMER_SOFT=y
CONFIG_RT_TIMER_THREAD_PRIO=4
CONFIG_RT_TIMER_THREAD_STACK_SIZE=512
CONFIG_RT_DEBUG=y
# CONFIG_RT_DEBUG_INIT_CONFIG is not set
# CONFIG_RT_DEBUG_THREAD_CONFIG is not set
# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set
# CONFIG_RT_DEBUG_IPC_CONFIG is not set
# CONFIG_RT_DEBUG_TIMER_CONFIG is not set
# CONFIG_RT_DEBUG_IRQ_CONFIG is not set
# CONFIG_RT_DEBUG_MEM_CONFIG is not set
# CONFIG_RT_DEBUG_SLAB_CONFIG is not set
# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set
# CONFIG_RT_DEBUG_MODULE_CONFIG is not set
#
# Inter-Thread communication
......@@ -35,24 +49,32 @@ CONFIG_RT_USING_MESSAGEQUEUE=y
#
CONFIG_RT_USING_MEMPOOL=y
CONFIG_RT_USING_MEMHEAP=y
CONFIG_RT_USING_HEAP=y
# CONFIG_RT_USING_NOHEAP is not set
CONFIG_RT_USING_SMALL_MEM=y
# CONFIG_RT_USING_SLAB is not set
# CONFIG_RT_USING_MEMHEAP_AS_HEAP is not set
# CONFIG_RT_USING_MEMTRACE is not set
CONFIG_RT_USING_HEAP=y
#
# Kernel Device Object
#
CONFIG_RT_USING_DEVICE=y
# CONFIG_RT_USING_DEVICE_OPS is not set
# CONFIG_RT_USING_INTERRUPT_INFO is not set
CONFIG_RT_USING_CONSOLE=y
CONFIG_RT_CONSOLEBUF_SIZE=128
CONFIG_RT_CONSOLE_DEVICE_NAME="uart0"
# CONFIG_RT_USING_MODULE is not set
CONFIG_RT_VER_NUM=0x40000
# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set
#
# RT-Thread Components
#
CONFIG_RT_USING_COMPONENTS_INIT=y
CONFIG_RT_USING_USER_MAIN=y
CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
CONFIG_RT_MAIN_THREAD_PRIORITY=10
#
# C++ features
......@@ -63,9 +85,12 @@ CONFIG_RT_USING_USER_MAIN=y
# Command shell
#
CONFIG_RT_USING_FINSH=y
CONFIG_FINSH_THREAD_NAME="tshell"
CONFIG_FINSH_USING_HISTORY=y
CONFIG_FINSH_HISTORY_LINES=5
CONFIG_FINSH_USING_SYMTAB=y
CONFIG_FINSH_USING_DESCRIPTION=y
# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
CONFIG_FINSH_THREAD_PRIORITY=20
CONFIG_FINSH_THREAD_STACK_SIZE=4096
CONFIG_FINSH_CMD_SIZE=80
......@@ -81,30 +106,51 @@ CONFIG_FINSH_CMD_SIZE=80
# Device Drivers
#
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
# CONFIG_RT_USING_I2C is not set
# CONFIG_RT_USING_PIN is not set
# CONFIG_RT_USING_ADC is not set
# CONFIG_RT_USING_PWM is not set
# CONFIG_RT_USING_MTD_NOR is not set
# CONFIG_RT_USING_MTD_NAND is not set
# CONFIG_RT_USING_MTD is not set
# CONFIG_RT_USING_PM is not set
# CONFIG_RT_USING_RTC is not set
# CONFIG_RT_USING_SDIO is not set
# CONFIG_RT_USING_SPI is not set
# CONFIG_RT_USING_WDT is not set
# CONFIG_RT_USING_AUDIO is not set
#
# Using WiFi
#
# CONFIG_RT_USING_WIFI is not set
#
# Using USB
#
# CONFIG_RT_USING_USB_HOST is not set
# CONFIG_RT_USING_USB_DEVICE is not set
#
# POSIX layer and C standard library
#
# CONFIG_RT_USING_LIBC is not set
CONFIG_RT_USING_LIBC=y
# CONFIG_RT_USING_PTHREADS is not set
#
# Network stack
# Network
#
#
# Socket abstraction layer
#
# CONFIG_RT_USING_SAL is not set
#
# light weight TCP/IP stack
......@@ -112,6 +158,7 @@ CONFIG_RT_SERIAL_USING_DMA=y
CONFIG_RT_USING_LWIP=y
CONFIG_RT_USING_LWIP141=y
# CONFIG_RT_USING_LWIP202 is not set
# CONFIG_RT_USING_LWIP210 is not set
# CONFIG_RT_LWIP_IGMP is not set
CONFIG_RT_LWIP_ICMP=y
# CONFIG_RT_LWIP_SNMP is not set
......@@ -119,7 +166,6 @@ CONFIG_RT_LWIP_DNS=y
CONFIG_RT_LWIP_DHCP=y
CONFIG_IP_SOF_BROADCAST=1
CONFIG_IP_SOF_BROADCAST_RECV=1
# CONFIG_LWIP_USING_DHCPD is not set
#
# Static IPv4 Address
......@@ -131,8 +177,7 @@ CONFIG_RT_LWIP_UDP=y
CONFIG_RT_LWIP_TCP=y
# CONFIG_RT_LWIP_RAW is not set
# CONFIG_RT_LWIP_PPP is not set
# CONFIG_RT_LWIP_PPPOE is not set
# CONFIG_RT_LWIP_PPPOS is not set
CONFIG_RT_MEMP_NUM_NETCONN=8
CONFIG_RT_LWIP_PBUF_NUM=16
CONFIG_RT_LWIP_RAW_PCB_NUM=4
CONFIG_RT_LWIP_UDP_PCB_NUM=4
......@@ -143,6 +188,8 @@ CONFIG_RT_LWIP_TCP_WND=8196
CONFIG_RT_LWIP_TCPTHREAD_PRIORITY=10
CONFIG_RT_LWIP_TCPTHREAD_MBOX_SIZE=8
CONFIG_RT_LWIP_TCPTHREAD_STACKSIZE=1024
# CONFIG_LWIP_NO_RX_THREAD is not set
# CONFIG_LWIP_NO_TX_THREAD is not set
CONFIG_RT_LWIP_ETHTHREAD_PRIORITY=12
CONFIG_RT_LWIP_ETHTHREAD_STACKSIZE=1024
CONFIG_RT_LWIP_ETHTHREAD_MBOX_SIZE=8
......@@ -152,69 +199,188 @@ CONFIG_SO_REUSE=1
CONFIG_LWIP_SO_RCVTIMEO=1
CONFIG_LWIP_SO_SNDTIMEO=1
CONFIG_LWIP_SO_RCVBUF=1
# CONFIG_RT_LWIP_NETIF_LOOPBACK is not set
CONFIG_LWIP_NETIF_LOOPBACK=0
# CONFIG_RT_LWIP_STATS is not set
# CONFIG_RT_LWIP_DEBUG is not set
#
# Modbus master and slave stack
#
# CONFIG_RT_USING_MODBUS is not set
# CONFIG_RT_USING_NETUTILS is not set
#
# RT-Thread UI Engine
# AT commands
#
# CONFIG_PKG_USING_GUIENGINE is not set
# CONFIG_RT_USING_AT is not set
# CONFIG_LWIP_USING_DHCPD is not set
#
# RT-Thread online packages
# VBUS(Virtual Software BUS)
#
# CONFIG_RT_USING_VBUS is not set
#
# system packages
# Utilities
#
# CONFIG_RT_USING_LOGTRACE is not set
# CONFIG_RT_USING_RYM is not set
# CONFIG_RT_USING_ULOG is not set
# CONFIG_RT_USING_UTEST is not set
#
# RT-Thread online packages
#
# CONFIG_PKG_USING_PARTITION is not set
# CONFIG_PKG_USING_SQLITE is not set
#
# IoT - internet of things
#
# CONFIG_PKG_USING_PAHOMQTT is not set
# CONFIG_PKG_USING_WEBCLIENT is not set
# CONFIG_PKG_USING_WEBNET is not set
# CONFIG_PKG_USING_MONGOOSE is not set
# CONFIG_PKG_USING_WEBTERMINAL is not set
# CONFIG_PKG_USING_CJSON is not set
# CONFIG_PKG_USING_JSMN is not set
# CONFIG_PKG_USING_LJSON is not set
# CONFIG_PKG_USING_EZXML is not set
# CONFIG_PKG_USING_NANOPB is not set
#
# Wi-Fi
#
#
# Marvell WiFi
#
# CONFIG_PKG_USING_MARVELLWIFI is not set
# CONFIG_PKG_USING_WLANMARVELL is not set
#
# Wiced WiFi
#
# CONFIG_PKG_USING_WLAN_WICED is not set
# CONFIG_PKG_USING_COAP is not set
# CONFIG_PKG_USING_NOPOLL is not set
# CONFIG_PKG_USING_NETUTILS is not set
# CONFIG_PKG_USING_AT_DEVICE is not set
# CONFIG_PKG_USING_WIZNET is not set
#
# IoT Cloud
#
# CONFIG_PKG_USING_ONENET is not set
# CONFIG_PKG_USING_GAGENT_CLOUD is not set
# CONFIG_PKG_USING_ALI_IOTKIT is not set
# CONFIG_PKG_USING_AZURE is not set
# CONFIG_PKG_USING_TENCENT_IOTKIT is not set
#
# security packages
#
# CONFIG_PKG_USING_MBEDTLS is not set
# CONFIG_PKG_USING_libsodium is not set
# CONFIG_PKG_USING_TINYCRYPT is not set
#
# language packages
#
# CONFIG_PKG_USING_LUA is not set
# CONFIG_PKG_USING_JERRYSCRIPT is not set
# CONFIG_PKG_USING_MICROPYTHON is not set
#
# multimedia packages
#
# CONFIG_PKG_USING_OPENMV is not set
# CONFIG_PKG_USING_MUPDF is not set
#
# tools packages
#
# CONFIG_PKG_USING_CMBACKTRACE is not set
# CONFIG_PKG_USING_EASYFLASH is not set
# CONFIG_PKG_USING_EASYLOGGER is not set
# CONFIG_PKG_USING_SYSTEMVIEW is not set
# CONFIG_PKG_USING_RDB is not set
# CONFIG_PKG_USING_QRCODE is not set
# CONFIG_PKG_USING_ULOG_EASYFLASH is not set
#
# system packages
#
# CONFIG_PKG_USING_GUIENGINE is not set
# CONFIG_PKG_USING_CAIRO is not set
# CONFIG_PKG_USING_PIXMAN is not set
# CONFIG_PKG_USING_LWEXT4 is not set
# CONFIG_PKG_USING_PARTITION is not set
# CONFIG_PKG_USING_FAL is not set
# CONFIG_PKG_USING_SQLITE is not set
# CONFIG_PKG_USING_RTI is not set
# CONFIG_PKG_USING_LITTLEVGL2RTT is not set
# CONFIG_PKG_USING_CMSIS is not set
# CONFIG_PKG_USING_DFS_YAFFS is not set
# CONFIG_PKG_USING_LITTLEFS is not set
#
# peripheral libraries and drivers
#
# CONFIG_PKG_USING_REALTEK_AMEBA is not set
# CONFIG_PKG_USING_SHT2X is not set
# CONFIG_PKG_USING_AHT10 is not set
# CONFIG_PKG_USING_AP3216C is not set
# CONFIG_PKG_USING_STM32_SDIO is not set
# CONFIG_PKG_USING_ICM20608 is not set
# CONFIG_PKG_USING_U8G2 is not set
# CONFIG_PKG_USING_BUTTON is not set
# CONFIG_PKG_USING_MPU6XXX is not set
# CONFIG_PKG_USING_PCF8574 is not set
# CONFIG_PKG_USING_KENDRYTE_SDK is not set
#
# miscellaneous packages
#
# CONFIG_PKG_USING_LIBCSV is not set
# CONFIG_PKG_USING_OPTPARSE is not set
# CONFIG_PKG_USING_FASTLZ is not set
# CONFIG_PKG_USING_MINILZO is not set
# CONFIG_PKG_USING_QUICKLZ is not set
# CONFIG_PKG_USING_MULTIBUTTON is not set
# CONFIG_PKG_USING_CANFESTIVAL is not set
# CONFIG_PKG_USING_ZLIB is not set
# CONFIG_PKG_USING_DSTR is not set
# CONFIG_PKG_USING_TINYFRAME is not set
# CONFIG_PKG_USING_KENDRYTE_DEMO is not set
#
# samples: kernel and components samples
#
# CONFIG_PKG_USING_KERNEL_SAMPLES is not set
# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
# CONFIG_PKG_USING_NETWORK_SAMPLES is not set
# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
# CONFIG_PKG_USING_HELLO is not set
#
# BSP_SPECIAL CONFIG
# Privated Packages of RealThread
#
# CONFIG_PKG_USING_CODEC is not set
# CONFIG_PKG_USING_PLAYER is not set
# CONFIG_PKG_USING_PERSIMMON_SRC is not set
# CONFIG_PKG_USING_JS_PERSIMMON is not set
# CONFIG_PKG_USING_JERRYSCRIPT_WIN32 is not set
#
# Network Utilities
#
# CONFIG_PKG_USING_MDNS is not set
# CONFIG_PKG_USING_UPNP is not set
# CONFIG_PKG_USING_WICED is not set
# CONFIG_PKG_USING_CLOUDSDK is not set
# CONFIG_PKG_USING_COREMARK is not set
# CONFIG_PKG_USING_POWER_MANAGER is not set
# CONFIG_PKG_USING_RT_OTA is not set
# CONFIG_PKG_USING_RDBD_SRC is not set
# CONFIG_PKG_USING_RTINSIGHT is not set
# CONFIG_PKG_USING_SMARTCONFIG is not set
# CONFIG_PKG_USING_RTX is not set
CONFIG_RT_USING_UART0=y
bsp/tm4c129x/drivers/drv_eth.c
浏览文件 @ 61b6fca3
......@@ -248,11 +248,11 @@ volatile uint32_t g_ui32AbnormalInts;
typedef struct
{
/* inherit from ethernet device */
struct eth_device parent;
tStellarisIF* dma_if;
/* for rx_thread async get pbuf */
rt_mailbox_t rx_pbuf_mb;
/* inherit from ethernet device */
struct eth_device parent;
tStellarisIF* dma_if;
/* for rx_thread async get pbuf */
rt_mailbox_t rx_pbuf_mb;
} net_device;
typedef net_device* net_device_t;
......@@ -862,8 +862,8 @@ tivaif_receive(net_device_t dev)
{
#else
//if(tcpip_input(pBuf, psNetif) != RT_EOK)
if((rt_mb_send(dev->rx_pbuf_mb, (rt_uint32_t)pBuf) != RT_EOK) ||
(eth_device_ready(&(dev->parent)) != RT_EOK))
if((rt_mb_send(dev->rx_pbuf_mb, (rt_uint32_t)pBuf) != RT_EOK) ||
(eth_device_ready(&(dev->parent)) != RT_EOK))
{
#endif
/* drop the packet */
......@@ -950,10 +950,10 @@ tivaif_process_phy_interrupt(net_device_t dev)
*/
ui16Val = EMACPHYRead(EMAC0_BASE, PHY_PHYS_ADDR, EPHY_MISR1);
/*
* Dummy read PHY REG EPHY_BMSR, it will force update the EPHY_STS register
*/
EMACPHYRead(EMAC0_BASE, PHY_PHYS_ADDR, EPHY_BMSR);
/*
* Dummy read PHY REG EPHY_BMSR, it will force update the EPHY_STS register
*/
EMACPHYRead(EMAC0_BASE, PHY_PHYS_ADDR, EPHY_BMSR);
/* Read the current PHY status. */
ui16Status = EMACPHYRead(EMAC0_BASE, PHY_PHYS_ADDR, EPHY_STS);
......@@ -968,7 +968,7 @@ tivaif_process_phy_interrupt(net_device_t dev)
netif_set_link_up(psNetif);
#else
//tcpip_callback((tcpip_callback_fn)netif_set_link_up, psNetif);
eth_device_linkchange(&(dev->parent), RT_TRUE);
eth_device_linkchange(&(dev->parent), RT_TRUE);
#endif
/* In this case we drop through since we may need to reconfigure
......@@ -982,7 +982,7 @@ tivaif_process_phy_interrupt(net_device_t dev)
netif_set_link_down(psNetif);
#else
//tcpip_callback((tcpip_callback_fn)netif_set_link_down, psNetif);
eth_device_linkchange(&(dev->parent), RT_FALSE);
eth_device_linkchange(&(dev->parent), RT_FALSE);
#endif
}
}
......@@ -1168,40 +1168,40 @@ void lwIPEthernetIntHandler(void)
// OUI:00-12-37 (hex) Texas Instruments, only for test
static int tiva_eth_mac_addr_init(void)
{
int retVal =0;
uint32_t ulUser[2];
uint8_t mac_addr[6];
MAP_FlashUserGet(&ulUser[0], &ulUser[1]);
if((ulUser[0] == 0xffffffff) || (ulUser[1] == 0xffffffff))
{
rt_kprintf("Fail to get mac address from eeprom.\n");
rt_kprintf("Using default mac address\n");
// OUI:00-12-37 (hex) Texas Instruments, only for test
// Configure the hardware MAC address
ulUser[0] = 0x00371200;
ulUser[1] = 0x00563412;
//FlashUserSet(ulUser0, ulUser1);
retVal =-1;
}
//Convert the 24/24 split MAC address from NV ram into a 32/16 split MAC
//address needed to program the hardware registers, then program the MAC
//address into the Ethernet Controller registers.
mac_addr[0] = ((ulUser[0] >> 0) & 0xff);
mac_addr[1] = ((ulUser[0] >> 8) & 0xff);
mac_addr[2] = ((ulUser[0] >> 16) & 0xff);
mac_addr[3] = ((ulUser[1] >> 0) & 0xff);
mac_addr[4] = ((ulUser[1] >> 8) & 0xff);
mac_addr[5] = ((ulUser[1] >> 16) & 0xff);
//
int retVal =0;
uint32_t ulUser[2];
uint8_t mac_addr[6];
MAP_FlashUserGet(&ulUser[0], &ulUser[1]);
if((ulUser[0] == 0xffffffff) || (ulUser[1] == 0xffffffff))
{
rt_kprintf("Fail to get mac address from eeprom.\n");
rt_kprintf("Using default mac address\n");
// OUI:00-12-37 (hex) Texas Instruments, only for test
// Configure the hardware MAC address
ulUser[0] = 0x00371200;
ulUser[1] = 0x00563412;
//FlashUserSet(ulUser0, ulUser1);
retVal =-1;
}
//Convert the 24/24 split MAC address from NV ram into a 32/16 split MAC
//address needed to program the hardware registers, then program the MAC
//address into the Ethernet Controller registers.
mac_addr[0] = ((ulUser[0] >> 0) & 0xff);
mac_addr[1] = ((ulUser[0] >> 8) & 0xff);
mac_addr[2] = ((ulUser[0] >> 16) & 0xff);
mac_addr[3] = ((ulUser[1] >> 0) & 0xff);
mac_addr[4] = ((ulUser[1] >> 8) & 0xff);
mac_addr[5] = ((ulUser[1] >> 16) & 0xff);
//
// Program the hardware with its MAC address (for filtering).
//
MAP_EMACAddrSet(EMAC0_BASE, 0, mac_addr);
return retVal;
return retVal;
}
void tiva_eth_lowlevel_init(void)
......@@ -1214,7 +1214,7 @@ static int tiva_eth_mac_addr_init(void)
MAP_GPIOPinConfigure(GPIO_PF4_EN0LED1);
GPIOPinTypeEthernetLED(GPIO_PORTF_BASE, GPIO_PIN_0);
GPIOPinTypeEthernetLED(GPIO_PORTF_BASE, GPIO_PIN_4);
//
// Enable the ethernet peripheral.
//
......@@ -1243,7 +1243,7 @@ static int tiva_eth_mac_addr_init(void)
//
// Internal PHY is not present on this part so hang here.
//
rt_kprintf("Internal PHY is not present on this part.\n");
rt_kprintf("Internal PHY is not present on this part.\n");
while(1)
{
}
......@@ -1283,17 +1283,17 @@ static int tiva_eth_mac_addr_init(void)
EMAC_MODE_TX_STORE_FORWARD |
EMAC_MODE_TX_THRESHOLD_64_BYTES |
EMAC_MODE_RX_THRESHOLD_64_BYTES), 0);
EMACIntRegister(EMAC0_BASE, lwIPEthernetIntHandler);
EMACIntRegister(EMAC0_BASE, lwIPEthernetIntHandler);
}
static rt_err_t eth_dev_init(rt_device_t device)
{
net_device_t net_dev = (net_device_t)device;
struct netif *psNetif = (net_dev->parent.netif);
LWIP_ASSERT("psNetif != NULL", (psNetif != NULL));
net_device_t net_dev = (net_device_t)device;
struct netif *psNetif = (net_dev->parent.netif);
LWIP_ASSERT("psNetif != NULL", (psNetif != NULL));
#if LWIP_NETIF_HOSTNAME
/* Initialize interface hostname */
......@@ -1320,91 +1320,91 @@ static rt_err_t eth_dev_init(rt_device_t device)
/* control the interface */
static rt_err_t eth_dev_control(rt_device_t dev, int cmd, void *args)
{
switch(cmd)
{
case NIOCTL_GADDR:
/* get mac address */
if(args)
MAP_EMACAddrGet(EMAC0_BASE, 0, (uint8_t*)args);
else
return -RT_ERROR;
break;
default :
break;
}
return RT_EOK;
switch(cmd)
{
case NIOCTL_GADDR:
/* get mac address */
if(args)
MAP_EMACAddrGet(EMAC0_BASE, 0, (uint8_t*)args);
else
return -RT_ERROR;
break;
default :
break;
}
return RT_EOK;
}
/* Open the interface */
static rt_err_t eth_dev_open(rt_device_t dev, rt_uint16_t oflag)
{
return RT_EOK;
return RT_EOK;
}
/* Close the interface */
static rt_err_t eth_dev_close(rt_device_t dev)
{
return RT_EOK;
return RT_EOK;
}
/* Read */
static rt_size_t eth_dev_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
{
rt_set_errno(-RT_ENOSYS);
return 0;
rt_set_errno(-RT_ENOSYS);
return 0;
}
/* Write */
static rt_size_t eth_dev_write(rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
{
rt_set_errno(-RT_ENOSYS);
return 0;
rt_set_errno(-RT_ENOSYS);
return 0;
}
static rt_err_t eth_dev_tx(rt_device_t dev, struct pbuf *p)
{
return tivaif_transmit((net_device_t)dev, p);
return tivaif_transmit((net_device_t)dev, p);
}
static struct pbuf* eth_dev_rx(rt_device_t dev)
{
rt_err_t result;
rt_uint32_t temp =0;
net_device_t net_dev = (net_device_t)dev;
result = rt_mb_recv(net_dev->rx_pbuf_mb, &temp, RT_WAITING_NO);
return (result == RT_EOK)? (struct pbuf*)temp : RT_NULL;
rt_err_t result;
rt_uint32_t temp =0;
net_device_t net_dev = (net_device_t)dev;
result = rt_mb_recv(net_dev->rx_pbuf_mb, (rt_ubase_t *)&temp, RT_WAITING_NO);
return (result == RT_EOK)? (struct pbuf*)temp : RT_NULL;
}
int rt_hw_tiva_eth_init(void)
{
rt_err_t result;
/* Clock GPIO and etc */
tiva_eth_lowlevel_init();
tiva_eth_mac_addr_init();
/* init rt-thread device interface */
eth_dev->parent.parent.init = eth_dev_init;
eth_dev->parent.parent.open = eth_dev_open;
eth_dev->parent.parent.close = eth_dev_close;
eth_dev->parent.parent.read = eth_dev_read;
eth_dev->parent.parent.write = eth_dev_write;
eth_dev->parent.parent.control = eth_dev_control;
eth_dev->parent.eth_rx = eth_dev_rx;
eth_dev->parent.eth_tx = eth_dev_tx;
result = rt_mb_init(&eth_rx_pbuf_mb, "epbuf",
rt_err_t result;
/* Clock GPIO and etc */
tiva_eth_lowlevel_init();
tiva_eth_mac_addr_init();
/* init rt-thread device interface */
eth_dev->parent.parent.init = eth_dev_init;
eth_dev->parent.parent.open = eth_dev_open;
eth_dev->parent.parent.close = eth_dev_close;
eth_dev->parent.parent.read = eth_dev_read;
eth_dev->parent.parent.write = eth_dev_write;
eth_dev->parent.parent.control = eth_dev_control;
eth_dev->parent.eth_rx = eth_dev_rx;
eth_dev->parent.eth_tx = eth_dev_tx;
result = rt_mb_init(&eth_rx_pbuf_mb, "epbuf",
&rx_pbuf_mb_pool[0], sizeof(rx_pbuf_mb_pool)/4,
RT_IPC_FLAG_FIFO);
RT_ASSERT(result == RT_EOK);
eth_dev->rx_pbuf_mb = &eth_rx_pbuf_mb;
result = eth_device_init(&(eth_dev->parent), "e0");
return result;
RT_ASSERT(result == RT_EOK);
eth_dev->rx_pbuf_mb = &eth_rx_pbuf_mb;
result = eth_device_init(&(eth_dev->parent), "e0");
return result;
}
// eth_device_init using malloc
// We use INIT_COMPONENT_EXPORT insted of INIT_BOARD_EXPORT
......@@ -1416,28 +1416,28 @@ INIT_COMPONENT_EXPORT(rt_hw_tiva_eth_init);
#include "finsh.h"
void PHY_Read(uint8_t addr)
{
uint16_t data = EMACPHYRead(EMAC0_BASE, PHY_PHYS_ADDR, addr);
rt_kprintf("R PHY_REG[0x%02X] = 0x%04X\n", addr, data);
uint16_t data = EMACPHYRead(EMAC0_BASE, PHY_PHYS_ADDR, addr);
rt_kprintf("R PHY_REG[0x%02X] = 0x%04X\n", addr, data);
}
FINSH_FUNCTION_EXPORT(PHY_Read, (add));
void PHY_Write(uint8_t addr , uint16_t data)
{
EMACPHYWrite(EMAC0_BASE, PHY_PHYS_ADDR, addr, data);
rt_kprintf("W PHY_REG[0x%02X] = 0x%04X\n", addr, data);
rt_kprintf("W PHY_REG[0x%02X] = 0x%04X\n", addr, data);
}
FINSH_FUNCTION_EXPORT(PHY_Write, (add, data));
void PHY_SetAdd(uint8_t addr0, uint8_t addr1, uint8_t addr2,
uint8_t addr3, uint8_t addr4, uint8_t addr5)
{
uint32_t ulUser[2];
ulUser[0] = (((addr2<<8)|addr1)<<8)|addr0;
ulUser[1] = (((addr5<<8)|addr4)<<8)|addr3;
MAP_FlashUserSet(ulUser[0], ulUser[1]);
MAP_FlashUserSave();
rt_kprintf("Save to EEPROM. please reboot.");
uint32_t ulUser[2];
ulUser[0] = (((addr2<<8)|addr1)<<8)|addr0;
ulUser[1] = (((addr5<<8)|addr4)<<8)|addr3;
MAP_FlashUserSet(ulUser[0], ulUser[1]);
MAP_FlashUserSave();
rt_kprintf("Save to EEPROM. please reboot.");
}
FINSH_FUNCTION_EXPORT(PHY_SetAdd, (add0-add5));
#endif //RT_USING_FINSH
......
bsp/tm4c129x/rtconfig.h
浏览文件 @ 61b6fca3
......@@ -8,17 +8,18 @@
#define RT_NAME_MAX 8
#define RT_ALIGN_SIZE 4
#define RT_THREAD_PRIORITY_32
#define RT_THREAD_PRIORITY_MAX 32
#define RT_TICK_PER_SECOND 100
#define RT_DEBUG
#define RT_USING_OVERFLOW_CHECK
#define RT_DEBUG_INIT 0
/* RT_DEBUG_THREAD is not set */
#define RT_USING_HOOK
#define RT_USING_IDLE_HOOK
#define RT_IDEL_HOOK_LIST_SIZE 4
#define IDLE_THREAD_STACK_SIZE 256
#define RT_USING_TIMER_SOFT
#define RT_TIMER_THREAD_PRIO 4
#define RT_TIMER_THREAD_STACK_SIZE 512
#define RT_DEBUG
/* Inter-Thread communication */
......@@ -27,15 +28,13 @@
#define RT_USING_EVENT
#define RT_USING_MAILBOX
#define RT_USING_MESSAGEQUEUE
/* RT_USING_SIGNALS is not set */
/* Memory Management */
#define RT_USING_MEMPOOL
#define RT_USING_MEMHEAP
#define RT_USING_HEAP
#define RT_USING_SMALL_MEM
/* RT_USING_SLAB is not set */
#define RT_USING_HEAP
/* Kernel Device Object */
......@@ -43,71 +42,64 @@
#define RT_USING_CONSOLE
#define RT_CONSOLEBUF_SIZE 128
#define RT_CONSOLE_DEVICE_NAME "uart0"
/* RT_USING_MODULE is not set */
#define RT_VER_NUM 0x40000
/* RT-Thread Components */
#define RT_USING_COMPONENTS_INIT
#define RT_USING_USER_MAIN
#define RT_MAIN_THREAD_STACK_SIZE 2048
#define RT_MAIN_THREAD_PRIORITY 10
/* C++ features */
/* RT_USING_CPLUSPLUS is not set */
/* Command shell */
#define RT_USING_FINSH
#define FINSH_THREAD_NAME "tshell"
#define FINSH_USING_HISTORY
#define FINSH_HISTORY_LINES 5
#define FINSH_USING_SYMTAB
#define FINSH_USING_DESCRIPTION
#define FINSH_THREAD_PRIORITY 20
#define FINSH_THREAD_STACK_SIZE 4096
#define FINSH_CMD_SIZE 80
/* FINSH_USING_AUTH is not set */
/* FINSH_USING_MSH is not set */
/* Device virtual file system */
/* RT_USING_DFS is not set */
/* Device Drivers */
#define RT_USING_DEVICE_IPC
#define RT_PIPE_BUFSZ 512
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
/* RT_USING_CAN is not set */
/* RT_USING_HWTIMER is not set */
/* RT_USING_I2C is not set */
/* RT_USING_PIN is not set */
/* RT_USING_MTD_NOR is not set */
/* RT_USING_MTD_NAND is not set */
/* RT_USING_RTC is not set */
/* RT_USING_SDIO is not set */
/* RT_USING_SPI is not set */
/* RT_USING_WDT is not set */
/* RT_USING_USB_HOST is not set */
/* RT_USING_USB_DEVICE is not set */
/* Using WiFi */
/* Using USB */
/* POSIX layer and C standard library */
/* RT_USING_LIBC is not set */
/* RT_USING_PTHREADS is not set */
#define RT_USING_LIBC
/* Network */
/* Socket abstraction layer */
/* Network stack */
/* light weight TCP/IP stack */
#define RT_USING_LWIP
#define RT_USING_LWIP141
/* RT_USING_LWIP202 is not set */
/* RT_LWIP_IGMP is not set */
#define RT_LWIP_ICMP
/* RT_LWIP_SNMP is not set */
#define RT_LWIP_DNS
#define RT_LWIP_DHCP
#define IP_SOF_BROADCAST 1
#define IP_SOF_BROADCAST_RECV 1
/* LWIP_USING_DHCPD is not set */
/* Static IPv4 Address */
......@@ -116,10 +108,7 @@
#define RT_LWIP_MSKADDR "255.255.255.0"
#define RT_LWIP_UDP
#define RT_LWIP_TCP
/* RT_LWIP_RAW is not set */
/* RT_LWIP_PPP is not set */
/* RT_LWIP_PPPOE is not set */
/* RT_LWIP_PPPOS is not set */
#define RT_MEMP_NUM_NETCONN 8
#define RT_LWIP_PBUF_NUM 16
#define RT_LWIP_RAW_PCB_NUM 4
#define RT_LWIP_UDP_PCB_NUM 4
......@@ -133,62 +122,69 @@
#define RT_LWIP_ETHTHREAD_PRIORITY 12
#define RT_LWIP_ETHTHREAD_STACKSIZE 1024
#define RT_LWIP_ETHTHREAD_MBOX_SIZE 8
/* RT_LWIP_REASSEMBLY_FRAG is not set */
#define LWIP_NETIF_STATUS_CALLBACK 1
#define SO_REUSE 1
#define LWIP_SO_RCVTIMEO 1
#define LWIP_SO_SNDTIMEO 1
#define LWIP_SO_RCVBUF 1
#define LWIP_NETIF_LOOPBACK 0
/* Modbus master and slave stack */
/* RT_USING_MODBUS is not set */
/* RT_USING_NETUTILS is not set */
/* RT-Thread UI Engine */
/* AT commands */
/* PKG_USING_GUIENGINE is not set */
/* RT-Thread online packages */
/* VBUS(Virtual Software BUS) */
/* system packages */
/* PKG_USING_PARTITION is not set */
/* PKG_USING_SQLITE is not set */
/* Utilities */
/* RT-Thread online packages */
/* IoT - internet of things */
/* PKG_USING_PAHOMQTT is not set */
/* PKG_USING_WEBCLIENT is not set */
/* PKG_USING_MONGOOSE is not set */
/* PKG_USING_WEBTERMINAL is not set */
/* PKG_USING_CJSON is not set */
/* PKG_USING_EZXML is not set */
/* Wi-Fi */
/* Marvell WiFi */
/* PKG_USING_MARVELLWIFI is not set */
/* Wiced WiFi */
/* IoT Cloud */
/* security packages */
/* PKG_USING_MBEDTLS is not set */
/* language packages */
/* PKG_USING_JERRYSCRIPT is not set */
/* multimedia packages */
/* tools packages */
/* PKG_USING_CMBACKTRACE is not set */
/* PKG_USING_EASYLOGGER is not set */
/* system packages */
/* peripheral libraries and drivers */
/* miscellaneous packages */
/* PKG_USING_HELLO is not set */
/* BSP_SPECIAL CONFIG */
/* samples: kernel and components samples */
/* Privated Packages of RealThread */
/* Network Utilities */
#define RT_USING_UART0
......
components/net/lwip-1.4.1/src/arch/include/arch/cc.h
浏览文件 @ 61b6fca3
......@@ -38,13 +38,14 @@
#include <rthw.h>
#include <rtthread.h>
typedef rt_uint8_t u8_t;
typedef rt_int8_t s8_t;
typedef rt_uint16_t u16_t;
typedef rt_int16_t s16_t;
typedef rt_uint32_t u32_t;
typedef rt_int32_t s32_t;
typedef rt_uint32_t mem_ptr_t;
#include <stdint.h>
typedef uint8_t u8_t;
typedef int8_t s8_t;
typedef uint16_t u16_t;
typedef int16_t s16_t;
typedef uint32_t u32_t;
typedef int32_t s32_t;
typedef uintptr_t mem_ptr_t;
#define U16_F "hu"
#define S16_F "hd"
......
components/net/lwip-1.4.1/src/arch/sys_arch.c
浏览文件 @ 61b6fca3
......@@ -497,10 +497,11 @@ u32_t sys_arch_mbox_fetch(sys_mbox_t *mbox, void **msg, u32_t timeout)
t = timeout / (1000/RT_TICK_PER_SECOND);
}
ret = rt_mb_recv(*mbox, (rt_uint32_t *)msg, t);
ret = rt_mb_recv(*mbox, (rt_ubase_t *)msg, t);
if(ret == -RT_ETIMEOUT)
{
return SYS_ARCH_TIMEOUT;
}
else
{
LWIP_ASSERT("rt_mb_recv returned with error!", ret == RT_EOK);
......@@ -528,10 +529,11 @@ u32_t sys_arch_mbox_tryfetch(sys_mbox_t *mbox, void **msg)
{
int ret;
ret = rt_mb_recv(*mbox, (rt_uint32_t *)msg, 0);
ret = rt_mb_recv(*mbox, (rt_ubase_t *)msg, 0);
if(ret == -RT_ETIMEOUT)
{
return SYS_ARCH_TIMEOUT;
}
else
{
if (ret == RT_EOK)
......
components/net/lwip-1.4.1/src/netif/ethernetif.c
浏览文件 @ 61b6fca3
......@@ -307,7 +307,7 @@ static void eth_tx_thread_entry(void* parameter)
while (1)
{
if (rt_mb_recv(&eth_tx_thread_mb, (rt_uint32_t*)&msg, RT_WAITING_FOREVER) == RT_EOK)
if (rt_mb_recv(&eth_tx_thread_mb, (rt_ubase_t*)&msg, RT_WAITING_FOREVER) == RT_EOK)
{
struct eth_device* enetif;
......@@ -339,7 +339,7 @@ static void eth_rx_thread_entry(void* parameter)
while (1)
{
if (rt_mb_recv(&eth_rx_thread_mb, (rt_uint32_t*)&device, RT_WAITING_FOREVER) == RT_EOK)
if (rt_mb_recv(&eth_rx_thread_mb, (rt_ubase_t*)&device, RT_WAITING_FOREVER) == RT_EOK)
{
struct pbuf *p;
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或