Skip to content

R
rt-thread

wwsmg1 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 1
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 5cbe2221 编写于 作者: S SummerGift
浏览文件
操作

[bsp][STM32] update stm32 bsp

上级 c40bea56
展开全部 隐藏空白更改
内联 并排
Showing with 263 addition and 127 deletion
bsp/stm32/README.md
浏览文件 @ 5cbe2221
......@@ -10,4 +10,11 @@ STM32 系列 BSP 目前支持情况如下表所示：
| stm32f429-atk-apollo | 正点原子 F429 阿波罗开发板 |
| stm32f429-fire-challenger | 野火 F429 挑战者开发板 |
了解每个 BSP 的详细情况可以阅读该 BSP 下的 readme 文件，如需使用 BSP 更多功能可参考 docs 文件夹下提供的说明文档：
| 文档名称 | 简介 |
| -------------------- | ------------------------------------------------- |
| BSP 进阶使用指南 | 介绍如何使用 BSP 提供的高级功能以及添加更多新功能 |
| STM32系列BSP添加教程 | 介绍如何添加一个新的 STM32 系列的 BSP |
| STM32系列BSP制作规范 | 介绍一个新 STM32 系列 BSP 的制作规范 |
bsp/stm32/docs/BSP进阶使用指南.md 0 → 100644
浏览文件 @ 5cbe2221
# BSP 进阶使用指南
## 简介
本文档是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用 ENV 工具对 BSP 进行配置，可以开启更多板载资源，实现更多高级功能。
主要包括以下内容：
1. 如何使用开发板上更多的板载资源
2. 如何使用更多的片上资源
3. 如何添加更多片上资源选项
## 前提要求
- 学会如何使用 ENV 工具，参考：[RT-Thread env 工具用户手册](https://www.rt-thread.org/document/site/rtthread-development-guide/rtthread-tool-manual/env/env-user-manual/)
## 如何使用更多的板载资源
开发板上一般有很多的板载资源，如 Flash、SD卡、以太网等，但是 BSP 工程默认没有添加对这些外设的支持。如何在工程里添加这些外设的支持呢？这就需要使用 ENV 工具了。下面以在正点原子阿波罗 F429 开发板上开启 SPI Flash 支持为例，一步步的展示如何使用 ENV 工具对 BSP 进行配置。
### 1）打开配置工具
在目录 `rt-thread\bsp\stm32\stm32f429-atk-apollo` 下打开 menuconfig 配置界面。
![打开 menuconfig](figures/menuconfig_apolo.png)
打开的配置工具界面如下所示：
![RT-Thread 配置菜单](figures/config1.png)
通过键盘上的上下键移动光标，选中 `Hardware Drivers Config`然后按回车键进入硬件驱动配置菜单。
### 2）进入硬件驱动配置菜单
在硬件配置菜单里有三个选项，分别是 **板载外设配置菜单**、**片上外设配置菜单**和**扩展模块配置菜单**，按回车键进入板载外设配置菜单。
![硬件驱动 配置菜单](figures/config2.png)
### 3）在板载外设配置菜单里开启 SPI Flash 选项
![板载外设 配置菜单](figures/spi_flash.png)
### 4）保存退出
然后右移光标选中 Save 按回车键保存，然后按 Esc 键退出配置工具。
![保存退出](figures/save.png)
### 5）更新软件包
输入命令 `pkgs --update` 使软件包配置生效。
![1543477036034](figures/update.png)
### 6）生成 MDK5 工程
输入命令 `scons --target=mdk5 -s` 重新生成 MDK5 的工程。
![1543477194829](figures/scons_mdk5.png)
### 7）编译下载
打开生成的 MDK5 工程文件，编译并下载。
![1543478492157](figures/complise.png)
### 8）查看运行结果
程序运行后，输入命令 `list_device` 可以看到名为 W25Q256 的块设备，此时 `SPI Flash` 设备已经可以使用了。
![1543478742034](figures/run_flash.png)
## 如何使用更多的片上资源
如果想要使用除了当前支持的片上资源（GPIO 和 UART1），又不想开启板载资源的支持，可以通过直接配置 **片上外设配置菜单** 的方式，使用更多片上资源。
配置方法和上一章节介绍的 **如何使用更多的板载资源的配置方法** 一样，只是本次需要进入 `片上外设配置菜单`。
![1543481275711](figures/on_chip_config.png)
## 如何添加更多的片上资源选项
如果想使用的片上外设是 `片上外设配置菜单` 里没有的，就需要自己添加了。下面以添加 SPI3 的驱动支持为例讲解如何添加更多片上外设支持。
> 没有安装 stm32cubemx 软件的移步 STM32cube中文网：<http://www.stm32cube.com/> ，在 `资源下载` 里下载 stm32cubemx 软件。
添加 SPI3 的外设支持需要以下几步：
### 1）打开 Cube 的工程
![1543486779576](figures/cubemx.png)
### 2）配置好 SPI3 的引脚，并生成代码
按照图中所示步骤操作：
![1543487684698](figures/cube_spi3.png)
### 3）修改 Konfig 文件
打开board文件夹下的 Konfig 文件，拷贝 SPI2 的配置项，并重命名 SPI2 为 SPI3。
![1543542657074](figures/Kconfig2.png)
### 4）重新配置工程
经过上一步的修改，此时重新打开 ENV 工具，在 menuconfig 中就会出现添加的 SPI3 的配置项。
![1543543081284](figures/config5.png)
### 5）生成工程，编译下载
重新生成工程之后，编译下载到开发板，程序会自动开始运行。输入 `list_device` 命令可以看到 spi3 总线设备已经挂载成功了。
![1543543446786](figures/run_spi3.png)
bsp/stm32/libraries/templates/STM32系列BSP添加教程.md → bsp/stm32/docs/STM32系列BSP添加教程.md
浏览文件 @ 5cbe2221
......@@ -112,6 +112,8 @@ STM32 BSP 由三部分组成，分别是 (1) 通用库、(2) BSP 模板和 (3)
| SOC_STM32F103RB | 芯片型号 | SOC_STM32xxx |
| SOC_SERIES_STM32F1 | 芯片系列| SOC_SERIES_STM32xx |
用户可参考这个链接学习 Kconfig语法：(https://blog.csdn.net/jianwen_hi/article/details/53398141)
### 修改工程构建相关文件
接下来需要修改用于构建工程相关的文件。
......
bsp/stm32/libraries/HAL_Drivers/config/f1/spi_config.h
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-11-06 SummerGift change to new framework
......
bsp/stm32/libraries/HAL_Drivers/config/f1/uart_config.h
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-10-30 BalanceTWK change to new framework
......
bsp/stm32/libraries/HAL_Drivers/config/f4/spi_config.h
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-11-06 SummerGift change to new framework
......
bsp/stm32/libraries/HAL_Drivers/config/f4/uart_config.h
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-10-30 SummerGift change to new framework
......
bsp/stm32/libraries/HAL_Drivers/config/l4/spi_config.h
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-11-06 SummerGift change to new framework
......
bsp/stm32/libraries/HAL_Drivers/config/l4/uart_config.h
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-11-06 SummerGift change to new framework
......
bsp/stm32/libraries/HAL_Drivers/drv_common.c
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-11-7 SummerGift change to new framework
......
bsp/stm32/libraries/HAL_Drivers/drv_common.h
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-11-7 SummerGift change to new framework
......
bsp/stm32/libraries/HAL_Drivers/drv_config.h
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-10-30 SummerGift change to new framework
......
bsp/stm32/libraries/HAL_Drivers/drv_dma.h
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-11-10 SummerGift change to new framework
......
bsp/stm32/libraries/HAL_Drivers/drv_emac.c
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-11-19 SummerGift first version
......
bsp/stm32/libraries/HAL_Drivers/drv_gpio.c
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-11-06 balanceTWK change to new framework
......
bsp/stm32/libraries/HAL_Drivers/drv_gpio.h
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-11-06 balanceTWK change to new framework
......
bsp/stm32/libraries/HAL_Drivers/drv_qspi.c
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-11-27 zylx change to new framework
......@@ -19,10 +18,7 @@
#define LOG_TAG "drv.qspi"
#include <drv_log.h>
#if !defined(BSP_USING_QSPI)
#error "Please define at least one BSP_USING_QSPI"
/* this driver can be disabled at menuconfig ? RT-Thread Components ? Device Drivers */
#endif
#if defined(BSP_USING_QSPI)
struct stm32_hw_spi_cs
{
......@@ -33,6 +29,9 @@ struct stm32_qspi_bus
{
QSPI_HandleTypeDef QSPI_Handler;
char *bus_name;
#ifdef BSP_QSPI_USING_DMA
DMA_HandleTypeDef hdma_quadspi;
#endif
};
struct rt_spi_bus _qspi_bus1;
......@@ -94,6 +93,33 @@ static int stm32_qspi_init(struct rt_qspi_device *device, struct rt_qspi_configu
LOG_E("qspi init failed (%d)!", result);
}
#ifdef BSP_QSPI_USING_DMA
/* QSPI interrupts must be enabled when using the HAL_QSPI_Receive_DMA */
HAL_NVIC_SetPriority(QUADSPI_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(QUADSPI_IRQn);
HAL_NVIC_SetPriority(DMA1_Channel5_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(DMA1_Channel5_IRQn);
/* init QSPI DMA */
__HAL_RCC_DMA1_CLK_ENABLE();
HAL_DMA_DeInit(qspi_bus->QSPI_Handler.hdma);
qspi_bus->hdma_quadspi.Instance = DMA1_Channel5;
qspi_bus->hdma_quadspi.Init.Request = DMA_REQUEST_5;
qspi_bus->hdma_quadspi.Init.Direction = DMA_PERIPH_TO_MEMORY;
qspi_bus->hdma_quadspi.Init.PeriphInc = DMA_PINC_DISABLE;
qspi_bus->hdma_quadspi.Init.MemInc = DMA_MINC_ENABLE;
qspi_bus->hdma_quadspi.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
qspi_bus->hdma_quadspi.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
qspi_bus->hdma_quadspi.Init.Mode = DMA_NORMAL;
qspi_bus->hdma_quadspi.Init.Priority = DMA_PRIORITY_LOW;
if (HAL_DMA_Init(&qspi_bus->hdma_quadspi) != HAL_OK)
{
LOG_E("qspi dma init failed (%d)!", result);
}
__HAL_LINKDMA(&qspi_bus->QSPI_Handler,hdma,qspi_bus->hdma_quadspi);
#endif /* BSP_QSPI_USING_DMA */
return result;
}
......@@ -205,7 +231,6 @@ static rt_uint32_t qspixfer(struct rt_spi_device *device, struct rt_spi_message
{
if (HAL_QSPI_Transmit(&qspi_bus->QSPI_Handler, (rt_uint8_t *)sndb, 5000) == HAL_OK)
{
len = length;
}
else
......@@ -222,12 +247,17 @@ static rt_uint32_t qspixfer(struct rt_spi_device *device, struct rt_spi_message
}
else if (rcvb)/* recv data */
{
qspi_send_cmd(qspi_bus, qspi_message);
#ifdef BSP_QSPI_USING_DMA
if (HAL_QSPI_Receive_DMA(&qspi_bus->QSPI_Handler, rcvb) == HAL_OK)
#else
if (HAL_QSPI_Receive(&qspi_bus->QSPI_Handler, rcvb, 5000) == HAL_OK)
#endif
{
len = length;
#ifdef BSP_QSPI_USING_DMA
while(qspi_bus->QSPI_Handler.RxXferCount != 0);
#endif
}
else
{
......@@ -283,20 +313,22 @@ static int stm32_qspi_register_bus(struct stm32_qspi_bus *qspi_bus, const char *
*/
rt_err_t stm32_qspi_bus_attach_device(const char *bus_name, const char *device_name, rt_uint32_t pin, rt_uint8_t data_line_width, void (*enter_qspi_mode)(), void (*exit_qspi_mode)())
{
struct rt_qspi_device *qspi_device = RT_NULL;
struct stm32_hw_spi_cs *cs_pin = RT_NULL;
rt_err_t result = RT_EOK;
RT_ASSERT(bus_name != RT_NULL);
RT_ASSERT(device_name != RT_NULL);
RT_ASSERT(data_line_width == 1 || data_line_width == 2 || data_line_width == 4);
struct rt_qspi_device *qspi_device = (struct rt_qspi_device *)rt_malloc(sizeof(struct rt_qspi_device));
qspi_device = (struct rt_qspi_device *)rt_malloc(sizeof(struct rt_qspi_device));
if (qspi_device == RT_NULL)
{
LOG_E("no memory, qspi bus attach device failed!");
result = RT_ENOMEM;
goto __exit;
}
struct stm32_hw_spi_cs *cs_pin = (struct stm32_hw_spi_cs *)rt_malloc(sizeof(struct stm32_hw_spi_cs));
cs_pin = (struct stm32_hw_spi_cs *)rt_malloc(sizeof(struct stm32_hw_spi_cs));
if (qspi_device == RT_NULL)
{
LOG_E("no memory, qspi bus attach device failed!");
......@@ -333,10 +365,35 @@ __exit:
return result;
}
#ifdef BSP_QSPI_USING_DMA
void QUADSPI_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
HAL_QSPI_IRQHandler(&_stm32_qspi_bus.QSPI_Handler);
/* leave interrupt */
rt_interrupt_leave();
}
void DMA1_Channel5_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
HAL_DMA_IRQHandler(&_stm32_qspi_bus.hdma_quadspi);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* BSP_QSPI_USING_DMA */
static int rt_hw_qspi_bus_init(void)
{
return stm32_qspi_register_bus(&_stm32_qspi_bus, "qspi1");
}
INIT_BOARD_EXPORT(rt_hw_qspi_bus_init);
#endif /* BSP_USING_QSPI */
#endif /* RT_USING_QSPI */
bsp/stm32/libraries/HAL_Drivers/drv_qspi.h
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-11-27 zylx change to new framework
......
bsp/stm32/libraries/HAL_Drivers/drv_spi.c
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-11-5 SummerGift change to new framework
......
bsp/stm32/libraries/HAL_Drivers/drv_spi.h
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-11-5 SummerGift change to new framework
......
bsp/stm32/libraries/HAL_Drivers/drv_usart.c
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-10-30 SummerGift change to new framework
......
bsp/stm32/libraries/HAL_Drivers/drv_usart.h
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018.10.30 SummerGift change to new framework
......
bsp/stm32/libraries/templates/stm32f10x/applications/main.c
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-11-06 SummerGift change to new framework
......
bsp/stm32/libraries/templates/stm32f10x/board/board.c
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-11-06 SummerGift change to new framework
......
bsp/stm32/libraries/templates/stm32f10x/board/board.h
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-11-5 SummerGift change to new framework
......
bsp/stm32/libraries/templates/stm32f10x/project.ewp
浏览文件 @ 5cbe2221
......@@ -651,7 +651,7 @@
</option>
<option>
<name>OOCOutputFile</name>
<state>../../../rt-thread.bin</state>
<state>../../../rtthread.bin</state>
</option>
<option>
<name>OOCCommandLineProducer</name>
......
bsp/stm32/libraries/templates/stm32f10x/project.uvproj
浏览文件 @ 5cbe2221
......@@ -73,7 +73,7 @@
<AfterMake>
<RunUserProg1>1</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name>fromelf --bin !L --output rt-thread.bin</UserProg1Name>
<UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
<UserProg2Name />
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
......
bsp/stm32/libraries/templates/stm32f10x/project.uvprojx
浏览文件 @ 5cbe2221
......@@ -79,7 +79,7 @@
<AfterMake>
<RunUserProg1>1</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name>fromelf --bin !L --output rt-thread.bin</UserProg1Name>
<UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
<UserProg2Name />
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
......
bsp/stm32/libraries/templates/stm32f10x/rtconfig.py
浏览文件 @ 5cbe2221
......@@ -53,7 +53,7 @@ if PLATFORM == 'gcc':
else:
CFLAGS += ' -O2'
POST_ACTION = OBJCPY + ' -O binary $TARGET rt-thread.bin\n' + SIZE + ' $TARGET \n'
POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n'
elif PLATFORM == 'armcc':
# toolchains
......@@ -81,7 +81,7 @@ elif PLATFORM == 'armcc':
else:
CFLAGS += ' -O2'
POST_ACTION = 'fromelf --bin $TARGET --output rt-thread.bin \nfromelf -z $TARGET'
POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
elif PLATFORM == 'iar':
# toolchains
......@@ -127,4 +127,4 @@ elif PLATFORM == 'iar':
LFLAGS += ' --entry __iar_program_start'
EXEC_PATH = EXEC_PATH + '/arm/bin/'
POST_ACTION = 'ielftool --bin $TARGET rt-thread.bin'
POST_ACTION = 'ielftool --bin $TARGET rtthread.bin'
bsp/stm32/libraries/templates/stm32f10x/template.ewp
浏览文件 @ 5cbe2221
......@@ -636,7 +636,7 @@
</option>
<option>
<name>OOCOutputFile</name>
<state>../../../rt-thread.bin</state>
<state>../../../rtthread.bin</state>
</option>
<option>
<name>OOCCommandLineProducer</name>
......
bsp/stm32/libraries/templates/stm32f10x/template.uvproj
浏览文件 @ 5cbe2221
......@@ -76,7 +76,7 @@
<AfterMake>
<RunUserProg1>1</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name>fromelf --bin !L --output rt-thread.bin</UserProg1Name>
<UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
......
bsp/stm32/libraries/templates/stm32f10x/template.uvprojx
浏览文件 @ 5cbe2221
......@@ -82,7 +82,7 @@
<AfterMake>
<RunUserProg1>1</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name>fromelf --bin !L --output rt-thread.bin</UserProg1Name>
<UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
......
bsp/stm32/libraries/templates/stm32f4xx/applications/main.c
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-11-06 SummerGift change to new framework
......
bsp/stm32/libraries/templates/stm32f4xx/board/board.h
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-11-5 SummerGift change to new framework
......
bsp/stm32/libraries/templates/stm32f4xx/project.ewp
浏览文件 @ 5cbe2221
......@@ -651,7 +651,7 @@
</option>
<option>
<name>OOCOutputFile</name>
<state>../../../rt-thread.bin</state>
<state>../../../rtthread.bin</state>
</option>
<option>
<name>OOCCommandLineProducer</name>
......
bsp/stm32/libraries/templates/stm32f4xx/project.uvproj
浏览文件 @ 5cbe2221
......@@ -73,7 +73,7 @@
<AfterMake>
<RunUserProg1>1</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name>fromelf --bin !L --output rt-thread.bin</UserProg1Name>
<UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
<UserProg2Name />
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
......
bsp/stm32/libraries/templates/stm32f4xx/project.uvprojx
浏览文件 @ 5cbe2221
......@@ -79,7 +79,7 @@
<AfterMake>
<RunUserProg1>1</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name>fromelf --bin !L --output rt-thread.bin</UserProg1Name>
<UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
<UserProg2Name />
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
......
bsp/stm32/libraries/templates/stm32f4xx/rtconfig.py
浏览文件 @ 5cbe2221
......@@ -53,7 +53,7 @@ if PLATFORM == 'gcc':
else:
CFLAGS += ' -O2'
POST_ACTION = OBJCPY + ' -O binary $TARGET rt-thread.bin\n' + SIZE + ' $TARGET \n'
POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n'
elif PLATFORM == 'armcc':
# toolchains
......@@ -81,7 +81,7 @@ elif PLATFORM == 'armcc':
else:
CFLAGS += ' -O2'
POST_ACTION = 'fromelf --bin $TARGET --output rt-thread.bin \nfromelf -z $TARGET'
POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
elif PLATFORM == 'iar':
# toolchains
......@@ -127,4 +127,4 @@ elif PLATFORM == 'iar':
LFLAGS += ' --entry __iar_program_start'
EXEC_PATH = EXEC_PATH + '/arm/bin/'
POST_ACTION = 'ielftool --bin $TARGET rt-thread.bin'
POST_ACTION = 'ielftool --bin $TARGET rtthread.bin'
bsp/stm32/libraries/templates/stm32f4xx/template.ewp
浏览文件 @ 5cbe2221
......@@ -636,7 +636,7 @@
</option>
<option>
<name>OOCOutputFile</name>
<state>../../../rt-thread.bin</state>
<state>../../../rtthread.bin</state>
</option>
<option>
<name>OOCCommandLineProducer</name>
......
bsp/stm32/libraries/templates/stm32f4xx/template.uvproj
浏览文件 @ 5cbe2221
......@@ -76,7 +76,7 @@
<AfterMake>
<RunUserProg1>1</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name>fromelf --bin !L --output rt-thread.bin</UserProg1Name>
<UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
......
bsp/stm32/libraries/templates/stm32f4xx/template.uvprojx
浏览文件 @ 5cbe2221
......@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>STM32F407ZGTx</Device>
<Vendor>STMicroelectronics</Vendor>
<PackID>Keil.STM32F4xx_DFP.2.11.0</PackID>
<PackID>Keil.STM32F4xx_DFP.2.13.0</PackID>
<PackURL>http://www.keil.com/pack</PackURL>
<Cpu>IRAM(0x20000000,0x20000) IRAM2(0x10000000,0x10000) IROM(0x08000000,0x100000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
......@@ -82,7 +82,7 @@
<AfterMake>
<RunUserProg1>1</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name>fromelf --bin !L --output rt-thread.bin</UserProg1Name>
<UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
......
bsp/stm32/libraries/templates/stm32l4xx/applications/main.c
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-11-06 SummerGift change to new framework
......
bsp/stm32/libraries/templates/stm32l4xx/board/board.c
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-11-06 SummerGift change to new framework
......
bsp/stm32/libraries/templates/stm32l4xx/board/board.h
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-11-5 SummerGift change to new framework
......
bsp/stm32/libraries/templates/stm32l4xx/project.ewp
浏览文件 @ 5cbe2221
......@@ -651,7 +651,7 @@
</option>
<option>
<name>OOCOutputFile</name>
<state>../../../rt-thread.bin</state>
<state>../../../rtthread.bin</state>
</option>
<option>
<name>OOCCommandLineProducer</name>
......
bsp/stm32/libraries/templates/stm32l4xx/project.uvprojx
浏览文件 @ 5cbe2221
......@@ -79,7 +79,7 @@
<AfterMake>
<RunUserProg1>1</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name>fromelf --bin !L --output rt-thread.bin</UserProg1Name>
<UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
<UserProg2Name />
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
......
bsp/stm32/libraries/templates/stm32l4xx/rtconfig.py
浏览文件 @ 5cbe2221
......@@ -53,7 +53,7 @@ if PLATFORM == 'gcc':
else:
CFLAGS += ' -O2'
POST_ACTION = OBJCPY + ' -O binary $TARGET rt-thread.bin\n' + SIZE + ' $TARGET \n'
POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n'
elif PLATFORM == 'armcc':
# toolchains
......@@ -81,7 +81,7 @@ elif PLATFORM == 'armcc':
else:
CFLAGS += ' -O2'
POST_ACTION = 'fromelf --bin $TARGET --output rt-thread.bin \nfromelf -z $TARGET'
POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
elif PLATFORM == 'iar':
# toolchains
......@@ -127,4 +127,4 @@ elif PLATFORM == 'iar':
LFLAGS += ' --entry __iar_program_start'
EXEC_PATH = EXEC_PATH + '/arm/bin/'
POST_ACTION = 'ielftool --bin $TARGET rt-thread.bin'
POST_ACTION = 'ielftool --bin $TARGET rtthread.bin'
bsp/stm32/libraries/templates/stm32l4xx/template.ewp
浏览文件 @ 5cbe2221
......@@ -636,7 +636,7 @@
</option>
<option>
<name>OOCOutputFile</name>
<state>../../../rt-thread.bin</state>
<state>../../../rtthread.bin</state>
</option>
<option>
<name>OOCCommandLineProducer</name>
......
bsp/stm32/libraries/templates/stm32l4xx/template.uvprojx
浏览文件 @ 5cbe2221
......@@ -82,7 +82,7 @@
<AfterMake>
<RunUserProg1>1</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name>fromelf --bin !L --output rt-thread.bin</UserProg1Name>
<UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
......
bsp/stm32/stm32f103-atk-nano/applications/main.c
浏览文件 @ 5cbe2221
......@@ -7,6 +7,7 @@
* Date Author Notes
* 2018-11-27 balanceTWK change to new framework
*/
#include <rtthread.h>
#include <rtdevice.h>
#include <board.h>
......
bsp/stm32/stm32f103-atk-nano/board/board.c
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-11-06 balanceTWK change to new framework
......
bsp/stm32/stm32f103-atk-nano/board/board.h
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-11-5 SummerGift change to new framework
......
bsp/stm32/stm32f103-atk-nano/board/ports/spi_flash_init.c
浏览文件 @ 5cbe2221
......@@ -3,7 +3,6 @@
*
* SPDX-License-Identifier: Apache-2.0
*
*
* Change Logs:
* Date Author Notes
* 2018-11-27 SummerGift add spi flash port file
......
bsp/stm32/stm32f103-atk-nano/project.ewp
浏览文件 @ 5cbe2221
......@@ -651,7 +651,7 @@
</option>
<option>
<name>OOCOutputFile</name>
<state>../../../rt-thread.bin</state>
<state>../../../rtthread.bin</state>
</option>
<option>
<name>OOCCommandLineProducer</name>
......
bsp/stm32/stm32f103-atk-nano/project.uvproj
浏览文件 @ 5cbe2221
......@@ -73,7 +73,7 @@
<AfterMake>
<RunUserProg1>1</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name>fromelf --bin !L --output rt-thread.bin</UserProg1Name>
<UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
<UserProg2Name />
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
......
bsp/stm32/stm32f103-atk-nano/project.uvprojx
浏览文件 @ 5cbe2221
......@@ -79,7 +79,7 @@
<AfterMake>
<RunUserProg1>1</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name>fromelf --bin !L --output rt-thread.bin</UserProg1Name>
<UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
<UserProg2Name />
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
......
bsp/stm32/stm32f103-atk-nano/rtconfig.py
浏览文件 @ 5cbe2221
......@@ -53,7 +53,7 @@ if PLATFORM == 'gcc':
else:
CFLAGS += ' -O2'
POST_ACTION = OBJCPY + ' -O binary $TARGET rt-thread.bin\n' + SIZE + ' $TARGET \n'
POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n'
elif PLATFORM == 'armcc':
# toolchains
......@@ -81,7 +81,7 @@ elif PLATFORM == 'armcc':
else:
CFLAGS += ' -O2'
POST_ACTION = 'fromelf --bin $TARGET --output rt-thread.bin \nfromelf -z $TARGET'
POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
elif PLATFORM == 'iar':
# toolchains
......@@ -127,4 +127,4 @@ elif PLATFORM == 'iar':
LFLAGS += ' --entry __iar_program_start'
EXEC_PATH = EXEC_PATH + '/arm/bin/'
POST_ACTION = 'ielftool --bin $TARGET rt-thread.bin'
POST_ACTION = 'ielftool --bin $TARGET rtthread.bin'
bsp/stm32/stm32f103-atk-nano/template.ewp
浏览文件 @ 5cbe2221
......@@ -636,7 +636,7 @@
</option>
<option>
<name>OOCOutputFile</name>
<state>../../../rt-thread.bin</state>
<state>../../../rtthread.bin</state>
</option>
<option>
<name>OOCCommandLineProducer</name>
......
bsp/stm32/stm32f103-atk-nano/template.uvproj
浏览文件 @ 5cbe2221
......@@ -76,7 +76,7 @@
<AfterMake>
<RunUserProg1>1</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name>fromelf --bin !L --output rt-thread.bin</UserProg1Name>
<UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或