[bsp][amebaz]支持IAR工程及smartconfig配网

bsp/amebaz/.config

@@ -19,7 +19,7 @@ CONFIG_RT_IDEL_HOOK_LIST_SIZE=4
 CONFIG_IDLE_THREAD_STACK_SIZE=256
 CONFIG_RT_USING_TIMER_SOFT=y
 CONFIG_RT_TIMER_THREAD_PRIO=4
-CONFIG_RT_TIMER_THREAD_STACK_SIZE=512
+CONFIG_RT_TIMER_THREAD_STACK_SIZE=1024
 CONFIG_RT_DEBUG=y
 # CONFIG_RT_DEBUG_INIT_CONFIG is not set
 # CONFIG_RT_DEBUG_THREAD_CONFIG is not set
@@ -229,7 +229,10 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
 # AT commands
 #
 # CONFIG_RT_USING_AT is not set
-# CONFIG_LWIP_USING_DHCPD is not set
+CONFIG_LWIP_USING_DHCPD=y
+CONFIG_DHCPD_SERVER_IP="192.168.169.1"
+CONFIG_DHCPD_USING_ROUTER=y
+# CONFIG_LWIP_USING_CUSTOMER_DNS_SERVER is not set
 
 #
 # VBUS(Virtual Software BUS)
@@ -408,5 +411,10 @@ CONFIG_PKG_REALTEK_AMEBA_VER="latest"
 # CONFIG_SYS_AUTO_UPDATE_PKGS is not set
 # CONFIG_SYS_CREATE_MDK_IAR_PROJECT is not set
 # CONFIG_SYS_PKGS_DOWNLOAD_ACCELERATE is not set
+
+#
+# External Libraries
+#
+CONFIG_RT_USING_SMARTCONFIG_LIB=y
 # CONFIG_BSP_USING_UART0 is not set
 CONFIG_BSP_USING_WIFI=y

bsp/amebaz/Kconfig

@@ -26,6 +26,7 @@ config $ENV_DIR
 source "$RTT_DIR/Kconfig"
 source "$PKGS_DIR/Kconfig"
 source "$ENV_DIR/tools/scripts/cmds/Kconfig"
+source "$BSP_DIR/libraries/Kconfig"
 source "$BSP_DIR/drivers/Kconfig"
 
 select PKG_USING_REALTEK_AMEBA

bsp/amebaz/README.md

 # amebaz on RT-Thread
 
-## 1. 简介
+## 1 简介
 
-amebaz 是由Realtek推出的Cortex-M4内核的WiFi SOC芯片rtl8710b系列
-包括如下硬件特性：
+amebaz 是由Realtek推出的Cortex-M4内核的WiFi SOC芯片，属于rtl8710b系列。硬件特性如下：
 
 | 硬件 | 描述 |
 | -- | -- |
@@ -11,8 +10,7 @@ amebaz 是由Realtek推出的Cortex-M4内核的WiFi SOC芯片rtl8710b系列
 |CPU| Cortex-M4 |
 |主频| 125MHz |
 
-## 2. 编译说明
-
+## 2 编译说明
 
 | 环境         | 说明                                                         |
 | ------------ | ------------------------------------------------------------ |
@@ -21,15 +19,33 @@ amebaz 是由Realtek推出的Cortex-M4内核的WiFi SOC芯片rtl8710b系列
 | 构建工具     | scons                                               |
 | 依赖软件环境 | Env工具/(IAR或arm-none-eabi-gcc)/git/调试器驱动         |
 
-1) 下载源码
+## 3 下载源码
 
 ```bash
     git clone https://github.com/RT-Thread/rt-thread.git
 ```
 
-2) 配置工程并准备env
+## 4 环境准备
 
-（Linux/Mac）
+### 4.1 Windows 环境准备
+
+Windows环境下有两种开发环境，`GCC toolchain` 和 `IAR IDE`，根据不同的需求自行选择。
+
+#### 4.1.1 IAR 发开环境
+
+IAR 开发环境需要开发者自己安装软件，安装过程这里就不特别说明了。amebaz工程当前仅支持 `IAR 7.X` 的版本。
+
+#### 4.4.2 GCC 开发环境
+
+GCC开发使用 RT-Thread 官方提供的 env 工具，该工具集成 GCC 工具链，还具有编译构建环境、图形化系统配置及软件包管理功能。
+
+下载地址：[点击下载env工具](https://www.rt-thread.org/page/download.html)
+
+第一次使用env工具的开发者可以去这里查看教程：[RT-Thread env 工具用户手册](https://www.rt-thread.org/document/site/rtthread-development-guide/rtthread-tool-manual/env/env-user-manual/)。
+
+### 4.2 Linux/Mac 环境准备
+
+Linux/Mac 仅支持 GCC 工具链。
 
 ```bash
     cd rt-thread/bsp/amebaz
@@ -38,49 +54,62 @@ amebaz 是由Realtek推出的Cortex-M4内核的WiFi SOC芯片rtl8710b系列
     pkgs --upgrade
 ```
 
-（Windows）
+## 5 配置工程（可选）
 
->在[RT-Thread官网][1]下载ENV工具包，并参考官网给出的env使用教程
+### 5.1 Windows 配置工程
 
-3) 配置工程（可选）
-
-（Linux/Mac）
+配置工程，需要在相应的工程目录下使用 `menuconfig` 命令打开图形界面，开发者根据自己的需求开关功能组件。
 
 ```bash
-    scons --menuconfig
+    menuconfig
 ```
 
-（Windows(ENV环境中)）
+### 5.2 Linux/Mac 配置工程
+
+（Linux/Mac）
 
 ```bash
-    menuconfig
+    scons --menuconfig
 ```
 
-4) 下载package
+## 6 更新软件包
 
-amebaz配套的驱动库以package形式提供，故需先下载对应的package(realtek-ameba)，请使用env下载package
+amebaz 配套的驱动库以 package 形式提供，故需先下载对应的 package(realtek-ameba)，在工程目录下，使用下面命令下载软件包。
 
 ```bash
     pkgs --update
 ```
 
-*该板级支持包不支持生成mdk的工程及iar工程，后续会支持iar工程
+## 7 编译
+
+### 7.1 Windows 编译工程
+
+#### 7.1.1 IAR 编译工程
 
-5) 编译
+先打开工程目录下的IAR工程（project.eww），然后单击 Project 选项卡，单击 Rebuild All 选项，进行编译
 
-Windows可以使用env编译工程，无需设置GCC工具链路径，直接在bsp/amebaz工程目录下编译即可。
+![ ](figures/iar_build.png)
 
-（Linux/Mac arm-none-eabi-gcc）
-使用以下指令设置gcc路径
+#### 7.1.2 GCC 编译工程
+
+可以使用env编译工程，无需设置GCC工具链路径，直接在 rt-thread/bsp/amebaz 工程目录下输入 `scons` 编译即可。编译完成后，在工程目录下生成 `image2_all_ota1.bin` 文件。
+
+```bash
+    scons
+```
+
+### 7.2 Linux/Mac 编译工程
+
+如果没有配置GCC路径的环境变量，则需要使用以下指令设置gcc路径。
 
 ```bash
     export RTT_EXEC_PATH=[GCC路径]
 ```
 
-编译（WindowsLinux/Mac arm-none-eabi-gcc）
+设置 GCC 路径后，使用 `scons` 编译工程。
 
 ```bash
-    scons -j4
+    scons
 ```
 
 出现下列信息即为编译成功
@@ -109,35 +138,75 @@ Done...
 scons: done building targets.
 ```
 
-如果编译正确无误，会产生image2_all_ota1.bin文件。
+如果编译正确无误，会在工程目录下生成 image2_all_ota1.bin 文件。
+
+## 8 烧写及执行
 
-## 3. 烧写及执行
+### 8.1 IAR下载
 
-烧写可以使用仿真器 串口等多种方式 此处不再赘述
+下载程序分为两部分：
 
-### 3.1 运行结果
+（a）先使用jlink工具正确连接A14(CLK),A15(TMS),GND,VCC引脚
 
-如果编译 & 烧写无误，会在专用日志串口*上看到RT-Thread的启动logo信息：
+（b）打开 IAR 工程并完成编译后，单击 Project 选项卡下 Download 选项，选择 Download active application 下载程序。
+
+![IAR下载程序](figures/iar_download.png)
+
+（c）短按复位按钮，连接串口查看调试信息
+
+### 8.2 串口下载
+
+串口下载分为三个步骤
+
+（a）板子进入下载模式
+
+板子使用 `micros usb` 上电，然后按住 `FLASH` 键不放手，短按 `RST` 键，松开 `RST` 和 `FLASH` 键进入下载模式。
+
+（b）配置下载工具
+
+打开 Image Tool 下载工具配置使用，选择 `micros usb` 所对应的串口端口，选择波特率，默认波特率 1.5Mbps，然后打开串口端口，如下载工具图“①”所示
+
+![串口下载程序](figures/image-tool_v2.2.0.png)
+
+boot选择工程提供的 `boot_all.bin`, OTA1 选择生成的 image2_all_ota1.bin 文件（通常在工程目录下），并且注意在这两个选项前面打勾确认，其他默认即可，如下载工具图“②”。
+
+（c）下载程序
+
+按下 Download（如下载工具图 “③”），即可开始下载程序，并且可以从日志窗口查看到下载信息。
+
+## 9 运行
+
+下载程序后，连接串口（默认使用板子上 `micro usb`），打开串口工具，配置串口波特率 115200，数据位 8 位，停止位 1 位，无校验，无流控；短按 `RST` 键复位，串口将输出调试信息，如下所示：
 
 ```bash
  \ | /
 - RT -     Thread Operating System
- / | \     3.0.4 build May 15 2018
+ / | \     3.1.1 build Oct 25 2018
  2006 - 2018 Copyright by rt-thread team
-msh />
-```
+lwIP-2.0.2 initialized!
+
+Initializing WIFI ...
+LDO Mode, BD_Info: 0
 
-*默认串口
+LDO Mode, BD_Info: 0
 
-## 4. WIFI简单使用
+WIFI initialized
+[I/WIFI] amebaz_wifi_start success
+build time: Oct 25 2018 10:52:02
+Hello RT-Thread!
+[I/WLAN.dev] wlan init success
+[I/WLAN.lwip] eth device init ok name:w0
+msh >
+```
 
+## 10 WIFI简单使用
 
-### 4.1 wifi扫描命令
+### wifi扫描命令
 
 wifi 扫描命令格式如下
 
-```unknown
- wifi scan
+```bash
+    wifi scan
 ```
 
 命令说明  
@@ -149,8 +218,7 @@ wifi 扫描命令格式如下
 
 在调试工具中输入该命令，即可进行 wifi 命令扫描，调试信息如下
 
-```unknown
-
+```bash
 scan ap down
              SSID                      MAC              security    rssi   chn    Mbps
 ------------------------------- -----------------    -------------- ----   ---    ----
@@ -159,19 +227,16 @@ WQ1                             88:25:93:94:51:54    WPA2_AES_PSK    -76    13
 shyc1                           a0:40:a0:a3:e8:c9    WPA2_AES_PSK    -77    13    0
 KVIP                            70:65:82:3b:71:43    WPA2_AES_PSK    -83    11    0
 YST2016                         88:25:93:c6:67:d1    WPA2_TKIP_PSK   -84     4    0
-
 ```
 
-> 注：
->
-> 测试命令有关 wifi,均以wifi开头。
+> 注：wifi 有关的命令，均以wifi开头。
 
-### 4.2 wifi 接入
+### wifi 接入
 
 接入 wifi 之前，先介绍一下其接入的命令 ，如下
 
-```unknown
- wifi join ssid 123456789
+```bash
+    wifi join ssid 123456789
 ```
 
 命令说明
@@ -185,7 +250,7 @@ YST2016                         88:25:93:c6:67:d1    WPA2_TKIP_PSK   -84     4
 
 了解上述命令，并且成功完成前面步骤，在串口中输入 `wifi w0 join realthread_VIP 123456789` ，如下日志表示连接成功
 
-```unknown
+```bash
 
 WIFI  wlan0 Setting:
 ==============================
@@ -200,8 +265,7 @@ WIFI  wlan0 Setting:
 
 另外，提供一个简单的测试使用命令，查询设备IP地址命令：ifconfig。
 
-```unknown
-
+```bash
 network interface: w0 (Default)
 MTU: 1500
 MAC: 00 e0 4c d5 ac 46
@@ -211,21 +275,16 @@ gw address: 172.16.200.1
 net mask  : 255.255.255.0
 dns server #0: 172.16.200.1
 dns server #1: 223.5.5.5
-
 ```
 
-## 5. 驱动支持情况及计划
+## 驱动支持情况及计划
 
 | 驱动       | 支持情况 | 备注                         |
 | ---------- | :------: | :--------------------------: |
 | UART       | 支持     | UART0                        |
 | WLAN       | 部分支持 | 仅支持STA模式                |
 
-## 6. 已知问题
-
-wlan仅支持STA模式，连接WIFI输入错误密码时，会宕机。
-
-## 7. 联系人信息
+## 联系人信息
 
 维护人:
 [flyingcys][4] < [flyingcys@163.com][5] >

bsp/amebaz/applications/smartconfig_app.c

+/*
+ * File      : smartconfig_demo.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2006 - 2018, RT-Thread Development Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-09-13     Bernard      the first version
+ */
+#include <rtthread.h>
+#include <rtdevice.h>
+
+#ifdef RT_USING_SMARTCONFIG_LIB
+
+#include <sys/socket.h>
+#include "smartconfig.h"
+
+#define NET_READY_TIME_OUT       (rt_tick_from_millisecond(30 * 1000))
+
+static int rt_wlan_device_connetct(char *ssid, char *passwd)
+{
+    int result = RT_EOK;
+    rt_uint8_t time_cnt = 0;
+
+    result = rt_wlan_connect(ssid, passwd);
+    if (result != RT_EOK)
+    {
+        rt_kprintf("\nconnect ssid %s error:%d!\n", ssid, result);
+        return result;
+    };
+
+    do
+    {
+        rt_thread_mdelay(1000);
+        time_cnt ++;
+        if (rt_wlan_is_ready())
+        {
+            break;
+        }
+    }
+    while (time_cnt <= (NET_READY_TIME_OUT / 1000));
+
+    if (time_cnt <= (NET_READY_TIME_OUT / 1000))
+    {
+        rt_kprintf("networking ready!\n");
+    }
+    else
+    {
+        rt_kprintf("wait ip got timeout!\n");
+        result = -RT_ETIMEOUT;
+    }
+
+    return result;
+}
+
+static void airkiss_send_notification(uint8_t random)
+{
+    int sock = -1;
+    int udpbufsize = 2;
+    struct sockaddr_in UDPBCAddr, UDPBCServerAddr;
+
+    sock = socket(AF_INET, SOCK_DGRAM, 0);
+    if (sock < 0)
+    {
+        rt_kprintf("notify create socket error!\n");
+        goto _exit;
+    }
+
+    UDPBCAddr.sin_family = AF_INET;
+    UDPBCAddr.sin_port = htons(10000);
+    UDPBCAddr.sin_addr.s_addr = htonl(0xffffffff);
+    rt_memset(&(UDPBCAddr.sin_zero), 0, sizeof(UDPBCAddr.sin_zero));
+
+    UDPBCServerAddr.sin_family = AF_INET;
+    UDPBCServerAddr.sin_port = htons(10000);
+    UDPBCServerAddr.sin_addr.s_addr = htonl(INADDR_ANY);
+    rt_memset(&(UDPBCServerAddr.sin_zero), 0, sizeof(UDPBCServerAddr.sin_zero));
+
+    if (setsockopt(sock, SOL_SOCKET, SO_BROADCAST, &udpbufsize, sizeof(int)) != 0)
+    {
+        rt_kprintf("notify socket setsockopt error\n");
+        goto _exit;
+    }
+
+    if (bind(sock, (struct sockaddr *)&UDPBCServerAddr, sizeof(UDPBCServerAddr)) != 0)
+    {
+        rt_kprintf("notify socket bind error\n");
+        goto _exit;
+    }
+
+    for (int i = 0; i <= 20; i++)
+    {
+        int ret = sendto(sock, (char *)&random, 1, 0, (struct sockaddr *)&UDPBCAddr, sizeof(UDPBCAddr));
+        rt_thread_delay(10);
+    }
+
+    rt_kprintf("airkiss notification thread exit!\n");
+
+_exit:
+    if (sock >= 0)
+    {
+        closesocket(sock);
+    }
+}
+
+static int smartconfig_result(rt_smartconfig_type result_type, char *ssid, char *passwd, void *userdata, rt_uint8_t userdata_len)
+{
+    rt_uint8_t random = *(rt_uint8_t *)userdata;
+
+    rt_kprintf("type:%d\n", result_type);
+    rt_kprintf("ssid:%s\n", ssid);
+    rt_kprintf("passwd:%s\n", passwd);
+    rt_kprintf("user_data:0x%02x\n", random);
+    if (rt_wlan_device_connetct(ssid, passwd) == RT_EOK)
+    {
+        airkiss_send_notification(random);
+    }
+
+    return 0;
+}
+
+void smartconfig_demo(void)
+{
+    rt_smartconfig_start(SMARTCONFIG_TYPE_AIRKISS, SMARTCONFIG_ENCRYPT_NONE, RT_NULL, smartconfig_result);
+}
+
+#ifdef RT_USING_FINSH
+#include "finsh.h"
+MSH_CMD_EXPORT(smartconfig_demo, smartconfig demo);
+#endif
+
+#endif

bsp/amebaz/drivers/board.c

@@ -12,10 +12,8 @@
  * 2009-01-05     Bernard      first implementation
  * 2018-03-15     flyingcys    add amebaz
  */
+#include <rtl8710b.h>
 #include <stdint.h>
-#include <rthw.h>
-#include <rtthread.h>
-
 #include "board.h"
 #include "drv_uart.h"
 
@@ -87,7 +85,7 @@ void rt_hw_board_init(void)
 {
     extern uint32_t SystemCoreClock;
     SysTick_Config(SystemCoreClock/RT_TICK_PER_SECOND);
-    
+
 #ifdef RT_USING_HEAP
         rt_system_heap_init((void*)HEAP_BEGIN, (void*)HEAP_END);
 #endif

bsp/amebaz/drivers/board.h

@@ -17,7 +17,17 @@
 #ifndef __BOARD_H__
 #define __BOARD_H__
 
-#include "rtl8710b.h"
+#ifdef _LITTLE_ENDIAN
+#undef _LITTLE_ENDIAN
+#endif
+
+#ifdef SECTION
+#undef SECTION
+#endif
+
+#include <rthw.h>
+#include <rtthread.h>
+#include <rtdevice.h>
 
 void rt_hw_board_init(void);
 

bsp/amebaz/drivers/drv_uart.c

@@ -22,11 +22,8 @@
  * 2017-05-30     Bernard      the first version
  * 2018-03-15     flyingcys    add amebaz
  */
-
-#include <rthw.h>
-#include <rtthread.h>
-#include <rtdevice.h>
-
+#include <rtl8710b.h>
+#include <serial_api.h>
 #include "board.h"
 #include "drv_uart.h"
 
@@ -37,6 +34,8 @@ struct device_uart
     rt_uint32_t irqno;
 };
 
+extern int LOGUART_SetBaud(u32 BaudRate);
+
 #ifdef BSP_USING_UART0
 static struct rt_serial_device  serial0;
 static struct device_uart       uart0;
@@ -64,7 +63,6 @@ const struct rt_uart_ops _uart_ops =
  */
 static rt_err_t ameba_uart_configure (struct rt_serial_device *serial, struct serial_configure *cfg)
 {
-     rt_uint32_t baud_div;
      struct device_uart * uart;
 
      RT_ASSERT(serial != RT_NULL);

bsp/amebaz/drivers/drv_uart.h

@@ -26,9 +26,6 @@
 #ifndef __DRV_UART_H__
 #define __DRV_UART_H__
 
-#include "ameba_soc.h"
-#include "serial_api.h"
-
 #if defined(CONFIG_PLATFORM_8711B)
 // 8710B
 #define UART_TX PA_23

bsp/amebaz/drivers/wlan/drv_wifi.c

@@ -25,8 +25,6 @@
 #include <skbuff.h>
 #include "board.h"
 #include <string.h>
-#include <drv_wlan.h>
-#include <wlan_dev.h>
 #include "drv_wlan.h"
 #include "drv_wifi.h"
 
@@ -153,8 +151,11 @@ static void rtw_connect_callbackfn(char *buf, int len, int flags, void *user_dat
     struct ameba_wifi *wifi = user_data;
 
     LOG_D("L:%d wifi connect callback flags:%d user_data:%08x", __LINE__, flags, user_data);
-    wifi->connected = 1;
-    rt_wlan_dev_indicate_event_handle(wifi->wlan, RT_WLAN_DEV_EVT_CONNECT, RT_NULL);
+    if( wifi_is_connected_to_ap() == 0)
+    {
+        wifi->connected = 1;
+        rt_wlan_dev_indicate_event_handle(wifi->wlan, RT_WLAN_DEV_EVT_CONNECT, RT_NULL);
+    }
 }
 
 static void rtw_connect_fail_callbackfn(char *buf, int len, int flags, void *user_data)
@@ -371,7 +372,7 @@ static rt_err_t rthw_wlan_join                 (struct rt_wlan_device *wlan, str
             ssid = &sta_info->ssid.val[0];
         if (sta_info->key.len > 0)
             key = &sta_info->key.val[0];
-        LOG_D("bssid connect bssid: %02x:%02x:%02x:%02x:%02x:%02x ssid:%s ssid_len:%d key:%s key_len%d", 
+            LOG_D("bssid connect bssid: %02x:%02x:%02x:%02x:%02x:%02x ssid:%s ssid_len:%d key:%s key_len%d", 
             sta_info->bssid[0],sta_info->bssid[1],sta_info->bssid[2],sta_info->bssid[3],sta_info->bssid[4],sta_info->bssid[5],
             ssid, 
             sta_info->ssid.len,
@@ -649,11 +650,8 @@ int rthw_wifi_low_init(void)
     LOG_I("amebaz_wifi_start success");
     LOG_D("F:%s L:%d wifi_sta:0x%08x   wifi_ap:0x%08x", __FUNCTION__, __LINE__, &wifi_sta, &wifi_ap);
 
-    wifi_reg_event_handler(0, rtw_connect_callbackfn, &wifi_sta);
-    wifi_reg_event_handler(1, rtw_disconnect_callbackfn, &wifi_sta);
-
-    wifi_reg_event_handler(8, rtw_sta_assoc_callbackfn, &wifi_ap);
-    wifi_reg_event_handler(9, rtw_sta_disassoc_callbackfn, &wifi_ap);
+    wifi_reg_event_handler(RTHW_WIFI_EVENT_FOURWAY_HANDSHAKE_DONE, rtw_connect_callbackfn, &wifi_sta);
+    wifi_reg_event_handler(RTHW_WIFI_EVENT_DISCONNECT, rtw_disconnect_callbackfn, &wifi_sta);
 
     _init_flag = 1;
 

bsp/amebaz/drivers/wlan/drv_wlan.c

@@ -26,15 +26,7 @@
 #include "wifi_constants.h"
 #include <wifi/wifi_util.h>
 #include <wifi/wifi_conf.h>
-
-#ifdef _LITTLE_ENDIAN
-#undef _LITTLE_ENDIAN
-#endif
-
-#include <rthw.h>
-#include <rtthread.h>
-#include <rtdevice.h>
-#include <wlan_dev.h>
+#include "board.h"
 #include "drv_wlan.h"
 
 // #define SCAN_WAIT_TIME       (10000)
@@ -349,7 +341,7 @@ static void rthw_wifi_promisc_callback(unsigned char *buf, unsigned int len, voi
 {
     if (monitor_callback)
     {
-        monitor_callback(buf, len, RT_NULL);
+        monitor_callback(userdata, len, RT_NULL);
     }
 }
 
@@ -372,4 +364,3 @@ void rthw_wifi_monitor_enable(int enable)
         rthw_wifi_stop();
     }
 }
-

bsp/amebaz/drivers/wlan/drv_wlan.h

@@ -25,8 +25,6 @@
 #ifndef __DRV_WLAN_H__
 #define __DRV_WLAN_H__
 
-#include <rtthread.h>
-
 typedef enum 
 {
 	RTHW_MODE_NONE = 0,
@@ -65,6 +63,26 @@ typedef enum {
     RTHW_SECURITY_FORCE_32_BIT   = 0x7fffffff                                        /**< Exists only to force rtw_security_t type to 32 bits */
 } rthw_security_t;
 
+typedef enum {
+    RTHW_WIFI_EVENT_CONNECT = 0,
+    RTHW_WIFI_EVENT_DISCONNECT = 1,
+    RTHW_WIFI_EVENT_FOURWAY_HANDSHAKE_DONE = 2,	
+    RTHW_WIFI_EVENT_SCAN_RESULT_REPORT = 3,
+    RTHW_WIFI_EVENT_SCAN_DONE = 4,
+    RTHW_WIFI_EVENT_RECONNECTION_FAIL = 5,
+    RTHW_WIFI_EVENT_SEND_ACTION_DONE = 6,
+    RTHW_WIFI_EVENT_RX_MGNT = 7,
+    RTHW_WIFI_EVENT_STA_ASSOC = 8,
+    RTHW_WIFI_EVENT_STA_DISASSOC = 9,
+    RTHW_WIFI_EVENT_STA_WPS_START = 10,
+    RTHW_WIFI_EVENT_WPS_FINISH = 11,
+    RTHW_WIFI_EVENT_EAPOL_START = 12,
+    RTHW_WIFI_EVENT_EAPOL_RECVD = 13,
+    RTHW_WIFI_EVENT_NO_NETWORK = 14,
+    RTHW_WIFI_EVENT_BEACON_AFTER_DHCP = 15,
+    RTHW_WIFI_EVENT_MAX,
+}rthw_event_indicate_t;
+
 typedef enum {
     RTHW_802_11_BAND_5GHZ   = 0, /**< Denotes 5GHz radio band   */
     RTHW_802_11_BAND_2_4GHZ = 1  /**< Denotes 2.4GHz radio band */
@@ -72,13 +90,13 @@ typedef enum {
 
 struct rthw_wlan_info
 {
-	char *ssid;
+    char *ssid;
     rt_uint8_t *bssid;
     rthw_802_11_band_t band;
     rt_uint32_t datarate;
     rt_uint16_t channel;
     rt_int16_t  rssi;
-	rthw_security_t security;
+    rthw_security_t security;
 };
 
 typedef void (*scan_callback_fn)(struct rthw_wlan_info *info, void *user_data);

bsp/amebaz/libraries/Kconfig

+menu "External Libraries"
+
+    config RT_USING_SMARTCONFIG_LIB
+        bool "Using RT-Thrad SmartConfig Library"
+        default n
+
+endmenu

bsp/amebaz/libraries/SConscript

+import os
+from building import *
+
+objs = []
+cwd  = GetCurrentDir()
+list = os.listdir(cwd)
+
+for item in list:
+    if os.path.isfile(os.path.join(cwd, item, 'SConscript')):
+        objs = objs + SConscript(os.path.join(item, 'SConscript'))
+
+Return('objs')

bsp/amebaz/libraries/smartconfig/SConscript

+Import('rtconfig')
+from building import *
+
+cwd = GetCurrentDir()
+src = []
+path = [cwd + '/inc']
+libs = ['']
+libpath = [cwd + '/libs']
+
+if rtconfig.CROSS_TOOL == 'gcc':
+    libs += ['libsmartconfig_armcm4_gcc']
+elif rtconfig.CROSS_TOOL == 'iar':
+    libs += ['libsmartconfig_armcm4_iar']
+
+group = DefineGroup('smartconfig', src, depend = ['RT_USING_SMARTCONFIG_LIB'], CPPPATH = path, LIBS = libs, LIBPATH = libpath)
+
+Return('group')
+

bsp/amebaz/libraries/smartconfig/inc/smartconfig.h

+/*
+ * File      : smartconfig.h
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2006 - 2018, RT-Thread Development Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-09-13     Bernard      the first version
+ */
+#ifndef __SMARTCONFIG_H__
+#define __SMARTCONFIG_H__
+
+#define SMARTCONFIG_EVENT_CHANGE_CHANNEL    (1 << 0)
+#define SMARTCONFIG_EVENT_LOCKED_CHANNEL    (1 << 1)
+#define SMARTCONFIG_EVENT_COMPLETE          (1 << 2)
+#define SMARTCONFIG_EVENT_RESTART           (1 << 3)
+#define SMARTCONFIG_EVENT_STOP              (1 << 4)
+
+typedef enum
+{
+    SMARTCONFIG_TYPE_AIRKISS = 0,
+    SMARTCONFIG_TYPE_JDSMART = 1,
+    SMARTCONFIG_TYPE_ESPTOUCH,
+    SMARTCONFIG_TYPE_REALTOUCH,
+    SMARTCONFIG_TYPE_ALL,
+    SMARTCONFIG_TYPE_MAX,
+} rt_smartconfig_type;
+
+typedef enum
+{
+    SMARTCONFIG_ENCRYPT_NONE,
+    SMARTCONFIG_ENCRYPT_AES,
+} rt_smartconfig_encrypt_type;
+
+typedef int (*rt_smartconfig_result_cb)(rt_smartconfig_type result_type, char *ssid, char *passwd, \
+                                        void *userdata, rt_uint8_t userdata_len);
+typedef void (*rt_smartconfig_event_handle)(rt_uint32_t event, void *userdata);
+
+int rt_smartconfig_start(rt_smartconfig_type config_type, rt_smartconfig_encrypt_type encrypt_type, char *encrypt, \
+                         rt_smartconfig_result_cb result_cb);
+
+int rt_smartconfig_stop(void);
+
+void rt_smartconfig_set_event_handle(rt_smartconfig_event_handle handle, void *userdata);
+
+char *rt_smartconfig_version(void);
+
+#endif

bsp/amebaz/project.eww

+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>
+  <project>
+    <path>$WS_DIR$\project.ewp</path>
+  </project>
+  <batchBuild/>
+</workspace>
+
+

bsp/amebaz/rtconfig.h

@@ -17,7 +17,7 @@
 #define IDLE_THREAD_STACK_SIZE 256
 #define RT_USING_TIMER_SOFT
 #define RT_TIMER_THREAD_PRIO 4
-#define RT_TIMER_THREAD_STACK_SIZE 512
+#define RT_TIMER_THREAD_STACK_SIZE 1024
 #define RT_DEBUG
 
 /* Inter-Thread communication */
@@ -151,6 +151,9 @@
 
 /* AT commands */
 
+#define LWIP_USING_DHCPD
+#define DHCPD_SERVER_IP "192.168.169.1"
+#define DHCPD_USING_ROUTER
 
 /* VBUS(Virtual Software BUS) */
 
@@ -216,6 +219,10 @@
 
 /* Env config */
 
+
+/* External Libraries */
+
+#define RT_USING_SMARTCONFIG_LIB
 #define BSP_USING_WIFI
 
 #endif

bsp/amebaz/rtconfig.py

@@ -66,32 +66,6 @@ if PLATFORM == 'gcc':
 
     M_CFLAGS = CFLAGS + ' -mlong-calls  -Dsourcerygxx -O0 -fPIC '
     M_LFLAGS = DEVICE + ' -Wl,-z,max-page-size=0x4 -shared -fPIC -e main -nostdlib'
-	
-elif PLATFORM == 'armcc':
-    # toolchains
-    CC = 'armcc'
-    AS = 'armasm'
-    AR = 'armar'
-    LINK = 'armlink'
-    TARGET_EXT = 'axf'
-
-    DEVICE = ' --cpu=cortex-m4.fp'
-    CFLAGS = DEVICE + ' --apcs=interwork -DSTM32F429_439xx'
-    AFLAGS = DEVICE
-    LFLAGS = DEVICE + ' --info sizes --info totals --info unused --info veneers --list rtthread-stm32.map --scatter stm32f429_flash.sct'
-
-    CFLAGS += ' -I' + EXEC_PATH + '/ARM/RV31/INC'
-    LFLAGS += ' --libpath ' + EXEC_PATH + '/ARM/RV31/LIB'
-
-    EXEC_PATH += '/arm/bin40/'
-
-    if BUILD == 'debug':
-        CFLAGS += ' -g -O0'
-        AFLAGS += ' -g'
-    else:
-        CFLAGS += ' -O2'
-
-    POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
 
 elif PLATFORM == 'iar':
     # toolchains
@@ -101,7 +75,7 @@ elif PLATFORM == 'iar':
     LINK = 'ilinkarm'
     TARGET_EXT = 'out'
 
-    DEVICE = ' -D USE_STDPERIPH_DRIVER' + ' -D STM32F10X_HD'
+    DEVICE = '-Dewarm'
 
     CFLAGS = DEVICE
     CFLAGS += ' --diag_suppress Pa050'
@@ -112,26 +86,31 @@ elif PLATFORM == 'iar':
     CFLAGS += ' --no_tbaa'
     CFLAGS += ' --no_clustering'
     CFLAGS += ' --no_scheduling'
-    CFLAGS += ' --debug'
     CFLAGS += ' --endian=little'
     CFLAGS += ' --cpu=Cortex-M4'
     CFLAGS += ' -e'
     CFLAGS += ' --fpu=None'
     CFLAGS += ' --dlib_config "' + EXEC_PATH + '/arm/INC/c/DLib_Config_Normal.h"'
-    CFLAGS += ' -Ol'
-    CFLAGS += ' --use_c++_inline'
+    CFLAGS += ' --silent'
 
-    AFLAGS = ''
+    AFLAGS = DEVICE
     AFLAGS += ' -s+'
     AFLAGS += ' -w+'
     AFLAGS += ' -r'
     AFLAGS += ' --cpu Cortex-M4'
     AFLAGS += ' --fpu None'
+    AFLAGS += ' -S'
+
+    if BUILD == 'debug':
+        CFLAGS += ' --debug'
+        CFLAGS += ' -On'
+    else:
+        CFLAGS += ' -Oh'
 
-    LFLAGS = ' --config stm32f429_flash.icf'
+    LFLAGS = ' --config rom_symbol_v01_iar.icf'
     LFLAGS += ' --redirect _Printf=_PrintfTiny'
     LFLAGS += ' --redirect _Scanf=_ScanfSmall'
     LFLAGS += ' --entry __iar_program_start'
 
     EXEC_PATH = EXEC_PATH + '/arm/bin/'
-    POST_ACTION = ''
+    POST_ACTION = 'ielftool --bin $TARGET rt-thread.bin'

bsp/amebaz/template.eww

+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>
+  <project>
+    <path>$WS_DIR$\template.ewp</path>
+  </project>
+  <batchBuild/>
+</workspace>
+
+

bsp/amebaz/tmp.board

+<?xml version="1.0" encoding="iso-8859-1"?> 
+  
+<flash_board> 
+  <pass>    
+    <range>CODE 0x8000000 0x8004fff</range>    
+    <loader>$PROJ_DIR$\packages\realtek_ameba-latest\sdk-ameba-v4.0b_without_NDA_GCC_V1.0.0\component\soc\realtek\8711b\misc\iar_utility\common\flashloader\FlashRTL8195aMP.flash</loader>    
+    <abs_offset>0x00000000</abs_offset>    
+  </pass>    
+  <pass> 
+    <range>CODE 0x800b020 0x807ffff</range> 
+    <loader>$PROJ_DIR$\packages\realtek_ameba-latest\sdk-ameba-v4.0b_without_NDA_GCC_V1.0.0\component\soc\realtek\8711b\misc\iar_utility\common\flashloader\FlashRTL8195aMP.flash</loader>    
+    <abs_offset>0xb020</abs_offset>  
+  </pass> 
+  <pass>    
+    <range>CODE 0x10005000 0x10005A9B</range>    
+    <loader>$PROJ_DIR$\packages\realtek_ameba-latest\sdk-ameba-v4.0b_without_NDA_GCC_V1.0.0\component\soc\realtek\8711b\misc\iar_utility\common\flashloader\FlashRTL8195aMP.flash</loader>      
+    <abs_offset>0xb000</abs_offset>    
+    <args>--concat</args>    
+  </pass>    
+  <ignore>CODE 0x10005a9c 0x1003dfff</ignore> 
+</flash_board>