未验证 提交 05cfeac3 编写于 作者: B Bernard Xiong 提交者: GitHub

Merge pull request #1148 from uestczyh222/master

[BSP][STM32F4xx-HAL]Update clock tree
......@@ -10,6 +10,7 @@
* Change Logs:
* Date Author Notes
* 2009-09-22 Bernard add board.h to this bsp
* 2017-12-29 ZYH Correctly generate the 48M clock
*/
#include <rtthread.h>
......@@ -20,12 +21,24 @@
*/
/*@{*/
#ifdef RT_USING_HSI
#error Can not using HSI on this bsp
#endif
#if defined(RCC_PERIPHCLK_SDIO) || defined(RCC_PERIPHCLK_CEC) || defined(RCC_PERIPHCLK_LTDC)\
|| defined(RCC_PERIPHCLK_SPDIFRX) || defined(RCC_PERIPHCLK_FMPI2C1) || defined(RCC_PERIPHCLK_LPTIM1)
#warning Please give priority to the correctness of the clock tree when the peripherals are abnormal
#endif
static void SystemClock_Config(void)
{
rt_uint32_t hse_clk,sys_clk;
#if (RT_HSE_VALVE % 1000000 != 0)
#error HSE must be integer of MHz
#endif
hse_clk = HSE_VALUE/1000000UL;
sys_clk = HCLK_VALUE/1000000UL;
RCC_OscInitTypeDef RCC_OscInitStruct;
RCC_ClkInitTypeDef RCC_ClkInitStruct;
#ifdef RT_USING_RTC
#if defined(RT_USING_RTC) || defined(RCC_PERIPHCLK_CLK48)
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct;
#endif
/**Configure the main internal regulator output voltage
......@@ -44,10 +57,55 @@ static void SystemClock_Config(void)
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLM = (HSE_VALUE/1000000UL);//Get 1M clock
RCC_OscInitStruct.PLL.PLLN = (HCLK_VALUE/1000000UL)*2;//Get 2*HCLK_VALUE
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;//Get HCLK_VALUE
RCC_OscInitStruct.PLL.PLLQ = RCC_OscInitStruct.PLL.PLLN/48;//Get 48M Clock
if(hse_clk % 2 == 0)
{
RCC_OscInitStruct.PLL.PLLM = hse_clk/2;//Get 2M clock
if((sys_clk * 2) % 48 == 0)
{
RCC_OscInitStruct.PLL.PLLN = sys_clk;//Get 2*HCLK_VALUE
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;//Get HCLK_VALUE
}
else if((sys_clk * 4) % 48 == 0)
{
RCC_OscInitStruct.PLL.PLLN = sys_clk * 2;//Get 4*HCLK_VALUE
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4;//Get HCLK_VALUE
}
else if((sys_clk * 6) % 48 == 0)
{
RCC_OscInitStruct.PLL.PLLN = sys_clk * 3;//Get 6*HCLK_VALUE
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV6;//Get HCLK_VALUE
}
else if((sys_clk * 8) % 48 == 0)
{
RCC_OscInitStruct.PLL.PLLN = sys_clk * 4;//Get 8*HCLK_VALUE
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV8;//Get HCLK_VALUE
}
}
else
{
RCC_OscInitStruct.PLL.PLLM = hse_clk;//Get 1M clock
if((sys_clk * 2) % 48 == 0)
{
RCC_OscInitStruct.PLL.PLLN = sys_clk * 2;//Get 2*HCLK_VALUE
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;//Get HCLK_VALUE
}
else if((sys_clk * 4) % 48 == 0)
{
RCC_OscInitStruct.PLL.PLLN = sys_clk * 4;//Get 4*HCLK_VALUE
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4;//Get HCLK_VALUE
}
else if((sys_clk * 6) % 48 == 0)
{
RCC_OscInitStruct.PLL.PLLN = sys_clk * 6;//Get 6*HCLK_VALUE
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV6;//Get HCLK_VALUE
}
else if((sys_clk * 8) % 48 == 0)
{
RCC_OscInitStruct.PLL.PLLN = sys_clk * 8;//Get 8*HCLK_VALUE
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV8;//Get HCLK_VALUE
}
}
RCC_OscInitStruct.PLL.PLLQ = hse_clk / RCC_OscInitStruct.PLL.PLLM * RCC_OscInitStruct.PLL.PLLN/48;//Get 48M Clock
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
while(1)
......@@ -94,9 +152,16 @@ static void SystemClock_Config(void)
{}
}
#endif
#ifdef RT_USING_RTC
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC;
#if defined(RT_USING_RTC) || defined(RCC_PERIPHCLK_CLK48)
PeriphClkInitStruct.PeriphClockSelection = 0;
#ifdef RT_USING_RTC
PeriphClkInitStruct.PeriphClockSelection |= RCC_PERIPHCLK_RTC;
PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI;
#endif
#ifdef RCC_PERIPHCLK_CLK48
PeriphClkInitStruct.PeriphClockSelection |= RCC_PERIPHCLK_CLK48;
PeriphClkInitStruct.Clk48ClockSelection = RCC_CLK48CLKSOURCE_PLLQ;
#endif
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
{
while(1)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册