usb_device_descriptor.h

/*
 * The Clear BSD License
 * Copyright (c) 2015 - 2016, Freescale Semiconductor, Inc.
 * Copyright 2016-2017 NXP
 * All rights reserved.
 * 
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted (subject to the limitations in the disclaimer below) provided
 *  that the following conditions are met:
 *
 * o Redistributions of source code must retain the above copyright notice, this list
 *   of conditions and the following disclaimer.
 *
 * o Redistributions in binary form must reproduce the above copyright notice, this
 *   list of conditions and the following disclaimer in the documentation and/or
 *   other materials provided with the distribution.
 *
 * o Neither the name of the copyright holder nor the names of its
 *   contributors may be used to endorse or promote products derived from this
 *   software without specific prior written permission.
 *
 * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE.
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
#ifndef _USB_DEVICE_DESCRIPTOR_H_
#define _USB_DEVICE_DESCRIPTOR_H_ 1

/*******************************************************************************
* Definitions
******************************************************************************/
#define USB_DEVICE_SPECIFIC_BCD_VERSION (0x0200)
#define USB_DEVICE_DEMO_BCD_VERSION (0x0101U)

/* Communication  Class Codes */
#define CDC_COMM_CLASS (0x02)
/* Data  Class Codes */
#define CDC_DATA_CLASS (0x0A)

/* Communication Class SubClass Codes */
#define USB_CDC_DIRECT_LINE_CONTROL_MODEL (0x01)
#define USB_CDC_ABSTRACT_CONTROL_MODEL (0x02)
#define USB_CDC_TELEPHONE_CONTROL_MODEL (0x03)
#define USB_CDC_MULTI_CHANNEL_CONTROL_MODEL (0x04)
#define USB_CDC_CAPI_CONTROL_MOPDEL (0x05)
#define USB_CDC_ETHERNET_NETWORKING_CONTROL_MODEL (0x06)
#define USB_CDC_ATM_NETWORKING_CONTROL_MODEL (0x07)
#define USB_CDC_WIRELESS_HANDSET_CONTROL_MODEL (0x08)
#define USB_CDC_DEVICE_MANAGEMENT (0x09)
#define USB_CDC_MOBILE_DIRECT_LINE_MODEL (0x0A)
#define USB_CDC_OBEX (0x0B)
#define USB_CDC_ETHERNET_EMULATION_MODEL (0x0C)

/* Communication Class Protocol Codes */
#define USB_CDC_NO_CLASS_SPECIFIC_PROTOCOL (0x00) /*also for Data Class Protocol Code */
#define USB_CDC_AT_250_PROTOCOL (0x01)
#define USB_CDC_AT_PCCA_101_PROTOCOL (0x02)
#define USB_CDC_AT_PCCA_101_ANNEX_O (0x03)
#define USB_CDC_AT_GSM_7_07 (0x04)
#define USB_CDC_AT_3GPP_27_007 (0x05)
#define USB_CDC_AT_TIA_CDMA (0x06)
#define USB_CDC_ETHERNET_EMULATION_PROTOCOL (0x07)
#define USB_CDC_EXTERNAL_PROTOCOL (0xFE)
#define USB_CDC_VENDOR_SPECIFIC (0xFF) /*also for Data Class Protocol Code */

/* Data Class Protocol Codes */
#define USB_CDC_PYHSICAL_INTERFACE_PROTOCOL (0x30)
#define USB_CDC_HDLC_PROTOCOL (0x31)
#define USB_CDC_TRANSPARENT_PROTOCOL (0x32)
#define USB_CDC_MANAGEMENT_PROTOCOL (0x50)
#define USB_CDC_DATA_LINK_Q931_PROTOCOL (0x51)
#define USB_CDC_DATA_LINK_Q921_PROTOCOL (0x52)
#define USB_CDC_DATA_COMPRESSION_V42BIS (0x90)
#define USB_CDC_EURO_ISDN_PROTOCOL (0x91)
#define USB_CDC_RATE_ADAPTION_ISDN_V24 (0x92)
#define USB_CDC_CAPI_COMMANDS (0x93)
#define USB_CDC_HOST_BASED_DRIVER (0xFD)
#define USB_CDC_UNIT_FUNCTIONAL (0xFE)

/* Descriptor SubType in Communications Class Functional Descriptors */
#define USB_CDC_HEADER_FUNC_DESC (0x00)
#define USB_CDC_CALL_MANAGEMENT_FUNC_DESC (0x01)
#define USB_CDC_ABSTRACT_CONTROL_FUNC_DESC (0x02)
#define USB_CDC_DIRECT_LINE_FUNC_DESC (0x03)
#define USB_CDC_TELEPHONE_RINGER_FUNC_DESC (0x04)
#define USB_CDC_TELEPHONE_REPORT_FUNC_DESC (0x05)
#define USB_CDC_UNION_FUNC_DESC (0x06)
#define USB_CDC_COUNTRY_SELECT_FUNC_DESC (0x07)
#define USB_CDC_TELEPHONE_MODES_FUNC_DESC (0x08)
#define USB_CDC_TERMINAL_FUNC_DESC (0x09)
#define USB_CDC_NETWORK_CHANNEL_FUNC_DESC (0x0A)
#define USB_CDC_PROTOCOL_UNIT_FUNC_DESC (0x0B)
#define USB_CDC_EXTENSION_UNIT_FUNC_DESC (0x0C)
#define USB_CDC_MULTI_CHANNEL_FUNC_DESC (0x0D)
#define USB_CDC_CAPI_CONTROL_FUNC_DESC (0x0E)
#define USB_CDC_ETHERNET_NETWORKING_FUNC_DESC (0x0F)
#define USB_CDC_ATM_NETWORKING_FUNC_DESC (0x10)
#define USB_CDC_WIRELESS_CONTROL_FUNC_DESC (0x11)
#define USB_CDC_MOBILE_DIRECT_LINE_FUNC_DESC (0x12)
#define USB_CDC_MDLM_DETAIL_FUNC_DESC (0x13)
#define USB_CDC_DEVICE_MANAGEMENT_FUNC_DESC (0x14)
#define USB_CDC_OBEX_FUNC_DESC (0x15)
#define USB_CDC_COMMAND_SET_FUNC_DESC (0x16)
#define USB_CDC_COMMAND_SET_DETAIL_FUNC_DESC (0x17)
#define USB_CDC_TELEPHONE_CONTROL_FUNC_DESC (0x18)
#define USB_CDC_OBEX_SERVICE_ID_FUNC_DESC (0x19)

/* usb descritpor length */
#define USB_DESCRIPTOR_LENGTH_CONFIGURATION_ALL (67)
#define USB_DESCRIPTOR_LENGTH_CDC_HEADER_FUNC (5)
#define USB_DESCRIPTOR_LENGTH_CDC_CALL_MANAG (5)
#define USB_DESCRIPTOR_LENGTH_CDC_ABSTRACT (4)
#define USB_DESCRIPTOR_LENGTH_CDC_UNION_FUNC (5)

#define USB_DEVICE_CONFIGURATION_COUNT (1)
#define USB_DEVICE_STRING_COUNT (3)
#define USB_DEVICE_LANGUAGE_COUNT (1)

#define USB_CDC_VCOM_CONFIGURE_INDEX (1)

#define USB_CDC_VCOM_ENDPOINT_CIC_COUNT (1)
#define USB_CDC_VCOM_ENDPOINT_DIC_COUNT (2)
#define USB_CDC_VCOM_INTERRUPT_IN_ENDPOINT (1)
#define USB_CDC_VCOM_BULK_IN_ENDPOINT (2)
#define USB_CDC_VCOM_BULK_OUT_ENDPOINT (3)
#define USB_CDC_VCOM_INTERFACE_COUNT (2)
#define USB_CDC_VCOM_COMM_INTERFACE_INDEX (0)
#define USB_CDC_VCOM_DATA_INTERFACE_INDEX (1)

#define HS_CDC_VCOM_INTERRUPT_IN_PACKET_SIZE (16)
#define FS_CDC_VCOM_INTERRUPT_IN_PACKET_SIZE (16)
#define HS_CDC_VCOM_INTERRUPT_IN_INTERVAL (0x07) /* 2^(7-1) = 8ms */
#define FS_CDC_VCOM_INTERRUPT_IN_INTERVAL (0x08)
#define HS_CDC_VCOM_BULK_IN_PACKET_SIZE (512)
#define FS_CDC_VCOM_BULK_IN_PACKET_SIZE (64)
#define HS_CDC_VCOM_BULK_OUT_PACKET_SIZE (512)
#define FS_CDC_VCOM_BULK_OUT_PACKET_SIZE (64)

#define USB_DESCRIPTOR_LENGTH_STRING0 (4)
#define USB_DESCRIPTOR_LENGTH_STRING1 (38)
#define USB_DESCRIPTOR_LENGTH_STRING2 (42)

#define USB_DESCRIPTOR_TYPE_CDC_CS_INTERFACE (0x24)
#define USB_DESCRIPTOR_TYPE_CDC_CS_ENDPOINT (0x25)

#define USB_DEVICE_CLASS (0x02)
#define USB_DEVICE_SUBCLASS (0x00)
#define USB_DEVICE_PROTOCOL (0x00)

#define USB_DEVICE_MAX_POWER (0x32)

#define USB_CDC_VCOM_CIC_CLASS (CDC_COMM_CLASS)
#define USB_CDC_VCOM_CIC_SUBCLASS (USB_CDC_ABSTRACT_CONTROL_MODEL)
#define USB_CDC_VCOM_CIC_PROTOCOL (USB_CDC_NO_CLASS_SPECIFIC_PROTOCOL)

#define USB_CDC_VCOM_DIC_CLASS (CDC_DATA_CLASS)
#define USB_CDC_VCOM_DIC_SUBCLASS (0x00)
#define USB_CDC_VCOM_DIC_PROTOCOL (USB_CDC_NO_CLASS_SPECIFIC_PROTOCOL)

/*******************************************************************************
* API
******************************************************************************/
/*!
 * @brief USB device callback function.
 *
 * This function handles the usb device specific requests.
 *
 * @param handle          The USB device handle.
 * @param event           The USB device event type.
 * @param param           The parameter of the device specific request.
 *
 * @return A USB error code or kStatus_USB_Success.
 */
extern usb_status_t USB_DeviceCallback(usb_device_handle handle, uint32_t event, void *param);

/*!
 * @brief USB device set speed function.
 *
 * This function sets the speed of the USB device.
 *
 * Due to the difference of HS and FS descriptors, the device descriptors and configurations need to be updated to match
 * current speed.
 * As the default, the device descriptors and configurations are configured by using FS parameters for both EHCI and
 * KHCI.
 * When the EHCI is enabled, the application needs to call this fucntion to update device by using current speed.
 * The updated information includes endpoint max packet size, endpoint interval, etc.
 *
 * @param handle The USB device handle.
 * @param speed Speed type. USB_SPEED_HIGH/USB_SPEED_FULL/USB_SPEED_LOW.
 *
 * @return A USB error code or kStatus_USB_Success.
 */
extern usb_status_t USB_DeviceSetSpeed(usb_device_handle handle, uint8_t speed);

#endif /* _USB_DEVICE_DESCRIPTOR_H_ */