* internal, accounts: fix funding check when estimate gas

* accounts, internal: address comments

ethstats: fix reconnection issue, implement primus pings

* Set gasLimit in --dev mode to be 9m.

* core: Set gasLimit to 11.5 milion and add 1 wei allocation for BLAKE2b

* core/vm/runtime/tests: add more benchmarks

* core/vm: initial work on improving alloc count for calls to precompiles

name                                  old time/op    new time/op    delta
SimpleLoop/identity-precompile-10M-6     117ms ±75%      43ms ± 1%  -63.09%  (p=0.008 n=5+5)
SimpleLoop/loop-10M-6                   79.6ms ± 4%    70.5ms ± 1%  -11.42%  (p=0.008 n=5+5)

name                                  old alloc/op   new alloc/op   delta
SimpleLoop/identity-precompile-10M-6    24.4MB ± 0%     4.9MB ± 0%  -79.94%  (p=0.008 n=5+5)
SimpleLoop/loop-10M-6                   13.2kB ± 0%    13.2kB ± 0%     ~     (p=0.357 n=5+5)

name                                  old allocs/op  new allocs/op  delta
SimpleLoop/identity-precompile-10M-6      382k ± 0%      153k ± 0%  -59.99%  (p=0.000 n=5+4)
SimpleLoop/loop-10M-6                     40.0 ± 0%      40.0 ± 0%     ~     (all equal)

* core/vm: don't allocate big.int for touch

name                                  old time/op    new time/op    delta
SimpleLoop/identity-precompile-10M-6    43.3ms ± 1%    42.4ms ± 7%     ~     (p=0.151 n=5+5)
SimpleLoop/loop-10M-6                   70.5ms ± 1%    76.7ms ± 1%   +8.67%  (p=0.008 n=5+5)

name                                  old alloc/op   new alloc/op   delta
SimpleLoop/identity-precompile-10M-6    4.90MB ± 0%    2.46MB ± 0%  -49.83%  (p=0.008 n=5+5)
SimpleLoop/loop-10M-6                   13.2kB ± 0%    13.2kB ± 1%     ~     (p=0.571 n=5+5)

name                                  old allocs/op  new allocs/op  delta
SimpleLoop/identity-precompile-10M-6      153k ± 0%       76k ± 0%  -49.98%  (p=0.029 n=4+4)
SimpleLoop/loop-10M-6                     40.0 ± 0%      40.0 ± 0%     ~     (all equal)

* core/vm: reduce allocs in staticcall

name                                  old time/op    new time/op    delta
SimpleLoop/identity-precompile-10M-6    42.4ms ± 7%    37.5ms ± 6%  -11.68%  (p=0.008 n=5+5)
SimpleLoop/loop-10M-6                   76.7ms ± 1%    69.1ms ± 1%   -9.82%  (p=0.008 n=5+5)

name                                  old alloc/op   new alloc/op   delta
SimpleLoop/identity-precompile-10M-6    2.46MB ± 0%    0.02MB ± 0%  -99.35%  (p=0.008 n=5+5)
SimpleLoop/loop-10M-6                   13.2kB ± 1%    13.2kB ± 0%     ~     (p=0.143 n=5+5)

name                                  old allocs/op  new allocs/op  delta
SimpleLoop/identity-precompile-10M-6     76.4k ± 0%      0.1k ± 0%     ~     (p=0.079 n=4+5)
SimpleLoop/loop-10M-6                     40.0 ± 0%      40.0 ± 0%     ~     (all equal)

* trie: better use of hasher keccakState

* core/state/statedb: reduce allocations in getDeletedStateObject

* core/vm: reduce allocations in all call derivates

* core/vm: reduce allocations in call variants

- Make returnstack `uint32`
- Use a `sync.Pool` of `stack`s

* core/vm: fix tests

* core/vm: goimports

* core/vm: tracer fix + staticcall gas fix

* core/vm: add back snapshot to staticcall

* core/vm: review concerns + make returnstack pooled + enable returndata in traces

* core/vm: fix some test tracer method signatures

* core/vm: run gencodec, minor comment polish
Co-authored-by: NPéter Szilágyi <peterke@gmail.com>

* core: added local tx pool test case

* core, crypto: various allocation savings regarding tx handling

* core/txlist, txpool: save a reheap operation, avoid some bigint allocs
Co-authored-by: NMarius van der Wijden <m.vanderwijden@live.de>

This fixes a corner case in discv5. The issue cannot happen in discv4
because it performs IP checks on all incoming node information.

* modify code owners

* add marius

This change introduces garbage collection for the light client. Historical
chain data is deleted periodically. If you want to disable the GC, use
the --light.nopruning flag.

Fixes #20535
Co-authored-by: NFelix Lange <fjl@twurst.com>

This is a resubmit of ledgerwatch/turbo-geth#556. The performance
benefit of this change is negligible, but it does remove a TODO.

Reverting because this change started handling account balances as
uint64 in the transaction pool, which is incorrect.

This reverts commit af5c97ae.

This fixes two issues with state sync restarts:

When sync restarts with a new root, some peers can have in-flight requests.
Since all peers with active requests were marked idle when exiting sync,
the new sync would schedule more requests for those peers. When the
response for the earlier request arrived, the new sync would reject it and
mark the peer idle again, rendering the peer useless until it disconnected.

The other issue was that peers would not be marked idle when they had
delivered a response, but the response hadn't been processed before
restarting the state sync. This also made the peer useless because it
would be permanently marked busy.
Co-authored-by: NFelix Lange <fjl@twurst.com>

This adds a test suite for discovery v4. The test suite is a port of the Hive suite for
discovery, and will replace the current suite on Hive soon-ish. The tests can be
run locally with this command:

    devp2p discv4 test -remote enode//...
Co-authored-by: NFelix Lange <fjl@twurst.com>

Changes include:
* Updates response docs for `account_new`, `account_list`, `account_signTransaction`
* Removes `account_import`, `account_export` docs
* Adds `account_version` docs
* Updates request docs for `ui_approveListing`, `ui_approveSignData`, `ui_showInfo`, `ui_showError`, `ui_onApprovedTx`
* Adds `ui_approveNewAccount`, `ui_onInputRequired` docs

This change further improves the performance of RLP encoding by removing
allocations for big.Int and [...]byte types. I have added a new benchmark
that measures RLP encoding of types.Block to verify that performance is
improved.

Exposing /debug/metrics and /debug/metrics/prometheus was dependent
on --pprof, which also exposes other HTTP APIs. This change makes it possible
to run the metrics server on an independent endpoint without enabling pprof.

This PR reduces the bandwidth used by the light client to compute the
recommended gas price. The current mechanism for suggesting the price is:

- retrieve recent 20 blocks
- get the lowest gas price of these blocks
- sort the price array and return the middle(60%) one

This works for full nodes, which have all blocks available locally.
However, this is very expensive for the light client because the light
client needs to retrieve block bodies from the network.

The PR changes the default options for light client. With the new config,
the light client only retrieves the two latest blocks, but in order to
collect more sample transactions, the 3 lowest prices are collected from
each block.

This PR also changes the behavior for empty blocks. If the block is empty,
the lastest price is reused for sampling.

* les/checkpointoracle: don't lookup checkpoint more than once per second

* les/checkpoint/oracle: change oracle checktime to 1 minute

* console: prevent importRawKey from getting into CLI history

* internal/ethapi: error on keystore-methods when no keystore is present

* rpc, internal/ethapi: default rpc gascap at 50M + better error message

* eth,internal: make globalgascap uint64

* core/tests: fix compilation failure

* eth/config: gascap at 25M + minor review concerns

* core: use uint64 for total tx costs instead of big.Int

* core: added local tx pool test case

* core, crypto: various allocation savings regarding tx handling

* Update core/tx_list.go

* core: added tx.GasPriceIntCmp for comparison without allocation

adds a method to remove unneeded allocation in comparison to tx.gasPrice

* core: handle pools full of locals better

* core/tests: benchmark for tx_list

* core/txlist, txpool: save a reheap operation, avoid some bigint allocs
Co-authored-by: NMartin Holst Swende <martin@swende.se>

List headers made up 11% of all allocations during sync. This change
removes most of those allocations by keeping the list header values
cached in the encoder buffer instead. Since encoder buffers are pooled,
list headers are no longer allocated in the common case where an
encoder buffer is available for reuse.
Co-authored-by: NFelix Lange <fjl@twurst.com>