- 10 10月, 2022 1 次提交
-
-
由 mysterywolf 提交于
-
- 09 10月, 2022 2 次提交
-
-
由 wannomore 提交于
1. 增加PWM模块的配置kconfig代码 2. 调整目录结构,新增c28x文件夹,将原有tms320f28379的porting移动至c28x文件夹下,通用设备驱动移动至c28x/libraries下 3. 增加gpio驱动代码以及外部中断触发驱动代码 目前已经在tms320f28379上通过测试
-
由 bzrobotics 提交于
-
- 03 10月, 2022 1 次提交
-
-
由 mysterywolf 提交于
* [bsp][sconscript] 整理统一sconscript格式 * update * update
-
- 02 10月, 2022 1 次提交
-
-
由 cy023 提交于
-
- 30 9月, 2022 1 次提交
-
-
由 mysterywolf 提交于
-
- 28 9月, 2022 1 次提交
-
-
由 mysterywolf 提交于
-
- 26 9月, 2022 1 次提交
-
-
由 mysterywolf 提交于
-
- 24 9月, 2022 1 次提交
-
-
由 taiexinleni 提交于
bsp\stm32\libraries\HAL_Drivers\drv_rtc.c在STM32F10x上有一个“RTC首次上电时BKP时钟没使能”的问题。 STM32F10x要求: 写RTC Domain and RTC registers之前需要__HAL_RCC_BKP_CLK_ENABLE(详见:stm32f1xx_hal_rtc.c里面的##### Backup Domain Access #####) 问题分析: 1、RTC首次上电时:由于HAL_RTC_Init初始化之前没有使能BKP时钟,所以对RTC registers的初始化无效。 2、然后用date命令设置时间,调用到set_rtc_time_stamp也没有__HAL_RCC_BKP_CLK_ENABLE,所以HAL_RTCEx_BKUPWrite写的值无法真正永存于BKP,重启后就丢失。 最终导致:对于RTC首次上电的情况,每次重启后RTC_BKP_DR1里的值都不是BKUP_REG_DATA,导致永远无法调用到rt_rtc_f1_bkp_update()去使能BKP时钟。 解决办法: 参考STM32F10x_StdPeriph_Lib_V3.5.0\Project\STM32F10x_StdPeriph_Examples\RTC\Calendar\main.c里面的RTC_Configuration()同时打开RCC_APB1Periph_PWR和RCC_APB1Periph_BKP
-
- 22 9月, 2022 1 次提交
-
-
由 BreederBai 提交于
-
- 20 9月, 2022 3 次提交
-
-
由 mysterywolf 提交于
-
由 liyangyang 提交于
-
由 liyangyang 提交于
-
- 19 9月, 2022 1 次提交
-
-
由 mysterywolf 提交于
* [rtduino][stm32l475-pandora] 重新整理pinout * [rtduino][bluepill] 整理pinout * [rtduino][stm32-f401nucleo]整理pinout * [rtduino][stm32-pandora] 整理pinout * [rtduino][stm32f072]整理pinout
-
- 18 9月, 2022 1 次提交
-
-
由 liyangyang 提交于
-
- 16 9月, 2022 2 次提交
-
-
由 myshowtogo 提交于
修复字符串比较错误
-
由 mysterywolf 提交于
-
- 15 9月, 2022 1 次提交
-
-
由 mysterywolf 提交于
* [rtduino][bluepill] update readme
-
- 11 9月, 2022 1 次提交
-
-
由 傻傻的我 提交于
-
- 09 9月, 2022 4 次提交
-
-
由 傻傻的我 提交于
-
由 liYangYang 提交于
* [RTduino]更新引脚分布 * update * update readme
-
由 mysterywolf 提交于
-
由 嵌入式路上的流浪 提交于
-
- 08 9月, 2022 1 次提交
-
-
由 liyangyang 提交于
-
- 07 9月, 2022 2 次提交
-
-
由 liyangyang 提交于
-
由 Yifang 提交于
* [add] board/Kconfig 完善SPI3部分 * [add] 提交代码注释 Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
-
- 02 9月, 2022 2 次提交
-
-
由 liYangYang 提交于
-
由 鹅福哥 提交于
-
- 01 9月, 2022 1 次提交
-
-
由 liYangYang 提交于
* [pwm]Improve the code * 将与bsp无关的代码移植到框架部分 * 添加注释
-
- 25 8月, 2022 2 次提交
-
-
由 winfenggao 提交于
UART_FLAG_TC 不能在中断里CLEAR; 因为函数 static int stm32_putc(struct rt_serial_device *serial, char c)里发送完成后 while 循环等这个标志退出,中断服务函数CLEAR后,此处进入死循环
-
由 mysterywolf 提交于
增加ROMFS,FATFS和未来的LittleFS将挂载在ROMFS上 初步增加littlefs文件系统,尚未完全实现一键化配置
-
- 22 8月, 2022 2 次提交
-
-
由 mysterywolf 提交于
-
由 mysterywolf 提交于
-
- 16 8月, 2022 2 次提交
-
-
由 liuxianliang 提交于
-
由 mysterywolf 提交于
-
- 15 8月, 2022 1 次提交
-
-
由 mysterywolf 提交于
-
- 14 8月, 2022 2 次提交
-
-
由 Fan Yang 提交于
* Add CANFD support and correct typos - Added CANFD required fields to can.h - Fixed typos in can.h and can.c - Corrected all the projects affected by the typo - Fixed wrong line-ending in some affected can driver files Signed-off-by: NFan YANG <fan.yang@hpmicro.com> * update Signed-off-by: NFan YANG <fan.yang@hpmicro.com> Co-authored-by: Meco Man <920369182@qq.com>
-
由 mysterywolf 提交于
* [lvgl] PKG_USING_LV_MUSIC_DEMO defaults by yes * [lvgl] remove specific suppport for imxrt1060 https://github.com/lvgl/lvgl/pull/3566
-
- 12 8月, 2022 1 次提交
-
-
由 dongly 提交于
-
- 08 8月, 2022 1 次提交
-
-
由 liYang~ 提交于
按照pinout布局图重新设计Arduino引脚布局和功能 - 目前PB0(D12, PWM)和PA15(D5,PWM)测试不通过 参考:https://github.com/stm32duino/Arduino_Core_STM32/issues/1082#issuecomment-634027716
-