[bsp][stm32][stm32f103-dofly-M3S]Add spi sdcard port code

Signed-off-by: NWillian Chan <chentingwei@rt-thread.com>

bsp/stm32/stm32f103-dofly-M3S/board/Kconfig

@@ -7,7 +7,7 @@ config SOC_STM32F103ZE
 
 menu "Onboard Peripheral Drivers"
 
-    config BSP_USING_SDCARD
+    config BSP_USING_SDIO_SDCARD
         bool "Enable SDCARD (sdio)"
         select BSP_USING_SDIO
         select RT_USING_DFS
@@ -15,6 +15,15 @@ menu "Onboard Peripheral Drivers"
         select RT_USING_PIN
         default n
         
+    config BSP_USING_SPI_SDCARD
+        bool "Enable SDCARD (spi2)"
+        select BSP_USING_SPI
+        select BSP_USING_SPI2
+        select RT_USING_SPI_MSD
+        select RT_USING_DFS
+        select RT_USING_DFS_ELMFAT
+        default n
+        
     config BSP_USING_SPI_FLASH
         bool "Enable SPI FLASH (W25Q64 spi2)"
         select BSP_USING_SPI

bsp/stm32/stm32f103-dofly-M3S/board/SConscript

@@ -12,7 +12,10 @@ board.c
 CubeMX_Config/Src/stm32f1xx_hal_msp.c
 ''')
 
-if GetDepend(['BSP_USING_SDCARD']):
+if GetDepend(['BSP_USING_SDIO_SDCARD']):
+    src += Glob('ports/drv_sdcard.c')
+    
+if GetDepend(['BSP_USING_SPI_SDCARD']):
     src += Glob('ports/drv_sdcard.c')
     
 if GetDepend(['BSP_USING_SPI_FLASH']):

bsp/stm32/stm32f103-dofly-M3S/board/ports/drv_sdcard.c

@@ -6,12 +6,12 @@
  * Change Logs:
  * Date           Author        Notes
  * 2018-12-13     balanceTWK    add sdcard port file
+ * 2019-08-23     WillianChan   add spi sdcard port code
  */
 
 #include <rtthread.h>
 
-#ifdef BSP_USING_SDCARD
-
+#if defined BSP_USING_SDIO_SDCARD || defined BSP_USING_SPI_SDCARD
 #include <dfs_elm.h>
 #include <dfs_fs.h>
 #include <dfs_posix.h>
@@ -58,5 +58,16 @@ int stm32_sdcard_mount(void)
     return RT_EOK;
 }
 INIT_APP_EXPORT(stm32_sdcard_mount);
+#endif /* BSP_USING_SDIO_SDCARD || BSP_USING_SPI_SDCARD */
 
-#endif /* BSP_USING_SDCARD */
+#ifdef BSP_USING_SPI_SDCARD
+#include "drv_spi.h"
+#include "spi_msd.h"
+static int rt_hw_spi2_tfcard(void)
+{
+    __HAL_RCC_GPIOC_CLK_ENABLE();
+    rt_hw_spi_device_attach("spi2", "spi20", GPIOD, GPIO_PIN_2);
+    return msd_init("sd0", "spi20");
+}
+INIT_DEVICE_EXPORT(rt_hw_spi2_tfcard);
+#endif /* BSP_USING_SPI_SDCARD */