[bsp][stm32][stm32f767] 修改一系列错误

bsp/stm32/libraries/HAL_Drivers/config/f7/spi_config.h

@@ -37,8 +37,8 @@
     {                                                    \
         .Instance = SPI2,                                \
         .bus_name = "spi2",                              \
-        .dma_rx.dma_rx.dma_rcc = RCC_AHB1ENR_DMA1EN,     \
-        .dma_tx.dma_rx.dma_rcc = RCC_AHB1ENR_DMA1EN,     \
+        .dma_rx.dma_rcc = RCC_AHB1ENR_DMA1EN,     \
+        .dma_tx.dma_rcc = RCC_AHB1ENR_DMA1EN,     \
         .dma_rx.Instance = DMA1_Stream3,                 \
         .dma_rx.channel = DMA_CHANNEL_0,                 \
         .dma_rx.dma_irq = DMA1_Stream3_IRQn,             \

bsp/stm32/libraries/HAL_Drivers/drv_spi.c

@@ -9,9 +9,9 @@
  */
 
 #include "board.h"
-#define RT_USING_SPI  
+
 #ifdef RT_USING_SPI
-#define BSP_USING_SPI1
+
 #if defined(BSP_USING_SPI1) || defined(BSP_USING_SPI2) || defined(BSP_USING_SPI3) || defined(BSP_USING_SPI4) || defined(BSP_USING_SPI5) || defined(BSP_USING_SPI6) 
 /* this driver can be disabled at menuconfig → RT-Thread Components → Device Drivers */
 

bsp/stm32/stm32f767-fire-challenger/board/board.c

@@ -79,7 +79,6 @@ void MX_GPIO_Init(void)
 int board_pin_init(void)
 {
     rt_pin_mode(LED0_PIN, PIN_MODE_OUTPUT);
-    // rt_pin_mode(LED1_PIN, PIN_MODE_OUTPUT);
 
     return 0;
 }

bsp/stm32/stm32f767-fire-challenger/rtconfig.h

@@ -78,7 +78,6 @@
 #define RT_USING_DEVICE_IPC
 #define RT_PIPE_BUFSZ 512
 #define RT_USING_SERIAL
-#define RT_SERIAL_USING_DMA
 #define RT_USING_PIN
 
 /* Using WiFi */